Summary:
We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers.
This change does several things:
* Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\*
* Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access.
* We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.)
* For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in.
* The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases.
* The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix.
* Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460
Test Plan:
unit tests updated, including updating many to pop the stat value since last read to improve test
readability and maintainability.
Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED).
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
```
And run simultaneous before&after with
```
TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics
```
Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec
After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec
Reviewed By: ajkr
Differential Revision: D46029177
Pulled By: pdillinger
fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822
Summary:
Apply a small (and automatic) set of IntelliJ Java inspections/repairs to the Java interface to RocksDB Java and its tests.
Partly enabled by the fact that we now (from RocksDB7) require java 8.
Explicit <p> in empty lines in javadoc comments.
Parameters and variables made final where possible.
Anonymous subclasses converted lambdas.
Some tests which previously used other assertion models were converted to assertj, e.g. (assertThat(actual).isEqualTo(expected)
In a very few cases tests were found to be inoperative or broken, and were repaired. No problems with actual RocksDB behaviour were observed.
This PR is intended to replace https://github.com/facebook/rocksdb/pull/9618 - that PR was not merged, and attempts to rebase it have yielded a questionable looking diff, so we choose to go back to square 1 here, and implement a conservative set of changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10951
Reviewed By: anand1976
Differential Revision: D45057849
Pulled By: ajkr
fbshipit-source-id: e4ea46bfc80518ae86f37702b03ca9352bc11c3d
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
This patch adds support to write and read a user-defined timestamp size record in log writer and log reader. It will be used by WAL logs to persist the user-defined timestamp format for subsequent WriteBatch records. Reading and writing UDT sizes for WAL logs are not included in this patch. It will be in a follow up.
The syntax for the record is: at write time, one such record is added when log writer encountered any non-zero UDT size it hasn't recorded so far. At read time, all such records read up to a point are accumulated and applicable to all subsequent WriteBatch records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11433
Test Plan:
```
make clean && make -j32 all
./log_test --gtest_filter="*WithTimestampSize*"
```
Reviewed By: ltamasi
Differential Revision: D45678708
Pulled By: jowlyzhang
fbshipit-source-id: b770c8f45bb7b9383b14aac9f22af781304fb41d
Summary:
Context:
This pull request update is in response to a comment made on https://github.com/facebook/rocksdb/pull/8596#discussion_r680264932. The current implementation of RefillBytesAndGrantRequestsLocked() drains all available_bytes, but the first request after the last wave of requesting/bytes granting is done is not being handled in the same way.
This creates a scenario where if a request for a large amount of bytes is enqueued first, but there are not enough available_bytes to fulfill it, the request is put to sleep until the next refill time. Meanwhile, a later request for a smaller number of bytes comes in and is granted immediately. This behavior is not fair as the earlier request was made first.
To address this issue, we have made changes to the code to exhaust the remaining available bytes from the request and queue the remaining. With this change, requests are granted in the order they are received, ensuring that earlier requests are not unfairly delayed by later, smaller requests. The specific scenario described above will no longer occur with this change. Also consolidated `granted` and `request_bytes` as part of the change since `granted` is equivalent to `request_bytes == 0`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11425
Test Plan: Added `AvailableByteSizeExhaustTest`
Reviewed By: hx235
Differential Revision: D45570711
Pulled By: jaykorean
fbshipit-source-id: a7117ed17bf4b8a7ae0f76124cb41902db1a2592
Summary:
**Background** - runtime detection of certain x86 CPU features was added for optimizing CRC32c checksums, where performance is dramatically affected by the availability of certain CPU instructions and code using intrinsics for those instructions. And Java builds with native library try to be broadly compatible but performant.
What has changed is that CRC32c is no longer the most efficient cheecksum on contemporary x86_64 hardware, nor the default checksum. XXH3 is generally faster and not as dramatically impacted by the availability of certain CPU instructions. For example, on my Skylake system using db_bench (similar on an older Skylake system without AVX512):
PORTABLE=1 empty USE_SSE : xxh3->8 GB/s crc32c->0.8 GB/s (no SSE4.2 nor AVX2 instructions)
PORTABLE=1 USE_SSE=1 : xxh3->19 GB/s crc32c->16 GB/s (with SSE4.2 and AVX2)
PORTABLE=0 USE_SSE ignored: xxh3->28 GB/s crc32c->16 GB/s (also some AVX512)
Testing a ~10 year old system, with SSE4.2 but without AVX2, crc32c is a similar speed to the new systems but xxh3 is only about half that speed, also 8GB/s like the non-AVX2 compile above. Given that xxh3 has specific optimization for AVX2, I think we can infer that that crc32c is only fastest for that ~2008-2013 period when SSE4.2 was included but not AVX2. And given that xxh3 is only about 2x slower on these systems (not like >10x slower for unoptimized crc32c), I don't think we need to invest too much in optimally adapting to these old cases.
x86 hardware that doesn't support fast CRC32c is now extremely rare, so requiring a custom build to support such hardware is fine IMHO.
