Tag:
Branch:
Tree:
94e245a14d
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1382 Commits (94e245a14d2a3c57214bb884b843d7f89f5a1bf6)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yanqin Jin
|
94e245a14d |
Improve stress test for MultiOpsTxnsStressTest (#9829)
Summary: Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions. 1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw. 2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true. 3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829 Test Plan: ``` TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn ``` Reviewed By: pdillinger Differential Revision: D35806678 Pulled By: riversand963 fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616 |
3 years ago |
|
Herman Lee
|
d9d456de49 |
Fix locktree accesses to PessimisticTransactions (#9898)
Summary: The current locktree implementation stores the address of the PessimisticTransactions object as the TXNID. However, when a transaction is blocked on a lock, it records the list of waitees with conflicting locks using the rocksdb assigned TransactionID. This is performed by calling GetID() on PessimisticTransactions objects of the waitees, and then recorded in the waiter's list. However, there is no guarantee the objects are valid when recording the waitee list during the conflict callbacks because the waitee could have released the lock and freed the PessimisticTransactions object. The waitee/txnid values are only valid PessimisticTransaction objects while the mutex for the root of the locktree is held. The simplest fix for this problem is to use the address of the PessimisticTransaction as the TransactionID so that it is consistent with its usage in the locktree. The TXNID is only converted back to a PessimisticTransaction for the report_wait callbacks. Since these callbacks are now all made within the critical section where the lock_request queue mutx is held, these conversions will be safe. Otherwise, only the uint64_t TXNID of the waitee is registerd with the waiter transaction. The PessimisitcTransaction object of the waitee is never referenced. The main downside of this approach is the TransactionID will not change if the PessimisticTransaction object is reused for new transactions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9898 Test Plan: Add a new test case and run unit tests. Also verified with MyRocks workloads using range locks that the crash no longer happens. Reviewed By: riversand963 Differential Revision: D35950376 Pulled By: hermanlee fbshipit-source-id: 8c9cae272e23e487fc139b6a8ed5b8f8f24b1570 |
3 years ago |
|
Yanqin Jin
|
d13825e586 |
Add rollback_deletion_type_callback to TxnDBOptions (#9873)
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
|
3 years ago |
|
sdong
|
4f9c0fd083 |
Add Aggregation Merge Operator (#9780)
Summary: Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types. See comments of function CreateAggMergeOperator() for actual usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780 Test Plan: Add a unit test to coverage various cases. Reviewed By: ltamasi Differential Revision: D35267444 fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628 |
3 years ago |
|
Levi Tamasi
|
db536ee045 |
Propagate errors from UpdateBoundaries (#9851)
Summary: In `FileMetaData`, we keep track of the lowest-numbered blob file referenced by the SST file in question for the purposes of BlobDB's garbage collection in the `oldest_blob_file_number` field, which is updated in `UpdateBoundaries`. However, with the current code, `BlobIndex` decoding errors (or invalid blob file numbers) are swallowed in this method. The patch changes this by propagating these errors and failing the corresponding flush/compaction. (Note that since blob references are generated by the BlobDB code and also parsed by `CompactionIterator`, in reality this can only happen in the case of memory corruption.) This change necessitated updating some unit tests that involved fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like `"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es. Some were relying on the earlier behavior to simulate corruption; these were replaced with `SyncPoint`-based test code that corrupts a valid blob reference at read time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D35683671 Pulled By: ltamasi fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6 |
3 years ago |
|
Peter Dillinger
|
efd035164b |
Meta-internal folly integration with F14FastMap (#9546)
Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94 |
3 years ago |
|
mrambacher
|
b7db7eae26 |
Plugin Registry (#7949)
Summary: Added a Plugin class to the ObjectRegistry. Enabled compile-time and program-time addition of plugins to the Registry. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7949 Reviewed By: mrambacher Differential Revision: D33517674 Pulled By: pdillinger fbshipit-source-id: c3e3270aab76a489bfa9e85d78cdfca951912557 |
3 years ago |
|
gitbw95
|
f241d082b6 |
Prevent double caching in the compressed secondary cache (#9747)
Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12 |
3 years ago |
|
Yanqin Jin
|
1a1c5bda23 |
Disallow commit-time-batch for write-prepared/write-unprepared txn conditionally (#9794)
Summary: For write-prepared/write-unprepared transactions, GetCommitTimeWriteBatch() can be used only if the transaction is started with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set to true. Otherwise, it is possible that multiple uncommitted versions of the same key exist in the database. During bottommost compaction, RocksDB may set the sequence numbers of both to zero once they become committed, causing output SST file to have two identical internal keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794 Test Plan: make check pay special attention to the following ``` transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/* ``` Reviewed By: lth Differential Revision: D35327214 Pulled By: riversand963 fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f |
3 years ago |
|
Peter Dillinger
|
6534c6dea4 |
Fix remaining uses of "backupable" (#9792)
Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329 |
3 years ago |
|
Chen Lixiang
|
cd59b139fc |
Fix some typos in comments and HISTORY.md (#9798)
Summary: compation --> compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/9798 Reviewed By: ajkr Differential Revision: D35341611 Pulled By: jay-zhuang fbshipit-source-id: 5ea07527c311de75cade219456b6ee52b23020f6 |
3 years ago |
|
Peter Dillinger
|
40e3f30a28 |
Fix FileStorageInfo fields from GetLiveFilesMetaData (#9769)
Summary: In making `SstFileMetaData` inherit from `FileStorageInfo`, I overlooked setting some `FileStorageInfo` fields when then default `SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`. Also removed some buggy `static_cast<size_t>` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769 Test Plan: Updated tests Reviewed By: jay-zhuang Differential Revision: D35220383 Pulled By: pdillinger fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8 |
3 years ago |
|
gitbw95
|
8102690a52 |
Update Cache::Release param from force_erase to erase_if_last_ref (#9728)
Summary: The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728 Reviewed By: pdillinger Differential Revision: D35038673 Pulled By: gitbw95 fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f |
3 years ago |
|
Peter Dillinger
|
cff0d1e8e6 |
New backup meta schema, with file temperatures (#9660)
Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a |
3 years ago |
|
Yanqin Jin
|
565fcead22 |
Fix clang-analyze by adding assertion (#9682)
Summary: Clang-analyze complains about potential nullptr dereference. Fix by adding an assertion to make clang happy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9682 Test Plan: USE_CLANG=1 make -j20 analyze_incremental Reviewed By: ltamasi Differential Revision: D34755210 Pulled By: riversand963 fbshipit-source-id: 948e1899846ee1aa05a1b500a11ff43b0b412e0a |
3 years ago |
|
Yanqin Jin
|
3b6dc049f7 |
Support user-defined timestamps in write-committed txns (#9629)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43 |
3 years ago |
|
Peter Dillinger
|
ce60d0cbe5 |
Test refactoring for Backups+Temperatures (#9655)
Summary: In preparation for more support for file Temperatures in BackupEngine, this change does some test refactoring: * Move DBTest2::BackupFileTemperature test to BackupEngineTest::FileTemperatures, with some updates to make it work in the new home. This test will soon be expanded for deeper backup work. * Move FileTemperatureTestFS from db_test2.cc to db_test_util.h, to support sharing because of above moved test, but split off the "no link" part to the test needing it. * Use custom FileSystems in backupable_db_test rather than custom Envs, because going through Env file interfaces doesn't support temperatures. * Fix RemapFileSystem to map DirFsyncOptions::renamed_new_name parameter to FsyncWithDirOptions, which was required because this limitation caused a crash only after moving to higher fidelity of FileSystem interface (vs. LegacyDirectoryWrapper throwing away some parameter details) * `backupable_options_` -> `engine_options_` as part of the ongoing work to get rid of the obsolete "backupable" naming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9655 Test Plan: test code updates only Reviewed By: jay-zhuang Differential Revision: D34622183 Pulled By: pdillinger fbshipit-source-id: f24b7a596a89b9e089e960f4e5d772575513e93f |
3 years ago |
|
Yanqin Jin
|
6f12599863 |
Support WBWI for keys having timestamps (#9603)
Summary: This PR supports inserting keys to a `WriteBatchWithIndex` for column families that enable user-defined timestamps and reading the keys back. **The index does not have timestamps.** Writing a key to WBWI is unchanged, because the underlying WriteBatch already supports it. When reading the keys back, we need to make sure to distinguish between keys with and without timestamps before comparison. When user calls `GetFromBatchAndDB()`, no timestamp is needed to query the batch, but a timestamp has to be provided to query the db. The assumption is that data in the batch must be newer than data from the db. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9603 Test Plan: make check Reviewed By: ltamasi Differential Revision: D34354849 Pulled By: riversand963 fbshipit-source-id: d25d1f84e2240ce543e521fa30595082fb8db9a0 |
