Tag:
Branch:
Tree:
9f7801c5f1
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
2049 Commits (9f7801c5f1f76f44a9d131df2e027a9c5d8a5317)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Dillinger
|
9f7801c5f1 |
Major Cache refactoring, CPU efficiency improvement (#10975)
Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432 |
2 years ago |
|
Peter Dillinger
|
433d7e4594 |
Improve error messages for SST footer and size errors (#11009)
Summary: Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure: * Magic number error is reported first if we attempt to open an SST file and the footer is completely bad. * Footer errors are reported with affected file. * If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009 Test Plan: unit tests added, some manual Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed). Reviewed By: siying Differential Revision: D41656272 Pulled By: pdillinger fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df |
2 years ago |
|
WLeoo
|
be3a62a2e7 |
Fix an uninitialized variable warning for g++ 12.2.0 (#10995)
Summary: /home/wl/rocksdbtry/rocksdb-WL/util/bloom_test.cc: In constructor ‘rocksdb::RawFilterTester::RawFilterTester()’: /home/wl/rocksdbtry/rocksdb-WL/util/bloom_test.cc:813:40: error: member ‘rocksdb::RawFilterTester::data_’ is used uninitialized [-Werror=uninitialized] Pull Request resolved: https://github.com/facebook/rocksdb/pull/10995 Reviewed By: cbi42 Differential Revision: D41620186 Pulled By: ajkr fbshipit-source-id: a6ebd3820ef12e0af322cbfb7eb553de5bdfcb29 |
2 years ago |
|
Daniel Engel
|
55d58d91e7 |
Fix use of crc32c 3way on portable builds using MSVC (#10667)
Summary: Hello, As discussed previously in this [discussion](https://github.com/facebook/rocksdb/pull/9680#discussion_r853105163), the mentioned PR introduced a regression in portable versions that compile with MSVC - crc_3way optimization won't be used even in cases where it is supported. This PR aims to fix just that. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10667 Reviewed By: akankshamahajan15 Differential Revision: D40644592 Pulled By: ajkr fbshipit-source-id: dadbeb10d57c19800e74288258ec3b96095557dd |
2 years ago |
|
Brad Smith
|
4a6906e28c |
Add OpenBSD/arm64 support for detection of CRC32 and PMULL (#10902)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10902 Reviewed By: akankshamahajan15 Differential Revision: D40839659 Pulled By: ajkr fbshipit-source-id: 06be5919622f8cce1fce1097c5e654900bf7f8fb |
2 years ago |
|
Peter Dillinger
|
a1a1dc6659 |
Manual interventions for clang-format util/ (#10870)
Summary: Complements https://github.com/facebook/rocksdb/issues/10867 with some manual edits to avoid weird formatting or to avoid massive reformatting third party code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10870 Test Plan: `make check` etc Reviewed By: riversand963 Differential Revision: D40686526 Pulled By: pdillinger fbshipit-source-id: 6af988fe4b0a8ae4a5992ec2c3c37fe67584226e |
2 years ago |
|
Peter Dillinger
|
7fff38b1fe |
clang-format cache/ and util/ directories (#10867)
Summary: This is purely the result of running `clang-format -i` on files, except some files have been excluded for manual intervention in a separate PR Pull Request resolved: https://github.com/facebook/rocksdb/pull/10867 Test Plan: `make check`, `make check-headers`, `make format` Reviewed By: jay-zhuang Differential Revision: D40682086 Pulled By: pdillinger fbshipit-source-id: 8673d978553ab99b516da7fb63ba0b82523337f8 |
2 years ago |
|
sdong
|
5d17297b76 |
Make UserComparatorWrapper not Customizable (#10837)
Summary: Right now UserComparatorWrapper is a Customizable object, although it is not, which introduces some intialization overhead for the object. In some benchmarks, it shows up in CPU profiling. Make it not configurable by defining most functions needed by UserComparatorWrapper to an interface and implement the interface. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10837 Test Plan: Make sure existing tests pass Reviewed By: pdillinger Differential Revision: D40528511 fbshipit-source-id: 70eaac89ecd55401a26e8ed32abbc413a9617c62 |
2 years ago |
|
Peter Dillinger
|
e466173d5c |
Print stack traces on frozen tests in CI (#10828)
Summary: Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off. For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828 Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI Reviewed By: hx235 Differential Revision: D40447634 Pulled By: pdillinger fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1 |
2 years ago |
|
Yanqin Jin
|
d2578ab195 |
Add DECLARE_uint32 to gflags compatibility (#10729)
