Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
* Inefficient block-based filter is no longer customizable in the public
API, though (for now) can still be enabled.
* Removed deprecated FilterPolicy::CreateFilter() and
FilterPolicy::KeyMayMatch()
* Removed `rocksdb_filterpolicy_create()` from C API
* Change meaning of nullptr return from GetBuilderWithContext() from "use
block-based filter" to "generate no filter in this case." This is a
cleaner solution to the proposal in https://github.com/facebook/rocksdb/issues/8250.
* Also, when user specifies bits_per_key < 0.5, we now round this down
to "no filter" because we expect a filter with >= 80% FP rate is
unlikely to be worth the CPU cost of accessing it (esp with
cache_index_and_filter_blocks=1 or partition_filters=1).
* bits_per_key >= 0.5 and < 1.0 is still rounded up to 1.0 (for 62% FP
rate)
* This also gives us some support for configuring filters from OPTIONS
file as currently saved: `filter_policy=rocksdb.BuiltinBloomFilter`.
Opening from such an options file will enable reading filters (an
improvement) but not writing new ones. (See Customizable follow-up
below.)
* Also removed deprecated functions
* FilterBitsBuilder::CalculateNumEntry()
* FilterPolicy::GetFilterBitsBuilder()
* NewExperimentalRibbonFilterPolicy()
* Remove default implementations of
* FilterBitsBuilder::EstimateEntriesAdded()
* FilterBitsBuilder::ApproximateNumEntries()
* FilterPolicy::GetBuilderWithContext()
* Remove support for "filter_policy=experimental_ribbon" configuration
string.
* Allow "filter_policy=bloomfilter:n" without bool to discourage use of
block-based filter.
Some pieces for https://github.com/facebook/rocksdb/issues/9389
Likely follow-up (later PRs):
* Refactoring toward FilterPolicy Customizable, so that we can generate
filters with same configuration as before when configuring from options
file.
* Remove support for user enabling block-based filter (ignore `bool
use_block_based_builder`)
* Some months after this change, we could even remove read support for
block-based filter, because it is not critical to DB data
preservation.
* Make FilterBitsBuilder::FinishV2 to avoid `using
FilterBitsBuilder::Finish` mess and add support for specifying a
MemoryAllocator (for cache warming)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9501
Test Plan:
A number of obsolete tests deleted and new tests or test
cases added or updated.
Reviewed By: hx235
Differential Revision: D34008011
Pulled By: pdillinger
fbshipit-source-id: a39a720457c354e00d5b59166b686f7f59e392aa
Summary:
In RocksDB few overloads of DB::GetApproximateSizes are marked as
DEPRECATED_FUNC, and we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9458
Test Plan: CircleCI
Reviewed By: riversand963
Differential Revision: D34043791
Pulled By: akankshamahajan15
fbshipit-source-id: 815c0ad283a6627c4b241479c7d40ce03a758493
Summary:
Drop support for some old compilers by requiring C++17 standard
(or higher). See https://github.com/facebook/rocksdb/issues/9388
First modification based on this is to remove some conditional compilation in slice.h (also
better for ODR)
Also in this PR:
* Fix some Makefile formatting that seems to affect ASSERT_STATUS_CHECKED config in
some cases
* Add c_test to NON_PARALLEL_TEST in Makefile
* Fix a clang-analyze reported "potential leak" in lru_cache_test
* Better "compatibility" definition of DEFINE_uint32 for old versions of gflags
* Fix a linking problem with shared libraries in Makefile (`./random_test: error while loading shared libraries: librocksdb.so.6.29: cannot open shared object file: No such file or directory`)
* Always set ROCKSDB_SUPPORT_THREAD_LOCAL and use thread_local (from C++11)
* TODO in later PR: clean up that obsolete flag
* Fix a cosmetic typo in c.h (https://github.com/facebook/rocksdb/issues/9488)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9481
Test Plan:
CircleCI config substantially updated.
* Upgrade to latest Ubuntu images for each release
* Generally prefer Ubuntu 20, but keep a couple Ubuntu 16 builds with oldest supported
compilers, to ensure compatibility
* Remove .circleci/cat_ignore_eagain except for Ubuntu 16 builds, because this is to work
around a kernel bug that should not affect anything but Ubuntu 16.
