Summary:
**Context/Summary:**
- Allow runtime changes to whether `WriteBufferManager` allows stall or not by calling `SetAllowStall()`
- Misc: some clean up - see PR conversation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11335
Test Plan: - New UT
Reviewed By: akankshamahajan15
Differential Revision: D44502555
Pulled By: hx235
fbshipit-source-id: 24b5cc57df7734b11d42e4870c06c87b95312b5e
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
…evel_bytes
During DB open, if a column family uses level compaction with level_compaction_dynamic_level_bytes=true, trivially move its files down in the LSM such that the bottommost files are in Lmax, the second from bottommost level files are in Lmax-1 and so on. This is aimed to make it easier to migrate level_compaction_dynamic_level_bytes from false to true. Before this change, a full manual compaction is suggested for such migration. After this change, user can just restart DB to turn on this option. db_crashtest.py is updated to randomly choose value for level_compaction_dynamic_level_bytes.
Note that there may still be too many unnecessary levels if a user is migrating from universal compaction or level compaction with a smaller level multiplier. A full manual compaction may still be needed in that case before some PR that automatically drain unnecessary levels like https://github.com/facebook/rocksdb/issues/3921 lands. Eventually we may want to change the default value of option level_compaction_dynamic_level_bytes to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11321
Test Plan:
1. Added unit tests.
2. Crash test: ran a variation of db_crashtest.py (like 32516507e77521ae887e45091b69139e32e8efb7) that turns level_compaction_dynamic_level_bytes on and off and switches between LC and UC for the same DB.
TODO: Update `OptionChangeMigration`, either after this PR or https://github.com/facebook/rocksdb/issues/3921.
Reviewed By: ajkr
Differential Revision: D44341930
Pulled By: cbi42
fbshipit-source-id: 013de19a915c6a0502be569f07c4cc8f1c3c6be2
Summary:
In DBCompactionTest::CancelCompactionWaitingOnConflict, when generating SST files to trigger a compaction, we don't wait after each file, which may cause multiple memtables going to the same SST file, causing insufficient files to trigger the compaction. We do the waiting instead, except the last one, which would trigger compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11318
Test Plan: Run DBCompactionTest.CancelCompactionWaitingOnConflict multiple times.
Reviewed By: ajkr
Differential Revision: D44267273
fbshipit-source-id: 86af49b05fc67ea3335312f0f5f3d22df1520bf8
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
Summary:
In PosixFileSystem, IO uring support is opt-in. If the support is not enabled by the user, then ignore the async_io ReadOption in MultiGet and iteration at the top, rather than follow the async_io codepath and transparently switch to sync IO at the FileSystem layer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11296
Test Plan: Add new unit tests
Reviewed By: akankshamahajan15
Differential Revision: D44045776
Pulled By: anand1976
fbshipit-source-id: a0881bf763ca2fde50b84063d0068bb521edd8b9
Summary:
In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic.
This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code.
gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper.
Also refactored some related test code to share common code / functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D44101453
Pulled By: pdillinger
fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345
Summary:
... ahead of a larger change.
* Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache`
* Unify naming of "standalone" block cache entries (was "detached" in clock_cache)
* Remove some unused definitions in clock_cache.h (leftover from a previous revision)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291
Test Plan: usual tests and CI, no behavior changes
Reviewed By: anand1976
Differential Revision: D43984642
Pulled By: pdillinger
fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97
Summary:
**Context:**
Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes .
```
./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 10
kill $pid
sleep 0.2
./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 40
kill $pid
sleep 0.2
Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound:
Crash-recovery verification failed :(
No writes or ops?
Verification failed :(
```
The bug is due to the following:
- When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`.
- But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N.
- However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M.
**Summary:**
- Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`.