**This change** does two related things:
* Remove runtime CPU detection for optimizing CRC32c on x86. Maintaining this code is non-zero work, and compiling special code that doesn't work on the configured target instruction set for code generation is always dubious. (On the one hand we have to ensure the CRC32c code uses SSE4.2 but on the other hand we have to ensure nothing else does.)
* Detect CPU features in source code, not in build scripts. Although there are some hypothetical advantages to detectiong in build scripts (compiler generality), RocksDB supports at least three build systems: make, cmake, and buck. It's not practical to support feature detection on all three, and we have suffered from missed optimization opportunities by relying on missing or incomplete detection in cmake and buck. We also depend on some components like xxhash that do source code detection anyway.
**In more detail:**
* `HAVE_SSE42`, `HAVE_AVX2`, and `HAVE_PCLMUL` replaced by standard macros `__SSE4_2__`, `__AVX2__`, and `__PCLMUL__`.
* MSVC does not provide high fidelity defines for SSE, PCLMUL, or POPCNT, but we can infer those from `__AVX__` or `__AVX2__` in a compatibility header. In rare cases of false negative or false positive feature detection, a build engineer should be able to set defines to work around the issue.
* `__POPCNT__` is another standard define, but we happen to only need it on MSVC, where it is set by that compatibility header, or can be set by the build engineer.
* `PORTABLE` can be set to a CPU type, e.g. "haswell", to compile for that CPU type.
* `USE_SSE` is deprecated, now equivalent to PORTABLE=haswell, which roughly approximates its old behavior.
Notably, this change should enable more builds to use the AVX2-optimized Bloom filter implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11419
Test Plan:
existing tests, CI
Manual performance tests after the change match the before above (none expected with make build).
We also see AVX2 optimized Bloom filter code enabled when expected, by injecting a compiler error. (Performance difference is not big on my current CPU.)
Reviewed By: ajkr
Differential Revision: D45489041
Pulled By: pdillinger
fbshipit-source-id: 60ceb0dd2aa3b365c99ed08a8b2a087a9abb6a70
Summary:
## Option API updates
* Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7.
* Remove unnecessary constructor for CompressionOptions.
* Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated).
## Stat API updates
* Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed.
* Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing.
* New or existing tickers relevant to compression:
* BYTES_COMPRESSED_FROM
* BYTES_COMPRESSED_TO
* BYTES_COMPRESSION_BYPASSED
* BYTES_COMPRESSION_REJECTED
* COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing)
* NUMBER_BLOCK_COMPRESSED (existing)
* NUMBER_BLOCK_COMPRESSION_BYPASSED
* NUMBER_BLOCK_COMPRESSION_REJECTED
* BYTES_DECOMPRESSED_FROM
* BYTES_DECOMPRESSED_TO
We can compute a number of things with these stats:
* "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO
* Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED)
* Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED
* Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES
Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression.
## BlockBasedTableBuilder
Various small refactorings, optimizations, and name clean-ups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388
Test Plan:
unit tests added
* `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field.
Reviewed By: ajkr
Differential Revision: D45128202
Pulled By: pdillinger
fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
Summary:
util/ribbon_test.cc: avoid ambiguous reversed operator error in c++20 (and enable checking for the error)
Code would produce errors like this, when compiled with -Wambiguous-reversed-operator under c++20.
```
util/ribbon_test.cc:695:20: error: ISO C++20 considers use of overloaded operator '!=' (with operand types 'KeyGen' (aka '(anonymous namespace)::StandardKeyGen') and 'KeyGen') to be ambiguou
s despite there being a unique best viable function with non-reversed arguments [-Werror,-Wambiguous-reversed-operator]
while (cur != batch_end) {
~~~ ^ ~~~~~~~~~
util/ribbon_test.cc:111:8: note: candidate function with non-reversed arguments
bool operator!=(const StandardKeyGen& other) {
^
util/ribbon_test.cc:107:8: note: ambiguous candidate function with reversed arguments
bool operator==(const StandardKeyGen& other) {
^
```
This will become a hard error in future standards.
Confirmed that no errors were generated when building using clang and c++20:
```
USE_CLANG=1 USE_COROUTINES=1 make
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11371
Reviewed By: meyering
Differential Revision: D44921027
Pulled By: cbi42
fbshipit-source-id: ef25b78260920a4d75a718310688d3a2487ffa87
Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions.
