155 Commits (8142223b1b32527b00cb3b6e9fb277734bf352d9)

Author	SHA1	Message	Date
Peter Dillinger	2d0380adbe	Allow manifest fix-up without requiring prior state (#10796) ... Summary: This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state. Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796 Test Plan: tests added/updated, that fail before the change(s) and now pass Reviewed By: jay-zhuang Differential Revision: D40232645 Pulled By: jay-zhuang fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be	2 years ago
Jay Zhuang	faa0f9723c	Tiered compaction: integrate Seqno time mapping with per key placement (#10370) ... Summary: Using the Sequence number to time mapping to decide if a key is hot or not in compaction and place it in the corresponding level. Note: the feature is not complete, level compaction will run indefinitely until all penultimate level data is cold and small enough to not trigger compaction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10370 Test Plan: CI * Run basic db_bench for universal compaction manually Reviewed By: siying Differential Revision: D37892338 Pulled By: jay-zhuang fbshipit-source-id: 792bbd91b1ccc2f62b5d14c53118434bcaac4bbe	2 years ago
Zichen Zhu	65893ad959	Explicitly closing all directory file descriptors (#10049) ... Summary: Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run ``` strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing ``` There is one directory file descriptor that is not closed in the strace log. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049 Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent. Reviewed By: ajkr, hx235 Differential Revision: D36722135 Pulled By: littlepig2013 fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff	2 years ago
anand76	57997ddaaf	Multi file concurrency in MultiGet using coroutines and async IO (#9968) ... Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696	3 years ago
Hui Xiao	3573558ec5	Rewrite memory-charging feature's option API (#9926) ... Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af	3 years ago
Peter Dillinger	9d0cae7104	Eliminate unnecessary (slow) block cache Ref()ing in MultiGet (#9899) ... Summary: When MultiGet() determines that multiple query keys can be served by examining the same data block in block cache (one Lookup()), each PinnableSlice referring to data in that data block needs to hold on to the block in cache so that they can be released at arbitrary times by the API user. Historically this is accomplished with extra calls to Ref() on the Handle from Lookup(), with each PinnableSlice cleanup calling Release() on the Handle, but this creates extra contention on the block cache for the extra Ref()s and Release()es, especially because they hit the same cache shard repeatedly. In the case of merge operands (possibly more cases?), the problem was compounded by doing an extra Ref()+eventual Release() for each merge operand for a key reusing a block (which could be the same key!), rather than one Ref() per key. (Note: the non-shared case with `biter` was already one per key.) This change optimizes MultiGet not to rely on these extra, contentious Ref()+Release() calls by instead, in the shared block case, wrapping the cache Release() cleanup in a refcounted object referenced by the PinnableSlices, such that after the last wrapped reference is released, the cache entry is Release()ed. Relaxed atomic refcounts should be much faster than mutex-guarded Ref() and Release(), and much less prone to a performance cliff when MultiGet() does a lot of block sharing. Note that I did not use std::shared_ptr, because that would require an extra indirection object (shared_ptr itself new/delete) in order to associate a ref increment/decrement with a Cleanable cleanup entry. (If I assumed it was the size of two pointers, I could do some hackery to make it work without the extra indirection, but that's too fragile.) Some details: * Fixed (removed) extra block cache tracing entries in cases of cache entry reuse in MultiGet, but it's likely that in some other cases traces are missing (XXX comment inserted) * Moved existing implementations for cleanable.h from iterator.cc to new cleanable.cc * Improved API comments on Cleanable * Added a public SharedCleanablePtr class to cleanable.h in case others could benefit from the same pattern (potentially many Cleanables and/or smart pointers referencing a shared Cleanable) * Add a typedef for MultiGetContext::Mask * Some variable renaming for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899 Test Plan: Added unit tests for SharedCleanablePtr. Greatly enhanced ability of existing tests to detect cache use-after-free. * Release PinnableSlices from MultiGet as they are read rather than in bulk (in db_test_util wrapper). * In ASAN build, default to using a trivially small LRUCache for block_cache so that entries are immediately erased when unreferenced. (Updated two tests that depend on caching.) New ASAN testsuite running time seems OK to me. If I introduce a bug into my implementation where we skip the shared cleanups on block reuse, ASAN detects the bug in `db_basic_test *MultiGet*`. If I remove either of the above testing enhancements, the bug is not detected. Consider for follow-up work: manipulate or randomize ordering of PinnableSlice use and release from MultiGet db_test_util wrapper. But in typical cases, natural ordering gives pretty good functional coverage. Performance test: In the extreme (but possible) case of MultiGetting the same or adjacent keys in a batch, throughput can improve by an order of magnitude. `./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200` Before ops/sec, num=5: 1,384,394 Before ops/sec, num=500: 6,423,720 After ops/sec, num=500: 10,658,794 After ops/sec, num=5: 16,027,257 Also note that previously, with high parallelism, having query keys concentrated in a single block was worse than spreading them out a bit. Now concentrated in a single block is faster than spread out, which is hopefully consistent with natural expectation. Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12): Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec Possibly better, possibly in the noise. Reviewed By: anand1976 Differential Revision: D35907003 Pulled By: pdillinger fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e	3 years ago
gitbw95	8102690a52	Update Cache::Release param from force_erase to erase_if_last_ref (#9728) ... Summary: The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728 Reviewed By: pdillinger Differential Revision: D35038673 Pulled By: gitbw95 fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f	3 years ago
Peter Dillinger	cff0d1e8e6	New backup meta schema, with file temperatures (#9660) ... Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a	3 years ago
Peter Dillinger	ce60d0cbe5	Test refactoring for Backups+Temperatures (#9655) ... Summary: In preparation for more support for file Temperatures in BackupEngine, this change does some test refactoring: * Move DBTest2::BackupFileTemperature test to BackupEngineTest::FileTemperatures, with some updates to make it work in the new home. This test will soon be expanded for deeper backup work. * Move FileTemperatureTestFS from db_test2.cc to db_test_util.h, to support sharing because of above moved test, but split off the "no link" part to the test needing it. * Use custom FileSystems in backupable_db_test rather than custom Envs, because going through Env file interfaces doesn't support temperatures. * Fix RemapFileSystem to map DirFsyncOptions::renamed_new_name parameter to FsyncWithDirOptions, which was required because this limitation caused a crash only after moving to higher fidelity of FileSystem interface (vs. LegacyDirectoryWrapper throwing away some parameter details) * `backupable_options_` -> `engine_options_` as part of the ongoing work to get rid of the obsolete "backupable" naming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9655 Test Plan: test code updates only Reviewed By: jay-zhuang Differential Revision: D34622183 Pulled By: pdillinger fbshipit-source-id: f24b7a596a89b9e089e960f4e5d772575513e93f	3 years ago
Yanqin Jin	d10c5c08d3	Remove iter_start_seqnum and preserve_deletes (#9430) ... Summary: According to https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl.cc#L2896:L2911 and https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl_open.cc#L203:L208, we are going to remove `iter_start_seqnum` and `preserve_deletes` starting from RocksDB 7.0 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9430 Test Plan: make check and CI Reviewed By: ajkr Differential Revision: D33753639 Pulled By: riversand963 fbshipit-source-id: c80aab8e8d8fc33e52472fed524ed703d0ffc8b6	3 years ago
mrambacher	fe31dc53ca	Make the Env class Customizable (#9293) ... Summary: Allows the Env to have options (Configurable) and loads like other Customizable classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293 Reviewed By: pdillinger, zhichao-cao Differential Revision: D33181591 Pulled By: mrambacher fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7	3 years ago
Peter Dillinger	653c392e47	More refactoring ahead of footer & meta changes (#9240) ... Summary: I'm working on a new format_version=6 to support context checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test updates to support that change. Test coverage data and manual inspection agree on dead code in block_based_table_reader.cc (removed). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240 Test Plan: tests enhanced to cover more cases etc. Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible. TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true} (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Before w/ wal: 454512 After w/ wal: 444820 (-2.1%) Before w/o wal: 1004560 After w/o wal: 998897 (-0.6%) Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case. This regression will be corrected in a follow-up PR. Reviewed By: ajkr Differential Revision: D32813769 Pulled By: pdillinger fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f	3 years ago
Peter Dillinger	a7d4bea43a	Implement XXH3 block checksum type (#9069) ... Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1	3 years ago
Peter Dillinger	ad5325a736	Experimental support for SST unique IDs (#8990) ... Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243	3 years ago
mrambacher	13ae16c315	Cleanup includes in dbformat.h (#8930) ... Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d	3 years ago
mrambacher	beed86473a	Make MemTableRepFactory into a Customizable class (#8419) ... Summary: This PR does the following: -> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString -> Makes the existing implementations compatible with configurations -> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419 Reviewed By: zhichao-cao Differential Revision: D29558961 Pulled By: mrambacher fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c	3 years ago
