Tag:
Branch:
Tree:
a2eea18fc9
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
5106 Commits (a2eea18fc9b4260443562be18bdbeba62cb70265)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Jay Zhuang
|
5a5f21c489 |
Allow the last level data moving up to penultimate level (#10782)
Summary: Lock the penultimate level for the whole compaction inputs range, so any key in that compaction is safe to move up from the last level to penultimate level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10782 Reviewed By: siying Differential Revision: D40231540 Pulled By: siying fbshipit-source-id: ca115cc8b4018b35d797329fa85a19b06cc8c13e |
2 years ago |
|
Peter Dillinger
|
2d0380adbe |
Allow manifest fix-up without requiring prior state (#10796)
Summary: This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state. Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796 Test Plan: tests added/updated, that fail before the change(s) and now pass Reviewed By: jay-zhuang Differential Revision: D40232645 Pulled By: jay-zhuang fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be |
2 years ago |
|
Hui Xiao
|
f6a0065d54 |
Allow Flush(sync=true) not supported in DB::Open() and db_stress (#10784)
Summary: **Context:** https://github.com/facebook/rocksdb/pull/10698 made `Flush(sync=true)` required for` DB::Open()` (to pass the original but now deleted assertion `impl->TEST_WALBufferIsEmpty()` under `manual_wal_flush=true`, see https://github.com/facebook/rocksdb/pull/10698 summary for more ) as well as db_stress to pass. However RocksDB users may not implement SyncWAL() (used inFlush(sync=true)). Therefore we replace such in DB::Open and db_stress in this PR and align with https://github.com/facebook/rocksdb/blob/main/db/db_impl/db_impl_open.cc#L1883-L1887 and https://github.com/facebook/rocksdb/blob/main/db_stress_tool/db_stress_test_base.cc#L847-L849 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10784 Test Plan: make check Reviewed By: anand1976 Differential Revision: D40193354 Pulled By: anand1976 fbshipit-source-id: e80d53880799ae01bdd717641d07997d3bfe2b54 |
2 years ago |
|
akankshamahajan
|
ebf8c454fd |
Provide support for async_io with tailing iterators (#10781)
Summary: Provide support for async_io if ReadOptions.tailing is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781 Test Plan: - Update unit tests - Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1 Reviewed By: anand1976 Differential Revision: D40128882 Pulled By: anand1976 fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01 |
2 years ago |
|
Changyu Bi
|
a6ce1955b1 |
Fix flaky test ShuttingDownNotBlockStalledWrites (#10800)
Summary: DBTest::ShuttingDownNotBlockStalledWrites is flaky, added new sync point dependency to fix it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10800 Test Plan: gtest-parallel --repeat=1000 ./db_test --gtest_filter="*ShuttingDownNotBlockStalledWrites" Reviewed By: jay-zhuang Differential Revision: D40239116 Pulled By: jay-zhuang fbshipit-source-id: 8c2d7e7df58f202d287bd9f5c9b60b7eff270d0c |
2 years ago |
|
Jay Zhuang
|
62ba5c8034 |
Deflake DBBloomFilterTest.OptimizeFiltersForHits (#10792)
Summary: The test may fail because the L5 files may only cover small portion of the whole key range. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10792 Test Plan: ``` gtest-parallel ./db_bloom_filter_test --gtest_filter=DBBloomFilterTest.OptimizeFiltersForHits -r 1000 -w 100 ``` Reviewed By: siying Differential Revision: D40217600 Pulled By: siying fbshipit-source-id: 18db549184bccf5e513eaa7e31ab17385b71ef71 |
2 years ago |
|
Qingping Wang
|
a45e6878f3 |
fix issue 10751 (#10765)
Summary: Fix https://github.com/facebook/rocksdb/issues/10751 where a stalled write could be blocked forever when DB shutdown. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10765 Reviewed By: ajkr Differential Revision: D40110069 Pulled By: ajkr fbshipit-source-id: 598c05777db9be85913a0a85e421b3295ecdff5e |
2 years ago |
|
Jay Zhuang
|
c401f285c3 |
Add option `preserve_internal_time_seconds` to preserve the time info (#10747)
Summary: Add option `preserve_internal_time_seconds` to preserve the internal time information. It's mostly for the migration of the existing data to tiered storage ( `preclude_last_level_data_seconds`). When the tiering feature is just enabled, the existing data won't have the time information to decide if it's hot or cold. Enabling this feature will start collect and preserve the time information for the new data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747 Reviewed By: siying Differential Revision: D39910141 Pulled By: siying fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138 |
2 years ago |
|
Yanqin Jin
|
11943e8b27 |
Exclude timestamp when checking compaction boundaries (#10787)
Summary: When checking if a range [start, end) overlaps with a compaction whose range is [start1, end1), always exclude timestamp from start, end, start1 and end1, otherwise some versions of one user key may be compacted to bottommost layer while others remain in the original level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10787 Test Plan: make check Reviewed By: ltamasi Differential Revision: D40187672 Pulled By: ltamasi fbshipit-source-id: 81226267fd3e33ffa79665c62abadf2ebec45496 |
2 years ago |
|
Jay Zhuang
|
23fa5b7789 |
Use `sstableKeyCompare()` for compaction output boundary check (#10763)
Summary: To make it consistent with the compaction picker which uses the `sstableKeyCompare()` to pick the overlap files. For example, without this change, it may cut L1 files like: ``` L1: [2-21] [22-30] L2: [1-10] [21-30] ``` Because "21" on L1 is smaller than "21" on L2. But for compaction, these 2 files are overlapped. `sstableKeyCompare()` also take range delete into consideration which may cut file for the same key. It also makes the `max_compaction_bytes` calculation more accurate for cases like above, the overlapped bytes was under estimated. Also make sure the 2 keys won't be splitted to 2 files because of reaching `max_compaction_bytes`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10763 Reviewed By: cbi42 Differential Revision: D39971904 Pulled By: cbi42 fbshipit-source-id: bcc309e9c3dc61a8f50667a6f633e6132c0154a8 |
2 years ago |
|
Levi Tamasi
|
d6d8c007ff |
Verify columns in NonBatchedOpsStressTest::VerifyDb (#10783)
Summary: As the first step of covering the wide-column functionality of iterators in our stress tests, the patch adds verification logic to `NonBatchedOpsStressTest::VerifyDb` that checks whether the iterator's value and columns are in sync. Note: I plan to update the other types of stress tests and add similar verification for prefix scans etc. in separate PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10783 Test Plan: Ran some simple blackbox crash tests. Reviewed By: riversand963 Differential Revision: D40152370 Pulled By: riversand963 fbshipit-source-id: 8f9d17d7af5da58ccf1bd2057cab53cc9645ac35 |
2 years ago |
|
Yanqin Jin
|
4d82b94896 |
Sanitize min_write_buffer_number_to_merge to 1 with atomic_flush (#10773)
Summary: With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773 Test Plan: Reproduce: D39993203 has detailed steps. Run the test with and without the fix. Reviewed By: cbi42 Differential Revision: D40077955 Pulled By: cbi42 fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240 |
2 years ago |
|
Changyu Bi
|
eca47fb696 |
Ignore kBottommostFiles compaction logic when allow_ingest_behind (#10767)
Summary: fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767 Test Plan: Added a unit test to reproduce the compaction loop. Reviewed By: ajkr Differential Revision: D40031861 Pulled By: ajkr fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b |
2 years ago |
|
Changyu Bi
|
ffde463a5f |
Cleanup SuperVersion in Iterator::Refresh() (#10770)
Summary: Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770 Test Plan: added a unit test to reproduce the issue. Reviewed By: ajkr Differential Revision: D40063809 Pulled By: ajkr fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2 |