This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231
Test Plan: updated unit test
Reviewed By: akankshamahajan15
Differential Revision: D43396607
Pulled By: ajkr
fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
Summary:
The files in `port/`, such as `port_posix.h`, are layering over the system libraries, so shouldn't include the DB-specific files like `options.h`. This PR remove this dependency.
# How
The reason that `port_posix.h` (or `port_win.h`) include `options.h` is to use `CpuPriority`, as there is a method `SetCpuPriority()` in `port_posix.h` that uses `CpuPriority.`
- I think `SetCpuPriority()` make sense to exist in `port_posix.h` as it provides has platform-dependent implementation
- `CpuPriority` enum is defined in `env.h`, but used in `rocksdb/include` and `port/`.
Hence, let us define `CpuPriority` enum in a common file, say `port_defs.h`, such that both directories `rocksdb/include` and `port/` can include.
When we remove this dependency, some other files have compile errors because they can't find definitions, so add header files to resolve
# Test
make all check -j
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11214
Reviewed By: pdillinger
Differential Revision: D43196910
Pulled By: guowentian
fbshipit-source-id: 70deccb72844cfb08fcc994f76c6ef6df5d55ab9
Summary:
In anticipation of using this to represent sets of CacheEntryRole for including or excluding kinds of blocks in block cache tiers, add significant new features to SmallEnumSet, including at least:
* List initialization
* Applicative constexpr operations
* copy/move/equality ops
* begin/end/const_iterator for iteration
* Better comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11178
Test Plan: unit tests added/expanded
Reviewed By: ltamasi
Differential Revision: D42973723
Pulled By: pdillinger
fbshipit-source-id: 40783486feda931c3f7c6fcc9a300acd6a4b0a0a
Summary:
Fix a bug in the calculation of the input buffer address/offset in log_reader.cc. The bug is when consecutive fragments of a compressed record are located at the same offset in the log reader buffer, the second fragment input buffer is treated as a leftover from the previous input buffer. As a result, the offset in the `ZSTD_inBuffer` is not reset.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11198
Test Plan: Add a unit test in log_test.cc that fails without the fix and passes with it.
Reviewed By: ajkr, cbi42
Differential Revision: D43102692
Pulled By: anand1976
fbshipit-source-id: aa2648f4802c33991b76a3233c5a58d4cc9e77fd
Summary:
Currently, we incorrectly return a Status::Corruption to the MultiGet caller if the file system ReadAsync cannot issue a read and returns an error for some reason, such as IOStatus::NotSupported(). In this PR, we copy the ReadAsync error to the request status so it can be returned to the user.
Tests:
Update existing unit tests and add a new one for this scenario
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11171
Reviewed By: akankshamahajan15
Differential Revision: D42950057
Pulled By: anand1976
fbshipit-source-id: 85ffcb015fa6c064c311f8a28488fec78c487869
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Like other versions before, gcc 13 moved some includes around and as a result <cstdint> is no longer transitively included [1]. Explicitly include it for uint{32,64}_t.
[1] https://gcc.gnu.org/gcc-13/porting_to.html#header-dep-changes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11118
Reviewed By: cbi42
Differential Revision: D42711356
Pulled By: ajkr
fbshipit-source-id: 5ea257b85b7017f40fd8fdbce965336da95c55b2
Summary:
Upgrading xxhash.h to latest dev version as of 1/17/2023, which is d7197ddea81364a539051f116ca77926100fc77f This should improve performance on some ARM machines.
I allowed some of our RocksDB-specific changes to be made obsolete where it seemed appropriate, for example
* xxhash.h has its own fallthrough marker (which I hope works for us)
* As in https://github.com/Cyan4973/xxHash/pull/549
Merging and resolving conflicts one way or the other was all that went into this diff. Except I had to mix the two sides around `defined(__loongarch64)`
How I did the upgrade (for future reference), so that I could use usual merge conflict resolution:
```
# New branch to help with merging
git checkout -b xxh_merge_base
# Check out RocksDB revision before last xxhash.h upgrade
git reset --hard 22161b7547652af82a5dc67458de9ca8946ac83d^
# Create a commit with the raw base version from xxHash repo (from xxHash repo)
git show 2c611a76f914828bed675f0f342d6c4199ffee1e:xxhash.h > ../rocksdb/util/xxhash.h
# In RocksDB repo
git commit -a
# Merge in the last xxhash.h upgrade
git merge 22161b7547
# Resolve conflict using committed version
git show 22161b7547652af82a5dc67458de9ca8946ac83d:util/xxhash.h > util/xxhash.h
git commit -a
# Catch up to upstream
git merge upstream/main
# Create a different branch for applying raw upgrade
git checkout -b xxh_upgrade_2023
# Find the RocksDB commit we made for the raw base version from xxHash
git log main..HEAD
# Rewind to it
git reset --hard 2428b727a9a19c6078bb75895805d7488cbdd08c
# Copy in latest raw version (from xxHash repo)
cat xxhash.h > ../rocksdb/util/xxhash.h
# Merge in RocksDB changes, use typical tools for conflict resolution
git merge xxh_merge_base
```
Branch https://github.com/facebook/rocksdb/tree/xxhash_merge_base can be used as a base for future xxhash merges.