Adam Retter	5de333fd99	Add db_test2 to to ASSERT_STATUS_CHECKED (#8640) ... Summary: This is the `db_test2` parts of https://github.com/facebook/rocksdb/pull/7737 reworked on the latest HEAD. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8640 Reviewed By: akankshamahajan15 Differential Revision: D30303684 Pulled By: mrambacher fbshipit-source-id: 263e2f82d849bde4048b60aed8b31e7deed4706a	3 years ago
Andrew Kryczka	a685a701ca	Do not attempt to rename non-existent info log (#8622) ... Summary: Previously we attempted to rename "LOG" to "LOG.old.*" without checking its existence first. "LOG" had no reason to exist in a new DB. Errors in renaming a non-existent "LOG" were swallowed via `PermitUncheckedError()` so things worked. However the storage service's error monitoring was detecting all these benign rename failures. So it is better to fix it. Also with this PR we can now distinguish rename failure for other reasons and return them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8622 Test Plan: new unit test Reviewed By: akankshamahajan15 Differential Revision: D30115189 Pulled By: ajkr fbshipit-source-id: e2f337ffb2bd171be0203172abc8e16e7809b170	3 years ago
mrambacher	3aee4fbd41	Make EventListener into a Customizable Class (#8473) ... Summary: - Added Type/CreateFromString - Added ability to load EventListeners to DBOptions - Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473 Reviewed By: zhichao-cao Differential Revision: D29901488 Pulled By: mrambacher fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254	3 years ago
Akanksha Mahajan	5ba1b6e549	Cache warming data blocks during flush (#8242) ... Summary: This PR prepopulates warm/hot data blocks which are already in memory into block cache at the time of flush. On a flush, the data block that is in memory (in memtables) get flushed to the device. If using Direct IO, additional IO is incurred to read this data back into memory again, which is avoided by enabling newly added option. Right now, this is enabled only for flush for data blocks. We plan to expand this option to cover compactions in the future and for other types of blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242 Test Plan: Add new unit test Reviewed By: anand1976 Differential Revision: D28521703 Pulled By: akankshamahajan15 fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05	3 years ago
Peter Dillinger	311a544c2a	Use deleters to label cache entries and collect stats (#8297) ... Summary: This change gathers and publishes statistics about the kinds of items in block cache. This is especially important for profiling relative usage of cache by index vs. filter vs. data blocks. It works by iterating over the cache during periodic stats dump (InternalStats, stats_dump_period_sec) or on demand when DB::Get(Map)Property(kBlockCacheEntryStats), except that for efficiency and sharing among column families, saved data from the last scan is used when the data is not considered too old. The new information can be seen in info LOG, for example: Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0 Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%) And also through DB::GetProperty and GetMapProperty (here using ldb just for demonstration): $ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats rocksdb.block-cache-entry-stats.bytes.data-block: 0 rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0 rocksdb.block-cache-entry-stats.bytes.index-block: 178992 rocksdb.block-cache-entry-stats.bytes.misc: 0 rocksdb.block-cache-entry-stats.bytes.other-block: 0 rocksdb.block-cache-entry-stats.bytes.write-buffer: 0 rocksdb.block-cache-entry-stats.capacity: 8388608 rocksdb.block-cache-entry-stats.count.data-block: 0 rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-meta-block: 0 rocksdb.block-cache-entry-stats.count.index-block: 215 rocksdb.block-cache-entry-stats.count.misc: 1 rocksdb.block-cache-entry-stats.count.other-block: 0 rocksdb.block-cache-entry-stats.count.write-buffer: 0 rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290 rocksdb.block-cache-entry-stats.percent.data-block: 0.000000 rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000 rocksdb.block-cache-entry-stats.percent.index-block: 2.133751 rocksdb.block-cache-entry-stats.percent.misc: 0.000000 rocksdb.block-cache-entry-stats.percent.other-block: 0.000000 rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000 rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052 rocksdb.block-cache-entry-stats.secs_since_last_collection: 0 Solution detail - We need some way to flag what kind of blocks each entry belongs to, preferably without changing the Cache API. One of the complications is that Cache is a general interface that could have other users that don't adhere to whichever convention we decide on for keys and values. Or we would pay for an extra field in the Handle that would only be used for this purpose. This change uses a back-door approach, the deleter, to indicate the "role" of a Cache entry (in addition to the value type, implicitly). This has the added benefit of ensuring proper code origin whenever we recognize a particular role for a cache entry; if the entry came from some other part of the code, it will use an unrecognized deleter, which we simply attribute to the "Misc" role. An internal API makes for simple instantiation and automatic registration of Cache deleters for a given value type and "role". Another internal API, CacheEntryStatsCollector, solves the problem of caching the results of a scan and sharing them, to ensure scans are neither excessive nor redundant so as not to harm Cache performance. Because code is added to BlocklikeTraits, it is pulled out of block_based_table_reader.cc into its own file. This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option (could still be added), and with actual stat gathering. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297 Test Plan: manual testing with db_bench, and a couple of basic unit tests Reviewed By: ltamasi Differential Revision: D28488721 Pulled By: pdillinger fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb	4 years ago
anand76	feb06e83b2	Initial support for secondary cache in LRUCache (#8271) ... Summary: Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache. Tests: Results from cache_bench and db_bench don't show any regression due to these changes. cache_bench results before and after this change - Command ```./cache_bench -ops_per_thread=10000000 -threads=1``` Before ```Complete in 40.688 s; QPS = 245774``` ```Complete in 40.486 s; QPS = 246996``` ```Complete in 42.019 s; QPS = 237989``` After ```Complete in 40.672 s; QPS = 245869``` ```Complete in 44.622 s; QPS = 224107``` ```Complete in 42.445 s; QPS = 235599``` db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 - Commands ```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true``` ```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300``` Before ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found) ``` After ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271 Reviewed By: zhichao-cao Differential Revision: D28357511 Pulled By: anand1976 fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2	4 years ago
Peter Dillinger	78a309bf86	New Cache API for gathering statistics (#8225) ... Summary: Adds a new Cache::ApplyToAllEntries API that we expect to use (in follow-up PRs) for efficiently gathering block cache statistics. Notable features vs. old ApplyToAllCacheEntries: * Includes key and deleter (in addition to value and charge). We could have passed in a Handle but then more virtual function calls would be needed to get the "fields" of each entry. We expect to use the 'deleter' to identify the origin of entries, perhaps even more. * Heavily tuned to minimize latency impact on operating cache. It does this by iterating over small sections of each cache shard while cycling through the shards. * Supports tuning roughly how many entries to operate on for each lock acquire and release, to control the impact on the latency of other operations without excessive lock acquire & release. The right balance can depend on the cost of the callback. Good default seems to be around 256. * There should be no need to disable thread safety. (I would expect uncontended locks to be sufficiently fast.) I have enhanced cache_bench to validate this approach: * Reports a histogram of ns per operation, so we can look at the ditribution of times, not just throughput (average). * Can add a thread for simulated "gather stats" which calls ApplyToAllEntries at a specified interval. We also generate a histogram of time to run ApplyToAllEntries. To make the iteration over some entries of each shard work as cleanly as possible, even with resize between next set of entries, I have re-arranged which hash bits are used for sharding and which for indexing within a shard. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225 Test Plan: A couple of unit tests are added, but primary validation is manual, as the primary risk is to performance. The primary validation is using cache_bench to ensure that neither the minor hashing changes nor the simulated stats gathering significantly impact QPS or latency distribution. Note that adding op latency histogram seriously impacts the benchmark QPS, so for a fair baseline, we need the cache_bench changes (except remove simulated stat gathering to make it compile). In short, we don't see any reproducible difference in ops/sec or op latency unless we are gathering stats nearly continuously. Test uses 10GB block cache with 8KB values to be somewhat realistic in the number of items to iterate over. Baseline typical output: ``` Complete in 92.017 s; Rough parallel ops/sec = 869401 Thread ops/sec = 54662 Operation latency (ns): Count: 80000000 Average: 11223.9494 StdDev: 29.61 Min: 0 Median: 7759.3973 Max: 9620500 Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58 ------------------------------------------------------ [ 0, 1 ] 68 0.000% 0.000% ( 2900, 4400 ] 89 0.000% 0.000% ( 4400, 6600 ] 33630240 42.038% 42.038% ######## ( 6600, 9900 ] 18129842 22.662% 64.700% ##### ( 9900, 14000 ] 7877533 9.847% 74.547% ## ( 14000, 22000 ] 15193238 18.992% 93.539% #### ( 22000, 33000 ] 3037061 3.796% 97.335% # ( 33000, 50000 ] 1626316 2.033% 99.368% ( 50000, 75000 ] 421532 0.527% 99.895% ( 75000, 110000 ] 56910 0.071% 99.966% ( 110000, 170000 ] 16134 0.020% 99.986% ( 170000, 250000 ] 5166 0.006% 99.993% ( 250000, 380000 ] 3017 0.004% 99.996% ( 380000, 570000 ] 1337 0.002% 99.998% ( 570000, 860000 ] 805 0.001% 99.999% ( 860000, 1200000 ] 319 0.000% 100.000% ( 1200000, 1900000 ] 231 0.000% 100.000% ( 1900000, 2900000 ] 100 0.000% 