2 years ago |
|
Yanqin Jin
|
edda219fc3 |
Manual flush with `wait=false` should not stall when writes stopped (#10001)
Summary: When `FlushOptions::wait` is set to false, manual flush should not stall forever. If the database has already stopped writes, then the thread calling `DB::Flush()` with `FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`. To prevent this, we should do a check at the beginning and return `TryAgain()` Resolves: https://github.com/facebook/rocksdb/issues/9892 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001 Reviewed By: siying Differential Revision: D36422303 Pulled By: siying fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a |
2 years ago |
|
Jay Zhuang
|
f007ad8b4f |
RoundRobin TTL compaction (#10725)
Summary: For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725 Reviewed By: ajkr Differential Revision: D39771069 Pulled By: jay-zhuang fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd |
2 years ago |
|
Peter Dillinger
|
5f4391dda2 |
Some clean-up of secondary cache (#10730)
Summary: This is intended as a step toward possibly separating secondary cache integration from the Cache implementation as much as possible, to (hopefully) minimize code duplication in adding secondary cache support to HyperClockCache. * Major clarifications to API docs of secondary cache compatible parts of Cache. For example, previously the docs seemed to suggest that Wait() was not needed if IsReady()==true. And it wasn't clear what operations were actually supported on pending handles. * Add some assertions related to these requirements, such as that we don't Release() before Wait() (which would leak a secondary cache handle). * Fix a leaky abstraction with dummy handles, which are supposed to be internal to the Cache. Previously, these just used value=nullptr to indicate dummy handle, which meant that they could be confused with legitimate value=nullptr cases like cache reservations. Also fixed blob_source_test which was relying on this leaky abstraction. * Drop "incomplete" terminology, which was another name for "pending". * Split handle flags into "mutable" ones requiring mutex and "immutable" ones which do not. Because of single-threaded access to pending handles, the "Is Pending" flag can be in the "immutable" set. This allows removal of a TSAN work-around and removing a mutex acquire-release in IsReady(). * Remove some unnecessary handling of charges on handles of failed lookups. Keeping total_charge=0 means no special handling needed. (Removed one unnecessary mutex acquire/release.) * Simplify handling of dummy handle in Lookup(). There is no need to explicitly Ref & Release w/Erase if we generally overwrite the dummy anyway. (Removed one mutex acquire/release, a call to Release().) Intended follow-up: * Clarify APIs in secondary_cache.h * Doesn't SecondaryCacheResultHandle transfer ownership of the Value() on success (implementations should not release the value in destructor)? * Does Wait() need to be called if IsReady() == true? (This would be different from Cache.) * Do Value() and Size() have undefined behavior if IsReady() == false? * Why have a custom API for what is essentially a std::future<std::pair<void*, size_t>>? * Improve unit testing of standalone handle case * Apparent null `e` bug in `free_standalone_handle` case * Clean up secondary cache testing in lru_cache_test * Why does TestSecondaryCacheResultHandle hold on to a Cache::Handle? * Why does TestSecondaryCacheResultHandle::Wait() do nothing? Shouldn't it establish the post-condition IsReady() == true? * (Assuming that is sorted out...) Shouldn't TestSecondaryCache::WaitAll simply wait on each handle in order (no casting required)? How about making that the default implementation? * Why does TestSecondaryCacheResultHandle::Size() check Value() first? If the API is intended to be returning 0 before IsReady(), then that is weird but should at least be documented. Otherwise, if it's intended to be undefined behavior, we should assert IsReady(). * Consider replacing "standalone" and "dummy" entries with a single kind of "weak" entry that deletes its value when it reaches zero refs. Suppose you are using compressed secondary cache and have two iterators at similar places. It will probably common for one iterator to have standalone results pinned (out of cache) when the second iterator needs those same blocks and has to re-load them from secondary cache and duplicate the memory. Combining the dummy and the standalone should fix this. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10730 Test Plan: existing tests (minor update), and crash test with sanitizers and secondary cache Performance test for any regressions in LRUCache (primary only): Create DB with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 ``` Test before & after (run at same time) with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X100] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=233000000 -duration 30 -threads=16 ``` Before: readrandom [AVG 100 runs] : 22234 (± 63) ops/sec; 1.6 (± 0.0) MB/sec After: readrandom [AVG 100 runs] : 22197 (± 64) ops/sec; 1.6 (± 0.0) MB/sec That's within 0.2%, which is not significant by the confidence intervals. Reviewed By: anand1976 Differential Revision: D39826010 Pulled By: anand1976 fbshipit-source-id: 3202b4a91f673231c97648ae070e502ae16b0f44 |
2 years ago |
|
akankshamahajan
|
ae0f9c3339 |
Add new property in IOOptions to skip recursing through directories and list only files during GetChildren. (#10668)
Summary: Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files. By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open. Provided support in PosixFileSystem to use "do_not_recurse". TestPlan: - Existing tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668 Reviewed By: anand1976 Differential Revision: D39471683 Pulled By: akankshamahajan15 fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f |
2 years ago |
|
Changyu Bi
|
9f2363f4c4 |
User-defined timestamp support for `DeleteRange()` (#10661)
Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2 |
2 years ago |
|
Hui Xiao
|
3b8164912e |
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698)
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
|
2 years ago |
|
Changyu Bi
|
fd71a82f4f |
Use actual file size when checking max_compaction_size (#10728)
Summary: currently, there are places in compaction_picker where we add up `compensated_file_size` of files being compacted and limit the sum to be under `max_compaction_bytes`. `compensated_file_size` contains booster for point tombstones and should be used only for determining file's compaction priority. This PR replaces `compensated_file_size` with actual file size in such places. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10728 Test Plan: CI Reviewed By: ajkr Differential Revision: D39789427 Pulled By: cbi42 fbshipit-source-id: 1f89fb6c0159c53bf01d8dc783f465959f442c81 |
2 years ago |
|
Jay Zhuang
|
f3cc66632b |
Align compaction output file boundaries to the next level ones (#10655)
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
|
2 years ago |
|
Changyu Bi
|
df492791b6 |
Fix segfault in Iterator::Refresh() (#10739)
Summary: when a new internal iterator is constructed during iterator refresh, pointer to the previous memtable range tombstone iterator was not cleared. This could cause segfault for future `Refresh()` calls when they try to free the memtable range tombstones. This PR fixes this issue. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10739 Test Plan: added a unit test in db_range_del_test.cc to reproduce this issue. Reviewed By: ajkr, riversand963 Differential Revision: D39825283 Pulled By: cbi42 fbshipit-source-id: 3b59a2b73865aed39e28cdd5c1b57eed7991b94c |
2 years ago |
|
Yanqin Jin
|
07249fea8f |
Fix DBImpl::GetLatestSequenceForKey() for Merge (#10724)