Fixes https://github.com/facebook/rocksdb/issues/11073
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11098
Test Plan:
existing tests (e.g. Bloom filter schema stability tests)
Also seems to include a small performance boost on my Intel dev machine, using `./db_bench --benchmarks=xxh3[-X50] 2>&1 | egrep -o 'operations;.*' | sort`
Fastest out of 50 runs, before: 15477.3 MB/s
Fastest out of 50 runs, after: 15850.7 MB/s, and 11 more runs faster than the "before" number
Slowest out of 50 runs, before: 12267.5 MB/s
Slowest out of 50 runs, after: 13897.1 MB/s
More repetitions show the distinction is repeatable
Reviewed By: hx235
Differential Revision: D42560010
Pulled By: pdillinger
fbshipit-source-id: c43ee52f1c5fe0ba3d6d6e4eebb22ded5f5492ea
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).
The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.
* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)
## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
* Simpler for implementations to deal with just one Insert and one Lookup.
* Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
* Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
* Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
* It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
* I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.
## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).
The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.
These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)
Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.
## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.
## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.
The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.
## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)
## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975
Test Plan:
tests updated
Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):
34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83
Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.
Reviewed By: anand1976
Differential Revision: D42417818
Pulled By: pdillinger
fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
Summary:
Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure:
* Magic number error is reported first if we attempt to open an SST file and the footer is completely bad.
* Footer errors are reported with affected file.
* If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009
Test Plan:
unit tests added, some manual
Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed).
Reviewed By: siying
Differential Revision: D41656272
Pulled By: pdillinger
fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df
Summary:
Hello,
As discussed previously in this [discussion](https://github.com/facebook/rocksdb/pull/9680#discussion_r853105163), the mentioned PR introduced a regression in portable versions that compile with MSVC - crc_3way optimization won't be used even in cases where it is supported.
This PR aims to fix just that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10667
Reviewed By: akankshamahajan15
Differential Revision: D40644592
Pulled By: ajkr
fbshipit-source-id: dadbeb10d57c19800e74288258ec3b96095557dd
Summary:
Complements https://github.com/facebook/rocksdb/issues/10867 with some manual edits to avoid weird formatting or to avoid massive reformatting third party code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10870
Test Plan: `make check` etc
Reviewed By: riversand963
Differential Revision: D40686526
Pulled By: pdillinger
fbshipit-source-id: 6af988fe4b0a8ae4a5992ec2c3c37fe67584226e
Summary:
This is purely the result of running `clang-format -i` on files, except some files have been excluded for manual intervention in a separate PR
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10867
Test Plan: `make check`, `make check-headers`, `make format`
Reviewed By: jay-zhuang
Differential Revision: D40682086
Pulled By: pdillinger
fbshipit-source-id: 8673d978553ab99b516da7fb63ba0b82523337f8
Summary:
Right now UserComparatorWrapper is a Customizable object, although it is not, which introduces some intialization overhead for the object. In some benchmarks, it shows up in CPU profiling. Make it not configurable by defining most functions needed by UserComparatorWrapper to an interface and implement the interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10837
Test Plan: Make sure existing tests pass
Reviewed By: pdillinger
Differential Revision: D40528511
fbshipit-source-id: 70eaac89ecd55401a26e8ed32abbc413a9617c62
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
Older versions of gflags do not have `DEFINE_uint32` and `DECLARE_uint32`. In util/gflag_compat.h, we already add a hack for `DEFINE_uint32`. This PR adds a hack for `DECLARE_uint32`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10729
Test Plan:
ROCKSDB_NO_FBCODE=1 make V=1 -j16 db_stress
make check
Resolves https://github.com/facebook/rocksdb/issues/10704
Reviewed By: pdillinger
Differential Revision: D39789183
Pulled By: riversand963
fbshipit-source-id: a58747e0163dcf55dd762733aa5c40d8f0ae70a6
Summary:
This should fix an import issue detected in meta internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10604
Test Plan: Unit Tests.