3 years ago |
|
Jay Zhuang
|
d3a2f284d9 |
Add Temperature info in `NewSequentialFile()` (#9499)
Summary: Add Temperature hints information from RocksDB in API `NewSequentialFile()`. backup and checkpoint operations need to open the source files with `NewSequentialFile()`, which will have the temperature hints. Other operations are not covered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9499 Test Plan: Added unittest Reviewed By: pdillinger Differential Revision: D34006115 Pulled By: jay-zhuang fbshipit-source-id: 568b34602b76520e53128672bd07e9d886786a2f |
3 years ago |
|
mrambacher
|
30b08878d8 |
Make FilterPolicy Customizable (#9590)
Summary: Make FilterPolicy into a Customizable class. Allow new FilterPolicy to be discovered through the ObjectRegistry Pull Request resolved: https://github.com/facebook/rocksdb/pull/9590 Reviewed By: pdillinger Differential Revision: D34327367 Pulled By: mrambacher fbshipit-source-id: 37e7edac90ec9457422b72f359ab8ef48829c190 |
3 years ago |
|
Andrew Kryczka
|
babe56ddba |
Add rate limiter priority to ReadOptions (#9424)
Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c |
3 years ago |
|
Yanqin Jin
|
1cda273dc3 |
Fix a silent data loss for write-committed txn (#9571)
Summary:
The following sequence of events can cause silent data loss for write-committed
transactions.
```
Time thread 1 bg flush
| db->Put("a")
| txn = NewTxn()
| txn->Put("b", "v")
| txn->Prepare() // writes only to 5.log
| db->SwitchMemtable() // memtable 1 has "a"
| // close 5.log,
| // creates 8.log
| trigger flush
| pick memtable 1
| unlock db mutex
| write new sst
| txn->ctwb->Put("gtid", "1") // writes 8.log
| txn->Commit() // writes to 8.log
| // writes to memtable 2
| compute min_log_number_to_keep_2pc, this
| will be 8 (incorrect).
|
| Purge obsolete wals, including 5.log
|
V
```
At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in
memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"},
only the commit marker of txn is in 8.log
The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`.
In the above example, when bg flush thread tries to find obsolete wals, it uses the information
computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()`
depends on three components
- `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit.
- `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed.
- `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data.
The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families
that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is
only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log.
We should return this information via `FindMinPrepLogReferencedByMemTable()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571
Test Plan:
```
./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/*
make check
```
Reviewed By: siying
Differential Revision: D34235236
Pulled By: riversand963
fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
|
3 years ago |
|
mrambacher
|
c42d0cf862 |
Add support for decimals to PatternEntry (#9577)
Summary: Add support for doubles to ObjectLibrary::PatternEntry. This support will allow patterns containing a non-integer number to be parsed correctly. Added appropriate test cases to cover this new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9577 Reviewed By: pdillinger Differential Revision: D34269763 Pulled By: mrambacher fbshipit-source-id: b5ce16cbd3665c2974ec0f3412ef2b403ef8b155 |
3 years ago |
|
Yanqin Jin
|
241b5aa15a |
Timestamp-based validation for pessimistic txn (#9562)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9562 With per-transaction `read_timestamp_`, it is possible to perform transaction validation after locking a key in addition to sequence-based validation. Specifically, if a transaction has a read_timestamp, then we perform timestamp-based validation as well after the key is locked via `GetForUpdate()`. This is to make sure that no other transaction has modified the key and committed successfully since the read timestamp (but before the locking operation) which represents a consistent view of the database. Reviewed By: ltamasi Differential Revision: D31822034 fbshipit-source-id: c6f1828b7fc23e4f85e2d1ed73ff51464a058d91 |
3 years ago |
|
Yanqin Jin
|
d6e1e6f37a |
