Summary:
Fix bug in O_DIRECT and io_uring when its EOF and bytes_read =
0 because of wrong check, it got added into incomplete list and gets stuck in an infinite loop as it will always return bytes_read = 0. The bug was introduced by PR https://github.com/facebook/rocksdb/pull/10197 and that PR is not released yet in any release branch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10368
Test Plan: Added new unit test
Reviewed By: siying
Differential Revision: D37885184
Pulled By: akankshamahajan15
fbshipit-source-id: 35b36a44b696d29b2f6f25301aa1b19547b4e03b
Summary:
Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278
Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions.
Reviewed By: hx235
Differential Revision: D37640946
Pulled By: littlepig2013
fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367
Summary:
Even after https://github.com/facebook/rocksdb/issues/10069, `BackupEngineTest.Concurrency` is still flaky with decreased probability of failure.
Repro steps as follows
```bash
make backup_engine_test
gtest-parallel -r 1000 -w 64 ./backup_engine_test --gtest_filter=BackupEngineTest.Concurrency
```
The first two commits of this PR demonstrate how the test is flaky. https://github.com/facebook/rocksdb/issues/10069 handles the case in which
`Rename()` file returns `IOError` with subcode `PathNotFound`, and `CreateLoggerFromOptions()`
allows the operation to succeed, as expected by the test. However, `BackupEngineTest` uses
`RemapFileSystem` on top of `ChrootFileSystem` which can return `NotFound` instead of `IOError`.
This behavior is different from `Env::Default()` which returns PathNotFound if the src of `rename()`
does not exist. We should make the behaviors of the test Env/FS match a real Env/FS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10228
Test Plan:
```bash
make check
gtest-parallel -r 1000 -w 64 ./backup_engine_test --gtest_filter=BackupEngineTest.Concurrency
```
Reviewed By: pdillinger
Differential Revision: D37337241
Pulled By: riversand963
fbshipit-source-id: 07a53115e424467b55a731866e571f0ad4c6635d
Summary:
A recent PR https://github.com/facebook/rocksdb/pull/10142 enabled fadvise for mmaped file. However, we were told that it might not take effective and madvise() should be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10170
Test Plan:
Run existing tests
Run a benchmark using mmap with advise random and see I/O size is indeed small.
Reviewed By: anand1976
Differential Revision: D37158582
fbshipit-source-id: 8b3a74f0e89d2e16aac78ee4124c05841d4135c3
Summary:
Fix for Internal jobs are failing with
```
error: no matching function for call to 'io_uring_prep_cancel'
io_uring_prep_cancel(sqe, posix_handle, 0);
^~~~~~~~~~~~~~~~~~~~
note: candidate function not viable: no known conversion from 'rocksdb::Posix_IOHandle *' to '__u64' (aka 'unsigned long long') for 2nd argument
static inline void io_uring_prep_cancel(struct io_uring_sqe *sqe,
```
User data is set using `io_uring_set_data` API so no need to pass posix_handle here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10165
Test Plan: CircleCI jobs
Reviewed By: jay-zhuang
Differential Revision: D37145233
Pulled By: akankshamahajan15
fbshipit-source-id: 05da650e1240e9c6fcc8aed5f0067308dccb164a
Summary:
Implement AbortIO in posix using io_uring to cancel any pending read requests submitted. Its cancelled using io_uring_prep_cancel which sets the IORING_OP_ASYNC_CANCEL flag.
To cancel a request, the sqe must have ->addr set to the user_data of the request it wishes to cancel. If the request is cancelled successfully, the original request is completed with -ECANCELED and the cancel request is completed with a result of 0. If the request was already running, the original may or may not complete in error. The cancel request will complete with -EALREADY for that case. And finally, if the request to cancel wasn't found, the cancel request is completed with -ENOENT.
Reference: https://kernel.dk/io_uring-whatsnew.pdf,
https://lore.kernel.org/io-uring/d9a8d76d23690842f666c326631ecc2d85b6c1bc.1615566409.git.asml.silence@gmail.com/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10125
Test Plan: Existing Posix tests.