100.000% ( 2900000, 4300000 ] 39 0.000% 100.000% ( 4300000, 6500000 ] 16 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ``` New, gather_stats=false. Median thread ops/sec of 5 runs: ``` Complete in 92.030 s; Rough parallel ops/sec = 869285 Thread ops/sec = 54458 Operation latency (ns): Count: 80000000 Average: 11298.1027 StdDev: 42.18 Min: 0 Median: 7722.0822 Max: 6398720 Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78 ------------------------------------------------------ [ 0, 1 ] 109 0.000% 0.000% ( 2900, 4400 ] 793 0.001% 0.001% ( 4400, 6600 ] 34054563 42.568% 42.569% ######### ( 6600, 9900 ] 17482646 21.853% 64.423% #### ( 9900, 14000 ] 7908180 9.885% 74.308% ## ( 14000, 22000 ] 15032072 18.790% 93.098% #### ( 22000, 33000 ] 3237834 4.047% 97.145% # ( 33000, 50000 ] 1736882 2.171% 99.316% ( 50000, 75000 ] 446851 0.559% 99.875% ( 75000, 110000 ] 68251 0.085% 99.960% ( 110000, 170000 ] 18592 0.023% 99.983% ( 170000, 250000 ] 7200 0.009% 99.992% ( 250000, 380000 ] 3334 0.004% 99.997% ( 380000, 570000 ] 1393 0.002% 99.998% ( 570000, 860000 ] 700 0.001% 99.999% ( 860000, 1200000 ] 293 0.000% 100.000% ( 1200000, 1900000 ] 196 0.000% 100.000% ( 1900000, 2900000 ] 69 0.000% 100.000% ( 2900000, 4300000 ] 32 0.000% 100.000% ( 4300000, 6500000 ] 10 0.000% 100.000% ``` New, gather_stats=true, 1 second delay between scans. Scans take about 1 second here so it's spending about 50% time scanning. Still the effect on ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs: ``` Complete in 91.890 s; Rough parallel ops/sec = 870608 Thread ops/sec = 54551 Operation latency (ns): Count: 80000000 Average: 11311.2629 StdDev: 45.28 Min: 0 Median: 7686.5458 Max: 10018340 Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86 ------------------------------------------------------ [ 0, 1 ] 71 0.000% 0.000% ( 2900, 4400 ] 291 0.000% 0.000% ( 4400, 6600 ] 34492060 43.115% 43.116% ######### ( 6600, 9900 ] 16727328 20.909% 64.025% #### ( 9900, 14000 ] 7845828 9.807% 73.832% ## ( 14000, 22000 ] 15510654 19.388% 93.220% #### ( 22000, 33000 ] 3216533 4.021% 97.241% # ( 33000, 50000 ] 1680859 2.101% 99.342% ( 50000, 75000 ] 439059 0.549% 99.891% ( 75000, 110000 ] 60540 0.076% 99.967% ( 110000, 170000 ] 14649 0.018% 99.985% ( 170000, 250000 ] 5242 0.007% 99.991% ( 250000, 380000 ] 3260 0.004% 99.995% ( 380000, 570000 ] 1599 0.002% 99.997% ( 570000, 860000 ] 1043 0.001% 99.999% ( 860000, 1200000 ] 471 0.001% 99.999% ( 1200000, 1900000 ] 275 0.000% 100.000% ( 1900000, 2900000 ] 143 0.000% 100.000% ( 2900000, 4300000 ] 60 0.000% 100.000% ( 4300000, 6500000 ] 27 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ( 9800000, 14000000 ] 1 0.000% 100.000% Gather stats latency (us): Count: 46 Average: 980387.5870 StdDev: 60911.18 Min: 879155 Median: 1033777.7778 Max: 1261431 Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00 ------------------------------------------------------ ( 860000, 1200000 ] 45 97.826% 97.826% #################### ( 1200000, 1900000 ] 1 2.174% 100.000% Most recent cache entry stats: Number of entries: 1295133 Total charge: 9.88 GB Average key size: 23.4982 Average charge: 8.00 KB Unique deleters: 3 ``` Reviewed By: mrambacher Differential Revision: D28295742 Pulled By: pdillinger fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95	4 years ago
Zhichao Cao	09a9ec3ac0	Fix the false positive alert of CF consistency check in WAL recovery (#8207) ... Summary: In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue. Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here. Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207 Test Plan: added unit test, make crash_test Reviewed By: riversand963 Differential Revision: D27898839 Pulled By: zhichao-cao fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e	4 years ago
Jay Zhuang	a89740fbc6	Fix unittest no space issue (#8204) ... Summary: Unittest reports no space from time to time, which can be reproduced on a small memory machine with SHM. It's caused by large WAL files generated during the test, which is preallocated, but didn't truncate during close(). Adding the missing APIs to set preallocation. It added arm test as nightly build, as the test runs more than 1 hour. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8204 Test Plan: test on small memory arm machine Reviewed By: mrambacher Differential Revision: D27873145 Pulled By: jay-zhuang fbshipit-source-id: f797c429d6bc13cbcc673bc03fcc72adda55f506	4 years ago
Yanqin Jin	a376c22066	Handle rename() failure in non-local FS (#8192) ... Summary: In a distributed environment, a file `rename()` operation can succeed on server (remote) side, but the client can somehow return non-ok status to RocksDB. Possible reasons include network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a new MANIFEST. We currently always delete the new MANIFEST if an error occurs. This is problematic in distributed world. If the server-side successfully updates the CURRENT file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail. As a fix, we can track the execution result of IO operations on the new MANIFEST. - If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original MANIFEST. Therefore, it is safe to remove the new MANIFEST. - If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the new MANIFEST.) Therefore, we keep the new MANIFEST. - Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT. - If process reopens the db immediately after the failure, then the CURRENT file can point to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can succeed and ignore the other. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D27804648 Pulled By: riversand963 fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4	4 years ago