* Remove designated gcc-9 build, because the default linux build now uses GCC 9 from
Ubuntu 20.
* Add some `apt-key add` to fix some apt "couldn't be verified" errors
* Generally drop SKIP_LINK=1; work-around no longer needed
* Generally `add-apt-repository` before `apt-get update` as manual testing indicated the
reverse might not work.
Travis:
* Use gcc-7 by default (remove specific gcc-7 and gcc-4.8 builds)
* TODO in later PR: fix s390x "Assembler messages: Error: invalid switch -march=z14" failure
AppVeyor:
* Completely dropped because we are dropping VS2015 support and CircleCI covers
VS >= 2017
Also local testing with old gflags (out of necessity when using ROCKSDB_NO_FBCODE=1).
Reviewed By: mrambacher
Differential Revision: D33946377
Pulled By: pdillinger
fbshipit-source-id: ae077c823905b45370a26c0103ada119459da6c1
Summary:
In RocksDB, this option was already marked as "NOT SUPPORTED" for a long time, and setting this option does not have any effect on the behavior of RocksDB library. Therefore, we are removing it in the preparations of the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9446
Reviewed By: ajkr
Differential Revision: D33793048
Pulled By: bjlemaire
fbshipit-source-id: 73316efdb194e90225005246673dae99e65577ae
Summary:
I feel it would be nice if we can fix this spelling error.
In `SizeApproximationOptions`, the `include_memtabtles` should be `include_memtables`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9490
Test Plan: make check
Reviewed By: hx235
Differential Revision: D33949862
Pulled By: riversand963
fbshipit-source-id: b2be67501b65d4aabb6b8df1bf25eb8d54cc1466
Summary:
ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`.
Namely, `WriteOptions` should not include information about "what-to-write", but should just
include information about "how-to-write".
According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore,
this PR removes `WriteOptions::timestamp` for compliance.
After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set
of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and
`SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity
made me reconsider doing it in another PR (maybe).
For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take
extra `timestamp` information when writing to `WriteBatch`es.
These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list.
Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to
`WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps
allocated already and multiple timestamps can be updated.
The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp
size of the default column family. This will be used to allocate space when calling APIs that do not
specify a column family handle.
Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing
some assertions about timestamp to returning Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946
Test Plan:
make check
./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8
./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0
Make sure there is no perf regression by running the following
```
./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom
```
Before this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s
```
After this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s
```
Reviewed By: ltamasi
Differential Revision: D33721359
Pulled By: riversand963
fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, https://github.com/facebook/rocksdb/pull/9345, (optional) https://github.com/facebook/rocksdb/pull/9393
**Context:**
(Quoted from pdillinger) Layers of information during new Bloom/Ribbon Filter construction in building block-based tables includes the following:
a) set of keys to add to filter
b) set of hashes to add to filter (64-bit hash applied to each key)
c) set of Bloom indices to set in filter, with duplicates
d) set of Bloom indices to set in filter, deduplicated
e) final filter and its checksum
This PR aims to detect corruption (e.g, unexpected hardware/software corruption on data structures residing in the memory for a long time) from b) to e) and leave a) as future works for application level.
- b)'s corruption is detected by verifying the xor checksum of the hash entries calculated as the entries accumulate before being added to the filter. (i.e, `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()`)
- c) - e)'s corruption is detected by verifying the hash entries indeed exists in the constructed filter by re-querying these hash entries in the filter (i.e, `FilterBitsBuilder::MaybePostVerify()`) after computing the block checksum (except for PartitionFilter, which is done right after each `FilterBitsBuilder::Finish` for impl simplicity - see code comment for more). For this stage of detection, we assume hash entries are not corrupted after checking on b) since the time interval from b) to c) is relatively short IMO.
Option to enable this feature of detection is `BlockBasedTableOptions::detect_filter_construct_corruption` which is false by default.