Add commit_timestamp and read_timestamp to Pessimistic transaction (#9537)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9537 Add `Transaction::SetReadTimestampForValidation()` and `Transaction::SetCommitTimestamp()` APIs with default implementation returning `Status::NotSupported()`. Currently, calling these two APIs do not have any effect. Also add checks to `PessimisticTransactionDB` to enforce that column families in the same db either - disable user-defined timestamp - enable 64-bit timestamp Just to clarify, a `PessimisticTransactionDB` can have some column families without timestamps as well as column families that enable timestamp. Each `PessimisticTransaction` can have two optional timestamps, `read_timestamp_` used for additional validation and `commit_timestamp_` which denotes when the transaction commits. For now, we are going to support `WriteCommittedTxn` (in a series of subsequent PRs) Once set, we do not allow decreasing `read_timestamp_`. The `commit_timestamp_` must be greater than `read_timestamp_` for each transaction and must be set before commit, unless the transaction does not involve any column family that enables user-defined timestamp. TransactionDB builds on top of RocksDB core `DB` layer. Though `DB` layer assumes that user-defined timestamps are byte arrays, `TransactionDB` uses uint64_t to store timestamps. When they are passed down, they are still interpreted as byte-arrays by `DB`. Reviewed By: ltamasi Differential Revision: D31567959 fbshipit-source-id: b0b6b69acab5d8e340cf174f33e8b09f1c3d3502 |
3 years ago |
|
mrambacher
|
81ada95bd7 |
Add STATIC_AVOID_DESTRUCTION for ObjectLibrary/Registry (#9464)
Summary: This change should guarantee that the default ObjectLibrary/Registry are long-lived and not destroyed while the process is running. This will prevent some issues of them being referenced after they were destroyed via the static destruction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9464 Reviewed By: pdillinger Differential Revision: D33849876 Pulled By: mrambacher fbshipit-source-id: 7a69177d7c58c81be293fc7ef8e600d47ddbc14b |
3 years ago |
|
mrambacher
|
fe9d495112 |
Return different Status based on ObjectRegistry::NewObject calls (#9333)
Summary: This fix addresses https://github.com/facebook/rocksdb/issues/9299. If attempting to create a new object via the ObjectRegistry and a factory is not found, the ObjectRegistry will return a "NotSupported" status. This is the same behavior as previously. If the factory is found but could not successfully create the object, an "InvalidArgument" status is returned. If the factory returned a reason why (in the errmsg), this message will be in the returned status. In practice, there are two options in the ConfigOptions that control how these errors are propagated: - If "ignore_unknown_options=true", then both InvalidArgument and NotSupported status codes will be swallowed internally. Both cases will return success - If "ignore_unsupported_options=true", then having no factory will return success but a failing factory will return an error - If both options are false, both cases (no and failing factory) will return errors. In practice this likely only changes Customizable that may be partially available. For example, the JEMallocMemoryAllocator is a built-in allocator that is registered with the system but may not be compiled in. In this case, the status code for this allocator changed from NotSupported("JEMalloc not available") to InvalidArgumen("JEMalloc not available"). Other Customizable builtins/plugins would have the same semantics. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9333 Reviewed By: pdillinger Differential Revision: D33517681 Pulled By: mrambacher fbshipit-source-id: 8033052d4a4a7b88c2d9f90147b1b4467e51f6fd |
3 years ago |
|
Peter Dillinger
|
5cb137a860 |
Work around some new clang-analyze failures (#9515)
Summary: ... seen only in internal clang-analyze runs after https://github.com/facebook/rocksdb/issues/9481 * Mostly, this works around falsely reported leaks by using std::unique_ptr in some places where clang-analyze was getting confused. (I didn't see any changes in C++17 that could make our Status implementation leak memory.) * Also fixed SetBGError returning address of a stack variable. * Also fixed another false null deref report by adding an assert. Also, use SKIP_LINK=1 to speed up `make analyze` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9515 Test Plan: Was able to reproduce the reported errors locally and verify they're fixed (except SetBGError). Otherwise, existing tests Reviewed By: hx235 Differential Revision: D34054630 Pulled By: pdillinger fbshipit-source-id: 38600ef3da75ddca307dff96b7a1a523c2885c2e |
3 years ago |
|
mrambacher
|
aae3093719 |
Introduce a CountedFileSystem for counting file operations (#9283)
Summary: Added a CountedFileSystem that tracks a number of file operations (opens, closes, deletes, renames, flushes, syncs, fsyncs, reads, writes). This class was based on the ReportFileOpEnv from db_bench. This is a stepping stone PR to be able to change the SpecialEnv into a SpecialFileSystem, where several of the file varieties wish to do operation counting. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9283 Reviewed By: pdillinger Differential Revision: D33062004 Pulled By: mrambacher fbshipit-source-id: d0d297a7fb9c48c06cbf685e5fa755c27193b6f5 |
3 years ago |
|
Yanqin Jin
|