Summary: Currently, without this fix, DBImpl::GetLatestSequenceForKey() may not return the latest sequence number for merge operands of the key. This can cause conflict checking during optimistic transaction commit phase to fail. Fix it by always returning the latest sequence number of the key, also considering range tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10724 Test Plan: make check Reviewed By: cbi42 Differential Revision: D39756847 Pulled By: riversand963 fbshipit-source-id: 0764c3dd4cb24960b37e18adccc6e7feed0e6876 |
2 years ago |
|
walter
|
1b351fd9fe |
Add C API to set avoid_unnecessary_blocking_io option (#10693)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10693 Reviewed By: riversand963 Differential Revision: D39668399 Pulled By: ajkr fbshipit-source-id: 66d46e5104c49d235a14e8df8eec3af285ab9752 |
2 years ago |
|
Peter Dillinger
|
ef443cead4 |
Refactor to avoid confusing "raw block" (#10408)
Summary: We have a lot of confusing code because of mixed, sometimes completely opposite uses of of the term "raw block" or "raw contents", sometimes within the same source file. For example, in `BlockBasedTableBuilder`, `raw_block_contents` and `raw_size` generally referred to uncompressed block contents and size, while `WriteRawBlock` referred to writing a block that is already compressed if it is going to be. Meanwhile, in `BlockBasedTable`, `raw_block_contents` either referred to a (maybe compressed) block with trailer, or a maybe compressed block maybe without trailer. (Note: left as follow-up work to use C++ typing to better sort out the various kinds of BlockContents.) This change primarily tries to apply some consistent terminology around the kinds of block representations, avoiding the unclear "raw". (Any meaning of "raw" assumes some bias toward the storage layer or toward the logical data layer.) Preferred terminology: * **Serialized block** - bytes that go into storage. For block-based table (usually the case) this includes the block trailer. WART: block `size` may or may not include the trailer; need to be clear about whether it does or not. * **Maybe compressed block** - like a serialized block, but without the trailer (or no promise of including a trailer). Must be accompanied by a CompressionType. * **Uncompressed block** - "payload" bytes that are either stored with no compression, used as input to compression function, or result of decompression function. * **Parsed block** - an in-memory form of a block in block cache, as it is used by the table reader. Different C++ types are used depending on the block type (see block_like_traits.h). Other refactorings: * Misc corrections/improvements of internal API comments * Remove a few misleading / unhelpful / redundant comments. * Use move semantics in some places to simplify contracts * Use better parameter names to indicate which parameters are used for outputs * Remove some extraneous `extern` * Various clean-ups to `CacheDumperImpl` (mostly unnecessary code) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408 Test Plan: existing tests Reviewed By: akankshamahajan15 Differential Revision: D38172617 Pulled By: pdillinger fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c |
2 years ago |
|
anand76
|
fb9a025892 |
Fix platform 10 build with folly (#10708)
Summary: Change the library order in PLATFORM_LDFLAGS to enable fbcode platform 10 build with folly. This PR also has a few fixes for platform 10 compiler errors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10708 Test Plan: ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_COROUTINES=1 make -j64 check ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_FOLLY=1 make -j64 check Reviewed By: ajkr Differential Revision: D39666590 Pulled By: anand1976 fbshipit-source-id: 256a1127ef561399cd6299a6a392ca29bd68ca44 |
2 years ago |
|
Changyu Bi
|
013305af13 |
Fix potential memory leak in ArenaWrappedDBIter::Refresh() (#10716)
Summary: Fix potential memory leak in ArenaWrappedDBIter::Refresh() introduced in https://github.com/facebook/rocksdb/issues/10705. See https://github.com/facebook/rocksdb/pull/10705#discussion_r976765905 for detail. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10716 Test Plan: make check Reviewed By: ajkr Differential Revision: D39698561 Pulled By: cbi42 fbshipit-source-id: dc0d0c6e3878eaa84f87623fbe4916b9b08b077a |
2 years ago |
|
Changyu Bi
|
749b849a34 |
Fix memtable-only iterator regression (#10705)
Summary: when there is a single memtable without range tombstones and no SST files in the database, DBIter should wrap memtable iterator directly. Currently we create a merging iterator on top of the memtable iterator, and have DBIter wrap around it. This causes iterator regression and this PR fixes this issue. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10705 Test Plan: - `make check` - Performance: - Set up: `./db_bench -benchmarks=filluniquerandom -write_buffer_size=$((1 << 30)) -num=10000` - Benchmark: `./db_bench -benchmarks=seekrandom -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=$((1 << 30)) -num=10000 -threads=16 -duration=60 -seek_nexts=$seek_nexts` ``` seek_nexts main op/sec https://github.com/facebook/rocksdb/issues/10705 RocksDB v7.6 0 5746568 5749033 5786180 30 2411690 3006466 2837699 1000 102556 128902 124667 ``` Reviewed By: ajkr Differential Revision: D39644221 Pulled By: cbi42 fbshipit-source-id: 8063ff611ba31b0e5670041da3927c8c54b2097d |
2 years ago |
|
Jay Zhuang
|
92df36985d |
Deflake CompactionServiceTest.BasicCompactions (#10697)
Summary: The background compaction may still running while the test end, which would cause ASAN stack-use-after-scope error. Explicitly close the DB before test end. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10697 Test Plan: able to reproduce with: ``` gtest-parallel ./compaction_service_test --gtest_filter=CompactionServiceTest.BasicCompactions -r 10000 -w 100 ``` Reviewed By: gitbw95 Differential Revision: D39590974 Pulled By: jay-zhuang fbshipit-source-id: da264b2e6a276afbda7d5ff7adb9d7b8d4213d90 |
2 years ago |
|
anand76
|
01ebe8a5f7 |
Fix invalid reference in MultiGet due to vector resizing (#10702)
Summary: Fix invalid reference in MultiGet due to resizing of the ```batches``` autovector. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10702 Test Plan: Run asan crash test Reviewed By: riversand963 Differential Revision: D39608753 Pulled By: anand1976 fbshipit-source-id: 7a9e7fc6f436f08eb22003d0e6b0e1e4dcdc1a2a |
2 years ago |
|
anand76
|
e053ccde99 |
Fix an incorrect MultiGet assertion (#10695)
Summary: The assertion in ```FilePickerMultiGet::ReplaceRange()``` was incorrect. The function should only be called to replace the range after finishing the search in the current level, which is indicated by ```hit_file_ == nullptr``` i.e no more overlapping files in this level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10695 Reviewed By: gitbw95 Differential Revision: D39583217 Pulled By: anand1976 fbshipit-source-id: d4cedfb2b62fb9f3a083e9848a403ae6342f0519 |
2 years ago |
|
Peter Dillinger
|
0f91c72adc |
Call experimental new clock cache HyperClockCache (#10684)
Summary: This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons: * We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache." * We want to highlight the key feature: it's fast (especially under parallel load) * Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements. * We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.) Some API detail: * To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`. * Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated. For performance tests see https://github.com/facebook/rocksdb/pull/10626 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684 Test Plan: no interesting functional changes; tests updated Reviewed By: anand1976 Differential Revision: D39547800 Pulled By: pdillinger fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf |
2 years ago |
|
Peter Dillinger
|
5724348689 |
Revamp, optimize new experimental clock cache (#10626)
Summary:
* Consolidates most metadata into a single word per slot so that more
can be accomplished with a single atomic update. In the common case,
Lookup was previously about 4 atomic updates, now just 1 atomic update.