Giuseppe Ottaviano	48cd7a3aae	Fix flush reason attribution (#8150) ... Summary: Current flush reason attribution is misleading or incorrect (depending on what the original intention was): - Flush due to WAL reaching its maximum size is attributed to `kWriteBufferManager` - Flushes due to full write buffer and write buffer manager are not distinguishable, both are attributed to `kWriteBufferFull` This changes the first to a new flush reason `kWALFull`, and splits the second between `kWriteBufferManager` and `kWriteBufferFull`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8150 Reviewed By: zhichao-cao Differential Revision: D27569645 Pulled By: ot fbshipit-source-id: 7e3c8ca186a6e71976e6b8e937297eebd4b769cc	4 years ago
Zhichao Cao	dd0447ae2c	Add new Append API with DataVerificationInfo to Env WritableFile (#8071) ... Summary: Add the new Append and PositionedAppend API to env WritableFile. User is able to benefit from the write checksum handoff API when using the legacy Env classes. FileSystem already implemented the checksum handoff API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8071 Test Plan: make check, added new unit test. Reviewed By: anand1976 Differential Revision: D27177043 Pulled By: zhichao-cao fbshipit-source-id: 430c8331fc81099fa6d00f4fff703b68b9e8080e	4 years ago
Akanksha Mahajan	27d57a035e	Use SST file manager to track blob files as well (#8037) ... Summary: Extend support to track blob files in SST File manager. This PR notifies SstFileManager whenever a new blob file is created, via OnAddFile and an obsolete blob file deleted via OnDeleteFile and delete file via ScheduleFileDeletion. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037 Test Plan: Add new unit tests Reviewed By: ltamasi Differential Revision: D26891237 Pulled By: akankshamahajan15 fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6	4 years ago
mrambacher	12f1137355	Add a SystemClock class to capture the time functions of an Env (#7858) ... Summary: Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock. Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock. There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc). Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858 Reviewed By: pdillinger Differential Revision: D26006406 Pulled By: mrambacher fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90	4 years ago
Adam Retter	6e0f62f2b6	Add more tests to ASSERT_STATUS_CHECKED (3), API change (#7715) ... Summary: Third batch of adding more tests to ASSERT_STATUS_CHECKED. * db_compaction_filter_test * db_compaction_test * db_dynamic_level_test * db_inplace_update_test * db_sst_test * db_tailing_iter_test * db_io_failure_test Also update GetApproximateSizes APIs to all return Status. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7715 Reviewed By: jay-zhuang Differential Revision: D25806896 Pulled By: pdillinger fbshipit-source-id: 6cb9d62ba5a756c645812754c596ad3995d7c262	4 years ago
mrambacher	f35f7f2704	Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) ... Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f	4 years ago
Andrew Kryczka	8115eb520d	add Status check assertions for repair_test (#7455) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7455 Reviewed By: riversand963 Differential Revision: D23985283 Pulled By: ajkr fbshipit-source-id: 5dd2be62350f6e31d13a1e7821cb848a37699c93	4 years ago
mrambacher	7d472accdc	Bring the Configurable options together (#5753) ... Summary: This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753 Reviewed By: ajkr Differential Revision: D23385030 Pulled By: zhichao-cao fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a	4 years ago
sdong	722814e357	Get() to fail with underlying failures in PartitionIndexReader::CacheDependencies() (#7297) ... Summary: Right now all I/O failures under PartitionIndexReader::CacheDependencies() is swallowed. This doesn't impact correctness but we've made a decision that any I/O error in read path now should be returned to users for awareness. Return errors in those cases instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7297 Test Plan: Add a new unit test that ingest errors in this code path and see Get() fails. Only one I/O path is hit in PartitionIndexReader::CacheDependencies(). Several option changes are attempt but not able to got other pread paths triggered. Not sure whether other failure cases would be even possible. Would rely on continuous stress test to validate it. Reviewed By: anand1976 Differential Revision: D23257950 fbshipit-source-id: 859dbc92fa239996e1bb378329344d3d54168c03	4 years ago
Jay Zhuang	3e422ce0ca	Fix a timer_test deadlock (#7277) ... Summary: There's a potential deadlock caused by MockTimeEnv time value get to a large number, which causes TimedWait() wait forever. The test misuses the microseconds as seconds, making it more likely to happen. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7277 Reviewed By: pdillinger Differential Revision: D23183873 Pulled By: jay-zhuang fbshipit-source-id: 6fc38ebd40b4125a99551204b271f91a27e70086	4 years ago