Summary: Older versions of gflags do not have `DEFINE_uint32` and `DECLARE_uint32`. In util/gflag_compat.h, we already add a hack for `DEFINE_uint32`. This PR adds a hack for `DECLARE_uint32`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10729 Test Plan: ROCKSDB_NO_FBCODE=1 make V=1 -j16 db_stress make check Resolves https://github.com/facebook/rocksdb/issues/10704 Reviewed By: pdillinger Differential Revision: D39789183 Pulled By: riversand963 fbshipit-source-id: a58747e0163dcf55dd762733aa5c40d8f0ae70a6 |
2 years ago |
|
Andrew Kryczka
|
36dec11bc6 |
Disable RateLimiterTest.Rate with valgrind (#10637)
Summary: Example valgrind flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/18073/workflows/3794e569-45cb-4621-a2b4-df1dcdf5cb19/jobs/475569 ``` util/rate_limiter_test.cc:358 Expected equality of these values: samples_at_minimum Which is: 9 samples Which is: 10 ``` Some other runs of `RateLimiterTest.Rate` already skip this check due to its reliance on a minimum execution speed. We know valgrind slows execution a lot so can disable the check in that case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10637 Reviewed By: cbi42 Differential Revision: D39251350 Pulled By: ajkr fbshipit-source-id: 41ae1ea4cd91992ea57df902f9f7fd6d182a5932 |
2 years ago |
|
gitbw95
|
6cd8133035 |
Fix an import issue in fbcode. (#10604)
Summary: This should fix an import issue detected in meta internal tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10604 Test Plan: Unit Tests. Reviewed By: hx235 Differential Revision: D39120414 Pulled By: gitbw95 fbshipit-source-id: dbd016d7f47b9f54aab5ea61e8d3cd79734f46af |
2 years ago |
|
Jay Zhuang
|
d9e71fb2c5 |
Fix periodic_task unable to re-register the same task type (#10379)
Summary: Timer has a limitation that it cannot re-register a task with the same name, because the cancel only mark the task as invalid and wait for the Timer thread to clean it up later, before the task is cleaned up, the same task name cannot be added. Which makes the task option update likely to fail, which basically cancel and re-register the same task name. Change the periodic task name to a random unique id and store it in periodic_task_scheduler. Also refactor the `periodic_work` to `periodic_task` to make each job function as a `task`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379 Test Plan: unittests Reviewed By: ajkr Differential Revision: D38000615 Pulled By: jay-zhuang fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e |
2 years ago |
|
Ryan Mack
|
06f73d2575 |
Fix autovector::emplace_back return type for C++17 (#10542)
Summary: C++17 changes emplace_back API to return the new object. Needed to compile rocksdb on recent compilers. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10542 Reviewed By: hx235 Differential Revision: D38896019 Pulled By: ajkr fbshipit-source-id: cd7ddf34c0dcd449ecedc41e89a37b3a270a5603 |
2 years ago |
|
Peter Dillinger
|
86a1e3e0e7 |
Derive cache keys from SST unique IDs (#10394)
Summary: ... so that cache keys can be derived from DB manifest data before reading the file from storage--so that every part of the file can potentially go in a persistent cache. See updated comments in cache_key.cc for technical details. Importantly, the new cache key encoding uses some fancy but efficient math to pack data into the cache key without depending on the sizes of the various pieces. This simplifies some existing code creating cache keys, like cache warming before the file size is known. This should provide us an essentially permanent mapping between SST unique IDs and base cache keys, with the ability to "upgrade" SST unique IDs (and thus cache keys) with new SST format_versions. These cache keys are of similar, perhaps indistinguishable quality to the previous generation. Before this change (see "corrected" days between collision): ``` ./cache_bench -stress_cache_key -sck_keep_bits=43 18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected) ``` After this change (keep 43 bits, up through 50, to validate "trajectory" is ok on "corrected" days between collision): ``` 19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected) 16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected) 15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected) 15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected) 15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected) 15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected) 15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected) 15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected) ``` However, the change does modify (probably weaken) the "guaranteed unique" promise from this > SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86 to this (see https://github.com/facebook/rocksdb/issues/10388) > With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits I don't think this is a practical concern, though. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394 Test Plan: unit tests updated, see simulation results above Reviewed By: jay-zhuang Differential Revision: D38667529 Pulled By: pdillinger fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba |
2 years ago |
|
sdong
|
9277569ba3 |
Add some missing headers (#10519)
Summary: Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519 Reviewed By: jay-zhuang Differential Revision: D38603291 fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1 |
2 years ago |
|
sdong
|
911c0208b9 |
WritableFileWriter tries to skip operations after failure (#10489)
Summary: A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489 Test Plan: Fix existing unit tests and watch crash tests for a while. Reviewed By: anand1976 Differential Revision: D38473277 fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366 |
2 years ago |
|
sdong
|
aec28ebae6 |
db_bench -use_stderr_info_logger to print timestamp (#10435)
Summary: Right now db_bench -use_stderr_info_logger would redirect RocksDB info logging to stderr but no timetamp is printed out. Add timestamp to there. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10435 Test Plan: Run "db_bench -use_stderr_info_logger" Reviewed By: riversand963 Differential Revision: D38258699 fbshipit-source-id: 3fee6eb1205127b923bc6a660f86bd2742519aec |
2 years ago |
|
Jay Zhuang
|
fcccc412d7 |
Remove Travis CI (#10407)
Summary: Travis CI is depreciated and haven't been maintained for some time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10407 Reviewed By: ajkr Differential Revision: D38078382 Pulled By: jay-zhuang fbshipit-source-id: f42057f2f41f722bdce56bf195f67a94835191fb |
2 years ago |
|
Andrew Kryczka
|
e576f2ab19 |
Fix race conditions in GenericRateLimiter (#10374)
Summary: Made locking strict for all accesses of `GenericRateLimiter` internal state. `SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation. The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374 Reviewed By: pdillinger Differential Revision: D37906367 Pulled By: ajkr fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5 |
2 years ago |
|
Andrew Kryczka
|
25cc564ff7 |
Make RateLimiter not Customizable (#10378)
Summary: (PR created for informational/testing purposes only.) - Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()` - Benefit over #10374 is eliminating race conditions with Configurable framework. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378 Reviewed By: pdillinger Differential Revision: D37914865 fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30 |
2 years ago |
|
Jay Zhuang
|
a3acf2ef87 |
Add seqno to time mapping (#10338)
Summary: Which will be used for tiered storage to preclude hot data from compacting to the cold tier (the last level). Internally, adding seqno to time mapping. A periodic_task is scheduled to record the current_seqno -> current_time in certain cadence. When memtable flush, the mapping informaiton is stored in sstable property. During compaction, the mapping information are merged and get the approximate time of sequence number, which is used to determine if a key is recently inserted or not and preclude it from the last level if it's recently inserted (within the `preclude_last_level_data_seconds`). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338 Test Plan: CI Reviewed By: siying Differential Revision: D37810187 Pulled By: jay-zhuang fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f |
2 years ago |
|
sdong
|
c8b20d469d |
Make InternalKeyComparator not configurable (#10342)
Summary: InternalKeyComparator is an internal class which is a simple wrapper of Comparator. https://github.com/facebook/rocksdb/pull/8336 made Comparator customizeable. As a side effect, internal key comparator was made configurable too. This introduces overhead to this simple wrapper. For example, every InternalKeyComparator will have an std::vector attached to it, which consumes memory and possible allocation overhead too. We remove InternalKeyComparator from being customizable by making InternalKeyComparator not a subclass of Comparator. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10342 Test Plan: Run existing CI tests and make sure it doesn't fail Reviewed By: riversand963 Differential Revision: D37771351 fbshipit-source-id: 917256ee04b2796ed82974549c734fb6c4d8ccee |
2 years ago |
|
Changyu Bi
|
5f9fe7f21e |
Added WAL compression checksum (#10319)
Summary: Enabled zstd checksum flag in StreamingCompress so that WAL (de)compreression is protected by a checksum per compression frame. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10319 Test Plan: - `make check` - WAL perf: average ops/sec over 10 runs is 161226 pre PR and 159635 post PR (1% drop). ``` sudo TEST_TMPDIR=/dev/shm/memtable_write ./db_bench_checksum -benchmarks=fillseq -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=10 -wal_compression=zstd ``` Reviewed By: ajkr Differential Revision: D37673311 Pulled By: cbi42 fbshipit-source-id: 9f34a3bfc2a82e5c80b1ec63bb339a7465108ec9 |