Common case Release was previously 1 atomic read + 1 atomic update,
now just 1 atomic update.
* Eliminate spins / waits / yields, which likely threaten some "lock free"
benefits. Compare-exchange loops are only used in explicit Erase, and
strict_capacity_limit=true Insert. Eviction uses opportunistic compare-
exchange.
* Relaxes some aggressiveness and guarantees. For example,
* Duplicate Inserts will sometimes go undetected and the shadow duplicate
will age out with eviction.
* In many cases, the older Inserted value for a given cache key will be kept
(i.e. Insert does not support overwrite).
* Entries explicitly erased (rather than evicted) might not be freed
immediately in some rare cases.
* With strict_capacity_limit=false, capacity limit is not tracked/enforced as
precisely as LRUCache, but is self-correcting and should only deviate by a
very small number of extra or fewer entries.
* Use smaller "computed default" number of cache shards in many cases,
because benefits to larger usage tracking / eviction pools outweigh the small
cost of more lock-free atomic contention. The improvement in CPU and I/O
is dramatic in some limit-memory cases.
* Even without the sharding change, the eviction algorithm is likely more
effective than LRU overall because it's more stateful, even though the
"hot path" state tracking for it is essentially free with ref counting. It
is like a generalized CLOCK with aging (see code comments). I don't have
performance numbers showing a specific improvement, but in theory, for a
Poisson access pattern to each block, keeping some state allows better
estimation of time to next access (Poisson interval) than strict LRU. The
bounded randomness in CLOCK can also reduce "cliff" effect for repeated
range scans approaching and exceeding cache size.
## Hot path algorithm comparison
Rough descriptions, focusing on number and kind of atomic operations:
* Old `Lookup()` (2-5 atomic updates per probe):
```
Loop:
Increment internal ref count at slot
If possible hit:
Check flags atomic (and non-atomic fields)
If cache hit:
Three distinct updates to 'flags' atomic
Increment refs for internal-to-external
Return
Decrement internal ref count
while atomic read 'displacements' > 0
```
* New `Lookup()` (1-2 atomic updates per probe):
```
Loop:
Increment acquire counter in meta word (optimistic)
If visible entry (already read meta word):
If match (read non-atomic fields):
Return
Else:
Decrement acquire counter in meta word
Else if invisible entry (rare, already read meta word):
Decrement acquire counter in meta word
while atomic read 'displacements' > 0
```
* Old `Release()` (1 atomic update, conditional on atomic read, rarely more):
```
Read atomic ref count
If last reference and invisible (rare):
Use CAS etc. to remove
Return
Else:
Decrement ref count
```
* New `Release()` (1 unconditional atomic update, rarely more):
```
Increment release counter in meta word
If last reference and invisible (rare):
Use CAS etc. to remove
Return
```
## Performance test setup
Build DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=${CACHE_MB}000000 -duration 60 -threads=$THREADS -statistics
```
Numbers on a single socket Skylake Xeon system with 48 hardware threads, DEBUG_LEVEL=0 PORTABLE=0. Very similar story on a dual socket system with 80 hardware threads. Using (every 2nd) Fibonacci MB cache sizes to sample the territory between powers of two. Configurations:
base: LRUCache before this change, but with db_bench change to default cache_numshardbits=-1 (instead of fixed at 6)
folly: LRUCache before this change, with folly enabled (distributed mutex) but on an old compiler (sorry)
gt_clock: experimental ClockCache before this change
new_clock: experimental ClockCache with this change
## Performance test results
First test "hot path" read performance, with block cache large enough for whole DB:
4181MB 1thread base -> kops/s: 47.761
4181MB 1thread folly -> kops/s: 45.877
4181MB 1thread gt_clock -> kops/s: 51.092
4181MB 1thread new_clock -> kops/s: 53.944
4181MB 16thread base -> kops/s: 284.567
4181MB 16thread folly -> kops/s: 249.015
4181MB 16thread gt_clock -> kops/s: 743.762
4181MB 16thread new_clock -> kops/s: 861.821
4181MB 24thread base -> kops/s: 303.415
4181MB 24thread folly -> kops/s: 266.548
4181MB 24thread gt_clock -> kops/s: 975.706
4181MB 24thread new_clock -> kops/s: 1205.64 (~= 24 * 53.944)
4181MB 32thread base -> kops/s: 311.251
4181MB 32thread folly -> kops/s: 274.952
4181MB 32thread gt_clock -> kops/s: 1045.98
4181MB 32thread new_clock -> kops/s: 1370.38
4181MB 48thread base -> kops/s: 310.504
4181MB 48thread folly -> kops/s: 268.322
4181MB 48thread gt_clock -> kops/s: 1195.65
4181MB 48thread new_clock -> kops/s: 1604.85 (~= 24 * 1.25 * 53.944)
4181MB 64thread base -> kops/s: 307.839
4181MB 64thread folly -> kops/s: 272.172
4181MB 64thread gt_clock -> kops/s: 1204.47
4181MB 64thread new_clock -> kops/s: 1615.37
4181MB 128thread base -> kops/s: 310.934
4181MB 128thread folly -> kops/s: 267.468
4181MB 128thread gt_clock -> kops/s: 1188.75
4181MB 128thread new_clock -> kops/s: 1595.46
Whether we have just one thread on a quiet system or an overload of threads, the new version wins every time in thousand-ops per second, sometimes dramatically so. Mutex-based implementation quickly becomes contention-limited. New clock cache shows essentially perfect scaling up to number of physical cores (24), and then each hyperthreaded core adding about 1/4 the throughput of an additional physical core (see 48 thread case). Block cache miss rates (omitted above) are negligible across the board. With partitioned instead of full filters, the maximum speed-up vs. base is more like 2.5x rather than 5x.
