Summary:
This also removes the obsolete names BackupableDBOptions
and UtilityDB. API users must now use BackupEngineOptions and
DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced
`rocksdb_backup_engine_*`. Similar renaming in Java API.
In reference to https://github.com/facebook/rocksdb/issues/9389
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33780269
Pulled By: pdillinger
fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac
Summary:
MemTable::MultiGet was not considering range tombstones before
querying Bloom filter. This means range tombstones would be skipped for
keys (or prefixes) with no other entries in the memtable. This could cause
old values for a key (in SST files) to still show up until the range tombstone
covering it has been flushed.
This is fixed by essentially disabling the memtable Bloom filter when there
are any range tombstones. (This could be better optimized in the future, but
good enough for now.)
Did some other cleanup/optimization in the same code to (more than) offset
the cost of checking on range tombstones in more cases. There is now
notable improvement when memtable_whole_key_filtering and prefix_extractor
are used together (unusual), and this makes MultiGet closer to the Get
implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453
Test Plan:
new unit test added. Added memtable Bloom to crash test.
Performance testing
--------------------
Build WAL-only DB (recovers to memtable):
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000
```
Query test command, to maximize sensitivity to the changed code:
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS
```
(Note -num here is 10x larger for mostly memtable misses)
Before & after run simultaneously, average over 10 iterations per data point, ops/sec.
MWKF=0 PXS=0 (Bloom disabled)
Before: 5724844
After: 6722066
MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful)
Before: 9981319
After: 10237990
MWKF=0 PXS=8 (prefixes unique; Bloom useful)
Before: 12081715
After: 12117603
MWKF=1 PXS=0 (whole key Bloom useful)
Before: 11944354
After: 12096085
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version)
Before: 9444299
After: 11826029
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version)
Before: 11784465
After: 11778591
Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster.
Reviewed By: ajkr
Differential Revision: D33805025
Pulled By: pdillinger
fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
In RocksDB, this option was already marked as "NOT SUPPORTED" for a long time, and setting this option does not have any effect on the behavior of RocksDB library. Therefore, we are removing it in the preparations of the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9450
Reviewed By: ajkr
Differential Revision: D33802466
Pulled By: bjlemaire
fbshipit-source-id: 97570985f1400525304053476450f7ef504c0cd5
Summary:
Regexes are considered potentially problematic for use in
registering RocksDB extensions, so we are removing
ObjectLibrary::Register() and the Regex public API it depended on (now
unused).
In reference to https://github.com/facebook/rocksdb/issues/9389
Why?
* The power of Regexes can make it hard to reason about which extension
will match what. (The replacement API isn't perfect, but we are at least
"holding the line" on patterns we have seen in practice.)
* It is easy to make regexes that don't quite mean what you think they
mean, such as forgetting that the `.` in `foo.bar` can match any character
or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`.
* Some regexes and implementations can have disastrously bad
performance. This might not be much practical concern for ObjectLibray
here, but we don't want to encourage potentially dangerous further use
in production code. (Testing code is fine. See TestRegex.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33792342
Pulled By: pdillinger
fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec
Summary:
There is a race in SstFileManagerImpl between the ClearError() function
and CancelErrorRecovery(). The race can cause ClearError() to deref the
file system pointer after it has been freed. This is likely to occur
during process shutdown, when the order of destruction of the
DB/Env/FileSystem and SstFileManagerImpl is not deterministic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9435
Test Plan:
Reproduce the crash in a TSAN build by introducing sleeps in the code, and verify with
the fix.
Reviewed By: siying
Differential Revision: D33774696
Pulled By: anand1976
fbshipit-source-id: 643d3da31b8d2ee6d9b6db5d33327e0053ce3b83
Summary:
RocksDB has marked DB::AddFile() as "DEPRECATED_FUNC" for a long time, and
it will be removed in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9433
Test Plan: make check -j64; CircleCI
Reviewed By: riversand963
Differential Revision: D33763987
Pulled By: akankshamahajan15
fbshipit-source-id: a3407324479bb43689e1213e4e29d53095e7579a
Summary:
This PR moves RADOS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host RADOS support. At this point,
people can start from the example repo and fork.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9206
Test Plan:
Follow instructions in https://github.com/riversand963/rocksdb-rados-env/blob/main/README.md and build
test binary `env_librados_test` and run it.