2 years ago |
|
zczhu
|
96206531bc |
Support reservation in thread pool (#10278)
Summary: Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278 Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions. Reviewed By: hx235 Differential Revision: D37640946 Pulled By: littlepig2013 fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367 |
2 years ago |
|
Akanksha Mahajan
|
2acbf386a3 |
Provide support for direct_reads with async_io (#10197)
Summary: Provide support for use_direct_reads with async_io. TestPlan: - Updated unit tests - db_bench: Results in https://github.com/facebook/rocksdb/pull/10197#issuecomment-1159239420 - db_stress ``` export CRASH_TEST_EXT_ARGS=" --async_io=1 --use_direct_reads=1" make crash_test -j ``` - Ran db_bench on previous RocksDB version before any async_io implementation (as there have many changes in different PRs in this area) https://github.com/facebook/rocksdb/pull/10197#issuecomment-1160781563. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10197 Reviewed By: anand1976 Differential Revision: D37255646 Pulled By: akankshamahajan15 fbshipit-source-id: fec61ae15bf4d625f79dea56e4f86e0e307ba920 |
2 years ago |
|
Bo Wang
|
8e63d90ff8 |
Pass rate_limiter_priority through filter block reader functions to FS (#10251)
Summary: With https://github.com/facebook/rocksdb/pull/9996 , we can pass the rate_limiter_priority to FS for most cases. This PR is to update the code path for filter block reader. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10251 Test Plan: Current unit tests should pass. Reviewed By: pdillinger Differential Revision: D37427667 Pulled By: gitbw95 fbshipit-source-id: 1ce5b759b136efe4cfa48a6b97e2f837ff087433 |
2 years ago |
|
Bo Wang
|
c073ed7601 |
Fix typo in comments and code (#10233)
Summary: Fix typo in comments and code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10233 Test Plan: Existing unit tests should pass. Reviewed By: jay-zhuang, anand1976 Differential Revision: D37356702 Pulled By: gitbw95 fbshipit-source-id: 32c019adcc6dcc95a9882b38147a310091368e51 |
2 years ago |
|
Peter Dillinger
|
1aac814578 |
Use optimized folly DistributedMutex in LRUCache when available (#10179)
Summary: folly DistributedMutex is faster than standard mutexes though imposes some static obligations on usage. See https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h for details. Here we use this alternative for our Cache implementations (especially LRUCache) for better locking performance, when RocksDB is compiled with folly. Also added information about which distributed mutex implementation is being used to cache_bench output and to DB LOG. Intended follow-up: * Use DMutex in more places, perhaps improving API to support non-scoped locking * Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently) Credit: Thanks Siying for reminding me about this line of work that was previously left unfinished. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179 Test Plan: for correctness, existing tests. CircleCI config updated. Also Meta-internal buck build updated. For performance, ran simultaneous before & after cache_bench. Out of three comparison runs, the middle improvement to ops/sec was +21%: Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode compiler) ``` Complete in 20.201 s; Rough parallel ops/sec = 1584062 Thread ops/sec = 107176 Operation latency (ns): Count: 32000000 Average: 9257.9421 StdDev: 122412.04 Min: 134 Median: 3623.0493 Max: 56918500 Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63 ``` New: (add USE_FOLLY=1) ``` Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%) Thread ops/sec = 135487 Operation latency (ns): Count: 32000000 Average: 7304.9294 StdDev: 108530.28 Min: 132 Median: 3777.6012 Max: 91030902 Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83 ``` Reviewed By: anand1976 Differential Revision: D37182983 Pulled By: pdillinger fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1 |
2 years ago |
|
Peter Dillinger
|
126c223714 |
Remove deprecated block-based filter (#10184)
Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80 |
2 years ago |
|
Peter Dillinger
|
94329ae4ec |
Use only ASCII in source files (#10164)
Summary: Fix existing usage of non-ASCII and add a check to prevent future use. Added `-n` option to greps to provide line numbers. Alternative to https://github.com/facebook/rocksdb/issues/10147 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10164 Test Plan: used new checker to find & fix cases, manually check db_bench output is preserved Reviewed By: akankshamahajan15 Differential Revision: D37148792 Pulled By: pdillinger fbshipit-source-id: 68c8b57e7ab829369540d532590bf756938855c7 |
