Summary:
If WAL compression is enabled, WAL fragment decompression results are concatenated together in `log::Reader::ReadPhysicalRecord()`. This PR adds checksum handshake to protect memory corruption during the copying process.
`checksum` is renamed to `record_checksum` in `ReadRecord()` to differentiate it from `checksum_` flag that specifies whether CRC32C checksum is verified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10339
Test Plan: added checksum verification in log_test.cc, `make check -j32`.
Reviewed By: ajkr
Differential Revision: D37763734
Pulled By: cbi42
fbshipit-source-id: c4faa7c76b9ff1df35026edf31adfe4b47ae3154
Summary:
Added rate limiter and read rate-limiting support to SequentialFileReader. I've updated call sites to SequentialFileReader::Read with appropriate IO priority (or left a TODO and specified IO_TOTAL for now).
The PR is separated into four commits: the first one added the rate-limiting support, but with some fixes in the unit test since the number of request bytes from rate limiter in SequentialFileReader are not accurate (there is overcharge at EOF). The second commit fixed this by allowing SequentialFileReader to check file size and determine how many bytes are left in the file to read. The third commit added benchmark related code. The fourth commit moved the logic of using file size to avoid overcharging the rate limiter into backup engine (the main user of SequentialFileReader).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9973
Test Plan:
- `make check`, backup_engine_test covers usage of SequentialFileReader with rate limiter.
- Run db_bench to check if rate limiting is throttling as expected: Verified that reads and writes are together throttled at 2MB/s, and at 0.2MB chunks that are 100ms apart.
- Set up: `./db_bench --benchmarks=fillrandom -db=/dev/shm/test_rocksdb`
- Benchmark:
```
strace -ttfe read,write ./db_bench --benchmarks=backup -db=/dev/shm/test_rocksdb --backup_rate_limit=2097152 --use_existing_db
strace -ttfe read,write ./db_bench --benchmarks=restore -db=/dev/shm/test_rocksdb --restore_rate_limit=2097152 --use_existing_db
```
- db bench on backup and restore to ensure no performance regression.
- backup (avg over 50 runs): pre-change: 1.90443e+06 micros/op; post-change: 1.8993e+06 micros/op (improve by 0.2%)
- restore (avg over 50 runs): pre-change: 1.79105e+06 micros/op; post-change: 1.78192e+06 micros/op (improve by 0.5%)
```
# Set up
./db_bench --benchmarks=fillrandom -db=/tmp/test_rocksdb -num=10000000
# benchmark
TEST_TMPDIR=/tmp/test_rocksdb
NUM_RUN=50
for ((j=0;j<$NUM_RUN;j++))
do
./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=backup -use_existing_db | egrep 'backup'
# Restore
#./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=restore -use_existing_db
done > rate_limit.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' rate_limit.txt >> rate_limit_2.txt
```
Reviewed By: hx235
Differential Revision: D36327418
Pulled By: cbi42
fbshipit-source-id: e75d4307cff815945482df5ba630c1e88d064691
Summary:
Integrate the streaming compress/uncompress API into WAL compression.
The streaming compression object is stored in the log_writer along with a reusable output buffer to store the compressed buffer(s).
The streaming uncompress object is stored in the log_reader along with a reusable output buffer to store the uncompressed buffer(s).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9642
Test Plan:
Added unit tests to verify different scenarios - large buffers, split compressed buffers, etc.
Future optimizations:
The overhead for small records is quite high, so it makes sense to compress only buffers above a certain threshold and use a separate record type to indicate that those records are compressed.
Reviewed By: anand1976
Differential Revision: D34709167
Pulled By: sidroyc
fbshipit-source-id: a37a3cd1301adff6152fb3fcd23726106af07dd4
Summary:
When WAL compression is enabled, add a record (new record type) to store the compression type to indicate that all subsequent records are compressed. The log reader will store the compression type when this record is encountered and use the type to uncompress the subsequent records. Compress and uncompress to be implemented in subsequent diffs.