Now test a large block cache with low miss ratio, but some eviction is required:
1597MB 1thread base -> kops/s: 46.603 io_bytes/op: 1584.63 miss_ratio: 0.0201066 max_rss_mb: 1589.23
1597MB 1thread folly -> kops/s: 45.079 io_bytes/op: 1530.03 miss_ratio: 0.019872 max_rss_mb: 1550.43
1597MB 1thread gt_clock -> kops/s: 48.711 io_bytes/op: 1566.63 miss_ratio: 0.0198923 max_rss_mb: 1691.4
1597MB 1thread new_clock -> kops/s: 51.531 io_bytes/op: 1589.07 miss_ratio: 0.0201969 max_rss_mb: 1583.56
1597MB 32thread base -> kops/s: 301.174 io_bytes/op: 1439.52 miss_ratio: 0.0184218 max_rss_mb: 1656.59
1597MB 32thread folly -> kops/s: 273.09 io_bytes/op: 1375.12 miss_ratio: 0.0180002 max_rss_mb: 1586.8
1597MB 32thread gt_clock -> kops/s: 904.497 io_bytes/op: 1411.29 miss_ratio: 0.0179934 max_rss_mb: 1775.89
1597MB 32thread new_clock -> kops/s: 1182.59 io_bytes/op: 1440.77 miss_ratio: 0.0185449 max_rss_mb: 1636.45
1597MB 128thread base -> kops/s: 309.91 io_bytes/op: 1438.25 miss_ratio: 0.018399 max_rss_mb: 1689.98
1597MB 128thread folly -> kops/s: 267.605 io_bytes/op: 1394.16 miss_ratio: 0.0180286 max_rss_mb: 1631.91
1597MB 128thread gt_clock -> kops/s: 691.518 io_bytes/op: 9056.73 miss_ratio: 0.0186572 max_rss_mb: 1982.26
1597MB 128thread new_clock -> kops/s: 1406.12 io_bytes/op: 1440.82 miss_ratio: 0.0185463 max_rss_mb: 1685.63
610MB 1thread base -> kops/s: 45.511 io_bytes/op: 2279.61 miss_ratio: 0.0290528 max_rss_mb: 615.137
610MB 1thread folly -> kops/s: 43.386 io_bytes/op: 2217.29 miss_ratio: 0.0289282 max_rss_mb: 600.996
610MB 1thread gt_clock -> kops/s: 46.207 io_bytes/op: 2275.51 miss_ratio: 0.0290057 max_rss_mb: 637.934
610MB 1thread new_clock -> kops/s: 48.879 io_bytes/op: 2283.1 miss_ratio: 0.0291253 max_rss_mb: 613.5
610MB 32thread base -> kops/s: 306.59 io_bytes/op: 2250 miss_ratio: 0.0288721 max_rss_mb: 683.402
610MB 32thread folly -> kops/s: 269.176 io_bytes/op: 2187.86 miss_ratio: 0.0286938 max_rss_mb: 628.742
610MB 32thread gt_clock -> kops/s: 855.097 io_bytes/op: 2279.26 miss_ratio: 0.0288009 max_rss_mb: 733.062
610MB 32thread new_clock -> kops/s: 1121.47 io_bytes/op: 2244.29 miss_ratio: 0.0289046 max_rss_mb: 666.453
610MB 128thread base -> kops/s: 305.079 io_bytes/op: 2252.43 miss_ratio: 0.0288884 max_rss_mb: 723.457
610MB 128thread folly -> kops/s: 269.583 io_bytes/op: 2204.58 miss_ratio: 0.0287001 max_rss_mb: 676.426
610MB 128thread gt_clock -> kops/s: 53.298 io_bytes/op: 8128.98 miss_ratio: 0.0292452 max_rss_mb: 956.273
610MB 128thread new_clock -> kops/s: 1301.09 io_bytes/op: 2246.04 miss_ratio: 0.0289171 max_rss_mb: 788.812
The new version is still winning every time, sometimes dramatically so, and we can tell from the maximum resident memory numbers (which contain some noise, by the way) that the new cache is not cheating on memory usage. IMPORTANT: The previous generation experimental clock cache appears to hit a serious bottleneck in the higher thread count configurations, presumably due to some of its waiting functionality. (The same bottleneck is not seen with partitioned index+filters.)
Now we consider even smaller cache sizes, with higher miss ratios, eviction work, etc.
233MB 1thread base -> kops/s: 10.557 io_bytes/op: 227040 miss_ratio: 0.0403105 max_rss_mb: 247.371
233MB 1thread folly -> kops/s: 15.348 io_bytes/op: 112007 miss_ratio: 0.0372238 max_rss_mb: 245.293
233MB 1thread gt_clock -> kops/s: 6.365 io_bytes/op: 244854 miss_ratio: 0.0413873 max_rss_mb: 259.844
233MB 1thread new_clock -> kops/s: 47.501 io_bytes/op: 2591.93 miss_ratio: 0.0330989 max_rss_mb: 242.461
233MB 32thread base -> kops/s: 96.498 io_bytes/op: 363379 miss_ratio: 0.0459966 max_rss_mb: 479.227
233MB 32thread folly -> kops/s: 109.95 io_bytes/op: 314799 miss_ratio: 0.0450032 max_rss_mb: 400.738
233MB 32thread gt_clock -> kops/s: 2.353 io_bytes/op: 385397 miss_ratio: 0.048445 max_rss_mb: 500.688
233MB 32thread new_clock -> kops/s: 1088.95 io_bytes/op: 2567.02 miss_ratio: 0.0330593 max_rss_mb: 303.402
233MB 128thread base -> kops/s: 84.302 io_bytes/op: 378020 miss_ratio: 0.0466558 max_rss_mb: 1051.84
233MB 128thread folly -> kops/s: 89.921 io_bytes/op: 338242 miss_ratio: 0.0460309 max_rss_mb: 812.785
233MB 128thread gt_clock -> kops/s: 2.588 io_bytes/op: 462833 miss_ratio: 0.0509158 max_rss_mb: 1109.94
233MB 128thread new_clock -> kops/s: 1299.26 io_bytes/op: 2565.94 miss_ratio: 0.0330531 max_rss_mb: 361.016
89MB 1thread base -> kops/s: 0.574 io_bytes/op: 5.35977e+06 miss_ratio: 0.274427 max_rss_mb: 91.3086
89MB 1thread folly -> kops/s: 0.578 io_bytes/op: 5.16549e+06 miss_ratio: 0.27276 max_rss_mb: 96.8984
89MB 1thread gt_clock -> kops/s: 0.512 io_bytes/op: 4.13111e+06 miss_ratio: 0.242817 max_rss_mb: 119.441
89MB 1thread new_clock -> kops/s: 48.172 io_bytes/op: 2709.76 miss_ratio: 0.0346162 max_rss_mb: 100.754
89MB 32thread base -> kops/s: 5.779 io_bytes/op: 6.14192e+06 miss_ratio: 0.320399 max_rss_mb: 311.812
89MB 32thread folly -> kops/s: 5.601 io_bytes/op: 5.83838e+06 miss_ratio: 0.313123 max_rss_mb: 252.418
89MB 32thread gt_clock -> kops/s: 0.77 io_bytes/op: 3.99236e+06 miss_ratio: 0.236296 max_rss_mb: 396.422
89MB 32thread new_clock -> kops/s: 1064.97 io_bytes/op: 2687.23 miss_ratio: 0.0346134 max_rss_mb: 155.293
89MB 128thread base -> kops/s: 4.959 io_bytes/op: 6.20297e+06 miss_ratio: 0.323945 max_rss_mb: 823.43
89MB 128thread folly -> kops/s: 4.962 io_bytes/op: 5.9601e+06 miss_ratio: 0.319857 max_rss_mb: 626.824
89MB 128thread gt_clock -> kops/s: 1.009 io_bytes/op: 4.1083e+06 miss_ratio: 0.242512 max_rss_mb: 1095.32
89MB 128thread new_clock -> kops/s: 1224.39 io_bytes/op: 2688.2 miss_ratio: 0.0346207 max_rss_mb: 218.223
^ Now something interesting has happened: the new clock cache has gained a dramatic lead in the single-threaded case, and this is because the cache is so small, and full filters are so big, that dividing the cache into 64 shards leads to significant (random) imbalances in cache shards and excessive churn in imbalanced shards. This new clock cache only uses two shards for this configuration, and that helps to ensure that entries are part of a sufficiently big pool that their eviction order resembles the single-shard order. (This effect is not seen with partitioned index+filters.)