Reviewed By: anand1976
Differential Revision: D36946970
Pulled By: akankshamahajan15
fbshipit-source-id: 3bc1f1521b3151d01a348fc6431eb3fc85db3a14
Summary:
Right now with mmap file, we don't run fadvise following users' requests. There is no reason for that so this diff does that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10142
Test Plan:
A simple readrandom against files with page cache dropped shows latency improvement from 7.8 us to 2.8:
./db_bench -use_existing_db --benchmarks=readrandom --num=100
Reviewed By: anand1976
Differential Revision: D37074975
fbshipit-source-id: ccc72bcac1b5fd634eb8fa2b6a5d9afe332e0bf6
Summary:
In [close_db_dir](https://github.com/facebook/rocksdb/pull/10049) pull request, some merging conflicts occurred (some comments and one line `s.PermitUncheckedError()` are missing). This pull request aims to put them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10093
Reviewed By: ajkr
Differential Revision: D36884117
Pulled By: littlepig2013
fbshipit-source-id: 8c0e2a8793fc52804067c511843bd1ff4912c1c3
Summary:
Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run
```
strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing
```
There is one directory file descriptor that is not closed in the strace log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049
Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent.
Reviewed By: ajkr, hx235
Differential Revision: D36722135
Pulled By: littlepig2013
fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff
Summary:
RocksDB uses the (no longer aptly named) SST file manager (see https://github.com/facebook/rocksdb/wiki/Managing-Disk-Space-Utilization) to track and potentially limit the space used by SST and blob files (as well as to rate-limit the deletion of these data files). The SST file manager tracks the SST and blob file sizes in an in-memory hash map, which has to be rebuilt during DB open. File sizes can be generally obtained by querying the file system; however, there is a performance optimization possibility here since the sizes of SST and blob files are also tracked in the RocksDB MANIFEST, so we can simply pass the file sizes stored there instead of consulting the file system for each file. Currently, this optimization is only implemented for SST files; we would like to extend it to blob files as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10062
Test Plan:
Add unit tests for the change to the test suite
ltamasi riversand963 akankshamahajan15
Reviewed By: ltamasi
Differential Revision: D36726621
Pulled By: gangliao
fbshipit-source-id: 4010dc46ef7306142f1c2e0d1c3bf75b196ef82a
Summary:
There are some time-related POSIX APIs that are not available on Windows
(e.g. `localtime_r`), which we have worked around by providing our own
implementations in `port/sys_time.h`. This workaround actually relies on
some ambiguity: on Windows, a call to `localtime_r` calls
`ROCKSDB_NAMESPACE::port::localtime_r` (which is pulled into
`ROCKSDB_NAMESPACE` by a using-declaration), while on other platforms
it calls the global `localtime_r`. This works fine as long as there is only one
candidate function; however, it breaks down when there is more than one
`localtime_r` visible in a scope.
The patch fixes this by introducing `ROCKSDB_NAMESPACE::port::{TimeVal, GetTimeOfDay, LocalTimeR}`
to eliminate any ambiguity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10045
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D36639372
Pulled By: ltamasi
fbshipit-source-id: fc13dbfa421b7c8918111a6d9e24ce77e91a7c50
Summary:
Added rate limiter and read rate-limiting support to SequentialFileReader. I've updated call sites to SequentialFileReader::Read with appropriate IO priority (or left a TODO and specified IO_TOTAL for now).
The PR is separated into four commits: the first one added the rate-limiting support, but with some fixes in the unit test since the number of request bytes from rate limiter in SequentialFileReader are not accurate (there is overcharge at EOF). The second commit fixed this by allowing SequentialFileReader to check file size and determine how many bytes are left in the file to read. The third commit added benchmark related code. The fourth commit moved the logic of using file size to avoid overcharging the rate limiter into backup engine (the main user of SequentialFileReader).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9973
Test Plan:
- `make check`, backup_engine_test covers usage of SequentialFileReader with rate limiter.
- Run db_bench to check if rate limiting is throttling as expected: Verified that reads and writes are together throttled at 2MB/s, and at 0.2MB chunks that are 100ms apart.
