Summary:
Especially with non-integral bits/key now supported,
db_crashtest should vary the bloom_bits configuration. The probabilities
look like this:
1/2 chance of a uniform int from 0 to 19. This includes overall 1/40
chance of 0 which disables the bloom filter.
1/2 chance of a float from a lognormal distribution with a median of 10.
This always produces positive values but with a decent chance of < 1
(overall ~1/40) or > 100 (overall ~1/40), the enforced/coerced
implementation limits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6103
Test Plan:
start 'make blackbox_crash_test' several times and look at
configuration output
Differential Revision: D18734877
Pulled By: pdillinger
fbshipit-source-id: 4a38cb057d3b3fc1327f93199f65b9a9ffbd7316
Summary:
format_version=5 enables new Bloom filter. Using 2/5
probability for "latest and greatest" rather than naive 1/4.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6102
Test Plan: start 'make blackbox_crash_test'
Differential Revision: D18735685
Pulled By: pdillinger
fbshipit-source-id: e81529c8a3f53560d246086ee5f92ee7d79a2eab
Summary:
Right now, crash_test always uses 16KB max_manifest_file_size value. It is good to cover logic of manifest file switch. However, information stored in manifest files might be useful in debugging failures. Switch to only use small manifest file size in 1/15 of the time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6034
Test Plan: Observe command generated by db_crash_test.py multiple times and see the --max_manifest_file_size value distribution.
Differential Revision: D18513824
fbshipit-source-id: 7b3ae6dbe521a0918df41064e3fa5ecbf2466e04
Summary:
A recent commit make periodic compaction option valid in FIFO, which means TTL. But we fail to disable it in crash test, causing assert failure. Fix it by having it disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5993
Test Plan: Restart "make crash_test" many times and make sure --periodic_compaction_seconds=0 is always the case when --compaction_style=2
Differential Revision: D18263223
fbshipit-source-id: c91a802017d83ae89ac43827d1b0012861933814
Summary:
Recently, pipelined write is enabled even if atomic flush is enabled, which causing sanitizing failure in db_stress. Revert this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5986
Test Plan: Run "make crash_test_with_atomic_flush" and see it to run for some while so that the old sanitizing error (which showed up quickly) doesn't show up.
Differential Revision: D18228278
fbshipit-source-id: 27fdf2f8e3e77068c9725a838b9bef4ab25a2553
Summary:
In pipeline writing mode, memtable switching needs to wait for memtable writing to finish to make sure that when memtables are made immutable, inserts are not going to them. This is currently done in DBImpl::SwitchMemtable(). This is done after flush_scheduler_.TakeNextColumnFamily() is called to fetch the list of column families to switch. The function flush_scheduler_.TakeNextColumnFamily() itself, however, is not thread-safe when being called together with flush_scheduler_.ScheduleFlush().
This change provides a fix, which moves the waiting logic before flush_scheduler_.TakeNextColumnFamily(). WaitForPendingWrites() is a natural place where the logic can happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5716
Test Plan: Run all tests with ASAN and TSAN.
Differential Revision: D18217658
fbshipit-source-id: b9c5e765c9989645bf10afda7c5c726c3f82f6c3
Summary:
This is the 2nd attempt after the revert of https://github.com/facebook/rocksdb/pull/4020
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5895
Test Plan:
```
./tools/db_crashtest.py blackbox --simple --interval=10 --max_key=10000000
```
Differential Revision: D17822137
Pulled By: maysamyabandeh
fbshipit-source-id: 3d148c0d8cc129080410ff859c04b544223c8ea3
Summary:
For now, crash_test is not able to report any failure for the logic related to iterator upper, lower bounds or iterators, or reseek. These are features prone to errors. Improve db_stress in several ways:
(1) For each iterator run, reseek up to 3 times.
(2) For every iterator, create control iterator with upper or lower bound, with total order seek. Compare the results with the iterator.
(3) Make simple crash test to avoid prefix size to have more coverage.
(4) make prefix_size = 0 a valid size and -1 to indicate disabling prefix extractor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5846
Test Plan: Manually hack the code to create wrong results and see they are caught by the tool.
Differential Revision: D17631760
fbshipit-source-id: acd460a177bd2124a5ffd7fff490702dba63030b
Summary:
PR https://github.com/facebook/rocksdb/issues/4020 enabled partitioned indexes/filters in stress tests; however,
this causes assertion failures in BatchedOpsStressTest. This patch
disables them until we can root cause the failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5811
Test Plan: Ran the script and made sure it only uses the binary search index.