- For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148
Test Plan:
- New unit test failed before the fix and passes after
- Make check
- Rehearsal stress test
Reviewed By: ajkr
Differential Revision: D42799871
Pulled By: hx235
fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
Summary:
In rare cases seeing failures like this
```
[ RUN ] DBWriteTestInstance/DBWriteTest.LockWALInEffect/2
db/db_write_test.cc:653: Failure
Put("key3", "value")
Corruption: Not active
```
in a test with no explicit threading. This is likely because of the unpredictability of background auto-resume. I didn't really know this feature, in part because DB::Resume() was undocumented. So I believe I have fixed the test and documented the API function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11290
Test Plan: 1000s of stress runs of the test with gtest-parallel
Reviewed By: anand1976
Differential Revision: D43984583
Pulled By: pdillinger
fbshipit-source-id: d30dec120b4864e193751b2e33ff16834d313db3
Summary:
CreateColumnFamilyWithImport() did not support range tombstones for two reasons:
1. it uses point keys of a input file to determine its boundary (smallest and largest internal key), which means range tombstones outside of the point key range will be effectively dropped.
2. it does not handle files with no point keys.
Also included a fix in external_sst_file_ingestion_job.cc where the blocks read in `GetIngestedFileInfo()` can be added to block cache now (issue fixed in https://github.com/facebook/rocksdb/pull/6429).
This PR adds support for exporting and importing column family with range tombstones. The main change is to add smallest internal key and largest internal key to `SstFileMetaData` that will be part of the output of `ExportColumnFamily()`. Then during `CreateColumnFamilyWithImport(...,const ExportImportFilesMetaData& metadata,...)`, file boundaries can be set from `metadata` directly. This is needed since when file boundaries are extended by range tombstones, sometimes they cannot be deduced from a file's content alone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11252
Test Plan:
- added unit tests that fails before this change
Closes https://github.com/facebook/rocksdb/issues/11245
Reviewed By: ajkr
Differential Revision: D43577443
Pulled By: cbi42
fbshipit-source-id: 6bff78e583cc50c44854994dea0a8dd519398f2f
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
`BlobSourceCacheReservationTest.IncreaseCacheReservationOnFullCache` is both flaky and also doesn't do what its name says. The patch changes this test so it actually tests increasing the cache reservation, hopefully also deflaking it in the process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11273
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43800935
Pulled By: ltamasi
fbshipit-source-id: 5eb54130dfbe227285b0e14f2084aa4b89f0b107
Summary:
Hi. :) Noticed we are copying ColumnFamilyDescriptor here because my process crashed during copy constructor (cause unrelated)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10978
Reviewed By: cbi42
Differential Revision: D41473924
Pulled By: ajkr
fbshipit-source-id: 58a3473f2d7b24918f79d4b2726c20081c5e95b4
Summary:
During backward iteration, blob verification would fail because the user key (ts included) in `saved_key_` doesn't match the blob. This happens because during`FindValueForCurrentKey`, `saved_key_` is not updated when the user key(ts not included) is the same for all cases except when `timestamp_lb_` is specified. This breaks the blob verification logic when user defined timestamp is enabled and `timestamp_lb_` is not specified. Fix this by always updating `saved_key_` when a smaller user key (ts included) is seen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11258
Test Plan:
`make check`
`./db_blob_basic_test --gtest_filter=DBBlobWithTimestampTest.IterateBlobs`
Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced with:
`./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5`
Baseline:
- seekrandom [AVG 6 runs] : 72188 (± 1481) ops/sec; 37.2 (± 0.8) MB/sec
With this PR:
- seekrandom [AVG 6 runs] : 74171 (± 1427) ops/sec; 38.2 (± 0.7) MB/sec
Reviewed By: ltamasi
Differential Revision: D43675642
Pulled By: jowlyzhang
fbshipit-source-id: 8022ae8522d1f66548821855e6eed63640c14e04
Summary:
This makes it possible to eliminate some copies in `GetEntity` / `MultiGetEntity`,
in particular when `Merge`s or blobs are involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11248
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43544215
Pulled By: ltamasi
fbshipit-source-id: bc4c8955a24bbd8bc4ab098e72133ead757f9707
Summary:
A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)).