- Set up: `./db_bench --benchmarks=fillrandom -db=/dev/shm/test_rocksdb`
- Benchmark:
```
strace -ttfe read,write ./db_bench --benchmarks=backup -db=/dev/shm/test_rocksdb --backup_rate_limit=2097152 --use_existing_db
strace -ttfe read,write ./db_bench --benchmarks=restore -db=/dev/shm/test_rocksdb --restore_rate_limit=2097152 --use_existing_db
```
- db bench on backup and restore to ensure no performance regression.
- backup (avg over 50 runs): pre-change: 1.90443e+06 micros/op; post-change: 1.8993e+06 micros/op (improve by 0.2%)
- restore (avg over 50 runs): pre-change: 1.79105e+06 micros/op; post-change: 1.78192e+06 micros/op (improve by 0.5%)
```
# Set up
./db_bench --benchmarks=fillrandom -db=/tmp/test_rocksdb -num=10000000
# benchmark
TEST_TMPDIR=/tmp/test_rocksdb
NUM_RUN=50
for ((j=0;j<$NUM_RUN;j++))
do
./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=backup -use_existing_db | egrep 'backup'
# Restore
#./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=restore -use_existing_db
done > rate_limit.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' rate_limit.txt >> rate_limit_2.txt
```
Reviewed By: hx235
Differential Revision: D36327418
Pulled By: cbi42
fbshipit-source-id: e75d4307cff815945482df5ba630c1e88d064691
Summary:
Changed the static objects that had non-trivial destructors to use the STATIC_AVOID_DESTRUCTION construct.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9958
Reviewed By: pdillinger
Differential Revision: D36442982
Pulled By: mrambacher
fbshipit-source-id: 029d47b1374d30d198bfede369a4c0ae7a4eb519
Summary:
These methods allow for more thorough testing of the ObjectRegistry and Customizable infrastructure in a simpler manner. With this change, the Customizable tests can now check what factories are registered and attempt to create each of them in a systematic fashion.
With this change, I think all of the factories registered with the ObjectRegistry/CreateFromString are now tested via the customizable_test classes.
Note that there were a few other minor changes. There was a "posix://*" register with the ObjectRegistry which was missed during the PatternEntry conversion -- these changes found that. The nickname and default names for the FileSystem classes was also inverted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9358
Reviewed By: pdillinger
Differential Revision: D33433542
Pulled By: mrambacher
fbshipit-source-id: 9a32da74e6620745b4eeffb2712be70eeeadfa7e
Summary:
Add methods to set the various functions (Parse, Serialize, Equals) to the OptionTypeInfo. These methods simplify the number of constructors required for OptionTypeInfo and make the code a little clearer.
Add functions to the OptionTypeInfo for Prepare and Validate. These methods allow types other than Configurable and Customizable to have Prepare and Validate logic. These methods could be used by an option to guarantee that its settings were in a range or that a value was initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9411
Reviewed By: pdillinger
Differential Revision: D36174849
Pulled By: mrambacher
fbshipit-source-id: 72517d8c6bab4723788a4c1a9e16590bff870125
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
If FilePrefetchBuffer object is destroyed and then later Poll() calls callback on object which has been destroyed, it gives segfault on accessing destroyed object. It was caught after adding unit tests that tests Posix implementation of ReadAsync and Poll APIs.
This PR also updates and fixes existing IOURing tests which were not running locally because RocksDbIOUringEnable function wasn't defined and IOUring was disabled for those tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9777
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D35254002
Pulled By: akankshamahajan15
fbshipit-source-id: 68e80054ffb14ae25c255920ebc6548ca5f130a1
Summary:
Multiplier here should be 1e6 to get microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9695
Reviewed By: ajkr
Differential Revision: D34897086
Pulled By: jay-zhuang
fbshipit-source-id: 9c1d0811ea740ba0a007edc2da199edbd000b88b
Summary:
Provide support for Async Read and Poll in Posix file system using IOUring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9578
Test Plan: In progress
Reviewed By: anand1976
Differential Revision: D34690256
Pulled By: akankshamahajan15
fbshipit-source-id: 291cbd1380a3cb904b726c34c0560d1b2ce44a2e
Summary:
SMB mounts do not support hard links. The ENOTSUP error code is
returned, which should be interpreted by PosixFileSystem as
IOStatus::NotSupported().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9657
Reviewed By: mrambacher
Differential Revision: D34634783
Pulled By: anand1976
fbshipit-source-id: 0d57f5b2e6118e4c20e9ed1a293327428c3aecac
Summary:
In preparation for more support for file Temperatures in BackupEngine,
this change does some test refactoring:
* Move DBTest2::BackupFileTemperature test to
BackupEngineTest::FileTemperatures, with some updates to make it work
in the new home. This test will soon be expanded for deeper backup work.