Differential Revision: D17399366
Pulled By: ltamasi
fbshipit-source-id: adb116e6297f9c6ccd7ac15b6a16c9aa91f21ac5
Summary:
PR https://github.com/facebook/rocksdb/issues/4020 implicitly enabled the hash index as well in stress/crash
tests, resulting in assertion failures in Block. This patch disables
the hash index until we can pinpoint the root cause of these issues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5792
Test Plan:
Ran tools/db_crashtest.py and made sure it only uses index types 0 and 2
(binary search and partitioned index).
Differential Revision: D17346777
Pulled By: ltamasi
fbshipit-source-id: b4318f37f1fda3ee1bbff4ef2c2f556ca9e6b551
Summary:
- In `db_stress`, support choosing index type and whether to enable filter partitioning, and randomly set those options in crash test
- When partitioned filter is enabled by crash test, force partitioned index to also be enabled since it's a prerequisite
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4020
Test Plan:
currently this is blocked on fixing the bug that crash test caught:
```
$ TEST_TMPDIR=/data/compaction_bench python ./tools/db_crashtest.py blackbox --simple --interval=10 --max_key=10000000
...
Verification failed for column family 0 key 937501: Value not found: NotFound:
Crash-recovery verification failed :(
```
Differential Revision: D8508683
Pulled By: maysamyabandeh
fbshipit-source-id: 0337e5d0558bcef26b1f3699f47265a2c1e99629
Summary:
https://github.com/facebook/rocksdb/pull/5741 added compaction TTL to crash test, but it causes assertion fails for FIFO compaction. Disable this combination for now while we debug the assertion failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5749
Test Plan: Run crash test and observe that when compaction_style=2, compaction_ttl is always 0.
Differential Revision: D17078292
fbshipit-source-id: 446821a3b9739956094d5e4f9be1251a15b57f5d
Summary:
Covering periodic compaction and compaction TTL can help us expose potential issues. Add it there.
Randomly select value for these two options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5741
Test Plan: Run crash_test and see the perameters generated.
Differential Revision: D17059515
fbshipit-source-id: 8213974846a0b6a22fc13be705825c9054d1d097
Summary:
AtomicFlushStressTest is a powerful test, but right now we only run it for atomic_flush=true + disable_wal=true. We further extend it to the case where atomic_flush=false + disable_wal = false. All the workload generation and validation can stay the same.
Atomic flush crash test is also changed to switch between the two test scenarios. It makes the name "atomic flush crash test" out of sync from what it really does. We leave it as it is to avoid troubles with continous test set-up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5729
Test Plan: Run "CRASH_TEST_KILL_ODD=188 TEST_TMPDIR=/dev/shm/ USE_CLANG=1 make whitebox_crash_test_with_atomic_flush", observe the settings used and see it passed.
Differential Revision: D16969791
fbshipit-source-id: 56e37487000ae631e31b0100acd7bdc441c04163
Summary:
Atomic white box test's kill odd is the same as normal test. However, in the scenario that only WritableFileWriter::Append() is blacklisted, WritableFileWriter::Flush() dominates the killing odds. Normally, most of WritableFileWriter::Flush() are called in WAL writes, where every write triggers a WAL flush. In atomic test, WAL is disabled, so the kill happens less frequently than we antipated. In some rare cases, the kill didn't end up with happening (for reasons I still don't fully understand) and cause the stress test timeout.
If WAL is disabled, make the odds 5x likely to trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5717
Test Plan: Run whitebox_crash_test_with_atomic_flush and whitebox_crash_test and observe the kill odds printed out.
