Summary:
There is a race in SstFileManagerImpl between the ClearError() function
and CancelErrorRecovery(). The race can cause ClearError() to deref the
file system pointer after it has been freed. This is likely to occur
during process shutdown, when the order of destruction of the
DB/Env/FileSystem and SstFileManagerImpl is not deterministic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9435
Test Plan:
Reproduce the crash in a TSAN build by introducing sleeps in the code, and verify with
the fix.
Reviewed By: siying
Differential Revision: D33774696
Pulled By: anand1976
fbshipit-source-id: 643d3da31b8d2ee6d9b6db5d33327e0053ce3b83
Summary:
`db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins
data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619).
In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in
the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a
file from a given level twice.
Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause.
WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each
`WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared.
If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS`
buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can
choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then
such data will still exist in the `FaultInjectionTestFS`'s buffer.
Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead
to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`.
We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the
content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the
data appended to the file.
To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode.
This PR includes a unit test to reproduce a case when write error injection
to `WritableFile` can cause duplicate trailing entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D33033984
Pulled By: riversand963
fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
Add a new API in listener.h that notifies about IOErrors on
Read/Write/Append/Flush etc. The API reports about IOStatus, filename, Operation
name, offset and length.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9177
Test Plan: Added new unit tests
Reviewed By: anand1976
Differential Revision: D32470627
Pulled By: akankshamahajan15
fbshipit-source-id: 189a717033590ae227b3beae8b1e7e185e4cdc12
Summary:
Add the 3 read bytes counter to the Statistic, which will be used by storage tiering and get the information for files with different temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9123
Test Plan: added new testing cases.
Reviewed By: siying
Differential Revision: D32154745
Pulled By: zhichao-cao
fbshipit-source-id: b7905d6dae469a72428742364ec07b634b6f15da
Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
New classes FileStorageInfo and LiveFileStorageInfo and
'experimental' function DB::GetLiveFilesStorageInfo, which is intended
to largely replace several fragmented DB functions needed to create
checkpoints and backups.
This function is now used to create checkpoints and backups, because
it fixes many (probably not all) of the prior complexities of checkpoint
not having atomic access to DB metadata. This also ensures strong
functional test coverage of the new API. Specifically, much of the old
CheckpointImpl::CreateCustomCheckpoint has been migrated to and
updated in DBImpl::GetLiveFilesStorageInfo, with the former now
calling the latter.
Also, the class FileStorageInfo in metadata.h compatibly replaces
BackupFileInfo and serves as a new base class for SstFileMetaData.
Some old fields of SstFileMetaData are still provided (for now) but
deprecated.
Although FileStorageInfo::directory is accurate when using db_paths
and/or cf_paths, these have never been supported by Checkpoint
nor BackupEngine and still are not. This change does now detect
these cases and return NotSupported when appropriate. (More work
needed for support.)
Somehow this change broke ProgressCallbackDuringBackup, but
the progress_callback logic was dubious to begin with because it
would call the callback based on copy buffer size, not size actually
copied. Logic and test updated to track size actually copied
per-thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968
Test Plan:
tests updated.
DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl.
DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo,
including reading the data after DB close.
Added CheckpointTest.CheckpointWithDbPath (NotSupported).
Reviewed By: siying
Differential Revision: D31242045
Pulled By: pdillinger
fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0
Summary:
For tiered storage project, we need to know the block read count and read bytes of files with different temperature. Add FileIOByTemperature to IOStatsContext and collect the bytes read and read count from different temperature files through the RandomAccessFileReader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8710
Test Plan: make check, add the testing cases
Reviewed By: siying
Differential Revision: D30582400
Pulled By: zhichao-cao
fbshipit-source-id: d83173de594374fc8404af5ce93a6a9be72c7141
Summary:
Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB.
Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912
Test Plan: add new tests to lru_cache_test and pass make check.
Reviewed By: pdillinger
Differential Revision: D31452871
Pulled By: zhichao-cao
fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48
Summary:
This change adds File IO Notifications to the SequentialFileReader The SequentialFileReader is extended
with a listener parameter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8982
Test Plan:
A new test EventListenerTest::OnWALOperationTest has been added. The
test verifies that during restore the sequential file reader is called
and the notifications are fired.
Reviewed By: riversand963
Differential Revision: D31320844
Pulled By: shrfb
fbshipit-source-id: 040b24da7c010d7c14ebb5c6460fae9a19b8c168
Summary:
IOSTATS_ADD_IF_POSITIVE() doesn't seem to a macro that aims to improve performance but does the opposite. The counter to add is almost always positive so the if is just a waste. Furthermore, adding to a thread local variable seemse to be much cheaper than an if condition if branch prediction has a possibility to be wrong. Remove the macro.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8984
Test Plan: See CI completes.
Reviewed By: anand1976
Differential Revision: D31348163
fbshipit-source-id: 30af6d45e1aa8bbc09b2c046206cce6f67f4777a
Summary:
Add comments for MultiGetBlob() that input argument `offsets` must be
sorted. In addition, add assertion for this condition in debug build.