* Move FileTemperatureTestFS from db_test2.cc to db_test_util.h, to
support sharing because of above moved test, but split off the "no link"
part to the test needing it.
* Use custom FileSystems in backupable_db_test rather than custom Envs,
because going through Env file interfaces doesn't support temperatures.
* Fix RemapFileSystem to map DirFsyncOptions::renamed_new_name
parameter to FsyncWithDirOptions, which was required because this
limitation caused a crash only after moving to higher fidelity of
FileSystem interface (vs. LegacyDirectoryWrapper throwing away some
parameter details)
* `backupable_options_` -> `engine_options_` as part of the ongoing
work to get rid of the obsolete "backupable" naming.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9655
Test Plan: test code updates only
Reviewed By: jay-zhuang
Differential Revision: D34622183
Pulled By: pdillinger
fbshipit-source-id: f24b7a596a89b9e089e960f4e5d772575513e93f
Summary:
Update the signature of Poll and ReadAsync APIs in filesystem.
Instead of unique_ptr, void** will be passed as io_handle and the delete function.
io_handle and delete function should be provided by underlying
FileSystem and its lifetime will be maintained by RocksDB. io_handle
will be deleted by RocksDB once callback is made to update the results or Poll is
called to get the results.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9623
Test Plan: Add a new unit test.
Reviewed By: anand1976
Differential Revision: D34403529
Pulled By: akankshamahajan15
fbshipit-source-id: ea185a5f4c7bec334631e4f781ea7ba4135645f0
Summary:
This fix addresses https://github.com/facebook/rocksdb/issues/9299.
If attempting to create a new object via the ObjectRegistry and a factory is not found, the ObjectRegistry will return a "NotSupported" status. This is the same behavior as previously.
If the factory is found but could not successfully create the object, an "InvalidArgument" status is returned. If the factory returned a reason why (in the errmsg), this message will be in the returned status.
In practice, there are two options in the ConfigOptions that control how these errors are propagated:
- If "ignore_unknown_options=true", then both InvalidArgument and NotSupported status codes will be swallowed internally. Both cases will return success
- If "ignore_unsupported_options=true", then having no factory will return success but a failing factory will return an error
- If both options are false, both cases (no and failing factory) will return errors.
In practice this likely only changes Customizable that may be partially available. For example, the JEMallocMemoryAllocator is a built-in allocator that is registered with the system but may not be compiled in. In this case, the status code for this allocator changed from NotSupported("JEMalloc not available") to InvalidArgumen("JEMalloc not available"). Other Customizable builtins/plugins would have the same semantics.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9333
Reviewed By: pdillinger
Differential Revision: D33517681
Pulled By: mrambacher
fbshipit-source-id: 8033052d4a4a7b88c2d9f90147b1b4467e51f6fd
Summary:
Thread-pool pops a thread function and then run the function,
which may cause thread-pool is empty but the last function is still
running.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9502
Test Plan:
`gtest-parallel ./env_test
--gtest_filter=DefaultEnvWithoutDirectIO/EnvPosixTestWithParam.RunMany/0
-r 10000 -w 1000`
Reviewed By: ajkr
Differential Revision: D34011184
Pulled By: jay-zhuang
fbshipit-source-id: 8c38bef155205bef96fd1c988dcc643a6b2ac270
Summary:
Drop support for some old compilers by requiring C++17 standard
(or higher). See https://github.com/facebook/rocksdb/issues/9388
First modification based on this is to remove some conditional compilation in slice.h (also
better for ODR)
Also in this PR:
* Fix some Makefile formatting that seems to affect ASSERT_STATUS_CHECKED config in
some cases
* Add c_test to NON_PARALLEL_TEST in Makefile
* Fix a clang-analyze reported "potential leak" in lru_cache_test
* Better "compatibility" definition of DEFINE_uint32 for old versions of gflags
* Fix a linking problem with shared libraries in Makefile (`./random_test: error while loading shared libraries: librocksdb.so.6.29: cannot open shared object file: No such file or directory`)
* Always set ROCKSDB_SUPPORT_THREAD_LOCAL and use thread_local (from C++11)
* TODO in later PR: clean up that obsolete flag
* Fix a cosmetic typo in c.h (https://github.com/facebook/rocksdb/issues/9488)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9481
Test Plan:
CircleCI config substantially updated.