2 years ago |
|
Peter Dillinger
|
ad135f3ffd |
Document design/specification bugs with auto_prefix_mode (#10144)
Summary: auto_prefix_mode is designed to use prefix filtering in a particular "safe" set of cases where the upper bound and the seek key have different prefixes: where the upper bound is the "same length immediate successor". These conditions are not sufficient to guarantee the same iteration results as total_order_seek if the DB contains "short" keys, less than the "full" (maximum) prefix length. We are not simply disabling the optimization in these successor cases because it is likely that users are essentially getting what they want out of existing usage. Especially if users are constructing successor bounds with the intention of doing a prefix-bounded seek, the existing behavior is more expected than the total_order_seek behavior. Consequently, for now we reconcile the bad specification of behavior by documenting the existing mismatch with total_order_seek. A closely related issue affects hypothetical comparators like ReverseBytewiseComparator: if they "correctly" implement IsSameLengthImmediateSuccessor, auto_prefix_mode could omit more entries (other than "short" keys noted above). Luckily, the built-in ReverseBytewiseComparator has an "incorrect" implementation of IsSameLengthImmediateSuccessor that effectively prevents prefix optimization and, thus, the bug. This is now documented as a new constraint on IsSameLengthImmediateSuccessor, and the implementation tweaked to be simply "safe" rather than "incorrect". This change also includes unit test updates to demonstrate the above issues. (Test was cleaned up for readability and simplicity.) Intended follow-up: * Tweak documented axioms for prefix_extractor (more details then) * Consider some sort of fix for this case. I don't know what that would look like without breaking the performance of existing code. Perhaps if all keys in an SST file have prefixes that are "full length," we can track that fact and use it to allow optimization with the "same length immediate successor", but that would only apply to new files. * Consider a better system of specifying prefix bounds Pull Request resolved: https://github.com/facebook/rocksdb/pull/10144 Test Plan: test updates included Reviewed By: siying Differential Revision: D37052710 Pulled By: pdillinger fbshipit-source-id: 5f63b7d65f3f214e4b143e0f9aa1749527c587db |
2 years ago |
|
Levi Tamasi
|
e9c74bc474 |
Add wide column serialization primitives (#9915)
Summary: The patch adds some low-level logic that can be used to serialize/deserialize a sorted vector of wide columns to/from a simple binary searchable string representation. Currently, there is no user-facing API; this will be implemented in subsequent stages. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9915 Test Plan: `make check` Reviewed By: siying Differential Revision: D35978076 Pulled By: ltamasi fbshipit-source-id: 33f5f6628ec3bcd8c8beab363b1978ac047a8788 |
2 years ago |
|
Jaepil Jeong
|
4eb7b35f6d |
Fix compile error in Clang 13 (#10033)
Summary:
This PR fixes the following compilation error in Clang 13, which was tested on macOS 12.4.
```
❯ ninja clean && ninja
[1/1] Cleaning all built files...
Cleaning... 0 files.
[198/315] Building CXX object CMakeFiles/rocksdb.dir/util/cleanable.cc.o
FAILED: CMakeFiles/rocksdb.dir/util/cleanable.cc.o
ccache /opt/homebrew/opt/llvm/bin/clang++ -DGFLAGS=1 -DGFLAGS_IS_A_DLL=0 -DHAVE_FULLFSYNC -DJEMALLOC_NO_DEMANGLE -DLZ4 -DOS_MACOSX -DROCKSDB_JEMALLOC -DROCKSDB_LIB_IO_POSIX -DROCKSDB_NO_DYNAMIC_EXTENSION -DROCKSDB_PLATFORM_POSIX -DSNAPPY -DTBB -DZLIB -DZSTD -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/include -I/Users/jaepil/app/include -I/opt/homebrew/include -I/opt/homebrew/opt/llvm/include -W -Wextra -Wall -pthread -Wsign-compare -Wshadow -Wno-unused-parameter -Wno-unused-variable -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -Wno-strict-aliasing -Wno-invalid-offsetof -fno-omit-frame-pointer -momit-leaf-frame-pointer -march=armv8-a+crc+crypto -Wno-unused-function -Werror -O3 -DNDEBUG -DROCKSDB_USE_RTTI -arch arm64 -isysroot /Library/Developer/CommandLineTools/SDKs/MacOSX12.3.sdk -std=gnu++17 -MD -MT CMakeFiles/rocksdb.dir/util/cleanable.cc.o -MF CMakeFiles/rocksdb.dir/util/cleanable.cc.o.d -o CMakeFiles/rocksdb.dir/util/cleanable.cc.o -c /Users/jaepil/work/deepsearch/deps/cpp/rocksdb/util/cleanable.cc
/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/util/cleanable.cc:24:65: error: no member named 'move' in namespace 'std'
Cleanable::Cleanable(Cleanable&& other) noexcept { *this = std::move(other); }
~~~~~^
/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/util/cleanable.cc:126:16: error: no member named 'move' in namespace 'std'
*this = std::move(from);
~~~~~^
2 errors generated.