3122cb4358 |
Revise APIs related to user-defined timestamp (#8946)
Summary: ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`. Namely, `WriteOptions` should not include information about "what-to-write", but should just include information about "how-to-write". According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore, this PR removes `WriteOptions::timestamp` for compliance. After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and `SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity made me reconsider doing it in another PR (maybe). For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take extra `timestamp` information when writing to `WriteBatch`es. These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list. Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to `WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps allocated already and multiple timestamps can be updated. The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp size of the default column family. This will be used to allocate space when calling APIs that do not specify a column family handle. Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing some assertions about timestamp to returning Status code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946 Test Plan: make check ./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8 ./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0 Make sure there is no perf regression by running the following ``` ./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom ``` Before this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s ``` After this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s ``` Reviewed By: ltamasi Differential Revision: D33721359 Pulled By: riversand963 fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09 |
3 years ago |
|
Peter Dillinger
|
78aee6fedc |
Remove obsolete backupable_db.h, utility_db.h (#9438)
Summary: This also removes the obsolete names BackupableDBOptions and UtilityDB. API users must now use BackupEngineOptions and DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced `rocksdb_backup_engine_*`. Similar renaming in Java API. In reference to https://github.com/facebook/rocksdb/issues/9389 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438 Test Plan: CI Reviewed By: mrambacher Differential Revision: D33780269 Pulled By: pdillinger fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac |
3 years ago |
|
Peter Dillinger
|
449029f865 |
Remove deprecated ObjectLibrary::Register() (and Regex public API) (#9439)
Summary: Regexes are considered potentially problematic for use in registering RocksDB extensions, so we are removing ObjectLibrary::Register() and the Regex public API it depended on (now unused). In reference to https://github.com/facebook/rocksdb/issues/9389 Why? * The power of Regexes can make it hard to reason about which extension will match what. (The replacement API isn't perfect, but we are at least "holding the line" on patterns we have seen in practice.) * It is easy to make regexes that don't quite mean what you think they mean, such as forgetting that the `.` in `foo.bar` can match any character or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`. * Some regexes and implementations can have disastrously bad performance. This might not be much practical concern for ObjectLibray here, but we don't want to encourage potentially dangerous further use in production code. (Testing code is fine. See TestRegex.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439 Test Plan: CI Reviewed By: mrambacher Differential Revision: D33792342 Pulled By: pdillinger fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec |
3 years ago |
|
Yanqin Jin
|
fa52376117 |
Move RADOS support to separate repo (#9206)
Summary: This PR moves RADOS support from RocksDB repo to a separate repo. The new (temporary?) repo in this PR serves as an example before we finalize the decision on where and who to host RADOS support. At this point, people can start from the example repo and fork. The goal is to include this commit in RocksDB 7.0 release. Reference: https://github.com/ajkr/dedupfs by ajkr Pull Request resolved: https://github.com/facebook/rocksdb/pull/9206 Test Plan: Follow instructions in https://github.com/riversand963/rocksdb-rados-env/blob/main/README.md and build test binary `env_librados_test` and run it. Also, make check Reviewed By: ajkr Differential Revision: D33751690 Pulled By: riversand963 fbshipit-source-id: 30466c62afa9e4619847a48567ed158e62835e35 |
3 years ago |
|
Sergei Petrunia
|
c9042db619 |
Range Locking: add support for escalation barriers (#9290)
