Summary:
* make `checksum_type_string_map` available for lite
* comment out `FilesPerLevel` in lite mode.
* travis and legocastle lite build also build `all` target and run tests
Closes https://github.com/facebook/rocksdb/pull/3015
Differential Revision: D6069822
Pulled By: yiwu-arbug
fbshipit-source-id: 9fe92ac220e711e9e6ed4e921bd25ef4314796a0
Summary:
The referencing logic is super confusing so added a comment at the part that took me longest to figure out.
Closes https://github.com/facebook/rocksdb/pull/2996
Differential Revision: D6034969
Pulled By: ajkr
fbshipit-source-id: 9cc2e744c1f79d6d57d378f86ed59238a5f583db
Summary:
Right now in `PutCFImpl` we always increment NUMBER_KEYS_UPDATED counter for both in-place update or insertion. This PR fixes this by using the correct counter for either case.
Closes https://github.com/facebook/rocksdb/pull/2986
Differential Revision: D6016300
Pulled By: miasantreble
fbshipit-source-id: 0aed327522e659450d533d1c47d3a9f568fac65d
Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.
- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988
Differential Revision: D6018083
Pulled By: ajkr
fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
Summary:
Hi,
As part of some optimization, we're using multiple DB locations (tmpfs and spindle) to store data and configured max_bytes_for_level_multiplier_additional. But, max_bytes_for_level_multiplier_additional is not used to compute the actual size for the level while picking the DB location. So, even if DB location does not have space, RocksDB mistakenly puts the level at that location.
Can someone pls. verify the fix? Let me know any other changes required.
Thanks,
Jay
Closes https://github.com/facebook/rocksdb/pull/2704
Differential Revision: D5992515
Pulled By: ajkr
fbshipit-source-id: cbbc6c0e0a7dbdca91c72e0f37b218c4cec57e28
Summary:
On iterator create, take a snapshot, create a ReadCallback and pass the ReadCallback to the underlying DBIter to check if key is committed.
Closes https://github.com/facebook/rocksdb/pull/2981
Differential Revision: D6001471
Pulled By: yiwu-arbug
fbshipit-source-id: 3565c4cdaf25370ba47008b0e0cb65b31dfe79fe
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
Add a new function in Listener to let the caller know when rocksdb
is stalling writes.
Closes https://github.com/facebook/rocksdb/pull/2897
Differential Revision: D5860124
Pulled By: schischi
fbshipit-source-id: ee791606169aa64f772c86f817cebf02624e05e1
Summary:
We need to tell the iterator the compaction output file's level so it can apply proper optimizations, like pinning filter and index blocks when user enables `pin_l0_filter_and_index_blocks_in_cache` and the output file's level is zero.
Closes https://github.com/facebook/rocksdb/pull/2949
Differential Revision: D5945597
Pulled By: ajkr
fbshipit-source-id: 2389decf9026ffaa32d45801a77d002529f64a62
Summary:
Also made the test more easier to understand:
- changed the value size to ~1MB.
- switched to NoCompression. We don't anyway need compression in this test for dynamic options.
The test failures started happening starting from: #2893 .
Closes https://github.com/facebook/rocksdb/pull/2957
Differential Revision: D5959392
Pulled By: sagar0
fbshipit-source-id: 2d55641e429246328bc6d10fcb9ef540d6ce07da
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
There's no point populating the block cache during this read. The key we read is guaranteed to be overwritten with a new `kValueType` key immediately afterwards, so can't be accessed again. A user was seeing high turnover of data blocks, at least partially due to this.
Closes https://github.com/facebook/rocksdb/pull/2959
Differential Revision: D5961672
Pulled By: ajkr
fbshipit-source-id: e7cb27c156c5db3b32af355c780efb99dbdf087c
Summary:
PR 2893 introduced a variable that is only used in TEST_SYNC_POINT_CALLBACK. When RocksDB is not built in debug mode, this method is not compiled in, and the variable is unused, which triggers a compiler error.
This patch reverts the corresponding part of #2893.