**Summary:**
- Implemented new functions `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()` and `FilterBitsBuilder::MaybePostVerify()`
- Ensured hash entries, final filter and banding and their [cache reservation ](https://github.com/facebook/rocksdb/issues/9073) are released properly despite corruption
- See [Filter.construction.artifacts.release.point.pdf ](https://github.com/facebook/rocksdb/files/7923487/Design.Filter.construction.artifacts.release.point.pdf) for high-level design
- Bundled and refactored hash entries's related artifact in XXPH3FilterBitsBuilder into `HashEntriesInfo` for better control on lifetime of these artifact during `SwapEntires`, `ResetEntries`
- Ensured RocksDB block-based table builder calls `FilterBitsBuilder::MaybePostVerify()` after constructing the filter by `FilterBitsBuilder::Finish()`
- When encountering such filter construction corruption, stop writing the filter content to files and mark such a block-based table building non-ok by storing the corruption status in the builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9342
Test Plan:
- Added new unit test `DBFilterConstructionCorruptionTestWithParam.DetectCorruption`
- Included this new feature in `DBFilterConstructionReserveMemoryTestWithParam.ReserveMemory` as this feature heavily touch ReserveMemory's impl
- For fallback case, I run `./filter_bench -impl=3 -detect_filter_construct_corruption=true -reserve_table_builder_memory=true -strict_capacity_limit=true -quick -runs 10 | grep 'Build avg'` to make sure nothing break.
- Added to `filter_bench`: increased filter construction time by **30%**, mostly by `MaybePostVerify()`
- FastLocalBloom
- Before change: `./filter_bench -impl=2 -quick -runs 10 | grep 'Build avg'`: **28.86643s**
- After change:
- `./filter_bench -impl=2 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless): **27.6644s (-4% perf improvement might be due to now we don't drop bloom hash entry in `AddAllEntries` along iteration but in bulk later, same with the bypassing-MaybePostVerify case below)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (expect acceptable increase): **34.41159s (+20%)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (by-passing MaybePostVerify, expect minor increase): **27.13431s (-6%)**
- Standard128Ribbon
- Before change: `./filter_bench -impl=3 -quick -runs 10 | grep 'Build avg'`: **122.5384s**
- After change:
- `./filter_bench -impl=3 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless - verified by removing MaybePostVerify under this case and found only +-1ns difference): **124.3588s (+2%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(expect acceptable increase): **159.4946s (+30%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(by-passing MaybePostVerify, expect minor increase) : **125.258s (+2%)**
- Added to `db_stress`: `make crash_test`, `./db_stress --detect_filter_construct_corruption=true`
- Manually smoke-tested: manually corrupted the filter construction in some db level tests with basic PUT and background flush. As expected, the error did get returned to users in subsequent PUT and Flush status.
Reviewed By: pdillinger
Differential Revision: D33746928
Pulled By: hx235
fbshipit-source-id: cb056426be5a7debc1cd16f23bc250f36a08ca57
Summary:
Crash test recently started showing failures as in https://github.com/facebook/rocksdb/issues/9118 but
for files created by compaction. This change applies a similar fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9480
Test Plan:
Updated / extended unit test. (Some re-arranging to do the
simpler compaction testing before this special case.)
Reviewed By: ltamasi
Differential Revision: D33909835
Pulled By: pdillinger
fbshipit-source-id: 58e4b44e4ecc2d21e4df2c2d8440ec0633aa1f6c
Summary:
Apparently setting total_order_seek=true for DB::Get was
intended to allow accurate read semantics if the current prefix
extractor doesn't match what was used to generate SST files on
disk. But since prefix_extractor was made a mutable option in 5.14.0, we
have been able to detect this case and provide the correct semantics
regardless of the total_order_seek option. Since that time, the option
has only made Get() slower in a reasonably common case: prefix_extractor
unchanged and whole_key_filtering=false.
So this change primarily removes unnecessary effect of
total_order_seek on Get. Also cleans up some related comments.
Also adds a -total_order_seek option to db_bench and canonicalizes
handling of ReadOptions in db_bench so that command line options have
the expected association with library features. (There is potential
for change in regression test behavior, but the old behavior is likely
indefensible, or some other inconsistency would need to be fixed.)
TODO in follow-up work: there should be no reason for Get() to depend on
current prefix extractor at all.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9427
Test Plan:
Unit tests updated.
