Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.
Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.
Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726
Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.
$ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
...
Total size (MB): 511.992
Bits/key stored: 16.777
...
$ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
...
Total size (MB): 4096
Bits/key stored: 17.1799
...
$
Reviewed By: jay-zhuang
Differential Revision: D25239800
Pulled By: pdillinger
fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
Instead of using `EncodeFixed32` which always serialize a integer to
little endian, we should use the local machine's endianness when
populating a native data structure during options parsing.
Without this fix, `read_amp_bytes_per_bit` may be populated incorrectly
on big-endian machines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7680
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24999166
Pulled By: riversand963
fbshipit-source-id: dc603cff6e17f8fa32479ce6df93b93082e6b0c4
Summary:
A temporary hack to work around a bug in 6.10, 6.11, 6.12, 6.13 and
6.14. The bug will write out 8 bytes to OPTIONS file from the starting
address of BlockBasedTableOptions.read_amp_bytes_per_bit which is
actually a uint32. Consequently, the value of read_amp_bytes_per_bit
written in the OPTIONS file is wrong. From 6.15, RocksDB will
try to parse the read_amp_bytes_per_bit from OPTIONS file as a uint32.
To be able to load OPTIONS file generated by affected releases before
the fix, we need to manually parse read_amp_bytes_per_bit with this hack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7659
Test Plan:
Generate a db with current 6.14.fb (head at b6db05dbb5). Maybe use db_stress.
Checkout this PR, run
```
~/rocksdb/ldb --db=. --try_load_options --ignore_unknown_options idump --count_only
```
Expect success, and should not see
```
Failed: Invalid argument: Error parsing read_amp_bytes_per_bit:17179869184
```
Also
make check
Reviewed By: anand1976
Differential Revision: D24954752
Pulled By: riversand963
fbshipit-source-id: c7b802fc3e52acd050a4fc1cd475016122234394
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)
Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.
### Benchmarking
```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 18.7508
Random filter net ns/op: 258.246
Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 58.4523
Random filter net ns/op: 363.717
Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```
168.166 / 238.488 = 0.705 -> 29.5% space reduction
130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)
### Working around a hashing "flaw"
bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate. The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant. Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))
As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)
TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.
### Other related changes
* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658
Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.
Reviewed By: jay-zhuang
Differential Revision: D24899349
Pulled By: pdillinger
fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
Summary:
The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID. Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and a method to instantiate them (TableFactory::CreateFromString). Customizable objects can be registered with the ObjectRegistry and created dynamically.
Future PRs will make more types of objects extend Customizable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590
Reviewed By: cheng-chang
Differential Revision: D24841553
Pulled By: zhichao-cao
fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155
Summary:
The filter query key should not contain timestamp. The timestamp is
stripped for Get(), but not MultiGet().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7589
Reviewed By: riversand963
Differential Revision: D24494661
Pulled By: jay-zhuang
fbshipit-source-id: fc5ff40f9d683a89a760c6ff0ab3aed05a70c317
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
This commit makes https://github.com/facebook/rocksdb/issues/6262's code change tidier and easier to understand by:
1. Wrapping parallel compression initialization and termination into
common methods;
2. Wrapping BlockRep initialization, push/pop into common methods;
3. Wrapping file size estimation into common methods;
4. Fixing function declarations that use non-const reference;
5. Fixing some uninitialized variables;
6. Fixing first_block data race;
7. Making BlockRep::status check in BlockBasedTableBuilder::Finish only present
if ok();
8. Making assert(ok()) in BlockBasedTableBuilder::CompressAndVerifyBlock only
present in non-parallel compression mode. In parallel compression mode,
compression will abort if status is not OK;
9. Eliminating potential data race caused by BlockBasedTableBuilder::GetStatus()
and BlockBasedTableBuilder::GetIOStatus() by returning status copy instead of
unprotected reference.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6888
Reviewed By: ajkr
Differential Revision: D21957110
Pulled By: jay-zhuang
fbshipit-source-id: 3a29892f249209513f030349756cecd7736eae80
Summary:
Further refinement of the earlier PR. Now the Status is NotFound with a subcode of PathNotFound. Also the existing functions for options parsing/loading are reverted to return InvalidArgument no matter in which way the user-provided arguments are deemed invalid.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7563
Reviewed By: zhichao-cao
Differential Revision: D24422491
Pulled By: ajkr
fbshipit-source-id: ba6b237cd0584d3f925c5ba0d349aeb8c250af67
Summary:
Ignore read error in 'FilePrefetchBuffer::TryReadFromCache' as status is ignored
and bool value is returned. Return error if prefetch fails in
'PrefetchTail' as we have planned to return Prefetch failures to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7574
Test Plan:
make check -j64,
python -u tools/db_crashtest.py blackbox
Reviewed By: zhichao-cao
Differential Revision: D24408825
Pulled By: akankshamahajan15
fbshipit-source-id: feebda771415998253fbe54632f13e6e75b7a243
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
Right now all I/O failures under
PartitionFilterBlock::CacheDependencies() is swallowed. Return error in
case prefetch fails.
