Summary:
This patch factors out the logic that reads a (potentially compressed) blob
from a file into a separate helper method `GetRawBlobFromFile`, and cleans
up the code a bit. Also, errors during decompression are now logged/propagated
to the user by returning a `Status` code of `Corruption`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6093
Test Plan: `make check`
Differential Revision: D18716673
Pulled By: ltamasi
fbshipit-source-id: 44144bc064cab616862d5643f34384f2bae6eb78
Summary:
The patch refactors and cleans up the logic around creating new blob files
by moving the common code of `SelectBlobFile` and `SelectBlobFileTTL`
to a new helper method `CreateBlobFileAndWriter`, bringing the implementation
of `SelectBlobFile` and `SelectBlobFileTTL` into sync, and increasing encapsulation
by adding new constructors for `BlobFile` and `BlobLogHeader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6066
Test Plan:
Ran `make check` and used the BlobDB mode of `db_bench` to sanity test both
the TTL and the non-TTL code paths.
Differential Revision: D18646921
Pulled By: ltamasi
fbshipit-source-id: e5705a84807932e31dccab4f49b3e64369cea26d
Summary:
The patch adds logic to mark no longer needed blob files obsolete upon database open
and whenever a flush or compaction completes. Unneeded blob files are detected by
iterating through live immutable non-TTL blob files starting from the lowest-numbered one,
and stopping when a blob file used by any SSTs or potentially used by memtables is found.
(The latter is determined by comparing the sequence number at which the blob file
became immutable with the largest sequence number received in flush notifications.)
In addition, the patch cleans up the logic around closing and obsoleting blob files and
enforces invariants around this area (blob files are now guaranteed to go through the
stages mutable-non-obsolete, immutable-non-obsolete, and immutable-obsolete in this
order).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6032
Test Plan: Extended unit tests and tested using the BlobDB mode of `db_bench`.
Differential Revision: D18495610
Pulled By: ltamasi
fbshipit-source-id: 11825b84af74f3f4abfd9bcae04e80870ae58961
Summary:
The patch adds logic to BlobDB to maintain the mapping between blob files
and SSTs for which the blob file in question is the oldest blob file referenced
by the SST file. The mapping is initialized during database open based on the
information retrieved using `GetLiveFilesMetaData`, and updated after
flushes/compactions based on the information received through the `EventListener`
interface (or, in the case of manual compactions issued through the `CompactFiles`
API, the `CompactionJobInfo` object).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6020
Test Plan: Added a unit test; also tested using the BlobDB mode of `db_bench`.
Differential Revision: D18410508
Pulled By: ltamasi
fbshipit-source-id: dd9e778af781cfdb0d7056298c54ba9cebdd54a5
Summary:
Right now, BlobDB::Open() fails to put all trash files to delete scheduler,
which causes some trash files permanently untracked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5103
Differential Revision: D14606095
Pulled By: siying
fbshipit-source-id: 41a9437a2948abb235c0ed85f9a04612d0e50183
Summary:
Remove unused blob WAL filter so that users are not confused.