Performance (using db_bench update)
Create DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12 -whole_key_filtering=0`
Test with and without `-total_order_seek` on `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=readrandom -num=10000000 -duration=40 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Before this change, total_order_seek=false: 25188 ops/sec
Before this change, total_order_seek=true: 1222 ops/sec (~20x slower)
After this change, total_order_seek=false: 24570 ops/sec
After this change, total_order_seek=true: 25012 ops/sec (indistinguishable)
Reviewed By: siying
Differential Revision: D33753458
Pulled By: pdillinger
fbshipit-source-id: bf892f34907a5e407d9c40bd4d42f0adbcbe0014
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds has been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9455
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33811664
Pulled By: hx235
fbshipit-source-id: 866859427fe710354a90f1095057f80116365ff0
Summary:
In RocksDB DBOptions::skip_log_error_on_recovery is marked as
"NOT SUPPORTED" for a long time, and setting this option does not have
any effect on the behavior of RocksDB library. Therefore, we are removing it
in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9434
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33763015
Pulled By: akankshamahajan15
fbshipit-source-id: 11f09643298da6c02d3dcdb090b996f4c3cfdd76
Summary:
In RocksDB few overloads of DB::CompactRange() are marked as DEPRECATED_FUNC, and
we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9444
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788520
Pulled By: akankshamahajan15
fbshipit-source-id: 716e0d5f227f791605d4d91626c0cbf5b4571630
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
Disallow `immutable_db_opts.use_direct_io_for_flush_and_compaction == true` and
`mutable_db_opts.writable_file_max_buffer_size == 0`, since it causes `WritableFileWriter::Append()`
to loop forever and does not make much sense in direct IO.
This combination of options itself does not make much sense: asking RocksDB to do direct IO but not allowing
RocksDB to allocate a buffer. We should detect this false combination and warn user early, no matter whether
the application is running on a platform that supports direct IO or not. In the case of platform **not** supporting
direct IO, it's ok if the user learns about this and then finds that direct IO is not supported.
One tricky thing: the constructor of `WritableFileWriter` is being used in our unit tests, and it's impossible
to return status code from constructor. Since we do not throw, I put an assertion for now. Fortunately,
the constructor is not exposed to external applications.
Closing https://github.com/facebook/rocksdb/issues/7109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9348
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D33371924
Pulled By: riversand963
fbshipit-source-id: 2a3701ab541cee23bffda8a36cdf37b2d235edfa
Summary:
This also removes the obsolete names BackupableDBOptions
and UtilityDB. API users must now use BackupEngineOptions and
DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced
`rocksdb_backup_engine_*`. Similar renaming in Java API.
In reference to https://github.com/facebook/rocksdb/issues/9389
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33780269
Pulled By: pdillinger
fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac
Summary:
MemTable::MultiGet was not considering range tombstones before
querying Bloom filter. This means range tombstones would be skipped for
keys (or prefixes) with no other entries in the memtable. This could cause
old values for a key (in SST files) to still show up until the range tombstone
covering it has been flushed.
This is fixed by essentially disabling the memtable Bloom filter when there
are any range tombstones. (This could be better optimized in the future, but
good enough for now.)
Did some other cleanup/optimization in the same code to (more than) offset
the cost of checking on range tombstones in more cases. There is now
notable improvement when memtable_whole_key_filtering and prefix_extractor
are used together (unusual), and this makes MultiGet closer to the Get
implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453
Test Plan:
new unit test added. Added memtable Bloom to crash test.
Performance testing
--------------------
Build WAL-only DB (recovers to memtable):
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000
```
Query test command, to maximize sensitivity to the changed code:
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS
```
(Note -num here is 10x larger for mostly memtable misses)
Before & after run simultaneously, average over 10 iterations per data point, ops/sec.
MWKF=0 PXS=0 (Bloom disabled)
Before: 5724844
After: 6722066
MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful)
Before: 9981319
After: 10237990
MWKF=0 PXS=8 (prefixes unique; Bloom useful)
Before: 12081715
After: 12117603
MWKF=1 PXS=0 (whole key Bloom useful)
Before: 11944354
After: 12096085
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version)
Before: 9444299
After: 11826029
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version)
Before: 11784465
After: 11778591
Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster.