Reviewed By: hx235
Differential Revision: D39120414
Pulled By: gitbw95
fbshipit-source-id: dbd016d7f47b9f54aab5ea61e8d3cd79734f46af
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519
Reviewed By: jay-zhuang
Differential Revision: D38603291
fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
Right now db_bench -use_stderr_info_logger would redirect RocksDB info logging to stderr but no timetamp is printed out. Add timestamp to there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10435
Test Plan: Run "db_bench -use_stderr_info_logger"
Reviewed By: riversand963
Differential Revision: D38258699
fbshipit-source-id: 3fee6eb1205127b923bc6a660f86bd2742519aec
Summary:
Travis CI is depreciated and haven't been maintained for some time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10407
Reviewed By: ajkr
Differential Revision: D38078382
Pulled By: jay-zhuang
fbshipit-source-id: f42057f2f41f722bdce56bf195f67a94835191fb
Summary:
Made locking strict for all accesses of `GenericRateLimiter` internal state.
`SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation.
The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374
Reviewed By: pdillinger
Differential Revision: D37906367
Pulled By: ajkr
fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5
Summary:
(PR created for informational/testing purposes only.)
- Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()`
- Benefit over #10374 is eliminating race conditions with Configurable framework.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378
Reviewed By: pdillinger
Differential Revision: D37914865
fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
InternalKeyComparator is an internal class which is a simple wrapper of Comparator. https://github.com/facebook/rocksdb/pull/8336 made Comparator customizeable. As a side effect, internal key comparator was made configurable too. This introduces overhead to this simple wrapper. For example, every InternalKeyComparator will have an std::vector attached to it, which consumes memory and possible allocation overhead too.
We remove InternalKeyComparator from being customizable by making InternalKeyComparator not a subclass of Comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10342
Test Plan: Run existing CI tests and make sure it doesn't fail
Reviewed By: riversand963
Differential Revision: D37771351
fbshipit-source-id: 917256ee04b2796ed82974549c734fb6c4d8ccee
Summary:
Enabled zstd checksum flag in StreamingCompress so that WAL (de)compreression is protected by a checksum per compression frame.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10319
Test Plan:
- `make check`
- WAL perf: average ops/sec over 10 runs is 161226 pre PR and 159635 post PR (1% drop).
```
sudo TEST_TMPDIR=/dev/shm/memtable_write ./db_bench_checksum -benchmarks=fillseq -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=10 -wal_compression=zstd
```
Reviewed By: ajkr
Differential Revision: D37673311
Pulled By: cbi42
fbshipit-source-id: 9f34a3bfc2a82e5c80b1ec63bb339a7465108ec9
Summary:
Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278
Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions.
Reviewed By: hx235
Differential Revision: D37640946
Pulled By: littlepig2013
fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367
Summary:
With https://github.com/facebook/rocksdb/pull/9996 , we can pass the rate_limiter_priority to FS for most cases. This PR is to update the code path for filter block reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10251
Test Plan: Current unit tests should pass.
Reviewed By: pdillinger
Differential Revision: D37427667
Pulled By: gitbw95
fbshipit-source-id: 1ce5b759b136efe4cfa48a6b97e2f837ff087433
Summary:
folly DistributedMutex is faster than standard mutexes though
imposes some static obligations on usage. See
https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h
for details. Here we use this alternative for our Cache implementations
(especially LRUCache) for better locking performance, when RocksDB is
compiled with folly.
Also added information about which distributed mutex implementation is
being used to cache_bench output and to DB LOG.
Intended follow-up:
* Use DMutex in more places, perhaps improving API to support non-scoped
locking
* Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently)
Credit: Thanks Siying for reminding me about this line of work that was previously
left unfinished.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179
Test Plan:
for correctness, existing tests. CircleCI config updated.
Also Meta-internal buck build updated.
For performance, ran simultaneous before & after cache_bench. Out of three
comparison runs, the middle improvement to ops/sec was +21%:
Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode
compiler)
```
Complete in 20.201 s; Rough parallel ops/sec = 1584062
Thread ops/sec = 107176
Operation latency (ns):
Count: 32000000 Average: 9257.9421 StdDev: 122412.04
Min: 134 Median: 3623.0493 Max: 56918500
Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63
```
New: (add USE_FOLLY=1)
```
Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%)
Thread ops/sec = 135487
Operation latency (ns):
Count: 32000000 Average: 7304.9294 StdDev: 108530.28
Min: 132 Median: 3777.6012 Max: 91030902
Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83
```
Reviewed By: anand1976
Differential Revision: D37182983
Pulled By: pdillinger
fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1
Peter Dillinger