* Upgrade to latest Ubuntu images for each release
* Generally prefer Ubuntu 20, but keep a couple Ubuntu 16 builds with oldest supported
compilers, to ensure compatibility
* Remove .circleci/cat_ignore_eagain except for Ubuntu 16 builds, because this is to work
around a kernel bug that should not affect anything but Ubuntu 16.
* Remove designated gcc-9 build, because the default linux build now uses GCC 9 from
Ubuntu 20.
* Add some `apt-key add` to fix some apt "couldn't be verified" errors
* Generally drop SKIP_LINK=1; work-around no longer needed
* Generally `add-apt-repository` before `apt-get update` as manual testing indicated the
reverse might not work.
Travis:
* Use gcc-7 by default (remove specific gcc-7 and gcc-4.8 builds)
* TODO in later PR: fix s390x "Assembler messages: Error: invalid switch -march=z14" failure
AppVeyor:
* Completely dropped because we are dropping VS2015 support and CircleCI covers
VS >= 2017
Also local testing with old gflags (out of necessity when using ROCKSDB_NO_FBCODE=1).
Reviewed By: mrambacher
Differential Revision: D33946377
Pulled By: pdillinger
fbshipit-source-id: ae077c823905b45370a26c0103ada119459da6c1
Summary:
Added a CountedFileSystem that tracks a number of file operations (opens, closes, deletes, renames, flushes, syncs, fsyncs, reads, writes). This class was based on the ReportFileOpEnv from db_bench.
This is a stepping stone PR to be able to change the SpecialEnv into a SpecialFileSystem, where several of the file varieties wish to do operation counting.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9283
Reviewed By: pdillinger
Differential Revision: D33062004
Pulled By: mrambacher
fbshipit-source-id: d0d297a7fb9c48c06cbf685e5fa755c27193b6f5
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
We see:
[ RUN ] ChrootEnvWithDirectIO/EnvPosixTestWithParam.RunMany/0
env/env_test.cc:464: Failure
Expected equality of these values:
4
cur
Which is: 0
The suspicious is that the wait time is not long enough. Increase the wait time to 10s and allows earlier check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9413
Test Plan: Run the test
Reviewed By: riversand963
Differential Revision: D33697715
fbshipit-source-id: 3d71715562a8cceb694b773276dd9e4e451a18bc
Summary:
Loose ends relate to mmap on 32-bit systems. (Testing is more
complicated when the feature was completely disabled on 32-bit.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9386
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D33590715
Pulled By: pdillinger
fbshipit-source-id: f2637036a538a552200adee65b6765fce8cae27b
Summary:
Closing https://github.com/facebook/rocksdb/issues/5954
fsync/fdatasync on Linux:
```
(fsync/fdatasync) includes writing through or flushing a disk cache if present.
```
However, on OS X and iOS:
```
(fsync) will flush all data from the host to the drive (i.e. the "permanent storage device"),
the drive itself may not physically write the data to the platters for quite some time and it
may be written in an out-of-order sequence.
```
Solution is to use `fcntl(F_FULLFSYNC)` on OS X so that we get the same
persistence guarantee.