Reviewed By: ajkr
Differential Revision: D33805025
Pulled By: pdillinger
fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
In RocksDB, this option was already marked as "NOT SUPPORTED" for a long time, and setting this option does not have any effect on the behavior of RocksDB library. Therefore, we are removing it in the preparations of the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9450
Reviewed By: ajkr
Differential Revision: D33802466
Pulled By: bjlemaire
fbshipit-source-id: 97570985f1400525304053476450f7ef504c0cd5
Summary:
Regexes are considered potentially problematic for use in
registering RocksDB extensions, so we are removing
ObjectLibrary::Register() and the Regex public API it depended on (now
unused).
In reference to https://github.com/facebook/rocksdb/issues/9389
Why?
* The power of Regexes can make it hard to reason about which extension
will match what. (The replacement API isn't perfect, but we are at least
"holding the line" on patterns we have seen in practice.)
* It is easy to make regexes that don't quite mean what you think they
mean, such as forgetting that the `.` in `foo.bar` can match any character
or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`.
* Some regexes and implementations can have disastrously bad
performance. This might not be much practical concern for ObjectLibray
here, but we don't want to encourage potentially dangerous further use
in production code. (Testing code is fine. See TestRegex.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33792342
Pulled By: pdillinger
fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec
Summary:
There is a race in SstFileManagerImpl between the ClearError() function
and CancelErrorRecovery(). The race can cause ClearError() to deref the
file system pointer after it has been freed. This is likely to occur
during process shutdown, when the order of destruction of the
DB/Env/FileSystem and SstFileManagerImpl is not deterministic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9435
Test Plan:
Reproduce the crash in a TSAN build by introducing sleeps in the code, and verify with
the fix.
Reviewed By: siying
Differential Revision: D33774696
Pulled By: anand1976
fbshipit-source-id: 643d3da31b8d2ee6d9b6db5d33327e0053ce3b83
Summary:
RocksDB has marked DB::AddFile() as "DEPRECATED_FUNC" for a long time, and
it will be removed in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9433
Test Plan: make check -j64; CircleCI
Reviewed By: riversand963
Differential Revision: D33763987
Pulled By: akankshamahajan15
fbshipit-source-id: a3407324479bb43689e1213e4e29d53095e7579a
Summary:
This PR moves RADOS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host RADOS support. At this point,
people can start from the example repo and fork.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9206
Test Plan:
Follow instructions in https://github.com/riversand963/rocksdb-rados-env/blob/main/README.md and build
test binary `env_librados_test` and run it.
Also, make check
Reviewed By: ajkr
Differential Revision: D33751690
Pulled By: riversand963
fbshipit-source-id: 30466c62afa9e4619847a48567ed158e62835e35
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
Loose ends relate to mmap on 32-bit systems. (Testing is more
complicated when the feature was completely disabled on 32-bit.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9386
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D33590715
Pulled By: pdillinger
fbshipit-source-id: f2637036a538a552200adee65b6765fce8cae27b
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
Closing https://github.com/facebook/rocksdb/issues/5954
fsync/fdatasync on Linux:
```
(fsync/fdatasync) includes writing through or flushing a disk cache if present.
```
However, on OS X and iOS:
```
(fsync) will flush all data from the host to the drive (i.e. the "permanent storage device"),
the drive itself may not physically write the data to the platters for quite some time and it
may be written in an out-of-order sequence.
```
Solution is to use `fcntl(F_FULLFSYNC)` on OS X so that we get the same
persistence guarantee.
According to OSX man page,
```
The F_FULLFSYNC fcntl asks the drive to flush **all** buffered data to permanent storage.
```
This suggests that it will be no faster than `fsync` on Linux, since Linux, according to its man page,
```
writing through or flushing a disk cache if present
```
It means Linux may not flush **all** data from disk cache.
This is similar to bug reports/fixes in:
- golang: https://github.com/golang/go/issues/26650
- leveldb: 296de8d5b8.