Repeat the same for RandomAccessFileReader::MultiRead().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8972
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D31253205
Pulled By: riversand963
fbshipit-source-id: 98758229b8052f3aeb319d5584026b4de2d220a2
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
Add a paranoid check where in case FileSystem layer doesn't fill the buffer but returns succeed, checksum is unlikely to match even if buffer contains a previous block. The byte modified is not useful anyway, so it isn't expect to change any behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8955
Test Plan: See existing CI to pass.
Reviewed By: pdillinger
Differential Revision: D31183966
fbshipit-source-id: dcc4de429e18131873f783b90d3be55d7eb44a1f
Summary:
Right now, if underlying read returns fewer bytes than asked for, RandomAccessFileReader::MultiRead() still returns those in the buffer to upper layer. This can be a surprise to upper layer.
This is unlikely to cause incorrect data. To cause incorrect data, checksum checking in upper layer should pass with short reads, whose chance is low.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8941
Test Plan: Run stress tests for a while
Reviewed By: anand1976
Differential Revision: D31085780
fbshipit-source-id: 999adf2d6c2712f1323d14bb68b678df59969973
Summary:
In order to populate the IOStatus up to the higher level, replace some of the Status to IOStatus.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8820
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D30967215
Pulled By: zhichao-cao
fbshipit-source-id: ccf9d5cfbd9d3de047c464aaa85f9fa43b474903
Summary:
This allows the wrapper classes to own the wrapped object and eliminates confusion as to ownership. Previously, many classes implemented their own ownership solutions. Fixes https://github.com/facebook/rocksdb/issues/8606
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8618
Reviewed By: pdillinger
Differential Revision: D30136064
Pulled By: mrambacher
fbshipit-source-id: d0bf471df8818dbb1770a86335fe98f761cca193
Summary:
Gets `Statistics` from the options associated with the `DB` undergoing backup, and populates new ticker stats with the thread-local `IOContext` read/write counters for the threads doing backup work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8819
Reviewed By: pdillinger
Differential Revision: D30779238
Pulled By: ajkr
fbshipit-source-id: 75ccafc355f90906df5cf80367f7245b985772d8
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
Prior to this change, the "wal_dir" DBOption would always be set (defaults to dbname) when the DBOptions were sanitized. Because of this setitng in the options file, it was not possible to rename/relocate a database directory after it had been created and use the existing options file.
After this change, the "wal_dir" option is only set under specific circumstances. Methods were added to the ImmutableDBOptions class to see if it is set and if it is set to something other than the dbname. Additionally, a method was added to retrieve the effective value of the WAL dir (either the option or the dbname/path).
Tests were added to the core and ldb to test that a database could be created and renamed without issue. Additional tests for various permutations of wal_dir were also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8582
Reviewed By: pdillinger, autopear
Differential Revision: D29881122
Pulled By: mrambacher
fbshipit-source-id: 67d3d033dc8813d59917b0a3fba2550c0efd6dfb
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
If we want to check whether a Status s is NoSpace() or not, we should check the subcode instread of using s==Status::NoSpace(). Fix some of the incorrect check in the ErrorHandler.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8504
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D29601764
Pulled By: zhichao-cao
fbshipit-source-id: cdab56a827891c23746bba9cbb53f169fe35f086
Summary:
In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead.
In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412
Test Plan: make check, add new testing cases.
Reviewed By: anand1976
Differential Revision: D29151545
Pulled By: zhichao-cao
fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
Summary:
Refactor kill point to one single class, rather than several extern variables. The intention was to drop unflushed data before killing to simulate some job, and I tried to a pointer to fault ingestion fs to the killing class, but it ended up with harder than I thought. Perhaps we'll need to do this in another way. But I thought the refactoring itself is good so I send it out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8241
Test Plan: make release and run crash test for a while.
Reviewed By: anand1976
Differential Revision: D28078486
fbshipit-source-id: f9182c1455f52e6851c13f88a21bade63bcec45f
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
BlockPrefetcher is used by iterators to prefetch data if they
anticipate more data to be used in future and this is valid for forward sequential
scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads
are sequential. This presents problem for MultiGet with large number of
keys when it reseeks index iterator and data block. FilePrefetchBuffer
can end up doing large readahead for reseeks as readahead size
increases exponentially once readahead is enabled. Same issue is with
BlockBasedTableIterator.
Add previous length and offset read as well in BlockPrefetcher (creates
FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to
determine if reads are sequential and then prefetch.
Update the last block read after cache hit to take reads from cache also
in account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394
Test Plan: Add new unit test case
Reviewed By: anand1976
Differential Revision: D23737617
Pulled By: akankshamahajan15
fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
To propagate the IOStatus from file reads to RocksDB read logic, some of the existing status needs to be replaced by IOStatus.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8130
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D27440188
Pulled By: zhichao-cao
fbshipit-source-id: bbe7622c2106fe4e46871d60f7c26944e5030d78
Summary:
Extend support to track blob files in SST File manager.