Also, make check
Reviewed By: ajkr
Differential Revision: D33751690
Pulled By: riversand963
fbshipit-source-id: 30466c62afa9e4619847a48567ed158e62835e35
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
Loose ends relate to mmap on 32-bit systems. (Testing is more
complicated when the feature was completely disabled on 32-bit.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9386
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D33590715
Pulled By: pdillinger
fbshipit-source-id: f2637036a538a552200adee65b6765fce8cae27b
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
Closing https://github.com/facebook/rocksdb/issues/5954
fsync/fdatasync on Linux:
```
(fsync/fdatasync) includes writing through or flushing a disk cache if present.
```
However, on OS X and iOS:
```
(fsync) will flush all data from the host to the drive (i.e. the "permanent storage device"),
the drive itself may not physically write the data to the platters for quite some time and it
may be written in an out-of-order sequence.
```
Solution is to use `fcntl(F_FULLFSYNC)` on OS X so that we get the same
persistence guarantee.
According to OSX man page,
```
The F_FULLFSYNC fcntl asks the drive to flush **all** buffered data to permanent storage.
```
This suggests that it will be no faster than `fsync` on Linux, since Linux, according to its man page,
```
writing through or flushing a disk cache if present
```
It means Linux may not flush **all** data from disk cache.
This is similar to bug reports/fixes in:
- golang: https://github.com/golang/go/issues/26650
- leveldb: 296de8d5b8.
Not sure if we should fallback to fsync since we break persistence contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9356
Reviewed By: jay-zhuang
Differential Revision: D33417416
Pulled By: riversand963
fbshipit-source-id: 475548ff9c5eaccde325e0f6842694271cbc8cb7
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
Fix https://github.com/facebook/rocksdb/issues/8046 : FlushMemTable return ok but memtable does not synchronize flush. The way to fix it is to expose RecoveryError.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8173
Reviewed By: ajkr
Differential Revision: D31674552
Pulled By: jay-zhuang
fbshipit-source-id: 9d16b69ba12a196bb429332ec8224754de97773d
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Closing https://github.com/facebook/rocksdb/issues/5006
Calling `DB::DestroyColumnFamilyHandle(column_family)` with `column_family` being the return value of
`DB::DefaultColumnFamily()` will return `Status::InvalidArgument()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9347
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D33369675
Pulled By: riversand963
fbshipit-source-id: a8266a4daddf2b7a773c2dc7f3eb9a4adfb6b6dd
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9339
When writing SST file, the name, computed as `prefix_extractor->GetId()` will be written to the properties block.
When the SST is opened again in the future, `CreateFromString()` will take the name as argument and try
to create a prefix extractor object. Without this fix, the C API will pass a `Wrapper` pointer to the underlying
DB's `prefix_extractor`. `Wrapper::GetId()`, in this case, will be missing the prefix length component, causing a
prefix extractor of length 0 to be silently created and used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9343
Test Plan:
```
make c_test
./c_test
```
Reviewed By: mrambacher
Differential Revision: D33355549
Pulled By: riversand963
fbshipit-source-id: c92c3acd8be262c3bff8794b4229e42b9ee31203
Summary:
Several improvements to SimulatedHybridFileSystem:
(1) Allow a mode where all I/Os to all files simulate HDD. This can be enabled in db_bench using -simulate_hdd
(2) Latency calculation is slightly more accurate
(3) Allow to simulate more than one HDD spindles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9301
Test Plan: Run db_bench and observe the results are reasonable.
Reviewed By: jay-zhuang
Differential Revision: D33141662
fbshipit-source-id: b736e58c4ba910d06899cc9ccec79b628275f4fa
Summary:
This option causes trace records to be written in the serialized write thread. That way, the write records in the trace must follow the same order as writes that are logged to WAL and writes that are applied to the DB.
By default I left it disabled to match existing behavior. I enabled it in `db_stress`, though, as that use case requires order of write records in trace matches the order in WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9334
Test Plan:
- See if below unsynced data loss crash test can run for 24h straight. It used to crash after a few hours when reaching an unlucky trace ordering.
```
DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm /usr/local/bin/python3 -u tools/db_crashtest.py blackbox --interval=10 --max_key=100000 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --value_size_mult=33 --sync_fault_injection=1 --test_batches_snapshots=0 --duration=86400
```
Reviewed By: zhichao-cao
Differential Revision: D33301990
Pulled By: ajkr
fbshipit-source-id: 82d97559727adb4462a7af69758449c8725b22d3
Summary:
As (https://github.com/facebook/rocksdb/issues/9210) discussed, the **full_history_ts_low** is a member of CompactRangeOptions currently, which means a CF's fullHistoryTsLow is advanced only when users submit a CompactRange request.