I was initially under the impression that we have WAL Filter support in BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4896
Differential Revision: D13725709
Pulled By: sagar0
fbshipit-source-id: f997d7546e138a474036e88b957907cc714327f1
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
A fix similar to #4410 but on the write path. On IO error on `SelectBlobFile()` we didn't return error code properly, but simply a nullptr of `BlobFile`. The `AppendBlob()` method didn't have null check for the pointer and caused crash. The fix make sure we properly return error code in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4580
Differential Revision: D10513849
Pulled By: yiwu-arbug
fbshipit-source-id: 80bca920d1d7a3541149de981015ad83e0aa14b5
Summary:
Fix IO error on read not being handle and crashing the DB. With the fix we properly return the error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4410
Differential Revision: D9979246
Pulled By: yiwu-arbug
fbshipit-source-id: 111a85675067a29c03cb60e9a34103f4ff636694
Summary:
`DB::DiableFileDeletions` and `DB::EnableFileDeletions` are used for applications to stop RocksDB background jobs to delete files while they are doing replication. Implement these methods for BlobDB. `DeleteObsolteFiles` now needs to check `disable_file_deletions_` before starting, and will hold `delete_file_mutex_` the whole time while it is running. `DisableFileDeletions` needs to wait on `delete_file_mutex_` for running `DeleteObsolteFiles` job and set `disable_file_deletions_` flag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4314
Differential Revision: D9501373
Pulled By: yiwu-arbug
fbshipit-source-id: 81064c1228f1724eff46da22b50ff765b16292cd
Summary:
Fix expired file not being evicted from the DB. We have a background task (previously called `CheckSeqFiles` and I rename it to `EvictExpiredFiles`) to scan and remove expired files, but it only close the files, not marking them as expired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4294
Differential Revision: D9415984
Pulled By: yiwu-arbug
fbshipit-source-id: eff7bf0331c52a7ccdb02318602bff7f64f3ef3d
Summary:
Add API to allow fetching expiration of a key with `Get()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4227
Differential Revision: D9169897
Pulled By: yiwu-arbug
fbshipit-source-id: 2a6f216c493dc75731ddcef1daa689b517fab31b
Summary:
Cleanup TTLExtractor interface. The original purpose of it is to allow our users keep using existing `Write()` interface but allow it to accept TTL via `TTLExtractor`. However the interface is confusing. Will replace it with something like `WriteWithTTL(batch, ttl)` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4229
Differential Revision: D9174390
Pulled By: yiwu-arbug
fbshipit-source-id: 68201703d784408b851336ab4dd9b84188245b2d
Summary:
Previously with is_fifo=true we only evict TTL file. Changing it to also evict non-TTL files from oldest to newest, after exhausted TTL files.
Closes https://github.com/facebook/rocksdb/pull/4049
Differential Revision: D8604597
Pulled By: yiwu-arbug
fbshipit-source-id: bc4209ee27c1528ce4b72833e6f1e1bff80082c1
Summary:
Improving blob db FIFO eviction with the following changes,
* Change blob_dir_size to max_db_size. Take into account SST file size when computing DB size.
* FIFO now only take into account live sst files and live blob files. It is normal for disk usage to go over max_db_size because there are obsolete sst files and blob files pending deletion.
* FIFO eviction now also evict TTL blob files that's still open. It doesn't evict non-TTL blob files.
* If FIFO is triggered, it will pass an expiration and the current sequence number to compaction filter. Compaction filter will then filter inlined keys to evict those with an earlier expiration and smaller sequence number. So call LSM FIFO.
* Compaction filter also filter those blob indexes where corresponding blob file is gone.
* Add an event listener to listen compaction/flush event and update sst file size.
* Implement DB::Close() to make sure base db, as well as event listener and compaction filter, destruct before blob db.
* More blob db statistics around FIFO.
* Fix some locking issue when accessing a blob file.
Closes https://github.com/facebook/rocksdb/pull/3556
Differential Revision: D7139328
Pulled By: yiwu-arbug
fbshipit-source-id: ea5edb07b33dfceacb2682f4789bea61de28bbfa
Summary:
Red diff to remove existing implementation of garbage collection. The current approach is reference counting kind of approach and require a lot of effort to get the size counter right on compaction and deletion. I'm going to go with a simple mark-sweep kind of approach and will send another PR for that.
CompactionEventListener was added solely for blob db and it adds complexity and overhead to compaction iterator. Removing it as well.
Closes https://github.com/facebook/rocksdb/pull/3551
Differential Revision: D7130190
Pulled By: yiwu-arbug
fbshipit-source-id: c3a375ad2639a3f6ed179df6eda602372cc5b8df
Summary:
Previously, if blob_db_options.bytes_per_sync, there is a background job to call fsync() for every bytes_per_sync bytes written to a blob file. With the change we simply pass bytes_per_sync as env_options_ to blob files so that sync_file_range() will be used instead.