Not sure if we should fallback to fsync since we break persistence contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9356
Reviewed By: jay-zhuang
Differential Revision: D33417416
Pulled By: riversand963
fbshipit-source-id: 475548ff9c5eaccde325e0f6842694271cbc8cb7
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
Fix https://github.com/facebook/rocksdb/issues/8046 : FlushMemTable return ok but memtable does not synchronize flush. The way to fix it is to expose RecoveryError.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8173
Reviewed By: ajkr
Differential Revision: D31674552
Pulled By: jay-zhuang
fbshipit-source-id: 9d16b69ba12a196bb429332ec8224754de97773d
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Closing https://github.com/facebook/rocksdb/issues/5006
Calling `DB::DestroyColumnFamilyHandle(column_family)` with `column_family` being the return value of
`DB::DefaultColumnFamily()` will return `Status::InvalidArgument()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9347
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D33369675
Pulled By: riversand963
fbshipit-source-id: a8266a4daddf2b7a773c2dc7f3eb9a4adfb6b6dd
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9339
When writing SST file, the name, computed as `prefix_extractor->GetId()` will be written to the properties block.
When the SST is opened again in the future, `CreateFromString()` will take the name as argument and try
to create a prefix extractor object. Without this fix, the C API will pass a `Wrapper` pointer to the underlying
DB's `prefix_extractor`. `Wrapper::GetId()`, in this case, will be missing the prefix length component, causing a
prefix extractor of length 0 to be silently created and used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9343
Test Plan:
```
make c_test
./c_test
```
Reviewed By: mrambacher
Differential Revision: D33355549
Pulled By: riversand963
fbshipit-source-id: c92c3acd8be262c3bff8794b4229e42b9ee31203
Summary:
Several improvements to SimulatedHybridFileSystem:
(1) Allow a mode where all I/Os to all files simulate HDD. This can be enabled in db_bench using -simulate_hdd
(2) Latency calculation is slightly more accurate
(3) Allow to simulate more than one HDD spindles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9301
Test Plan: Run db_bench and observe the results are reasonable.
Reviewed By: jay-zhuang
Differential Revision: D33141662
fbshipit-source-id: b736e58c4ba910d06899cc9ccec79b628275f4fa
Summary:
This option causes trace records to be written in the serialized write thread. That way, the write records in the trace must follow the same order as writes that are logged to WAL and writes that are applied to the DB.
By default I left it disabled to match existing behavior. I enabled it in `db_stress`, though, as that use case requires order of write records in trace matches the order in WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9334
Test Plan:
- See if below unsynced data loss crash test can run for 24h straight. It used to crash after a few hours when reaching an unlucky trace ordering.
```
DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm /usr/local/bin/python3 -u tools/db_crashtest.py blackbox --interval=10 --max_key=100000 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --value_size_mult=33 --sync_fault_injection=1 --test_batches_snapshots=0 --duration=86400
```
Reviewed By: zhichao-cao
Differential Revision: D33301990
Pulled By: ajkr
fbshipit-source-id: 82d97559727adb4462a7af69758449c8725b22d3
Summary:
As (https://github.com/facebook/rocksdb/issues/9210) discussed, the **full_history_ts_low** is a member of CompactRangeOptions currently, which means a CF's fullHistoryTsLow is advanced only when users submit a CompactRange request.
However, users may want to advance the fllHistoryTsLow without an immediate compact.
This merge make IncreaseFullHistoryTsLow to a public API so users can advance each CF's fullHistoryTsLow seperately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9221
Reviewed By: akankshamahajan15
Differential Revision: D33201106
Pulled By: riversand963
fbshipit-source-id: 9cb1d013ba93260f72e16353e693ffee167b47ee
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
`db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins
data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619).
In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in
the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a
file from a given level twice.
Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause.
WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each
`WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared.
If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS`
buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can
choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then
such data will still exist in the `FaultInjectionTestFS`'s buffer.
Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead
to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`.
We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the
content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the
data appended to the file.
To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode.
This PR includes a unit test to reproduce a case when write error injection
to `WritableFile` can cause duplicate trailing entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D33033984
Pulled By: riversand963
fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Akanksha Mahajan