Even smaller cache size:
34MB 1thread base -> kops/s: 0.198 io_bytes/op: 1.65342e+07 miss_ratio: 0.939466 max_rss_mb: 48.6914
34MB 1thread folly -> kops/s: 0.201 io_bytes/op: 1.63416e+07 miss_ratio: 0.939081 max_rss_mb: 45.3281
34MB 1thread gt_clock -> kops/s: 0.448 io_bytes/op: 4.43957e+06 miss_ratio: 0.266749 max_rss_mb: 100.523
34MB 1thread new_clock -> kops/s: 1.055 io_bytes/op: 1.85439e+06 miss_ratio: 0.107512 max_rss_mb: 75.3125
34MB 32thread base -> kops/s: 3.346 io_bytes/op: 1.64852e+07 miss_ratio: 0.93596 max_rss_mb: 180.48
34MB 32thread folly -> kops/s: 3.431 io_bytes/op: 1.62857e+07 miss_ratio: 0.935693 max_rss_mb: 137.531
34MB 32thread gt_clock -> kops/s: 1.47 io_bytes/op: 4.89704e+06 miss_ratio: 0.295081 max_rss_mb: 392.465
34MB 32thread new_clock -> kops/s: 8.19 io_bytes/op: 3.70456e+06 miss_ratio: 0.20826 max_rss_mb: 519.793
34MB 128thread base -> kops/s: 2.293 io_bytes/op: 1.64351e+07 miss_ratio: 0.931866 max_rss_mb: 449.484
34MB 128thread folly -> kops/s: 2.34 io_bytes/op: 1.6219e+07 miss_ratio: 0.932023 max_rss_mb: 396.457
34MB 128thread gt_clock -> kops/s: 1.798 io_bytes/op: 5.4241e+06 miss_ratio: 0.324881 max_rss_mb: 1104.41
34MB 128thread new_clock -> kops/s: 10.519 io_bytes/op: 2.39354e+06 miss_ratio: 0.136147 max_rss_mb: 1050.52
As the miss ratio gets higher (say, above 10%), the CPU time spent in eviction starts to erode the advantage of using fewer shards (13% miss rate much lower than 94%). LRU's O(1) eviction time can eventually pay off when there's enough block cache churn:
13MB 1thread base -> kops/s: 0.195 io_bytes/op: 1.65732e+07 miss_ratio: 0.946604 max_rss_mb: 45.6328
13MB 1thread folly -> kops/s: 0.197 io_bytes/op: 1.63793e+07 miss_ratio: 0.94661 max_rss_mb: 33.8633
13MB 1thread gt_clock -> kops/s: 0.519 io_bytes/op: 4.43316e+06 miss_ratio: 0.269379 max_rss_mb: 100.684
13MB 1thread new_clock -> kops/s: 0.176 io_bytes/op: 1.54148e+07 miss_ratio: 0.91545 max_rss_mb: 66.2383
13MB 32thread base -> kops/s: 3.266 io_bytes/op: 1.65544e+07 miss_ratio: 0.943386 max_rss_mb: 132.492
13MB 32thread folly -> kops/s: 3.396 io_bytes/op: 1.63142e+07 miss_ratio: 0.943243 max_rss_mb: 101.863
13MB 32thread gt_clock -> kops/s: 2.758 io_bytes/op: 5.13714e+06 miss_ratio: 0.310652 max_rss_mb: 396.121
13MB 32thread new_clock -> kops/s: 3.11 io_bytes/op: 1.23419e+07 miss_ratio: 0.708425 max_rss_mb: 321.758
13MB 128thread base -> kops/s: 2.31 io_bytes/op: 1.64823e+07 miss_ratio: 0.939543 max_rss_mb: 425.539
13MB 128thread folly -> kops/s: 2.339 io_bytes/op: 1.6242e+07 miss_ratio: 0.939966 max_rss_mb: 346.098
13MB 128thread gt_clock -> kops/s: 3.223 io_bytes/op: 5.76928e+06 miss_ratio: 0.345899 max_rss_mb: 1087.77
13MB 128thread new_clock -> kops/s: 2.984 io_bytes/op: 1.05341e+07 miss_ratio: 0.606198 max_rss_mb: 898.27
gt_clock is clearly blowing way past its memory budget for lower miss rates and best throughput. new_clock also seems to be exceeding budgets, and this warrants more investigation but is not the use case we are targeting with the new cache. With partitioned index+filter, the miss ratio is much better, and although still high enough that the eviction CPU time is definitely offsetting mutex contention:
13MB 1thread base -> kops/s: 16.326 io_bytes/op: 23743.9 miss_ratio: 0.205362 max_rss_mb: 65.2852
13MB 1thread folly -> kops/s: 15.574 io_bytes/op: 19415 miss_ratio: 0.184157 max_rss_mb: 56.3516
13MB 1thread gt_clock -> kops/s: 14.459 io_bytes/op: 22873 miss_ratio: 0.198355 max_rss_mb: 63.9688
13MB 1thread new_clock -> kops/s: 16.34 io_bytes/op: 24386.5 miss_ratio: 0.210512 max_rss_mb: 61.707
13MB 128thread base -> kops/s: 289.786 io_bytes/op: 23710.9 miss_ratio: 0.205056 max_rss_mb: 103.57
13MB 128thread folly -> kops/s: 185.282 io_bytes/op: 19433.1 miss_ratio: 0.184275 max_rss_mb: 116.219
13MB 128thread gt_clock -> kops/s: 354.451 io_bytes/op: 23150.6 miss_ratio: 0.200495 max_rss_mb: 102.871
13MB 128thread new_clock -> kops/s: 295.359 io_bytes/op: 24626.4 miss_ratio: 0.212452 max_rss_mb: 121.109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10626
Test Plan: updated unit tests, stress/crash test runs including with TSAN, ASAN, UBSAN
Reviewed By: anand1976
Differential Revision: D39368406
Pulled By: pdillinger
fbshipit-source-id: 5afc44da4c656f8f751b44552bbf27bd3ca6fef9
|
2 years ago |
|
anand76
|
37b75e1364 |
Fix some MultiGet stats (#10673)
Summary: The stats were not accurate for the coroutine version of MultiGet. This PR fixes it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10673 Reviewed By: akankshamahajan15 Differential Revision: D39492615 Pulled By: anand1976 fbshipit-source-id: b46c04e15ea27e66f4c31f00c66497aa283bf9d3 |
2 years ago |
|
anand76
|
c206aebd0b |
Fix a MultiGet crash (#10688)
Summary: Fix a bug in the async IO/coroutine version of MultiGet that may cause a segfault or assertion failure due to accessing an invalid file index in a LevelFilesBrief. The bug is that when a MultiGetRange is split into two, we may re-process keys in the original range that were already marked to be skipped (in ```current_level_range_```) due to not overlapping the level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10688 Reviewed By: gitbw95 Differential Revision: D39556131 Pulled By: anand1976 fbshipit-source-id: 65e79438508a283cb19e64eca5c91d0714b81458 |
2 years ago |
|
Jay Zhuang
|
849cf1bf68 |
Refactor Compaction file cut `ShouldStopBefore()` (#10629)
Summary: Consolidate compaction output cut logic to `ShouldStopBefore()` and move it inside of CompactionOutputs class. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10629 Reviewed By: cbi42 Differential Revision: D39315536 Pulled By: jay-zhuang fbshipit-source-id: 7d81037babbd35c276bbaad02dbc2bb555fdac18 |
2 years ago |
|
Yanqin Jin
|
ce2c11d848 |
Fix a bug by setting up subcompaction bounds properly (#10658)
Summary: When user-defined timestamp is enabled, subcompaction bounds should be set up properly. When creating InputIterator for the compaction, the `start` and `end` should have their timestamp portions set to kMaxTimestamp, which is the highest possible timestamp. This is similar to what we do with setting up their sequence numbers to `kMaxSequenceNumber`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10658 Test Plan: ```bash make check rm -rf /dev/shm/rocksdb/* && mkdir /dev/shm/rocksdb/rocksdb_crashtest_expected && ./db_stress --allow_data_in_errors=True --clear_column_family_one_in=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb//rocksdb_crashtest_blackbox --delpercent=5 --delrangepercent=0 --expected_values_dir=/dev/shm/rocksdb//rocksdb_crashtest_expected --iterpercent=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 --max_write_batch_group_size_bytes=1048576 --nooverwritepercent=1 --ops_per_thread=300000 --paranoid_file_checks=1 --partition_filters=0 --prefix_size=8 --prefixpercent=5 --readpercent=30 --reopen=0 --snapshot_hold_ops=100000 --subcompactions=4 --target_file_size_base=65536 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 --use_multiget=1 --user_timestamp_size=8 --value_size_mult=32 --verify_checksum=1 --write_buffer_size=65536 --writepercent=60 -disable_wal=1 -column_families=1 ``` Reviewed By: akankshamahajan15 Differential Revision: D39393402 Pulled By: riversand963 fbshipit-source-id: f276e35b19fce51a175c368a502fb0718d1f3871 |
2 years ago |
|
Changyu Bi
|
be04a3b6cd |
Fix data race in accessing `cached_range_tombstone_` (#10680)