This PR notifies SstFileManager whenever a new blob file is created,
via OnAddFile and an obsolete blob file deleted via OnDeleteFile
and delete file via ScheduleFileDeletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D26891237
Pulled By: akankshamahajan15
fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Removed confusing, awkward, and undocumented internal API
ReadOneLine and replaced with very simple LineFileReader.
In refactoring backupable_db.cc, this has the side benefit of
removing the arbitrary cap on the size of backup metadata files.
Also added Status::MustCheck to make it easy to mark a Status as
"must check." Using this, I can ensure that after
LineFileReader::ReadLine returns false the caller checks GetStatus().
Also removed some excessive conditional compilation in status.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8026
Test Plan: added unit test, and running tests with ASSERT_STATUS_CHECKED
Reviewed By: mrambacher
Differential Revision: D26831687
Pulled By: pdillinger
fbshipit-source-id: ef749c265a7a26bb13cd44f6f0f97db2955f6f0f
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file. The readahead starts at 8KB and doubles on every
additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is
256*1024.
This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which
replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be
configured.
If max_auto_readahead_size is set 0 then no implicit auto prefetching will
be done. If max_auto_readahead_size provided is less than
8KB (which is initial readahead size used by rocksdb in case of
auto-readahead), readahead size will remain same as max_auto_readahead_size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951
Test Plan: Add new unit test case.
Reviewed By: anand1976
Differential Revision: D26568085
Pulled By: akankshamahajan15
fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.
Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851
Reviewed By: anand1976
Differential Revision: D26114816
Pulled By: mrambacher
fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
1. In IOTracing, add filename with each IOTrace record. Filename is stored in file object (Tracing Wrappers).
2. Change the logic of figuring out which additional information (file_size,
length, offset etc) needs to be store with each operation
which is different for different operations.
When new information will be added in future (depends on operation),
this change would make the future additions simple.
Logic: In IOTraceRecord, io_op_data is added and its
bitwise positions represent which additional information need
to added in the record from enum IOTraceOp. Values in IOTraceOp represent bitwise positions.
So if length and offset needs to be stored (IOTraceOp::kIOLen
is 1 and IOTraceOp::kIOOffset is 2), position 1 and 2 (from rightmost bit) will be set
and io_op_data will contain 110.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7885
Test Plan: Updated io_tracer_test and verified the trace file manually.
Reviewed By: anand1976
Differential Revision: D25982353
Pulled By: akankshamahajan15
fbshipit-source-id: ebfc5539cc0e231d7794a6b42b73f5403e360b22
Summary:
The main improvement here is to not include `.` or `..` in the results of `Env::GetChildren`. The occurrence of `.` or `..`; it is non-portable, dependent on the Operating System and the File System. See: https://www.gnu.org/software/libc/manual/html_node/Reading_002fClosing-Directory.html
There were lots of duplicate checks spread through the RocksDB codebase previously to skip `.` and `..`. This new removes the need for those at the source.
Also some minor fixes to `Env::GetChildren`:
* Improve error handling in POSIX implementation
* Remove unnecessary array allocation on Windows
* Fix struct name for Windows Non-UTF-8 API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7819
Reviewed By: ajkr
Differential Revision: D25837394
Pulled By: jay-zhuang
fbshipit-source-id: 1e137e7218d38b450af9c083f73d5357abcbba2e
Summary:
This PR does the following:
-> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems.
-> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls
-> Eliminates the public uses of the LegacyFileSystemWrapper.
With this change in place, there are effectively the following patterns of Env:
- "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system.
- Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system
- Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself.
With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction.
Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703
Reviewed By: zhichao-cao
Differential Revision: D25762190
Pulled By: anand1976
fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
Summary:
Change the StringEnv and related classes to be based on FileSystem APIs rather than the corresponding Env ones. The StringSink and StringSource classes were changed to be based on the corresponding FS file classes.
Part of a cleanup to use the newer interfaces. This change also eliminates some of the casts/wrappers to LegacyFile classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7786
Reviewed By: jay-zhuang
Differential Revision: D25761460
Pulled By: anand1976
fbshipit-source-id: 428ae8e32b3db97dbeeca08c9d3bb0d9d4d3a38f
Summary:
Previously we only had a debug assertion to check the right generator was being used for verification. However a user hit a problem in production where their factory was creating the wrong generator for some files, leading to checksum mismatches. It would have been easier to debug if we verified in optimized builds that the generator with the proper name is used. This PR adds such verification.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7824
Reviewed By: zhichao-cao
Differential Revision: D25740254
Pulled By: ajkr
fbshipit-source-id: a6231521747605021bad3231484b5d4f99f4044f
Summary:
Return the Status from TryReadFromCache() in an argument to make it easier to report prefetch errors to the user.
Tests:
make crash_test
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7816
Reviewed By: akankshamahajan15
Differential Revision: D25717222
Pulled By: anand1976
fbshipit-source-id: c320d3c12d4146bda16df78ff6927eee584c1810
anand76