Summary: Range Locking supports Lock Escalation. Lock Escalation is invoked when lock memory is nearly exhausted and it reduced the amount of memory used by joining adjacent locks. Bridging the gap between certain locks has adverse effects. For example, in MyRocks it is not a good idea to bridge the gap between locks in different indexes, as that get the lock to cover large portions of indexes, or even entire indexes. Resolve this by introducing Escalation Barrier. The escalation process will call the user-provided barrier callback function: bool(const Endpoint& a, const Endpoint& b) If the function returns true, there's a barrier between a and b and Lock Escalation will not try to bridge the gap between a and b. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9290 Reviewed By: akankshamahajan15 Differential Revision: D33486753 Pulled By: riversand963 fbshipit-source-id: f97910b67aba0579ea1d35f523ca6863d3dd018e |
3 years ago |
|
Yanqin Jin
|
0376869f05 |
Remove using namespace (#9369)
Summary: As title. This is part of an fb-internal task. First, remove all `using namespace` statements if applicable. Next, utilize multiple build platforms and see if anything is broken. Should anything become broken, fix the compilation errors with as little extra change as possible. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9369 Test Plan: internal build and make check make clean && make static_lib && cd examples && make all Reviewed By: pdillinger Differential Revision: D33517260 Pulled By: riversand963 fbshipit-source-id: 3fc4ce6402a073421dfd9a9b2d1c79441dca7a40 |
3 years ago |
|
Jay Zhuang
|
9c6fb26033 |
Fix clang13 build error (#9374)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9374 Test Plan: Add CI for clang13 build Reviewed By: riversand963 Differential Revision: D33522867 Pulled By: jay-zhuang fbshipit-source-id: 642756825cf0b51e35861fb847ebaee4611b76ca |
3 years ago |
|
mrambacher
|
1973fcba11 |
Restore Regex support for ObjectLibrary::Register, rename new APIs to allow old one to be deprecated in the future (#9362)
Summary: In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release. Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362 Reviewed By: pdillinger Differential Revision: D33432562 Pulled By: mrambacher fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02 |
3 years ago |
|
Jay Zhuang
|
6bab278291 |
Fix flaky SimCacheTest.SimCacheLogging (#9373)
Summary: The random string may contain the string we're checking, e.g.: ``` ADD - 206FBC78E96BC4C6A2DDDDC0AD5D1ADD - 111 ``` Only check the line starts-with "ADD -". Pull Request resolved: https://github.com/facebook/rocksdb/pull/9373 Test Plan: `gtest-parallel ./sim_cache_test --gtest_filter=SimCacheTest.SimCacheLogging -r 1000` Reviewed By: riversand963 Differential Revision: D33519574 Pulled By: jay-zhuang fbshipit-source-id: d0c1c9b0b489246d292e7da4133030edaa748099 |
3 years ago |
|
mrambacher
|
fe31dc53ca |
Make the Env class Customizable (#9293)
Summary: Allows the Env to have options (Configurable) and loads like other Customizable classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293 Reviewed By: pdillinger, zhichao-cao Differential Revision: D33181591 Pulled By: mrambacher fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7 |
3 years ago |
|
mrambacher
|
1c39b7952b |
Remove/Reduce use of Regex in ObjectRegistry/Library (#9264)
Summary: Added new ObjectLibrary::Entry classes to replace/reduce the use of Regex. For simple factories that only do name matching, there are "StringEntry" and "AltStringEntry" classes. For classes that use some semblance of regular expressions, there is a PatternEntry class that can match a name and prefixes. There is also a class for Customizable::IndividualId format matches. Added tests for the new derivative classes and got all unit tests to pass. Resolves https://github.com/facebook/rocksdb/issues/9225. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9264 Reviewed By: pdillinger Differential Revision: D33062001 Pulled By: mrambacher fbshipit-source-id: c2d2143bd2d38bdf522705c8280c35381b135c03 |
3 years ago |
|
Andrew Kryczka
|
538d2365e9 |
Fix race condition in BackupEngineTest.ChangeManifestDuringBackupCreation (#9327)
Summary:
The failure looked like this:
```
utilities/backupable/backupable_db_test.cc:3161: Failure
Value of: db_chroot_env_->FileExists(prev_manifest_path).IsNotFound()
Actual: false
Expected: true
```
The failure could be coerced consistently with the following patch:
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 80410f671..637636791 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2772,6 +2772,8 @@ void DBImpl::BackgroundCallFlush(Env::Priority thread_pri) {
if (job_context.HaveSomethingToClean() ||
job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) {
mutex_.Unlock();
+ bg_cv_.SignalAll();
+ sleep(1);
TEST_SYNC_POINT("DBImpl::BackgroundCallFlush:FilesFound");
// Have to flush the info logs before bg_flush_scheduled_--
// because if bg_flush_scheduled_ becomes 0 and the lock is
```
The cause was a familiar problem, which is manual flush/compaction may
return before files they obsoleted are removed. The solution is just to
wait for "scheduled" work to complete, which includes all phases
including cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9327
Test Plan:
after this PR, even the above patch to coerce the bug cannot
cause the test to fail.