Summary: fix a data race introduced in https://github.com/facebook/rocksdb/issues/10547 (P5295241720), first reported by pdillinger. The race is between the `std::atomic_load_explicit` in NewRangeTombstoneIteratorInternal and the `std::atomic_store_explicit` in MemTable::Add() that operate on `cached_range_tombstone_`. P5295241720 shows that `atomic_store_explicit` initializes some mutex which `atomic_load_explicit` could be trying to call `lock()` on at the same time. This fix moves the initialization to memtable constructor. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10680 Test Plan: `USE_CLANG=1 COMPILE_WITH_TSAN=1 make -j24 whitebox_crash_test` Reviewed By: ajkr Differential Revision: D39528696 Pulled By: cbi42 fbshipit-source-id: ee740841044438e18ad2b8ea567444dd542dd8e2 |
2 years ago |
|
anand76
|
bb9a6d4e4b |
Bypass a MultiGet test when async_io is used (#10669)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10669 Reviewed By: akankshamahajan15 Differential Revision: D39492658 Pulled By: anand1976 fbshipit-source-id: abef79808e30762654680f7dd7e46487c631febc |
2 years ago |
|
Levi Tamasi
|
06ab0a8b40 |
Add wide-column support to iterators (#10670)
Summary: The patch extends the iterator API with a new `columns` method which can be used to retrieve all wide columns for the current key. Similarly to the `Get` and `GetEntity` APIs, the classic `value` API returns the value of the default (anonymous) column for wide-column entities, and `columns` returns an entity with a single default column for plain old key-values. (The goal here is to maintain the invariant that `value()` is the same as the value of the default column in `columns()`.) The patch also involves a smaller refactoring: historically, `value()` was implemented using a bunch of conditions, that is, the `Slice` to be returned was decided based on the direction of the iteration, whether a merge had been done etc. when the method was called; with the patch, the value to be exposed is stored in a member `Slice value_` when the iterator lands on a new key, and `value()` simply returns this `Slice`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10670 Test Plan: Ran `make check` and a simple blackbox crash test. Reviewed By: riversand963 Differential Revision: D39475551 Pulled By: ltamasi fbshipit-source-id: 29e7a6ed9ef340841aab36803b832b7c8f668b0b |
2 years ago |
|
Changyu Bi
|
f291eefb02 |
Cache fragmented range tombstone list for mutable memtables (#10547)
Summary: Each read from memtable used to read and fragment all the range tombstones into a `FragmentedRangeTombstoneList`. https://github.com/facebook/rocksdb/issues/10380 improved the inefficient here by caching a `FragmentedRangeTombstoneList` with each immutable memtable. This PR extends the caching to mutable memtables. The fragmented range tombstone can be constructed in either read (This PR) or write path (https://github.com/facebook/rocksdb/issues/10584). With both implementation, each `DeleteRange()` will invalidate the cache, and the difference is where the cache is re-constructed.`CoreLocalArray` is used to store the cache with each memtable so that multi-threaded reads can be efficient. More specifically, each core will have a shared_ptr to a shared_ptr pointing to the current cache. Each read thread will only update the reference count in its core-local shared_ptr, and this is only needed when reading from mutable memtables. The choice between write path and read path is not an easy one: they are both improvement compared to no caching in the current implementation, but they favor different operations and could cause regression in the other operation (read vs write). The write path caching in (https://github.com/facebook/rocksdb/issues/10584) leads to a cleaner implementation, but I chose the read path caching here to avoid significant regression in write performance when there is a considerable amount of range tombstones in a single memtable (the number from the benchmark below suggests >1000 with concurrent writers). Note that even though the fragmented range tombstone list is only constructed in `DeleteRange()` operations, it could block other writes from proceeding, and hence affects overall write performance. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10547 Test Plan: - TestGet() in stress test is updated in https://github.com/facebook/rocksdb/issues/10553 to compare Get() result against expected state: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Perf benchmark: tested read and write performance where a memtable has 0, 1, 10, 100 and 1000 range tombstones. ``` ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=200000 --reads=100000 --disable_auto_compactions --max_num_range_tombstones=1000 ``` Write perf regressed since the cost of constructing fragmented range tombstone list is shifted from every read to a single write. 6cbe5d8e172dc5f1ef65c9d0a6eedbd9987b2c72 is included in the last column as a reference to see performance impact on multi-thread reads if `CoreLocalArray` is not used. micros/op averaged over 5 runs: first 4 columns are for fillrandom, last 4 columns are for readrandom. | |fillrandom main | write path caching | read path caching |memtable V3 (https://github.com/facebook/rocksdb/issues/10308) | readrandom main | write path caching | read path caching |memtable V3 | |--- |--- |--- |--- |--- | --- | --- | --- | --- | | 0 |6.35 |6.15 |5.82 |6.12 |2.24 |2.26 |2.03 |2.07 | | 1 |5.99 |5.88 |5.77 |6.28 |2.65 |2.27 |2.24 |2.5 | | 10 |6.15 |6.02 |5.92 |5.95 |5.15 |2.61 |2.31 |2.53 | | 100 |5.95 |5.78 |5.88 |6.23 |28.31 |2.34 |2.45 |2.94 | | 100 25 threads |52.01 |45.85 |46.18 |47.52 |35.97 |3.34 |3.34 |3.56 | | 1000 |6.0 |7.07 |5.98 |6.08 |333.18 |2.86 |2.7 |3.6 | | 1000 25 threads |52.6 |148.86 |79.06 |45.52 |473.49 |3.66 |3.48 |4.38 | - Benchmark performance of`readwhilewriting` from https://github.com/facebook/rocksdb/issues/10552, 100 range tombstones are written: `./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=500 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=100000 --reads=500000 --disable_auto_compactions --max_num_range_tombstones=10000 --finish_after_writes` readrandom micros/op: | |main |write path caching |read path caching |memtable V3 | |---|---|---|---|---| | single thread |48.28 |1.55 |1.52 |1.96 | | 25 threads |64.3 |2.55 |2.67 |2.64 | Reviewed By: ajkr Differential Revision: D38895410 Pulled By: cbi42 fbshipit-source-id: 930bfc309dd1b2f4e8e9042f5126785bba577559 |
2 years ago |
|
Hui Xiao
|
f79b3d19a7 |
Inject spurious wakeup and sleep before acquiring db mutex to expose race condition (#10291)
Summary:
**Context/Summary:**
Previous experience with bugs and flaky tests taught us there exist features in RocksDB vulnerable to race condition caused by acquiring db mutex at a particular timing. This PR aggressively exposes those vulnerable features by injecting spurious wakeup and sleep to cause acquiring db mutex at various timing in order to expose such race condition
**Testing:**
- `COERCE_CONTEXT_SWITCH=1 make -j56 check / make -j56 db_stress` should reveal
- flaky tests caused by db mutex related race condition
- Reverted https://github.com/facebook/rocksdb/pull/9528
- A/B testing on `COMPILE_WITH_TSAN=1 make -j56 listener_test` w/ and w/o `COERCE_CONTEXT_SWITCH=1` followed by `./listener_test --gtest_filter=EventListenerTest.MultiCF --gtest_repeat=10`
- `COERCE_CONTEXT_SWITCH=1` can cause expected test failure (i.e, expose target TSAN data race error) within 10 run while the other couldn't.