Closes https://github.com/facebook/rocksdb/pull/2956
Reviewed By: yiwu-arbug
Differential Revision: D5955679
Pulled By: asandryh
fbshipit-source-id: ac4a8e85b22da7f02efb117cd2e4a6e07ba73390
Summary:
It was broken when `NotifyCollectTableCollectorsOnFinish` was introduced. That function called `Finish` on each of the `TablePropertiesCollector`s, and `CompactOnDeletionCollector::Finish()` was resetting all its internal state. Then, when we checked whether compaction is necessary, the flag had already been cleared.
Fixed above issue by avoiding resetting internal state during `Finish()`. Multiple calls to `Finish()` are allowed, but callers cannot invoke `AddUserKey()` on the collector after any finishes.
Closes https://github.com/facebook/rocksdb/pull/2936
Differential Revision: D5918659
Pulled By: ajkr
fbshipit-source-id: 4f05e9d80e50ee762ba1e611d8d22620029dca6b
Summary:
Recover txns from the WAL. Also added some unit tests.
Closes https://github.com/facebook/rocksdb/pull/2901
Differential Revision: D5859596
Pulled By: maysamyabandeh
fbshipit-source-id: 6424967b231388093b4effffe0a3b1b7ec8caeb0
Summary:
For every merge operand encountered for a key in the read path we now have the ability to decide whether to look further (to retrieve more merge operands for the key) or stop and invoke the merge operator to return the value. The user needs to override `ShouldMerge()` method with a condition to terminate search when true to avail this facility.
This has a couple of advantages:
1. It helps in limiting the number of merge operands that are looked at to compute a value as part of a user Get operation.
2. It allows to peek at a merge key-value to see if further merge operands need to look at.
Example: Limiting the number of merge operands that are looked at: Lets say you have 10 merge operands for a key spread over various levels. If you only want RocksDB to look at the latest two merge operands instead of all 10 to compute the value, it is now possible with this PR. You can set the condition in `ShouldMerge()` to return true when the size of the operand list is 2. Look at the example implementation in the unit test. Without this PR, a Get might look at all the 10 merge operands in different levels before invoking the merge-operator.
Added a new unit test.
Made sure that there is no perf regression by running benchmarks.
Command line to Load data:
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="mergerandom" --merge_operator="uint64add" --num=10000000
...
mergerandom : 12.861 micros/op 77757 ops/sec; 8.6 MB/s ( updates:10000000)
```
**ReadRandomMergeRandom bechmark results:**
Command line:
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="readrandommergerandom" --merge_operator="uint64add" --num=10000000
```
Base -- Without this code change (on commit fc7476b):
```
readrandommergerandom : 38.586 micros/op 25916 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8)
```
With this code change:
```
readrandommergerandom : 38.653 micros/op 25870 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8)
```
Closes https://github.com/facebook/rocksdb/pull/2923
Differential Revision: D5898239
Pulled By: sagar0
fbshipit-source-id: daefa325019f77968639a75c851d46352c2303ef
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
Context/problem:
- CFs may be flushed at different times
- A WAL can only be deleted after all CFs have flushed beyond end of that WAL.
- Point-in-time recovery might stop upon reaching the first corruption.
- Some CFs may have already flushed beyond that point, while others haven't. We should fail the Open() instead of proceeding with inconsistent CFs.
Closes https://github.com/facebook/rocksdb/pull/2900
Differential Revision: D5863281
Pulled By: miasantreble
fbshipit-source-id: 180dbaf83d96c804cff49b3c406312a4ae61313e
Summary:
Problem:
- `DB::SanitizeOptions` strips trailing slash from `wal_dir` but not `dbname`
- We check whether `wal_dir` and `dbname` refer to the same directory using string equality: https://github.com/facebook/rocksdb/blob/master/db/repair.cc#L258
- Providing `dbname` with trailing slash causes default `wal_dir` to be misidentified as a separate directory.
- Then the repair tries to add all SST files to the `VersionEdit` twice (once for `dbname` dir, once for `wal_dir`) and fails with coredump.
Solution:
- Add a new `Env` function, `AreFilesSame`, which uses device and inode number to check whether files are the same. It's currently only implemented in `PosixEnv`.
- Migrate repair to use `AreFilesSame` to check whether `dbname` and `wal_dir` are same. If unsupported, falls back to string comparison.