Reviewed By: riversand963
Differential Revision: D33252208
Pulled By: ajkr
fbshipit-source-id: 720a7eaca58c7247d221911fffe3d5e1dbf581e9
|
3 years ago |
|
Sergei Petrunia
|
1b076e82db |
Expose locktree's wait count in RangeLockManagerHandle::Counters (#9289)
Summary: locktree is a module providing Range Locking. It has a counter for the number of times a lock acquisition request was blocked by an existing conflicting lock and had to wait for it to be released. Expose this counter in RangeLockManagerHandle::Counters::lock_wait_count. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9289 Reviewed By: jay-zhuang Differential Revision: D33079182 Pulled By: riversand963 fbshipit-source-id: 25b1a362d9da247536ab5007bd15900b319f139e |
3 years ago |
|
mrambacher
|
423538a816 |
Make MemoryAllocator into a Customizable class (#8980)
Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76 |
3 years ago |
|
Peter Dillinger
|
0050a73a4f |
New stable, fixed-length cache keys (#9126)
Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f |
3 years ago |
|
Yanqin Jin
|
08721293ea |
Fix a bug causing duplicate trailing entries in WritableFile (buffered IO) (#9236)
Summary: `db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619). In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a file from a given level twice. Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause. WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each `WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared. If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS` buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then such data will still exist in the `FaultInjectionTestFS`'s buffer. Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`. We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the data appended to the file. To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode. This PR includes a unit test to reproduce a case when write error injection to `WritableFile` can cause duplicate trailing entries. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D33033984 Pulled By: riversand963 fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31 |
3 years ago |
|
Hui Xiao
|
cd85439632 |
Make TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAcces less flaky (#9281)
Summary: Context: [Rapid thread creation and deletion](https://github.com/facebook/rocksdb/blob/6.27.fb/utilities/transactions/write_prepared_transaction_test.cc#L439-L444) in `SnapshotConcurrentAccessTest.SnapshotConcurrentAcces` inside a [potentially big loop](https://github.com/facebook/rocksdb/blob/6.27.fb/utilities/transactions/write_prepared_transaction_test.cc#L1238-L1248) can lead to heavy-loading the system with many threads due to delay in actually cleaning up thread's resource in the kernel sometime. We ran into some [flaky failure](https://app.circleci.com/pipelines/github/facebook/rocksdb/10383/workflows/136f1005-80a9-4515-aee9-fe36ac6462a1/jobs/253289) in CI and reproduced it by below: - Command ``` Added `ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();` like https://github.com/facebook/rocksdb/pull/9276 DEBUG_LEVEL=2 make -j56 write_prepared_transaction_test GTEST_CATCH_EXCEPTIONS=0 ~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 ``` - Stack, where `write_prepared_transaction_test.cc:442` in `https://github.com/facebook/rocksdb/issues/9` points to thread creation ``` [ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 ....terminate called after throwing an instance of 'std::system_error' what(): Resource temporarily unavailable Received signal 6 (Aborted) #0 /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x38) [0x7fc114f39438] ... https://github.com/facebook/rocksdb/issues/7 /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0xb8e73) [0x7fc1158a5e73] ?? ??:0 https://github.com/facebook/rocksdb/issues/8 ./write_prepared_transaction_test() [0x4ca86c] std:🧵:thread<rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, std::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> const&, rocksdb::WritePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long)::{lambda()https://github.com/facebook/rocksdb/issues/1}>(rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, s d::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> > const&, rocksdb::WritePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long)::{l mbda()https://github.com/facebook/rocksdb/issues/1}&&) /usr/include/c++/5/thread:137 (discriminator 4) https://github.com/facebook/rocksdb/issues/9 ./write_prepared_transaction_test() [0x4bb80c] rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, std::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> > const&, rocksdb::W itePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long) /home/circleci/project/utilities/transactions/write_prepared_transaction_test.cc:442 https://github.com/facebook/rocksdb/issues/10 ./write_prepared_transaction_test() [0x4407b6] rocksdb::SnapshotConcurrentAccessTest_SnapshotConcurrentAccess_Test::TestBody() /home/circleci/project/utilities/transactions/write_prepared_transaction_test.cc:1244 ... [109/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 returned/aborted with exit code -6 (34462 ms) ``` - Move