Enabled WAL compression in some WAL tests to check for regressions. Some tests that rely on offsets have been disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9556
Reviewed By: anand1976
Differential Revision: D34308216
Pulled By: sidroyc
fbshipit-source-id: 7f10595e46f3277f1ea2d309fbf95e2e935a8705
Summary:
WAL may be truncated to an incomplete record due to crash while writing
the last record or corruption. In the former case, no hole will be
produced since no ACK'd data was lost. In the latter case, a hole could
be produced without this PR since we proceeded to recover the next WAL
as if nothing happened. This PR changes the record reading code to
always report a corruption for incomplete records in
`kPointInTimeRecovery` mode, and the upper layer will only ignore them
if the next WAL has consecutive seqnum (i.e., we are guaranteed no
hole).
While this solves the hole problem for the case of incomplete
records, the possibility is still there if the WAL is corrupted by
truncation to an exact record boundary. This PR also regresses how much data
can be recovered when writes are mixed with/without
`WriteOptions::disableWAL`, as then we can not distinguish between a
seqnum gap caused by corruption and a seqnum gap caused by a `disableWAL` write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7701
Test Plan:
Interestingly there already was a test for this case
(`DBWALTestWithParams.kPointInTimeRecovery`); it just had a typo bug in
the verification that prevented it from noticing holes in recovery.
Reviewed By: anand1976
Differential Revision: D25111765
Pulled By: ajkr
fbshipit-source-id: 5e330b13b1ee2b5be096cea9d0ff6075843e57b6
Summary:
This is a "real" fix for the issue worked around in https://github.com/facebook/rocksdb/issues/7294.
To get DB checksum info for live files, we now read the manifest file
that will become part of the checkpoint/backup. This requires a little
extra handling in taking a custom checkpoint, including only reading the
manifest file up to the size prescribed by the checkpoint.
This moves GetFileChecksumsFromManifest from backup code to
file_checksum_helper.{h,cc} and removes apparently unnecessary checking
related to column families.
Updated HISTORY.md and warned potential future users of
DB::GetLiveFilesChecksumInfo()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7309
Test Plan: updated unit test, before and after
Reviewed By: ajkr
Differential Revision: D23311994
Pulled By: pdillinger
fbshipit-source-id: 741e30a2dc1830e8208f7648fcc8c5f000d4e2d5
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
clang analyzer currently fails with the following warnings:
> db/log_reader.cc:323:9: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:344:11: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:369:11: warning: Undefined or garbage value returned to caller
return r;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4583
Differential Revision: D10523517
Pulled By: miasantreble
fbshipit-source-id: 0cc8b8f27657b202bead148bbe7c4aa84fed095b
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
The code is dead in RocksDB as `log::Reader::initial_offset_` is always zero. We should delete it so we don't have to maintain it like in #4359.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4362
Differential Revision: D9817829
Pulled By: ajkr
fbshipit-source-id: 474a2c679e5bd273b40608f3a5332931d9eefe6d
Summary:
- Avoid `strdup` to use jemalloc on Windows
- Use `size_t` for consistency
- Add GCC 8 to Travis
- Add CMAKE_BUILD_TYPE=Release to Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3433
Differential Revision: D6837948
Pulled By: sagar0
fbshipit-source-id: b8543c3a4da9cd07ee9a33f9f4623188e233261f
If we are in kTolerateCorruptedTailRecords, treat these
errors as the end of the log. This is particularly
important for recycled logs, where we will regularly see
corrupted headers (bad length or checksum) when replaying
a log. If we are aligned with a block boundary or get lucky,
we will land on an old header and see the log number
mismatch, but more commonly we will land midway through
some previous block and record and effectively see noise.
These must be treated as the end of the log in order for
recycling to work.
This makes the LogTest.Recycle/1 test pass.
We also modify a number of existing tests because the
recycled log files behave fundamentally differently in that
they always stop when they reach the first bad record.
Signed-off-by: Sage Weil <sage@redhat.com>
Introduce new tags for records that have a log_number. This changes the
header size from 7 to 11 for these records, making this a
backward-incompatible change.
If we read a record that belongs to a different log_number (i.e., a
previous instantiation of this log file, before it was most recently
recycled), we return kOldRecord from ReadPhysicalRecord. ReadRecord
will translate this into a kEof or kBadRecord depending on what the
WAL recovery mode is.
We make several adjustments to the log_test.cc tests to compensate for the
fact that the header size varies between the two modes.