Closes https://github.com/facebook/rocksdb/pull/2827
Differential Revision: D5761349
Pulled By: ajkr
fbshipit-source-id: c839d548678b742af1166d60b09abd94e5476238
Summary:
Fix for [2461](https://github.com/facebook/rocksdb/issues/2461).
Problem: When using multiple db_paths setting with RocksDB, RocksDB incorrectly calculates the size of L1 in LevelCompactionBuilder::GetPathId.
max_bytes_for_level_base is used as L0 size and L1 size is calculated as (L0 size * max_bytes_for_level_multiplier). However, L1 size should be max_bytes_for_level_base.
Solution: Use max_bytes_for_level_base as L1 size. Also, use L1 size as the estimated size of L0.
Closes https://github.com/facebook/rocksdb/pull/2903
Differential Revision: D5885442
Pulled By: maysamyabandeh
fbshipit-source-id: 036da1c9298d173b9b80479cc6661ee4b7a951f6
Summary:
This is caught when I was testing #2886.
Closes https://github.com/facebook/rocksdb/pull/2907
Differential Revision: D5863153
Pulled By: yiwu-arbug
fbshipit-source-id: 8c54759ba1a0dc101f24ab50423e35731300612d
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.
Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885
Differential Revision: D5837843
Pulled By: maysamyabandeh
fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
Summary:
Our current implementation of (semi-)copy constructor of DBOptions and ColumnFamilyOptions seems to intend value by value copy, which is what the default copy constructor does anyway. Moreover not using the default constructor has the risk of forgetting to add newly added options.
As an example, allow_2pc seems to be forgotten in the copy constructor which was causing one of the unit tests not seeing its effect.
Closes https://github.com/facebook/rocksdb/pull/2888
Differential Revision: D5846368
Pulled By: maysamyabandeh
fbshipit-source-id: 1ee92a2aeae93886754b7bc039c3411ea2458683
Summary:
Three small optimizations:
(1) iter_->IsKeyPinned() shouldn't be called if read_options.pin_data is not true. This may trigger function call all the way down the iterator tree.
(2) reuse the iterator key object in DBIter::FindNextUserEntryInternal(). The constructor of the class has some overheads.
(3) Move the switching direction logic in MergingIterator::Next() to a separate function.
These three in total improves readseq performance by about 3% in my benchmark setting.
Closes https://github.com/facebook/rocksdb/pull/2880
Differential Revision: D5829252
Pulled By: siying
fbshipit-source-id: 991aea10c6d6c3b43769cb4db168db62954ad1e3
Summary:
Move uncommon code paths in RangeDelAggregator::ShouldDelete() and IterKey::EnlargeBufferIfNeeded() to a separate function, so that the inlined strcuture can be more optimized.
Optimize it because these places show up in CPU profiling, though minimum. The performance is really hard measure. I ran db_bench with readseq benchmark against in-memory DB many times. The variation is big, but it seems to show 1% improvements.
Closes https://github.com/facebook/rocksdb/pull/2877
Differential Revision: D5828123
Pulled By: siying
fbshipit-source-id: 41a49e229f91e9f8409f85cc6f0dc70e31334e4b
Summary:
Added possibility to set save points in transactions and then rollback to them
Closes https://github.com/facebook/rocksdb/pull/2876
Differential Revision: D5825829
Pulled By: yiwu-arbug
fbshipit-source-id: 62168992340bbcddecdaea3baa2a678475d1429d
Summary:
Bug report: https://www.facebook.com/groups/rocksdb.dev/permalink/1389452781153232/
Non-empty `level0_compactions_in_progress_` was aborting `CompactFiles` after incrementing `bg_compaction_scheduled_`, and in that case we never decremented it. This blocked future compactions and prevented DB close as we wait for scheduled compactions to finish/abort during close.
I eliminated `CompactFiles`'s dependency on `level0_compactions_in_progress_`. Since it takes a contiguous span of L0 files -- through the last L0 file if any L1+ files are included -- it's fine to run in parallel with other compactions involving L0. We make the same assumption in intra-L0 compaction.