Differential Revision: D16897237
fbshipit-source-id: cbf5d96f6fc0e980523d0f1f94bf4e72cdb82d1c
Summary:
Atomic flush test started to fail after https://github.com/facebook/rocksdb/issues/5099. Then https://github.com/facebook/rocksdb/issues/5278 provided a fix after
which the same error occurred much less frequently. However it still occur
occasionally. Not sure what the root cause is. This PR disables the feature of
snapshot list refresh, and we should keep an eye on the failure in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5581
Differential Revision: D16295985
Pulled By: riversand963
fbshipit-source-id: c9e62e65133c52c21b07097de359632ca62571e4
Summary:
The tsan crash tests are failing with a data race compliant with pipelined write option. Temporarily disable it until its concurrency issue are fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5445
Differential Revision: D15783824
Pulled By: maysamyabandeh
fbshipit-source-id: 413a0c3230b86f524fc7eeea2cf8e8375406e65b
Summary:
This PR fixes a couple of bugs in FilePickerMultiGet that were causing db_stress test failures. The failures were caused by -
1. Improper handling of a key that matches the user key portion of an L0 file's largest key. In this case, the curr_index_in_curr_level file index in L0 for that key was getting incremented, but batch_iter_ was not advanced. By design, all keys in a batch are supposed to be checked against an L0 file before advancing to the next L0 file. Not advancing to the next key in the batch was causing a double increment of curr_index_in_curr_level due to the same key being processed again
2. Improper handling of a key that matches the user key portion of the largest key in the last file of L1 and higher. This was resulting in a premature end to the processing of the batch for that level when the next key in the batch is a duplicate. Typically, the keys in MultiGet will not be duplicates, but its good to handle that case correctly
Test -
asan_crash
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5292
Differential Revision: D15282530
Pulled By: anand1976
fbshipit-source-id: d1a6a86e0af273169c3632db22a44d79c66a581f
Summary:
Disable it for now until we can get stress tests to pass consistently.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5284
Differential Revision: D15230727
Pulled By: anand1976
fbshipit-source-id: 239baacdb3c4cd4fb7c4447f7582b9042501d752
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
The new option will pick a batch size randomly in the range 1-64. It will then space the keys in the batch by random intervals.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5264
Differential Revision: D15175522
Pulled By: anand1976
fbshipit-source-id: c16baa69d0f1ff4cf53c55c813ddd82c8aeb58fc
Summary:
At least one of the meta-block loading functions (`ReadRangeDelBlock`)
uses the same block reading function (`NewDataBlockIterator`) as data
block reads, which means it uses the dictionary handle. However, the
dictionary handle was uninitialized while reading meta-blocks, causing
readers to receive an error. This situation was only noticed when
`cache_index_and_filter_blocks=true`.
This PR initializes the handle to null while reading meta-blocks to
prevent the error. It also adds support to `db_stress` /
`db_crashtest.py` for `cache_index_and_filter_blocks`.
Fixes#5263.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5267
Differential Revision: D15149264
Pulled By: maysamyabandeh
fbshipit-source-id: 991d38a306c62db5976778bfb050fa3cd4a0671b
Summary:
Since currently pipelined write allows one thread to perform memtable writes
while another thread is traversing the `flush_scheduler_`, it will cause an
assertion failure in `FlushScheduler::Clear`. To unblock crash recoery tests,
we temporarily disable pipelined write when atomic flush is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5266
Differential Revision: D15142285
Pulled By: riversand963
fbshipit-source-id: a0c20fe4ac543e08feaed602414f982054df7831
Summary:
Since this feature affects the WAL behavior, it seems important our crash-recovery tests cover it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5070
Differential Revision: D14470085
Pulled By: miasantreble
fbshipit-source-id: 9b9682a718a926d57d055e0a5ec867efbd2eb9c1
Summary:
Previously `finalize_and_sanitize` function was always zeroing out `compression_zstd_max_train_bytes`. It was only supposed to do that when non-ZSTD compression was used. But since `--compression_type` was an unknown argument (i.e., one that `db_crashtest.py` does not recognize and blindly forwards to `db_stress`), `finalize_and_sanitize` could not tell whether ZSTD was used. This PR fixes it simply by making `--compression_type` a known argument with snappy as default (same as `db_stress`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4957
Differential Revision: D13994302
Pulled By: ajkr
fbshipit-source-id: 1b0baea7331397822830970d3698642eb7a7df65
Summary:
Separate flag for enabling option from flag for enabling dedicated atomic stress test. I have found setting the former without setting the latter can detect different problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4781
Differential Revision: D13463211
Pulled By: ajkr
fbshipit-source-id: 054f777885b2dc7d5ea99faafa21d6537eee45fd
Summary:
The default for index_block_restart_interval is 1 but some use 16 in production. The patch extends crash test to test both values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4383
Differential Revision: D9887304
Pulled By: maysamyabandeh
fbshipit-source-id: a8d00fea974a79ad563f9f4d9d7b069e9f746a8f
Summary:
- Add `--compression_max_dict_bytes` and `--compression_zstd_max_train_bytes` flags to stress test
- Randomly enable/disable the above flags in crash test
- Set `--compression_type=zstd` in FB-specific crash test runs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4234
Differential Revision: D9187207
Pulled By: ajkr
fbshipit-source-id: 8d78cf8d8e1165f2cd1c32e069b73726b5bc1fd2
Summary:
db_stress doesn't cover upper or lower bound in iterators. Try to cover it by randomly assigning a random one. Also in prefix scan tests, with 50% of the chance, set next prefix as the upper bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4162
Differential Revision: D8953507
Pulled By: siying
fbshipit-source-id: f0f04e9cb6c07cbebbb82b892ca23e0daeea708b
Summary:
Add the `backup_one_in` and `checkpoint_one_in` options to periodically trigger backups and checkpoints. The directory names contain thread ID to avoid clashing with parallel backups/checkpoints. Enable checkpoint in crash test so our CI runs will use it. Didn't enable backup in crash test since it copies all the files which is too slow.