[209/315] Building CXX object CMakeFiles/rocksdb.dir/tools/block_cache_analyzer/block_cache_trace_analyzer.cc.o
ninja: build stopped: subcommand failed.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10033
Reviewed By: jay-zhuang
Differential Revision: D36580562
Pulled By: ajkr
fbshipit-source-id: 0f6b241d186ed528ad62d259af2857d2c2b4ded1
|
3 years ago |
|
tagliavini
|
6c50082654 |
Remove code that only compiles for Visual Studio versions older than 2015 (#10065)
Summary: There are currently some preprocessor checks that assume support for Visual Studio versions older than 2015 (i.e., 0 < _MSC_VER < 1900), although we don't support them any more. We removed all code that only compiles on those older versions, except third-party/ files. The ROCKSDB_NOEXCEPT symbol is now obsolete, since it now always gets replaced by noexcept. We removed it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10065 Reviewed By: pdillinger Differential Revision: D36721901 Pulled By: guidotag fbshipit-source-id: a2892d365ef53cce44a0a7d90dd6b72ee9b5e5f2 |
3 years ago |
|
Levi Tamasi
|
af7ae912e2 |
Fix potential ambiguities in/around port/sys_time.h (#10045)
Summary:
There are some time-related POSIX APIs that are not available on Windows
(e.g. `localtime_r`), which we have worked around by providing our own
implementations in `port/sys_time.h`. This workaround actually relies on
some ambiguity: on Windows, a call to `localtime_r` calls
`ROCKSDB_NAMESPACE::port::localtime_r` (which is pulled into
`ROCKSDB_NAMESPACE` by a using-declaration), while on other platforms
it calls the global `localtime_r`. This works fine as long as there is only one
candidate function; however, it breaks down when there is more than one
`localtime_r` visible in a scope.
The patch fixes this by introducing `ROCKSDB_NAMESPACE::port::{TimeVal, GetTimeOfDay, LocalTimeR}`
to eliminate any ambiguity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10045
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D36639372
Pulled By: ltamasi
fbshipit-source-id: fc13dbfa421b7c8918111a6d9e24ce77e91a7c50
|
3 years ago |
|
Changyu Bi
|
8515bd50c9 |
Support read rate-limiting in SequentialFileReader (#9973)
Summary: Added rate limiter and read rate-limiting support to SequentialFileReader. I've updated call sites to SequentialFileReader::Read with appropriate IO priority (or left a TODO and specified IO_TOTAL for now). The PR is separated into four commits: the first one added the rate-limiting support, but with some fixes in the unit test since the number of request bytes from rate limiter in SequentialFileReader are not accurate (there is overcharge at EOF). The second commit fixed this by allowing SequentialFileReader to check file size and determine how many bytes are left in the file to read. The third commit added benchmark related code. The fourth commit moved the logic of using file size to avoid overcharging the rate limiter into backup engine (the main user of SequentialFileReader). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9973 Test Plan: - `make check`, backup_engine_test covers usage of SequentialFileReader with rate limiter. - Run db_bench to check if rate limiting is throttling as expected: Verified that reads and writes are together throttled at 2MB/s, and at 0.2MB chunks that are 100ms apart. - Set up: `./db_bench --benchmarks=fillrandom -db=/dev/shm/test_rocksdb` - Benchmark: ``` strace -ttfe read,write ./db_bench --benchmarks=backup -db=/dev/shm/test_rocksdb --backup_rate_limit=2097152 --use_existing_db strace -ttfe read,write ./db_bench --benchmarks=restore -db=/dev/shm/test_rocksdb --restore_rate_limit=2097152 --use_existing_db ``` - db bench on backup and restore to ensure no performance regression. - backup (avg over 50 runs): pre-change: 1.90443e+06 micros/op; post-change: 1.8993e+06 micros/op (improve by 0.2%) - restore (avg over 50 runs): pre-change: 1.79105e+06 micros/op; post-change: 1.78192e+06 micros/op (improve by 0.5%) ``` # Set up ./db_bench --benchmarks=fillrandom -db=/tmp/test_rocksdb -num=10000000 # benchmark TEST_TMPDIR=/tmp/test_rocksdb NUM_RUN=50 for ((j=0;j<$NUM_RUN;j++)) do ./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=backup -use_existing_db | egrep 'backup' # Restore #./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=restore -use_existing_db done > rate_limit.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' rate_limit.txt >> rate_limit_2.txt ``` Reviewed By: hx235 Differential Revision: D36327418 Pulled By: cbi42 fbshipit-source-id: e75d4307cff815945482df5ba630c1e88d064691 |
3 years ago |
|
anand76
|
8e9d9156b0 |
Fix fbcode internal build failure (#10041)
Summary: The build failed due to different namespaces for coroutines (std::experimental vs std) based on compiler version. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10041 Reviewed By: ltamasi Differential Revision: D36617212 Pulled By: anand1976 fbshipit-source-id: dfb25320788d32969317d5651173059e2cbd8bd5 |