On returning error in PartitionedFilterBlockReader::CacheDependencies was causing stress test failure because PrefetchBuffer is initialized with enable_ = true, as result when PosixMmapReadableFile::Read is called from Prefetch, scratch is ignored causing buffer to fill with garbage values. Initializing prefetch buffer by CreatePrefetchBuffer that sets enable_ with !ioptions.allow_mmap_reads fixed the problem as it returns without prefetching data if allow_mmap_reads is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7543
Test Plan:
make check -j64;
python -u tools/db_crashtest.py --simple blackbox
Reviewed By: anand1976
Differential Revision: D24284596
Pulled By: akankshamahajan15
fbshipit-source-id: f3f0fd44b59dcf60645730436f28564a07884868
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
We just used a hacky way to fix db_basic_test: suppress status code in ~BlockBasedTableBuilder. Rather, we should pass them back in Finish() and suppress them in Abandon().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7507
Test Plan: Watch existing tests to succeed.
Reviewed By: riversand963
Differential Revision: D24119527
fbshipit-source-id: 71c4d4a81c0fd1c5595224692275f20f7759973a
Summary:
Right now all I/O failures under
PartitionFilterBlock::CacheDependencies() is swallowed. Return error in
case prefetch fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7463
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D24008226
Pulled By: akankshamahajan15
fbshipit-source-id: b65d63b2d01465db92500b78de7ad58650ec9b3b
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
gcc-4.8 returns error when using the constructor. Not sure if it's a compiler bug/limitation or code issue:
```
table/block_based/block_based_table_reader.cc:3183:67: error: use of deleted function ‘rocksdb::WritableFileStringStreamAdapter::WritableFileStringStreamAdapter(rocksdb::WritableFileStringStreamAdapter&&)’
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7358
Reviewed By: pdillinger
Differential Revision: D23577651
Pulled By: jay-zhuang
fbshipit-source-id: b0197e3d3538da61a6f3866410d88d2047fb9695
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7315
Test Plan:
`ASSERT_STATUS_CHECKED=1 make sst_dump_test && ./sst_dump_test`
And manually run `./sst_dump --file=*.sst` before and after the change.
Reviewed By: pdillinger
Differential Revision: D23361669
Pulled By: jay-zhuang
fbshipit-source-id: 5bf51a2a90ee35c8c679e5f604732ec2aef5949a
Summary:
In block-based table builder, the cut-over from buffered to unbuffered
mode involves sampling the buffered blocks and generating a dictionary.
There was a bug where `SstFileWriter` passed zero as the `target_file_size`
causing the cutover to happen immediately, so there were no samples
available for generating the dictionary.
This PR changes the meaning of `target_file_size == 0` to mean buffer
the whole file before cutting over. It also adds dictionary compression
support to `sst_dump --command=recompress` for easy evaluation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7323
Reviewed By: cheng-chang
Differential Revision: D23412158
Pulled By: ajkr
fbshipit-source-id: 3b232050e70ef3c2ee85a4b5f6fadb139c569873
Summary:
A new file interface `SupportPrefetch()` is added. When the user overrides it to `false`, an internal prefetch buffer will be used for readahead. Useful for non-directIO but FS doesn't have readahead support.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7312
Reviewed By: anand1976
Differential Revision: D23329847
Pulled By: jay-zhuang
fbshipit-source-id: 71cd4ce6f4a820840294e4e6aec111ab76175527
Summary:
Right now all I/O failures under PartitionIndexReader::CacheDependencies() is swallowed. This doesn't impact correctness but we've made a decision that any I/O error in read path now should be returned to users for awareness. Return errors in those cases instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7297
Test Plan: Add a new unit test that ingest errors in this code path and see Get() fails. Only one I/O path is hit in PartitionIndexReader::CacheDependencies(). Several option changes are attempt but not able to got other pread paths triggered. Not sure whether other failure cases would be even possible. Would rely on continuous stress test to validate it.
Reviewed By: anand1976
Differential Revision: D23257950
fbshipit-source-id: 859dbc92fa239996e1bb378329344d3d54168c03
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
The patch cleans up and refactors `CompressBlock` and `CompressBlockInternal` a bit.
In particular, it does the following:
* It renames `CompressBlockInternal` to `CompressData` and moves it to `util/compression.h`,
where other general compression-related utilities are located. This will facilitate reuse in the
BlobDB write path.
* The signature of the method is changed so it now takes `compression_format_version`
(similarly to the compression library specific methods) instead of `format_version` (which is
specific to the block based table).
* `GetCompressionFormatForVersion` no longer takes `compression_type` as a parameter.
This parameter was only used in a (not entirely up-to-date) assertion; also, removing it
eliminates the need to ensure this precondition holds at all call sites.