sdong	b194c21bba	Whole DBTest to skip fsync (#7274) ... Summary: After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative. This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic infrastructure mis-merge. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274 Test Plan: Run all existing files. Reviewed By: pdillinger Differential Revision: D23177444 fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33	4 years ago
Jay Zhuang	69760b4d05	Introduce a global StatsDumpScheduler for stats dumping (#7223) ... Summary: Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223 Reviewed By: riversand963 Differential Revision: D23056737 Pulled By: jay-zhuang fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba	4 years ago
Peter Dillinger	6ac1d25fd0	Fix+clean up handling of mock sleeps (#7101) ... Summary: We have a number of tests hanging on MacOS and windows due to mishandling of code for mock sleeps. In addition, the code was in terrible shape because the same variable (addon_time_) would sometimes refer to microseconds and sometimes to seconds. One test even assumed it was nanoseconds but was written to pass anyway. This has been cleaned up so that DB tests generally use a SpecialEnv function to mock sleep, for either some number of microseconds or seconds depending on the function called. But to call one of these, the test must first call SetMockSleep (precondition enforced with assertion), which also turns sleeps in RocksDB into mock sleeps. To also removes accounting for actual clock time, call SetTimeElapseOnlySleepOnReopen, which implies SetMockSleep (on DB re-open). This latter setting only works by applying on DB re-open, otherwise havoc can ensue if Env goes back in time with DB open. More specifics: Removed some unused test classes, and updated comments on the general problem. Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead of mock time. For this we have the only modification to production code, inserting a sync point callback in flush_job.cc, which is not a change to production behavior. Removed unnecessary resetting of mock times to 0 in many tests. RocksDB deals in relative time. Any behaviors relying on absolute date/time are likely a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one clearly injecting a specific absolute time for actual testing convenience.) Just in case I misunderstood some test, I put this note in each replacement: // NOTE: Presumed unnecessary and removed: resetting mock time in env Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and FilterCompactionTimeTest in db_test.cc stats_history_test and blob_db_test are each their own beast, rather deeply dependent on MockTimeEnv. Each gets its own variant of a work-around for TimedWait in a mock time environment. (Reduces redundancy and inconsistency in stats_history_test.) Intended follow-up: Remove TimedWait from the public API of InstrumentedCondVar, and only make that accessible through Env by passing in an InstrumentedCondVar and a deadline. Then the Env implementations mocking time can fix this problem without using sync points. (Test infrastructure using sync points interferes with individual tests' control over sync points.) With that change, we can simplify/consolidate the scattered work-arounds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101 Test Plan: make check on Linux and MacOS Reviewed By: zhichao-cao Differential Revision: D23032815 Pulled By: pdillinger fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b	4 years ago
mrambacher	c7c7b07f06	More Makefile Cleanup (#7097) ... Summary: Cleans up some of the dependencies on test code in the Makefile while building tools: - Moves the test::RandomString, DBBaseTest::RandomString into Random - Moves the test::RandomHumanReadableString into Random - Moves the DestroyDir method into file_utils - Moves the SetupSyncPointsToMockDirectIO into sync_point. - Moves the FaultInjection Env and FS classes under env These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated. Tested both release and debug builds via Make and CMake for both static and shared libraries. More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097 Reviewed By: riversand963 Differential Revision: D22463160 Pulled By: pdillinger fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2	4 years ago
Jay Zhuang	00de699096	Replace reinterpret_cast with static_cast_with_check (#7067) ... Summary: Replace `reinterpret_cast` with `static_cast_with_check` for `DBImpl` and `ColumnFamilyHandleImpl`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7067 Reviewed By: siying Differential Revision: D22361587 Pulled By: jay-zhuang fbshipit-source-id: dfe9e8f3af39c3d27cc372c55ab9ad905eb0a5a1	4 years ago
Peter Dillinger	52d59e0c93	Revert "Whole DBTest to skip fsync (#7049)" (#7070) ... Summary: This reverts commit 4f1534bdb0. This commit caused failures and deadlocks in MultiThreadedDBTest.MultiThreaded/69 and others. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7070 Reviewed By: riversand963 Differential Revision: D22358778 Pulled By: pdillinger fbshipit-source-id: faf8f2cb469a7063a113921c8e9c64a9f7610dac	4 years ago
sdong	4f1534bdb0	Whole DBTest to skip fsync (#7049) ... Summary: After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049 Test Plan: Run all existing files. Reviewed By: pdillinger Differential Revision: D22301700 fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565	4 years ago