3 years ago |
|
Changyu Bi
|
cc23b46da1 |
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857)
Summary:
An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857
Test Plan:
#### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data:
Set up: change the parameter [here](
|
3 years ago |
|
anand76
|
57997ddaaf |
Multi file concurrency in MultiGet using coroutines and async IO (#9968)
Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696 |
3 years ago |
|
Yaroslav Stepanchuk
|
0a43061f8d |
Remove ROCKSDB_SUPPORT_THREAD_LOCAL define because it's a part of C++11 (#10015)
Summary: ROCKSDB_SUPPORT_THREAD_LOCAL definition has been removed. `__thread`(#define) has been replaced with `thread_local`(C++ keyword) across the code base. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10015 Reviewed By: siying Differential Revision: D36485491 Pulled By: pdillinger fbshipit-source-id: 6522d212514ee190b90b4e2750c80c7e34013c78 |
3 years ago |
|
gitbw95
|
05c678e135 |
Set Write rate limiter priority dynamically and pass it to FS (#9988)
Summary: ### Context: Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users. From the RocksDB perspective, there can be two kinds of rate limiters, the internal (native) one and the external one. - The internal (native) rate limiter is introduced in [the wiki](https://github.com/facebook/rocksdb/wiki/Rate-Limiter). Currently, only IO_LOW and IO_HIGH are used and they are set statically. - For the external rate limiter, in FSWritableFile functions, IOOptions is open for end users to set and get rate_limiter_priority for their own rate limiter. Currently, RocksDB doesn’t pass the rate_limiter_priority through IOOptions to the file system. ### Solution During the User Read, Flush write, Compaction read/write, the WriteController is used to determine whether DB writes are stalled or slowed down. The rate limiter priority (Env::IOPriority) can be determined accordingly. We decided to always pass the priority in IOOptions. What the file system does with it should be a contract between the user and the file system. We would like to set the rate limiter priority at file level, since the Flush/Compaction job level may be too coarse with multiple files and block IO level is too granular. **This PR is for the Write path.** The **Write:** dynamic priority for different state are listed as follows: | State | Normal | Delayed | Stalled | | ----- | ------ | ------- | ------- | | Flush | IO_HIGH | IO_USER | IO_USER | | Compaction | IO_LOW | IO_USER | IO_USER | Flush and Compaction writes share the same call path through BlockBaseTableWriter, WritableFileWriter, and FSWritableFile. When a new FSWritableFile object is created, its io_priority_ can be set dynamically based on the state of the WriteController. In WritableFileWriter, before the call sites of FSWritableFile functions, WritableFileWriter::DecideRateLimiterPriority() determines the rate_limiter_priority. The options (IOOptions) argument of FSWritableFile functions will be updated with the rate_limiter_priority. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9988 Test Plan: Add unit tests. Reviewed By: anand1976 Differential Revision: D36395159 Pulled By: gitbw95 fbshipit-source-id: a7c82fc29759139a1a07ec46c37dbf7e753474cf |
3 years ago |
|
Hui Xiao
|
3573558ec5 |
Rewrite memory-charging feature's option API (#9926)
Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af |
3 years ago |
|
mrambacher
|
b11ff347b4 |
Use STATIC_AVOID_DESTRUCTION for static objects with non-trivial destructors (#9958)
Summary: Changed the static objects that had non-trivial destructors to use the STATIC_AVOID_DESTRUCTION construct. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9958 Reviewed By: pdillinger Differential Revision: D36442982 Pulled By: mrambacher fbshipit-source-id: 029d47b1374d30d198bfede369a4c0ae7a4eb519 |
3 years ago |
|
Qingyou Meng
|
7b55b50839 |
util/ribbon_alg.h: removed duplicate word "vector" (#9216)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9216 Reviewed By: riversand963 Differential Revision: D36219934 fbshipit-source-id: 8253b4e3eacceb8b040eeaa45cd5a50570a4eba6 |
3 years ago |
|
sdong
|
736a7b5433 |
Remove own ToString() (#9955)
Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471 |
3 years ago |
|
sdong
|
49628c9a83 |
Use std::numeric_limits<> (#9954)
Summary: Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954 Test Plan: See CI Runs. Reviewed By: riversand963 Differential Revision: D36173954 fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0 |
3 years ago |
|
Hui Xiao
|
de537dcaf1 |
Fix a comment in RateLimiter::RequestToken (#9933)
Summary: **Context/Summary:** - As titled Pull Request resolved: https://github.com/facebook/rocksdb/pull/9933 Test Plan: - No code change Reviewed By: ajkr Differential Revision: D36086544 Pulled By: hx235 fbshipit-source-id: 2bdd19f67e45df1e3af4121b0c1a5e866a57826d |
3 years ago |
|
Peter Dillinger
|
9d0cae7104 |