Closes https://github.com/facebook/rocksdb/pull/4005
Differential Revision: D8472275
Pulled By: ajkr
fbshipit-source-id: ff91bdc37caac4ffd97aea8df96b3983313ac1d5
Summary:
Fixed bug where `db_stress` output a line with a warning followed by a line with an error, and `db_crashtest.py` considered that a success. For example:
```
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
open error: Corruption: SST file is ahead of WALs
```
Closes https://github.com/facebook/rocksdb/pull/4006
Differential Revision: D8473463
Pulled By: ajkr
fbshipit-source-id: 60461bdd7491d9d26c63f7d4ee522a0f88ba3de7
Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942
Differential Revision: D8238413
Pulled By: maysamyabandeh
fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035
Summary:
We need to keep the DB directory around since the direct IO check in "db_crashtest.py" relies on it existing. This PR fixes an issue where it was removed after each stress test run during the second half of whitebox crash testing.
Closes https://github.com/facebook/rocksdb/pull/3946
Differential Revision: D8247998
Pulled By: ajkr
fbshipit-source-id: 4e7cffbdab9b40df125e7842d0d59916e76261d3
Summary:
Previously `db_stress` attempted to configure direct I/O dynamically in `SetOptions()` which had multiple problems (ummm must've never been tested):
- It's a DB option so SetDBOptions should've been called instead
- It's not a dynamic option so even SetDBOptions would fail
- It required enabling SyncPoint to mask O_DIRECT since it had no way to detect whether the DB directory was in tmpfs or not. This required locking that consumed ~80% of db_stress CPU.
In this PR I delete the broken dynamic config and instead configure it statically, only enabling it if the DB directory truly supports O_DIRECT.
Closes https://github.com/facebook/rocksdb/pull/3939
Differential Revision: D8238120
Pulled By: ajkr
fbshipit-source-id: 60bb2deebe6c9b54a3f788079261715b4a229279
Summary:
- Any options unknown to `db_crashtest.py` are now passed directly to `db_stress`. This way, we won't need to update `db_crashtest.py` every time `db_stress` gets a new option.
- Remove `db_crashtest.py` redundant arguments where the value is the same as `db_stress`'s default
- Remove `db_crashtest.py` redundant arguments where the value is the same in a previously applied options map. For example, default_params are always applied before whitebox_default_params, so if they require the same value for an argument, that value only needs to be provided in default_params.
- Made the simple option maps applied in addition to the regular option maps. Previously they were exclusive which led to lots of duplication
Closes https://github.com/facebook/rocksdb/pull/3809
Differential Revision: D7885779
Pulled By: ajkr
fbshipit-source-id: 3a3243b55724d6d5bff36e939b582b9b62c538a8
Summary:
- Original commit: a4fb1f8c04
- Revert commit (we reverted as a quick fix to get crash tests passing): 6afe22db2e
This PR includes the contents of the original commit plus two bug fixes, which are:
- In whitebox crash test, only set `--expected_values_path` for `db_stress` runs in the first half of the crash test's duration. In the second half, a fresh DB is created for each `db_stress` run, so we cannot maintain expected state across `db_stress` runs.
- Made `Exists()` return true for `UNKNOWN_SENTINEL` values. I previously had an assert in `Exists()` that value was not `UNKNOWN_SENTINEL`. But it is possible for post-crash-recovery expected values to be `UNKNOWN_SENTINEL` (i.e., if the crash happens in the middle of an update), in which case this assertion would be tripped. The effect of returning true in this case is there may be cases where a `SingleDelete` deletes no data. But if we had returned false, the effect would be calling `SingleDelete` on a key with multiple older versions, which is not supported.
Closes https://github.com/facebook/rocksdb/pull/3793
Differential Revision: D7811671
Pulled By: ajkr
fbshipit-source-id: 67e0295bfb1695ff9674837f2e05bb29c50efc30
Peter Dillinger