Signed-off-by: Sage Weil <sage@redhat.com>
Move the WAL recovery mode logic out of ReadPhysicalRecord. To do this we
introduce a new type indicating when we fail to read a valid header.
Signed-off-by: Sage Weil <sage@redhat.com>
We will need the log number to validate the recycle-style CRCs. The log
is helpful for debugging, but optional, as not all callers have it.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
The "one size fits all" approach with WAL recovery will only introduce inconvenience for our varied clients as we go forward. The current recovery is a bit heuristic. We introduce the following levels of consistency while replaying the WAL.
1. RecoverAfterRestart (kTolerateCorruptedTailRecords)
This mocks the current recovery mode.
2. RecoverAfterCleanShutdown (kAbsoluteConsistency)
This is ideal for unit test and cases where the store is shutdown cleanly. We tolerate no corruption or incomplete writes.
3. RecoverPointInTime (kPointInTimeRecovery)
This is ideal when using devices with controller cache or file systems which can loose data on restart. We recover upto the point were is no corruption or incomplete write.
4. RecoverAfterDisaster (kSkipAnyCorruptRecord)
This is ideal mode to recover data. We tolerate corruption and incomplete writes, and we hop over those sections that we cannot make sense of salvaging as many records as possible.
Test Plan:
(1) Run added unit test to cover all levels.
(2) Run make check.
Reviewers: leveldb, sdong, igor
Subscribers: yoshinorim, dhruba
Differential Revision: https://reviews.facebook.net/D38487
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary:
This diff does two things:
(1) Log::Reader does not report a corruption when the last record in a log or manifest file is truncated (meaning that log writer died in the middle of the write). Inherited the code from LevelDB: https://code.google.com/p/leveldb/source/detail?r=269fc6ca9416129248db5ca57050cd5d39d177c8#
(2) Turn off mmap writes for all writes to log and manifest files
(2) is necessary because if we use mmap writes, the last record is not truncated, but is actually filled with zeros, making checksum fail. It is hard to recover from checksum failing.
Test Plan:
Added unit tests from LevelDB
Actually recovered a "corrupted" MANIFEST file.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16119
Summary:
Blocks in the transaction log are a fixed size, but the last block in the transaction log file is usually a partial block. When a new record is added after the reader hit the end of the file, a new physical record will be appended to the last block. ReadPhysicalRecord can only read full blocks and assumes that the file position indicator is aligned to the start of a block. If the reader is forced to read further by simply clearing the EOF flag, ReadPhysicalRecord will read a full block starting from somewhere in the middle of a real block, causing it to lose alignment and to have a partial physical record at the end of the read buffer. This will result in length mismatches and checksum failures. When the log file is tailed for replication this will cause the log iterator to become invalid, necessitating the creation of a new iterator which will have to read the log file from scratch.
This diff fixes this issue by reading the remaining portion of the last block we read from. This is done when the reader is forced to read further (UnmarkEOF is called).
Test Plan:
- Added unit tests
- Stress test (with replication). Check dbdir/LOG file for corruptions.
- Test on test tier
Reviewers: emayanke, haobo, dhruba
Reviewed By: haobo
CC: vamsi, sheki, dhruba, kailiu, igor
Differential Revision: https://reviews.facebook.net/D15249
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
Slight tweak to the no-overlap optimization: only push to
level 2 to reduce the amount of wasted space when the same
small key range is being repeatedly overwritten.
Fix for Issue 18: Avoid failure on Windows by avoiding
deletion of lock file until the end of DestroyDB().
Fix for Issue 19: Disregard sequence numbers when checking for
overlap in sstable ranges. This fixes issue 19: when writing
the same key over and over again, we would generate a sequence
of sstables that were never merged together since their sequence
numbers were disjoint.
Don't ignore map/unmap error checks.
Miscellaneous fixes for small problems Sanjay found while diagnosing
issue/9 and issue/16 (corruption_testr failures).
- log::Reader reports the record type when it finds an unexpected type.
- log::Reader no longer reports an error when it encounters an expected
zero record regardless of the setting of the "checksum" flag.
- Added a missing forward declaration.
- Documented a side-effects of larger write buffer sizes
(longer recovery time).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@37 62dab493-f737-651d-591e-8d6aee1b9529
Changyu Bi