The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113
Test Plan:
* added unit test in db_range_del_test
* crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10`
Reviewed By: ajkr
Differential Revision: D42655709
Pulled By: cbi42
fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
Summary:
Fix complain
```
db/db_impl/db_impl_compaction_flush.cc:417:19: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:417:8: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
db/db_impl/db_impl_compaction_flush.cc:2911:21: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:2911:10: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
```
from
```sh
xxx@MacBook-Pro / % g++ -v
Configured with: --prefix=/Library/Developer/CommandLineTools/usr --with-gxx-include-dir=/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/c++/4.2.1
Apple clang version 12.0.0 (clang-1200.0.32.29)
Target: x86_64-apple-darwin21.6.0
Thread model: posix
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11240
Reviewed By: cbi42
Differential Revision: D43458729
Pulled By: ajkr
fbshipit-source-id: 26e110f83451509463a1bc308f737ccb693c9f45
Summary:
in DBIter::SeekToLast(), key() can be called when iter is invalid and fails the following assertion:
```
./db/db_iter.h:153: virtual rocksdb::Slice rocksdb::DBIter::key() const: Assertion `valid_' failed.
```
This happens when `iterate_upper_bound` and timestamp_lb_ are set. SeekForPrev(*iterate_upper_bound_) positions the iterator on the same user key as *iterate_upper_bound_. A subsequent PrevInternal() call makes the iterator invalid just be the call to key().
This PR fixes this issue by setting updating the seek key to have max sequence number AND max timestamp when the seek key has the same user key as *iterate_upper_bound_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11223
Test Plan: - Added a unit test that would fail the above assertion before this fix.
Reviewed By: jowlyzhang
Differential Revision: D43283600
Pulled By: cbi42
fbshipit-source-id: 0dd3999845b722584679bbc95be2664b266005ba
Summary:
This PR adds support to the c-api bindings for calling `Flush()` with multiple column families, which is useful for performing atomic flushes (assuming also that the db has been opened with `atomic_flush = true`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11112
Reviewed By: cbi42
Differential Revision: D42666382
Pulled By: ajkr
fbshipit-source-id: 82f05bf32d28452d85c79ea42411c8fea961fd87
Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions.
This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231
Test Plan: updated unit test
Reviewed By: akankshamahajan15
Differential Revision: D43396607
Pulled By: ajkr
fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.
Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43256950
Pulled By: ltamasi
fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
Summary:
The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment.
In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544
Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it.
Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192
Test Plan: `make check`
Reviewed By: anand1976
Differential Revision: D43055487
Pulled By: pdillinger
fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
Summary:
Example failure:
```
[ RUN ] DBWriteTestInstance/DBWriteTest.LockWALInEffect/1
db/db_write_test.cc:646: Failure
Put("key3", "value")
Corruption: Not active
```
Presumably from a background compaction prior to Put.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11209
Test Plan: watch CI
Reviewed By: akankshamahajan15
Differential Revision: D43147727
Pulled By: pdillinger
fbshipit-source-id: a1c34ac5ab124bfe2f23205a30777990056e9082
Summary:
Fix a bug in the calculation of the input buffer address/offset in log_reader.cc. The bug is when consecutive fragments of a compressed record are located at the same offset in the log reader buffer, the second fragment input buffer is treated as a leftover from the previous input buffer. As a result, the offset in the `ZSTD_inBuffer` is not reset.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11198
Test Plan: Add a unit test in log_test.cc that fails without the fix and passes with it.
Reviewed By: ajkr, cbi42
Differential Revision: D43102692
Pulled By: anand1976
fbshipit-source-id: aa2648f4802c33991b76a3233c5a58d4cc9e77fd
Summary:
The patch adds compaction filter support for wide-column entities by introducing
a new `CompactionFilter` API called `FilterV3`. This API is called for regular
key-values, merge operands, and wide-column entities as well. It is passed the
existing value/operand or wide-column structure and it can update the value or
columns or keep/delete/etc. the key-value as usual. For compatibility, the default
implementation of `FilterV3` keeps all wide-column entities and falls back to calling
`FilterV2` for plain old key-values and merge operands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11196
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43094147
Pulled By: ltamasi
fbshipit-source-id: 75acabe9a35254f7f404ba6173ee9c2774382ebd
Summary:
This option has long been intended to be set to false by default and deprecated. It might never be practical to completely remove the feature, so that we can continue to test for backward compatibility by keeping the ability to generate DBs in the old way.