- This proves our injection can expose flaky tests caused by db mutex related race condition faster.
- known or new race-condition-type of internal bug by continuously running this PR
- Performance
- High ops-threads time: COERCE_CONTEXT_SWITCH=1 regressed by 4 times slower (2:01.16 vs 0:22.10 elapsed ). This PR will be run as a separate CI job so this regression won't affect any existing job.
```
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=100000 --expected_values_dir=$exp --clear_column_family_one_in=0 \
--write_buffer_size=524288 —target_file_size_base=524288 —ingest_external_file_one_in=100 —compact_files_one_in=1000 —compact_range_one_in=1000
```
- Start-up time: COERCE_CONTEXT_SWITCH=1 didn't regress by 25% (0:01.51 vs 0:01.29 elapsed)
```
TEST_TMPDIR=$db ./db_stress -ops_per_thread=100000000 -expected_values_dir=$exp --clear_column_family_one_in=0 & sleep 120; pkill -9 db_stress
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=1 -reopen=0 --expected_values_dir=$exp --clear_column_family_one_in=0 --destroy_db_initially=0
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10291
Reviewed By: ajkr
Differential Revision: D39231182
Pulled By: hx235
fbshipit-source-id: 7ab6695430460e0826727fd8c66679b32b3e44b6
|
2 years ago |
|
Yanqin Jin
|
3d67d79154 |
Fix overlapping check by excluding timestamp (#10615)
Summary:
With user-defined timestamp, checking overlapping should exclude
timestamp part from key. This has already been done for range checking
for files in sstableKeyCompare(), but not yet done when checking with
concurrent compactions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10615
Test Plan:
(Will add more tests)
make check
(Repro seems easier with this commit sha: git checkout
|
2 years ago |
|
Levi Tamasi
|
fe56cb9aa0 |
Eliminate some allocations/copies around the blob cache (#10647)
Summary: Historically, `BlobFileReader` has returned the blob(s) read from the file in the `PinnableSlice` provided by the client. This interface was preserved when caching was implemented for blobs, which meant that the blob data was copied multiple times when caching was in use: first, into the client-provided `PinnableSlice` (by `BlobFileReader::SaveValue`), and then, into the object stored in the cache (by `BlobSource::PutBlobIntoCache`). The patch eliminates these copies and the related allocations by changing `BlobFileReader` so it returns its results in the form of heap-allocated `BlobContents` objects that can be directly inserted into the cache. The allocations backing these `BlobContents` objects are made using the blob cache's allocator if the blobs are to be inserted into the cache (i.e. if a cache is configured and the `fill_cache` read option is set). Note: this PR focuses on the common case when blobs are compressed; some further small optimizations are possible for uncompressed blobs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10647 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39335185 Pulled By: ltamasi fbshipit-source-id: 464503d60a5520d654c8273ffb8efd5d1bcd7b36 |
2 years ago |
|
Peter Dillinger
|
6de7081cf3 |
Always verify SST unique IDs on SST file open (#10532)
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2 |
2 years ago |
|
Bo Wang
|
d490bfcdb6 |
Avoid recompressing cold block in CompressedSecondaryCache (#10527)
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
|
2 years ago |
|
Levi Tamasi
|
c8543296ca |
Support custom allocators for the blob cache (#10628)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10628 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D39228165 Pulled By: ltamasi fbshipit-source-id: 591fdff08db400b170b26f0165551f86d33c1dbf |
2 years ago |
|
Andrew Kryczka
|
5a97e6b1d2 |
Deflake blob caching tests (#10636)
Summary:
Example failure:
```
db/blob/db_blob_basic_test.cc:226: Failure
Expected equality of these values:
i
Which is: 1
num_blobs
Which is: 5
```
I can't repro locally, but it looks like the 2KB cache is too small to guarantee no eviction happens between loading all the data into cache and reading from `kBlockCacheTier`. This 2KB setting appears to have come from a test where the cached entries are pinned, where it makes sense to have a small setting. However, such a small setting makes less sense when the blocks are evictable but must remain cached per the test's expectation. This PR increases the capacity setting to 2MB for those cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10636
Reviewed By: cbi42
Differential Revision: D39250976
Pulled By: ajkr
fbshipit-source-id: 769309f9a19cfac20b67b927805c8df5c1d2d1f5
|
2 years ago |
|
Andrew Kryczka
|
1ffadbe9fc |
Deflake DBErrorHandlingFSTest.*WALWriteError (#10642)
Summary: Example flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/17660/workflows/7a891875-f07b-4a67-b204-eaa7ca9f9aa2/jobs/467496 The test could get stuck in out-of-space due to a callback executing `SetFilesystemActive(false /* active */)` after the test executed `SetFilesystemActive(true /* active */)`. This could happen because background info logging went through the SyncPoint callback "WritableFileWriter::Append:BeforePrepareWrite", probably unintentionally. The solution of this PR is to call `ClearAllCallBacks()` to wait for any such pending callbacks to drain before calling `SetFilesystemActive(true /* active */)` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10642 Reviewed By: cbi42 Differential Revision: D39265381 Pulled By: ajkr fbshipit-source-id: 9a2f4916ab19726c8fb4b3a3b590b1b9ed93de1b |
2 years ago |