sdong	58547e533b	Disable fsync in some tests to speed them up (#7036) ... Summary: Fsyncing files is not providing more test coverage in many tests. Provide an option in SpecialEnv to turn it off to speed it up and enable this option in some tests with relatively long run time. Most of those tests can be divided as parameterized gtest too. This two speed up approaches are orthogonal and we can do both if needed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7036 Test Plan: Run all tests and make sure they pass. Reviewed By: ltamasi Differential Revision: D22268084 fbshipit-source-id: 6d4a838a1b7328c13931a2a5d93de57aa02afaab	4 years ago
Peter Dillinger	2f1700c8c5	Fix failure to write output in SpecialEnv::GetCurrentTime (#6803) ... Summary: This very old test code bug was causing a new valgrind failure in MultiGetDeadlineExceeded Also fix hang in MultiGetDeadlineExceeded by unifying with some logic from another test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6803 Test Plan: run that unit test under valgrind, make check Reviewed By: siying Differential Revision: D21388470 Pulled By: pdillinger fbshipit-source-id: 0ce99d6d5eb8cd3195b17406892c8c5cff5fa5dd	5 years ago
Peter Dillinger	249eff0f30	Stats for redundant insertions into block cache (#6681) ... Summary: Since read threads do not coordinate on loading data into block cache, two threads between Lookup and Insert can end up loading and inserting the same data. This is particularly concerning with cache_index_and_filter_blocks since those are hot and more likely to be race targets if ejected from (or not pre-populated in) the cache. Particularly with moves toward disaggregated / network storage, the cost of redundant retrieval might be high, and we should at least have some hard statistics from which we can estimate impact. Example with full filter thrashing "cliff": $ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10 ... $ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort rocksdb.block.cache.add COUNT : 14181 rocksdb.block.cache.add.failures COUNT : 0 rocksdb.block.cache.add.redundant COUNT : 476 rocksdb.block.cache.data.add COUNT : 12749 rocksdb.block.cache.data.add.redundant COUNT : 18 rocksdb.block.cache.filter.add COUNT : 1003 rocksdb.block.cache.filter.add.redundant COUNT : 217 rocksdb.block.cache.index.add COUNT : 429 rocksdb.block.cache.index.add.redundant COUNT : 241 $ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort rocksdb.block.cache.add COUNT : 1182223 rocksdb.block.cache.add.failures COUNT : 0 rocksdb.block.cache.add.redundant COUNT : 302728 rocksdb.block.cache.data.add COUNT : 31425 rocksdb.block.cache.data.add.redundant COUNT : 12 rocksdb.block.cache.filter.add COUNT : 795455 rocksdb.block.cache.filter.add.redundant COUNT : 130238 rocksdb.block.cache.index.add COUNT : 355343 rocksdb.block.cache.index.add.redundant COUNT : 172478 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681 Test Plan: Some manual testing (above) and unit test covering key metrics is included Reviewed By: ltamasi Differential Revision: D21134113 Pulled By: pdillinger fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87	5 years ago
sdong	fdf882ded2	Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433) ... Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e	5 years ago
Connor1996	3e26a94ba1	Add oldest snapshot sequence property (#6228) ... Summary: Add oldest snapshot sequence property, so we can use `db.GetProperty("rocksdb.oldest-snapshot-sequence")` to get the sequence number of the oldest snapshot. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6228 Differential Revision: D19264145 Pulled By: maysamyabandeh fbshipit-source-id: 67fbe5304d89cbc475bd404e30d1299f7b11c010	5 years ago
Peter Dillinger	ca3b6c28c9	Expose and elaborate FilterBuildingContext (#6088) ... Summary: This change enables custom implementations of FilterPolicy to wrap a variety of NewBloomFilterPolicy and select among them based on contextual information such as table level and compaction style. * Moves FilterBuildingContext to public API and elaborates it with more useful data. (It would be nice to put more general options-like data, but at the time this object is constructed, we are using internal APIs ImmutableCFOptions and MutableCFOptions and don't have easy access to ColumnFamilyOptions that I can tell.) * Renames BloomFilterPolicy::GetFilterBitsBuilderInternal to GetBuilderWithContext, because it's now public. * Plumbs through the table's "level_at_creation" for filter building context. * Simplified some tests by adding GetBuilder() to MockBlockBasedTableTester. * Adds test as DBBloomFilterTest.ContextCustomFilterPolicy, including sample wrapper class LevelAndStyleCustomFilterPolicy. * Fixes a cross-test bug in DBBloomFilterTest.OptimizeFiltersForHits where it does not reset perf context. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6088 Test Plan: make check, valgrind on db_bloom_filter_test Differential Revision: D18697817 Pulled By: pdillinger fbshipit-source-id: 5f987a2d7b07cc7a33670bc08ca6b4ca698c1cf4	5 years ago
anand76	6c7b1a0cc7	Batched MultiGet API for multiple column families (#5816) ... Summary: Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice. As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816 Test Plan: make check make asan_check asan_crash_test Differential Revision: D18408676 Pulled By: anand1976 fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d	5 years ago