Closes https://github.com/facebook/rocksdb/pull/3297
Differential Revision: D6606994
Pulled By: yiwu-arbug
fbshipit-source-id: 452424be52e32ba92f5ea603b564e9b88929af47
Summary:
Previously we store sequence number range of each blob files, and use the sequence number range to check if the file can be possibly visible by a snapshot. But it adds complexity to the code, since the sequence number is only available after a write. (The current implementation get sequence number by calling GetLatestSequenceNumber(), which is wrong.) With the patch, we are not storing sequence number range, and check if snapshot_sequence < obsolete_sequence to decide if the file is visible by a snapshot (previously we check if first_sequence <= snapshot_sequence < obsolete_sequence).
Closes https://github.com/facebook/rocksdb/pull/3274
Differential Revision: D6571497
Pulled By: yiwu-arbug
fbshipit-source-id: ca06479dc1fcd8782f6525b62b7762cd47d61909
Summary:
Refactor BlobDB open logic. List of changes:
Major:
* On reopen, mark blob files found as immutable, do not use them for writing new keys.
* Not to scan the whole file to find file footer. Instead just seek to the end of the file and try to read footer.
Minor:
* Move most of the real logic from blob_db.cc to blob_db_impl.cc.
* Not to hold shared_ptr of event listeners in global maps in blob_db.cc
* Some changes to BlobFile interface.
* Improve logging and error handling.
Closes https://github.com/facebook/rocksdb/pull/3246
Differential Revision: D6526147
Pulled By: yiwu-arbug
fbshipit-source-id: 9dc4cdd63359a2f9b696af817086949da8d06952
Summary:
Adding a list of blob db counters.
Also remove WaStats() which doesn't expose the stats and can be substitute by (BLOB_DB_BYTES_WRITTEN / BLOB_DB_BLOB_FILE_BYTES_WRITTEN).
Closes https://github.com/facebook/rocksdb/pull/3193
Differential Revision: D6394216
Pulled By: yiwu-arbug
fbshipit-source-id: 017508c8ff3fcd7ea7403c64d0f9834b24816803
Summary:
Blob db will keep blob file if data in the file is visible to an active snapshot. Before this patch it checks whether there is an active snapshot has sequence number greater than the earliest sequence in the file. This is problematic since we take snapshot on every read, if it keep having reads, old blob files will not be cleanup. Change to check if there is an active snapshot falls in the range of [earliest_sequence, obsolete_sequence) where obsolete sequence is
1. if data is relocated to another file by garbage collection, it is the latest sequence at the time garbage collection finish
2. otherwise, it is the latest sequence of the file
Closes https://github.com/facebook/rocksdb/pull/3087
Differential Revision: D6182519
Pulled By: yiwu-arbug
fbshipit-source-id: cdf4c35281f782eb2a9ad6a87b6727bbdff27a45
Summary:
Evict oldest blob file and put it in obsolete_files list when close to blob db size limit. The file will be delete when the `DeleteObsoleteFiles` background job runs next time.
For now I set `kEvictOldestFileAtSize` constant, which controls when to evict the oldest file, at 90%. It could be tweaked or made into an option if really needed; I didn't want to expose it as an option pre-maturely as there are already too many :) .
Closes https://github.com/facebook/rocksdb/pull/3094
Differential Revision: D6187340
Pulled By: sagar0
fbshipit-source-id: 687f8262101b9301bf964b94025a2fe9d8573421
Summary:
* cleanup num_concurrent_simple_blobs. We don't do concurrent writes (by taking write_mutex_) so it doesn't make sense to have multiple non TTL files open. We can revisit later when we want to improve writes.
* cleanup eviction callback. we don't have plan to use it now.
* rename s/open_simple_blob_files_/open_non_ttl_file_/ and s/open_blob_files_/open_ttl_files_/ to avoid confusion.
Closes https://github.com/facebook/rocksdb/pull/3088
Differential Revision: D6182598
Pulled By: yiwu-arbug
fbshipit-source-id: 99e6f5e01fa66d31309cdb06ce48502464bac6ad
Summary:
Adding the `min_blob_size` option to allow storing small values in base db (in LSM tree) together with the key. The goal is to improve performance for small values, while taking advantage of blob db's low write amplification for large values.
Also adding expiration timestamp to blob index. It will be useful to evict stale blob indexes in base db by adding a compaction filter. I'll work on the compaction filter in future patches.