Also improved API comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11179
Test Plan: existing tests (with one tiny update)
Reviewed By: hx235
Differential Revision: D42973927
Pulled By: pdillinger
fbshipit-source-id: e9bc161cb933266e094aea2dff8cc03753c39dab
Summary:
Fixes https://github.com/facebook/rocksdb/issues/11160
By counting the number of stalls placed on a write queue, we can check in UnlockWAL() whether the stall present at the start of UnlockWAL() has been cleared by the end, or wait until it's cleared.
More details in code comments and new unit test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11172
Test Plan: unit test added. Yes, it uses sleep to amplify failure on buggy behavior if present, but using a sync point to only allow new behavior would fail with the old code only because it doesn't contain the new sync point. Basically, using a sync point in UnlockWAL() could easily mask a regression by artificially limiting key behaviors. The test would only check that UnlockWAL() invokes code that *should* do the right thing, without checking that it *does* the right thing.
Reviewed By: ajkr
Differential Revision: D42894341
Pulled By: pdillinger
fbshipit-source-id: 15c9da0ca383e6aec845b29f5447d76cecbf46c3
Summary:
Currently, we incorrectly return a Status::Corruption to the MultiGet caller if the file system ReadAsync cannot issue a read and returns an error for some reason, such as IOStatus::NotSupported(). In this PR, we copy the ReadAsync error to the request status so it can be returned to the user.
Tests:
Update existing unit tests and add a new one for this scenario
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11171
Reviewed By: akankshamahajan15
Differential Revision: D42950057
Pulled By: anand1976
fbshipit-source-id: 85ffcb015fa6c064c311f8a28488fec78c487869
Summary:
The patch makes some code quality enhancements in `CompactionIterator::InvokeFilterIfNeeded`
including the renaming of `filter` (which is most likely a remnant of the days before the `FilterV2`
API when the compaction filter used to return a boolean) to `decision`, the removal of some
outdated comments, the elimination of an `error` flag which was only used in one failure case
out of many, as well as some small stylistic improvements. (Some the above will also come in
handy when adding compaction filter support for wide-column entities.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11174
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42901408
Pulled By: ltamasi
fbshipit-source-id: ab382d59a4990c5dfe1cee219d49e1d80902b666
Summary:
This PR adds logic to the `RunManualCompaction()` loop to check for cancellation before waiting on any conflicting compactions to finish. In case of cancellation, `RunManualCompaction()` no longer waits on conflicting compactions
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11165
Test Plan: repro test case
Reviewed By: cbi42
Differential Revision: D42864058
Pulled By: ajkr
fbshipit-source-id: ea4dd1a8f294abe212905495a8fbe8f07fca3f5a
Summary:
The patch fixes a feature interaction bug between BlobDB and the `GetEntity` API:
without the patch, `GetEntity` would return the blob reference (wrapped into a
single-column entity) instead of the actual blob value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11162
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42854092
Pulled By: ltamasi
fbshipit-source-id: f750d0ff57def107da16f545077ddce9860ff21a
Summary:
The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change:
* Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use.
* Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions)
* Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability)
* Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other.
* Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads.
* Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143
Test Plan: unit tests added / updated, added to stress/crash test
Reviewed By: ajkr
Differential Revision: D42848627
Pulled By: pdillinger
fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4
Summary:
Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller.
Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105
Test Plan:
make V=1 db_blob_basic_test
./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*"
Reviewed By: ltamasi
Differential Revision: D42716487
Pulled By: jowlyzhang
fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
Hui Xiao