Eliminate unnecessary (slow) block cache Ref()ing in MultiGet (#9899)
Summary: When MultiGet() determines that multiple query keys can be served by examining the same data block in block cache (one Lookup()), each PinnableSlice referring to data in that data block needs to hold on to the block in cache so that they can be released at arbitrary times by the API user. Historically this is accomplished with extra calls to Ref() on the Handle from Lookup(), with each PinnableSlice cleanup calling Release() on the Handle, but this creates extra contention on the block cache for the extra Ref()s and Release()es, especially because they hit the same cache shard repeatedly. In the case of merge operands (possibly more cases?), the problem was compounded by doing an extra Ref()+eventual Release() for each merge operand for a key reusing a block (which could be the same key!), rather than one Ref() per key. (Note: the non-shared case with `biter` was already one per key.) This change optimizes MultiGet not to rely on these extra, contentious Ref()+Release() calls by instead, in the shared block case, wrapping the cache Release() cleanup in a refcounted object referenced by the PinnableSlices, such that after the last wrapped reference is released, the cache entry is Release()ed. Relaxed atomic refcounts should be much faster than mutex-guarded Ref() and Release(), and much less prone to a performance cliff when MultiGet() does a lot of block sharing. Note that I did not use std::shared_ptr, because that would require an extra indirection object (shared_ptr itself new/delete) in order to associate a ref increment/decrement with a Cleanable cleanup entry. (If I assumed it was the size of two pointers, I could do some hackery to make it work without the extra indirection, but that's too fragile.) Some details: * Fixed (removed) extra block cache tracing entries in cases of cache entry reuse in MultiGet, but it's likely that in some other cases traces are missing (XXX comment inserted) * Moved existing implementations for cleanable.h from iterator.cc to new cleanable.cc * Improved API comments on Cleanable * Added a public SharedCleanablePtr class to cleanable.h in case others could benefit from the same pattern (potentially many Cleanables and/or smart pointers referencing a shared Cleanable) * Add a typedef for MultiGetContext::Mask * Some variable renaming for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899 Test Plan: Added unit tests for SharedCleanablePtr. Greatly enhanced ability of existing tests to detect cache use-after-free. * Release PinnableSlices from MultiGet as they are read rather than in bulk (in db_test_util wrapper). * In ASAN build, default to using a trivially small LRUCache for block_cache so that entries are immediately erased when unreferenced. (Updated two tests that depend on caching.) New ASAN testsuite running time seems OK to me. If I introduce a bug into my implementation where we skip the shared cleanups on block reuse, ASAN detects the bug in `db_basic_test *MultiGet*`. If I remove either of the above testing enhancements, the bug is not detected. Consider for follow-up work: manipulate or randomize ordering of PinnableSlice use and release from MultiGet db_test_util wrapper. But in typical cases, natural ordering gives pretty good functional coverage. Performance test: In the extreme (but possible) case of MultiGetting the same or adjacent keys in a batch, throughput can improve by an order of magnitude. `./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200` Before ops/sec, num=5: 1,384,394 Before ops/sec, num=500: 6,423,720 After ops/sec, num=500: 10,658,794 After ops/sec, num=5: 16,027,257 Also note that previously, with high parallelism, having query keys concentrated in a single block was worse than spreading them out a bit. Now concentrated in a single block is faster than spread out, which is hopefully consistent with natural expectation. Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12): Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec Possibly better, possibly in the noise. Reviewed By: anand1976 Differential Revision: D35907003 Pulled By: pdillinger fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e |
3 years ago |
|
Jonathan Albrecht
|
844a35108b |
Fix minimum libzstd version that supports ZSTD_STREAMING (#9841)
Summary: The minimum libzstd version that has `ZSTD_compressStream2` is 1.4.0 so only define ZSTD_STREAMING in that case. Fixes building on Ubuntu 18.04 which has libzstd 1.3.3 as its repository version. Fixes https://github.com/facebook/rocksdb/issues/9795 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9841 Test Plan: Build and test on Ubuntu 18.04 with: apt-get install libsnappy-dev zlib1g-dev libbz2-dev liblz4-dev \ libzstd-dev libgflags-dev g++ make curl Reviewed By: ajkr Differential Revision: D35648738 Pulled By: jay-zhuang fbshipit-source-id: 2a9e969bcc17a7dc10172f3817283409de885811 |
3 years ago |