See blob_index.h for the new blob index format. There are 4 cases when writing a new key:
* small value w/o TTL: put in base db as normal value (i.e. ValueType::kTypeValue)
* small value w/ TTL: put (type, expiration, value) to base db.
* large value w/o TTL: write value to blob log and put (type, file, offset, size, compression) to base db.
* large value w/TTL: write value to blob log and put (type, expiration, file, offset, size, compression) to base db.
Closes https://github.com/facebook/rocksdb/pull/3066
Differential Revision: D6142115
Pulled By: yiwu-arbug
fbshipit-source-id: 9526e76e19f0839310a3f5f2a43772a4ad182cd0
Summary:
Blob db insert blob index to base db as kTypeBlobIndex type, to tell apart values written by plain rocksdb or blob db. This is to make it possible to migrate from existing rocksdb to blob db.
Also with the patch blob db garbage collection get away from OptimisticTransaction. Instead it use a custom write callback to achieve similar behavior as OptimisticTransaction. This is because we need to pass the is_blob_index flag to DBImpl::Get but OptimisticTransaction don't support it.
Closes https://github.com/facebook/rocksdb/pull/3000
Differential Revision: D6050044
Pulled By: yiwu-arbug
fbshipit-source-id: 61dc72ab9977625e75f78cd968e7d8a3976e3632
Summary:
Previously each time we write a blob we write blog_record_header + key + value + blob_record_footer to blob log. The footer only contains a sequence and a crc for the sequence number. The sequence number was used in garbage collection to verify the value is recent. After #2703 we moved to use optimistic transaction and no longer use sequence number from the footer. Remove the footer altogether.
There's another usage of sequence number and we are keeping it: Each blob log file keep track of sequence number range of keys in it, and use it to check if it is reference by a snapshot, before being deleted.
Closes https://github.com/facebook/rocksdb/pull/3005
Differential Revision: D6057585
Pulled By: yiwu-arbug
fbshipit-source-id: d6da53c457a316e9723f359a1b47facfc3ffe090
Summary:
Fixing flaky blob_db_test.
To close a blob file, blob db used to add a CloseSeqWrite job to the background thread to close it. Changing file close to be synchronous in order to simplify logic, and fix flaky blob_db_test.
Closes https://github.com/facebook/rocksdb/pull/2787
Differential Revision: D5699387
Pulled By: yiwu-arbug
fbshipit-source-id: dd07a945cd435cd3808fce7ee4ea57817409474a
Summary:
If GC kicks in between
* A Get() reads index entry from base db.
* The Get() read from a blob file
The GC can delete the corresponding blob file, making the key not found. Fortunately we have existing logic to avoid deleting a blob file if it is referenced by a snapshot. So the fix is to explicitly create a snapshot before reading index entry from base db.
Closes https://github.com/facebook/rocksdb/pull/2754
Differential Revision: D5655956
Pulled By: yiwu-arbug
fbshipit-source-id: e4ccbc51331362542e7343175bbcbdea5830f544
Summary:
When out of space, blob db should GC the oldest file. The current implementation GC the newest one instead. Fixing it.
Closes https://github.com/facebook/rocksdb/pull/2757
Differential Revision: D5657611
Pulled By: yiwu-arbug
fbshipit-source-id: 56c30a4c52e6ab04551dda8c5c46006d4070b28d
Summary:
While GC, blob DB use optimistic transaction to delete or replace the index entry in LSM, to guarantee correctness if there's a normal write writing to the same key. However, the previous implementation doesn't call SetSnapshot() nor use GetForUpdate() of transaction API, instead it do its own sequence number checking before beginning the transaction. A normal write can sneak in after the sequence number check and overwrite the key, and the GC will delete or relocate the old version of the key by mistake. Update the code to property use GetForUpdate() to check the existing index entry.
After the patch the sequence number store with each blob record is useless, So I'm considering remove the sequence number from blob record, in another patch.
Closes https://github.com/facebook/rocksdb/pull/2703
Differential Revision: D5589178
Pulled By: yiwu-arbug
fbshipit-source-id: 8dc960cd5f4e61b36024ba7c32d05584ce149c24
Summary:
The current blob db implementation use mix of int32_t, uint32_t and uint64_t for TTL and expiration. Update all timestamps to uint64_t for consistency.