* Does some minor cleanup in `CompressBlock`, for instance, it is now possible to pass
only one of `sampled_output_fast` and `sampled_output_slow`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7249
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23087278
Pulled By: ltamasi
fbshipit-source-id: e6316e45baed8b4e7de7c1780c90501c2a3439b3
Summary:
Introduce io_timeout in ReadOptions and enabled deadline/io_timeout for
Iterators.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7161
Test Plan: New unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22687352
Pulled By: anand1976
fbshipit-source-id: 67bbb0e6d7ae80b256589244468494292538c6ec
Summary:
IteratorIterator::IsOutOfBound() and IteratorIterator::MayBeOutOfUpperBound() are two functions that related to upper bound check. It is hard for users to reason about this complexity. Consolidate the two functions into one and assign an enum as results to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7200
Test Plan: Run all existing test. Would run crash test with atomic for a while.
Reviewed By: anand1976
Differential Revision: D22833181
fbshipit-source-id: a0c724267056adbd0476bde74650e6c7226077e6
Summary:
https://github.com/facebook/rocksdb/pull/5289 introduces a performance regression that caused an upper bound check within every BlockBasedTableIterator::Next(). This is unnecessary if we've checked the boundary key for current block and it is within upper bound.
Fix the bug. Also rename the boolean to a enum so that the code is slightly better readable. The original regression was probably to fix a bug that the block upper bound check status is not reset after a new block is created. Fix it bug so that the regression can be avoided without hitting the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7209
Test Plan: Run all existing tests. Will run atomic black box crash test for a while.
Reviewed By: anand1976
Differential Revision: D22859246
fbshipit-source-id: cbdad1f5e656c55fd8b71726d5a4f6cb53ff9140
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.
This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210
Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.
Reviewed By: anand1976
Differential Revision: D22861323
Pulled By: ajkr
fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
Summary:
PR https://github.com/facebook/rocksdb/issues/6944 transitioned `BlockIter` from using `Comparator*` to using
concrete `UserComparatorWrapper` and `InternalKeyComparator`. However,
adding them as instance variables to `BlockIter` was not optimal.
Bloating `BlockIter` caused the `ArenaWrappedDBIter`'s arena allocator to do more heap
allocations (in certain cases) which harmed performance of `DB::NewIterator()`. This PR
pushes down the concrete comparator objects to the point of usage, which
forces them to be on the stack. As a result, the `BlockIter` is back to
its original size prior to https://github.com/facebook/rocksdb/issues/6944 (actually a bit smaller since there
were two `Comparator*` before).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7149
Test Plan:
verified our internal `DB::NewIterator()`-heavy regression
test no longer reports regression.
Reviewed By: riversand963
Differential Revision: D22623189
Pulled By: ajkr
fbshipit-source-id: f6d69accfe5de51e0bd9874a480b32b29909bab6
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
This is a followup to https://github.com/facebook/rocksdb/issues/6646. In that PR, for simplicity I just appended a comparison against the 0th restart key in case `BinarySeek()`'s binary search landed at index 0. As a result there were `2/(N+1) + log_2(N)` key comparisons. This PR does it differently. Now we expand the binary search range by one so it also covers the case where target is at or before the restart key at index 0. As a result, it involves `log_2(N+1)` key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7068
Test Plan:
ran readrandom with mostly default settings and counted key comparisons
using `PerfContext`.
before: `user_key_comparison_count = 28881965`
after: `user_key_comparison_count = 27823245`
setup command:
```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```
benchmark command:
```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```
Reviewed By: anand1976
Differential Revision: D22357032
Pulled By: ajkr
fbshipit-source-id: 8b01e9c1c2a4e9d02fc9dfe16c1cc0327f8bdf24
Summary:
When format_version is high enough to support user-key and
there are index entries for same user key that spans multiple data
blocks then it changes from user-key mode to internal-key mode. But the
flush policy is not reset to point to Block Builder of internal-keys.
After this switch, no entries are added to user key index partition
result, thus it never triggers flushing the block.
Fix: 1. After adding the entry in sub_builder_index_, if there is a switch
from user-key to internal-key, then flush policy is updated to point to
Block Builder of internal-keys index partition.
2. Set sub_builder_index_->seperator_is_key_plus_seq_ = true if
seperator_is_key_plus_seq_ is set to true so that subsequent partitions
can also use internal key mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7096
Test Plan: make check -j64
Reviewed By: ajkr
Differential Revision: D22416598
Pulled By: akankshamahajan15
fbshipit-source-id: 01fc2dc07ea1b32f8fb803995ebe6e9a3fbe67ac
Summary:
When format_version is high enough to support user-key and there are index entries for same user key that spans multiple data blocks then it changes from user-key mode to internal-key mode. But the flush policy is not reset to point to Block Builder of internal-keys. After this switch, no entries are added to user key index partition result, thus it never triggers flushing the block.
Fix: After adding the entry in sub_builder_index_, if there is a switch from user-key to internal-key, then flush policy is updated to point to Block Builder of internal-keys index partition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7022
Test Plan:
1. make check -j64
2. Added one unit test case
Reviewed By: ajkr
Differential Revision: D22197734
Pulled By: akankshamahajan15
fbshipit-source-id: d87e9e46bccab8e896ee6979d6b79c51f73d479e
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026
Test Plan: watch tests to pass.
Reviewed By: zhichao-cao
Differential Revision: D22223197
fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
Peter Dillinger