However, users may want to advance the fllHistoryTsLow without an immediate compact.
This merge make IncreaseFullHistoryTsLow to a public API so users can advance each CF's fullHistoryTsLow seperately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9221
Reviewed By: akankshamahajan15
Differential Revision: D33201106
Pulled By: riversand963
fbshipit-source-id: 9cb1d013ba93260f72e16353e693ffee167b47ee
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
`db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins
data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619).
In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in
the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a
file from a given level twice.
Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause.
WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each
`WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared.
If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS`
buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can
choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then
such data will still exist in the `FaultInjectionTestFS`'s buffer.
Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead
to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`.
We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the
content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the
data appended to the file.
To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode.
This PR includes a unit test to reproduce a case when write error injection
to `WritableFile` can cause duplicate trailing entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D33033984
Pulled By: riversand963
fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
Previously, the OnErrorRecoveryCompleted callback was called when
RocksDB was able to successfully recover from a retryable error.
However, if the recovery failed and was eventually stopped, there was no
indication of the status. To fix that, a new OnErrorRecoveryEnd callback
is introduced that deprecates the OnErrorRecoveryCompleted callback. The
new callback is called with the original error and the new error status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9244
Test Plan: Add a new unit test in error_handler_fs_test
Reviewed By: zhichao-cao
Differential Revision: D32922303
Pulled By: anand1976
fbshipit-source-id: f04e77a9cb92c5ea6385590682d3fcf559971b99
Summary:
When table_options.prepopulate_block_cache is set to
BlockBasedTableOptions::PrepopulateBlockCache::kFlushOnly and
table_options.partition_filters is also set true, then there is
segmentation failure when top level filter is fetched because its
entered with wrong type in cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9263
Test Plan:
Updated unit tests;
Ran db_stress: make crash_test -j32
Reviewed By: pdillinger
Differential Revision: D32936566
Pulled By: akankshamahajan15
fbshipit-source-id: 8bd79e53830d3e3c1bb79787e1ffbc3cb46d4426
Summary:
**Context:**
Searching `TableProperties::properties_offsets` across the codebase reveals that internally it is only used to find the external SST file's global seqno offeset. Therefore we can narrow it down and replace this map property with a uint64_t property `external_sst_file_global_seqno_offset` to save memory usage related to table properties.
Note:
- See PR comments for discussion about potential impact on existing external usage of `TableProperties::properties_offsets`
- See PR comments for discussion on keeping external SST file global seqno's offset VS using a simple flag indicating seqno's existence.
**Summary:**
- Replaced `TableProperties::properties_offsets` with `TableProperties::external_sst_file_global_seqno_offset`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9212
Test Plan: - Relied on existing tests should be sufficient since `TableProperties::properties_offsets` existed before and should already be tested.
Reviewed By: ajkr
Differential Revision: D32665941
Pulled By: hx235
fbshipit-source-id: 718e44617346dc4f3b1276ee953e61c196277795
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9205
Update WriteBatch::AssignTimestamp() APIs so that they take an
additional argument, i.e. a function object called `checker` indicating the user-specified logic of performing
checks on timestamp sizes.
WriteBatch is a building block used by multiple other RocksDB components, each of which may track
timestamp information in different data structures. For example, transaction can either write to
`WriteBatchWithIndex` which is a `WriteBatch` with index, or write directly to raw `WriteBatch` if
`Transaction::DisableIndexing()` is called.
`WriteBatchWithIndex` keeps mapping from column family id to comparator, and transaction needs
to keep similar information for the `WriteBatch` if user calls `Transaction::DisableIndexing()` (dynamically)
so that we will know the size of each timestamp later. The bookkeeping info maintained by `WriteBatchWithIndex`
and `Transaction` should not overlap.
When we later call `WriteBatch::AssignTimestamp()`, we need to use these data structures to guarantee
that we do not accidentally assign timestamps for keys from column families that disable timestamp.
Reviewed By: ltamasi
Differential Revision: D31735186
fbshipit-source-id: 8b1709ed880ac72f995aa9e012e5873b290840a7
Summary:
https://github.com/facebook/rocksdb/issues/9026 fixed histogram NUM_FILES_IN_SINGLE_COMPACTION for level compaction, but missed fix for universal compaction.