Closes https://github.com/facebook/rocksdb/pull/2683
Differential Revision: D5557103
Pulled By: yiwu-arbug
fbshipit-source-id: e4eab2691629a755e614e8cf1eed9c3a681d0c42
Summary:
I'm going with brute-force solution, just letting Put() and Write() holding a mutex before writing. May improve concurrent writing with finer granularity locking later.
Closes https://github.com/facebook/rocksdb/pull/2682
Differential Revision: D5552690
Pulled By: yiwu-arbug
fbshipit-source-id: 039abd675b5d274a7af6428198d1733cafecef4c
Summary:
* Dump blob db options to info log
* Remove BlobDBOptionsImpl to disallow dynamic cast *BlobDBOptions into *BlobDBOptionsImpl. Move options there to be constants or into BlobDBOptions. The dynamic cast is broken after #2645
* Change some of the default options
* Remove blob_db_options.min_blob_size, which is unimplemented. Will implement it soon.
Closes https://github.com/facebook/rocksdb/pull/2671
Differential Revision: D5529912
Pulled By: yiwu-arbug
fbshipit-source-id: dcd58ca981db5bcc7f123b65a0d6f6ae0dc703c7
Summary:
Introducing blob_db::TTLExtractor to replace extract_ttl_fn. The TTL
extractor can be use to extract TTL from keys insert with Put or
WriteBatch. Change over existing extract_ttl_fn are:
* If value is changed, it will be return via std::string* (rather than Slice*). With Slice* the new value has to be part of the existing value. With std::string* the limitation is removed.
* It can optionally return TTL or expiration.
Other changes in this PR:
* replace `std::chrono::system_clock` with `Env::NowMicros` so that I can mock time in tests.
* add several TTL tests.
* other minor naming change.
Closes https://github.com/facebook/rocksdb/pull/2659
Differential Revision: D5512627
Pulled By: yiwu-arbug
fbshipit-source-id: 0dfcb00d74d060b8534c6130c808e4d5d0a54440
Summary:
Blob db use StackableDB::get which only get out the
value offset, but not the value.
Fix by making BlobDB::Get override the designated getter.
Closes https://github.com/facebook/rocksdb/pull/2553
Differential Revision: D5396823
Pulled By: yiwu-arbug
fbshipit-source-id: 5a7d1cf77ee44490f836a6537225955382296878
Summary:
`CompressBlock()` will return the uncompressed slice (i.e. `Slice(value_unc)`) if compression ratio is not good enough. This is undesired. We need to always assign the compressed slice to `value`.
Closes https://github.com/facebook/rocksdb/pull/2447
Differential Revision: D5244682
Pulled By: yiwu-arbug
fbshipit-source-id: 6989dd8852c9622822ba9acec9beea02007dff09
Summary:
I'm trying to improve unit test of blob db. I'm rewriting blob db test. In this patch:
* Rewrite tests of basic put/write/delete operations.
* Add disable_background_tasks to BlobDBOptionsImpl to allow me not running any background job for basic unit tests.
* Move DestroyBlobDB out from BlobDBImpl to be a standalone function.
* Remove all garbage collection related tests. Will rewrite them in following patch.
* Disabled compression test since it is failing. Will fix in a followup patch.
Closes https://github.com/facebook/rocksdb/pull/2446
Differential Revision: D5243306
Pulled By: yiwu-arbug
fbshipit-source-id: 157c71ad3b699307cb88baa3830e9b6e74f8e939
Summary:
Blob db rely on base db returning sequence number through write batch after DB::Write(). However after recent changes to the write path, DB::Writ()e no longer return sequence number in some cases. Fixing it by have WriteBatchInternal::InsertInto() always encode sequence number into write batch.
Stacking on #2375.
Closes https://github.com/facebook/rocksdb/pull/2385
Differential Revision: D5148358
Pulled By: yiwu-arbug
fbshipit-source-id: 8bda0aa07b9334ed03ed381548b39d167dc20c33
Levi Tamasi