thread 2's work into current thread to avoid half of the thread creation cuz there is no difference in doing so. We expect this can make the thread-creation error less often, even though we can't gurantee it from happening again. Considering this is a trivial change with positive impact, it's still worth landing and monitor if it's enough to solve the problem in reality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9281 Test Plan: Before the change, repeating the test 200 times with 200 workers failed `~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1` ``` [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest [ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 ..unknown file: Failure C++ exception with description "Resource temporarily unavailable" thrown in the test body. [ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20) (11882 ms) [----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest (11882 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (11882 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20) ``` After the change: repeating the test 200 times with 200 workers didn't fail, even with repeating the "repeating" for 10 times like below `for i in {1..10}; do ~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1; done` ``` [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 ``` It does failed when repeating the test 400 times with 400 workers `~/project$ ~/gtest-parallel/gtest-parallel -r 400 -w 400 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1` ``` [1/400] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 (2928 ms) Note: Google Test filter = TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest [ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 unknown file: Failure C++ exception with description "std::bad_alloc" thrown in the test body. [ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20) (2597 ms) [----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest (2597 ms total) ``` Reviewed By: ajkr Differential Revision: D33026776 Pulled By: hx235 fbshipit-source-id: 509f57126392821e835e48396e5bf224f4f5dcac |
3 years ago |
|
Yanqin Jin
|
bd513fd075 |
Add commit marker with timestamp (#9266)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266 This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing this tag to WAL, thus it is unavailable to users. This is an ongoing effort to add user-defined timestamp support to write-committed transactions. This diff also indicates all column families that may potentially participate in the same transaction must either disable timestamp or have the same timestamp format, since `CommitWithTimestamp` tag is followed by a single byte-array denoting the commit timestamp of the transaction. We will enforce this checking in a future diff. We keep this diff small. Reviewed By: ltamasi Differential Revision: D31721350 fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6 |
3 years ago |
|
Peter Dillinger
|
aec95b8c09 |
Debug "Resource temporarily unavailable" exception in CircleCI (#9276)
Summary:
This changes write_prepared_transaction_test under CircleCI to
print a stack trace on unhandled exception, so that we can debug rare
exceptions seen in CircleCI:
[ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/24
.......unknown file: Failure
C++ exception with description "Resource temporarily unavailable" thrown in the test body.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9276
Test Plan:
manual run test with seeded 'throw', with and without
CIRCLECI=true environment variable
Reviewed By: ajkr, hx235
Differential Revision: D32996993
Pulled By: pdillinger
fbshipit-source-id: e790408ce204b676d3d84a290e41be511b203bfa
|
3 years ago |
|
Peter Dillinger
|
80ac7412b5 |
Polish/deflake BackupEngineTest.FileCollision (#9257)
Summary: Use smaller and more predictable behaviors Pull Request resolved: https://github.com/facebook/rocksdb/pull/9257 Test Plan: gtest-parallel --repeat=N ./backupable_db_test --gtest_filter=BackupEngineTest.FileCollision before (N=50) we see inconsistent sets of SST files $ find /dev/shm/rocksdb_blah/ | grep -o '/00.*sst' | grep -o '^[^_]*' | sort | uniq -c 49 /000009 3 /000010 1 /000010.sst 49 /000012 3 /000013 1 /000013.sst 49 /000015 2 /000016 1 /000016.sst 22 /000018 2 /000019 1 /000019.sst 29 /000020 11 /000021 2 /000021.sst 46 /000022 2 /000022.sst 4 /000023 1 /000023.sst 27 /000025 And after (N=5000) we see $ find /dev/shm/rocksdb_blah/ | grep -o '/00.*sst' | grep -o '^[^_]*' | sort | uniq -c 10000 /000009 10000 /000012 5000 /000015 Reviewed By: ajkr Differential Revision: D32888393 Pulled By: pdillinger fbshipit-source-id: 5bfd075b3184bb66c5613758a53f431c406e9808 |
3 years ago |
|
lgqss
|
77c7085594 |
MemTableList::TrimHistory now use allocated bytes (#9020)
Summary: Fix a bug when both max_write_buffer_size_to_maintain and max_write_buffer_number_to_maintain are 0. The bug was introduced in 6.5.0 and https://github.com/facebook/rocksdb/issues/5022. Fix https://github.com/facebook/rocksdb/issues/8371 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9020 Reviewed By: pdillinger Differential Revision: D32767084 Pulled By: ajkr fbshipit-source-id: c401ee6e2557230e892d0fe8abb4966cbd18e85f |
3 years ago |