This PR fixed NUM_FILES_IN_SINGLE_COMPACTION for universal compaction.
Quote from https://github.com/facebook/rocksdb/issues/9026:
> currently histogram `NUM_FILES_IN_SINGLE_COMPACTION` just counted files in first level of compaction input, this fix counts files in all levels of compaction input.
Thanks for ajkr pointed this missed fix!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9168
Reviewed By: akankshamahajan15
Differential Revision: D32434494
Pulled By: ajkr
fbshipit-source-id: 93ea092af4afbd8dce67898ffb350cf26b065ed2
Summary:
Original unit test fail to test the case of multi-cf mode switching to new manifest. The assertion
failure will trigger when the primary instance reopens and secondary continues to tail the
newly-created MANIFEST. Fix the assertion failure and update existing unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9143
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32574233
Pulled By: riversand963
fbshipit-source-id: 857ddbe994019091276458abebcf8e2b65340468
Summary:
`ReadOptions::iter_start_seqnum` and `DBOptions::preserve_deletes` are
deprecated, please try using user defined timestamp feature instead.
The feature is used to support differential snapshots, but not well
maintained (https://github.com/facebook/rocksdb/issues/6837, https://github.com/facebook/rocksdb/issues/8472) and the interface is not user friendly which
returns an internal key from the iterator. The user defined timestamp
feature is a more flexible feature to support similar usecase, please
switch to that if you have such usecase.
The deprecated feature will be removed in a future release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9091
Test Plan:
check LOG
Fix https://github.com/facebook/rocksdb/issues/9090
Reviewed By: ajkr
Differential Revision: D32071750
Pulled By: jay-zhuang
fbshipit-source-id: b882c4668dd1bf26ce03c4c192f1bba584bf6104
Summary:
After RocksDB 6.19 and before this PR, RocksDB FlushJob may pick more memtables to flush beyond synced WALs.
This can be problematic if there are multiple column families, since it can prematurely advance the flushed column
family's log_number. Should subsequent attempts fail to sync the latest WALs and the database goes
through a recovery, it may detect corrupted WAL number below the flushed column family's log number
and complain about column family inconsistency.
To fix, we record the maximum memtable ID of the column family being flushed. Then we call SyncClosedLogs()
so that all closed WALs at the time when memtable ID is recorded will be synced.
I also disabled a unit test temporarily due to reasons described in https://github.com/facebook/rocksdb/issues/9151
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9142
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D32299956
Pulled By: riversand963
fbshipit-source-id: 0da75888177d91905cf8c9d00605b73afb5970a7
Summary:
- Fixed bug where bottom-pri manual compactions were counting towards `bg_compaction_scheduled_` instead of `bg_bottom_compaction_scheduled_`. It seems to have no negative effect.
- Fixed bug where automatic compaction scheduling did not consider `bg_bottom_compaction_scheduled_`. Now automatic compactions cannot be scheduled that exceed the per-DB compaction concurrency limit (`max_compactions`) when some existing compactions are bottommost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9179
Test Plan: new unit test for manual/automatic. Also verified the existing automatic/automatic test ("ConcurrentBottomPriLowPriCompactions") hanged until changing it to explicitly enable concurrency.
Reviewed By: riversand963
Differential Revision: D32488048
Pulled By: ajkr
fbshipit-source-id: 20c4c0693678e81e43f85ed3cc3402fcf26e3310
Summary:
Add a new API in listener.h that notifies about IOErrors on
Read/Write/Append/Flush etc. The API reports about IOStatus, filename, Operation
name, offset and length.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9177
Test Plan: Added new unit tests
Reviewed By: anand1976
Differential Revision: D32470627
Pulled By: akankshamahajan15
fbshipit-source-id: 189a717033590ae227b3beae8b1e7e185e4cdc12
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge.
**Context:**
Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`.
The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option.
**Summary:**
- Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction:
- hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance),
- banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`),
- final filter (i.e, `mutable_buf`'s size).
- Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table.
- Added option fo run `filter_bench` with this memory reservation feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073
Test Plan:
- Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory`
- To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally
- Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter
- Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below:
- FastLocalBloom
- baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`:
- **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0)
- Ribbon128
- baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `:
- **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0)
- And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console.
Reviewed By: pdillinger
Differential Revision: D31991348
Pulled By: hx235
fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
Peter Dillinger