According to OSX man page,
```
The F_FULLFSYNC fcntl asks the drive to flush **all** buffered data to permanent storage.
```
This suggests that it will be no faster than `fsync` on Linux, since Linux, according to its man page,
```
writing through or flushing a disk cache if present
```
It means Linux may not flush **all** data from disk cache.
This is similar to bug reports/fixes in:
- golang: https://github.com/golang/go/issues/26650
- leveldb: 296de8d5b8.
Not sure if we should fallback to fsync since we break persistence contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9356
Reviewed By: jay-zhuang
Differential Revision: D33417416
Pulled By: riversand963
fbshipit-source-id: 475548ff9c5eaccde325e0f6842694271cbc8cb7
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Added new ObjectLibrary::Entry classes to replace/reduce the use of Regex. For simple factories that only do name matching, there are "StringEntry" and "AltStringEntry" classes. For classes that use some semblance of regular expressions, there is a PatternEntry class that can match a name and prefixes. There is also a class for Customizable::IndividualId format matches.
Added tests for the new derivative classes and got all unit tests to pass.
Resolves https://github.com/facebook/rocksdb/issues/9225.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9264
Reviewed By: pdillinger
Differential Revision: D33062001
Pulled By: mrambacher
fbshipit-source-id: c2d2143bd2d38bdf522705c8280c35381b135c03
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
* added missing override specifiers for overriden methods
this fixes compiler warnings emitted by g++ and clang++ when compile option `-Wsuggest-override` is turned on.
* fix compile warning with -Wmaybe-uninitialized
g++-11 warns about a _potentially_ uninitialized variable when using `-Wmaybe_uninitialized`:
```
env/env.cc: In member function ‘virtual rocksdb::Status rocksdb::Env::GetHostNameString(std::string*)’:
env/env.cc:738:66: error: ‘hostname_buf’ may be used uninitialized [-Werror=maybe-uninitialized]
738 | Status s = GetHostName(hostname_buf.data(), hostname_buf.size());
| ^
In file included from /usr/include/c++/11/tuple:39,
from /usr/include/c++/11/functional:54,
from ./include/rocksdb/env.h:22,
from env/env.cc:10:
/usr/include/c++/11/array:176:7: note: by argument 1 of type ‘const std::array<char, 256>*’ to ‘constexpr std::array<_Tp, _Nm>::size_type std::array<_Tp, _Nm>::size() const [with _Tp = char; long unsigned int _Nm = 256]’ declared here
176 | size() const noexcept { return _Nm; }
| ^~~~
env/env.cc:737:37: note: ‘hostname_buf’ declared here
737 | std::array<char, kMaxHostNameLen> hostname_buf;
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9199
Reviewed By: jay-zhuang
Differential Revision: D32630703
Pulled By: pdillinger
fbshipit-source-id: 9ea3010b1105a582548e3c3c0db4475b201e4a10
Summary:
This makes it easier to debug with tools like `ps`. The change only
applies to builds with glibc 2.30+ and _GNU_SOURCE extensions enabled.
We could adopt it in more cases by using the syscall but this is enough
for our build.
Replaces https://github.com/facebook/rocksdb/issues/2973.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9164
Test Plan:
- ran some benchmarks and correlated logged thread IDs with those shown by `ps -L`.
- verified no noticeable regression in throughput for log heavy (more than 700k log lines and over 5k / second) scenario.
Benchmark command:
```
$ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom -compression_type=none -max_bytes_for_level_multiplier=2 -write_buffer_size=262144 -num_levels=7 -max_bytes_for_level_base=2097152 -target_file_size_base=524288 -level_compaction_dynamic_level_bytes=true -max_background_jobs=12 -num=20000000
```
Results before: 15.9MB/s, 15.8MB/s, 16.0MB/s
Results after: 16.3MB/s, 16.3MB/s, 15.8MB/s
- Rely on CI to test the fallback behavior
Reviewed By: riversand963
Differential Revision: D32399660
Pulled By: ajkr
fbshipit-source-id: c24d44fdf7782faa616ef0a0964eaca3539d9c24
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Akanksha Mahajan