Closes https://github.com/facebook/rocksdb/pull/2849
Differential Revision: D5780440
Pulled By: ajkr
fbshipit-source-id: 15b15d3faf5a699aed4b82a58352d4a7bb23e027
Summary:
Added some bindings for `OptimisticTransactionDB` in C API
Closes https://github.com/facebook/rocksdb/pull/2823
Differential Revision: D5820672
Pulled By: yiwu-arbug
fbshipit-source-id: 7efd17f619cc0741feddd2050b8fc856f9288350
Summary:
- Switched all instances of SetMinPossibleForUserKey and SetMaxPossibleForUserKey in accordance to InternalKeyComparator's comparison logic
Closes https://github.com/facebook/rocksdb/pull/2868
Differential Revision: D5804152
Pulled By: axxufb
fbshipit-source-id: 80be35e04f2e8abc35cc64abe1fecb03af24e183
Summary:
options.enable_pipelined_write and options.concurrent_prepare are incompatible and should not be set together.
Closes https://github.com/facebook/rocksdb/pull/2875
Differential Revision: D5818358
Pulled By: maysamyabandeh
fbshipit-source-id: dad862508f00817ab302f8b61729accf38315fb8
Summary:
Changes:
* added check for value before merge is called on code path that should check if key exists
Closes https://github.com/facebook/rocksdb/pull/2814
Reviewed By: IslamAbdelRahman
Differential Revision: D5743966
Pulled By: armishra
fbshipit-source-id: 6ac4283bc510c8ca50827d87ef0ba631f2b33b18
Summary:
it sometimes takes more than 10 minutes (i.e., times out) on our internal CI. mainly because bzip is super slow. so I reduced the amount of work it tries to do.
Closes https://github.com/facebook/rocksdb/pull/2856
Differential Revision: D5795883
Pulled By: ajkr
fbshipit-source-id: e69f986ae60b44ecc26b6b024abd0f13bdf3a3c5
Summary:
Merging iterator invokes InternalKeyComparator.Compare() frequently to heap merge. By making InternalKeyComparator final and merging iterator to directly use InternalKeyComparator rather than through Iterator interface, we can give compiler a choice to avoid one more virtual function call if possible. I ran readseq benchmark in memory-only use case to make sure the performance at least doesn't regress.
I have to disable the final key word in debug build, as a hack test class depends on overriding the class.
Closes https://github.com/facebook/rocksdb/pull/2860
Differential Revision: D5800461
Pulled By: siying
fbshipit-source-id: ab876f22a09bb5c560740911412336e0e25ccb53
Summary:
DBIter is referenced in ArenaWrappedDBIter, which is a simple wrapper. If DBIter is final, some virtual function call can be avoided. Some functions can even be inlined, like DBIter.value() to ArenaWrappedDBIter.value() and DBIter.key() to ArenaWrappedDBIter.key(). The performance gain is hard to measure. I just ran the memory-only benchmark for readseq and saw it didn't regress. There shouldn't be any harm doing it. Just give compiler more choices.
Closes https://github.com/facebook/rocksdb/pull/2859
Differential Revision: D5799888
Pulled By: siying
fbshipit-source-id: 829788f91310c40282dcfb7e412e6ef489931143
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850
Differential Revision: D5787375
Pulled By: maysamyabandeh
fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
Summary:
Some of these names, like `MEMTABLE_COMPACTION`, did not mean anything. Tried to give them descriptive names.
Closes https://github.com/facebook/rocksdb/pull/2852
Differential Revision: D5782822
Pulled By: ajkr
fbshipit-source-id: f2695c4124af4073da4492d7135bae2411220f3a
Summary:
if we're moving any L0 files down, we need to include older L0 files since they may contain older versions of the keys being moved down.
Closes https://github.com/facebook/rocksdb/pull/2845
Differential Revision: D5773800
Pulled By: ajkr
fbshipit-source-id: 9f0770a8eaaeea4c87df2e7a2a1d65bf9d7f4f7e
Summary:
This branch extends existing property map which keeps values in doubles to keep values in strings so that it can be used to provide wider range of properties. The immediate need for that is to provide IO stall stats in an easy parseable way to MyRocks which is also part of this branch.
Closes https://github.com/facebook/rocksdb/pull/2794
Differential Revision: D5717676
Pulled By: Tema
fbshipit-source-id: e34ba5b79ba774697f7b97ce1138d8fd55471b8a
Nikhil Benesch