Summary: Enabled build in Windows and corresponding fixes
Test Plan:
Compile and run persistent_cache_test in Windows and make check in
Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59307
Summary:
PersistentCacheOptions class in persistent_cache_tier.h is not used any where yet in the code base
but it break the unity build because it have the same name as PersistentCacheOptions in table/persistent_cache_helper.h
Remove it temporarily, and the @krad can add it again with a different name when we start using it
Test Plan:
make unity_test -j64
make check -j64
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59349
Summary: Disable the test under TSAN temporary to temporarily the build
Test Plan: run the test under TSAN
Reviewers: kradhakrishnan, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59337
Summary:
This provides provides an implementation of PersistentCacheTier that is
specialized for RAM. This tier does not persist data though.
Why do we need this tier ?
This is ideal as tier 0. This tier can host data that is too hot.
Why can't we use Cache variants ?
Yes you can use them instead. This tier can potentially outperform BlockCache
in RAW mode by virtue of compression and compressed cache in block cache doesn't
seem very popular. Potentially this tier can be modified to under stand the
disadvantage of the tier below and retain data that the tier below is bad at
handling (for example index and bloom data that is huge in size)
Test Plan: Run unit tests added
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57069
Summary:
Fix 2 issues that was breaking Windows build
1) double to size_t potential downcast warning
2) port_posix is not ready for windows, avoiding building hash_table_bench to
avoid build break
Test Plan: compile in Windoes and make check
Reviewers: sdong, andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59265
Summary:
This diff provides the basic interface definitions of persistent read
cache system
PersistentCacheOptions captures the persistent read cache options used to
configure and control the system
PersistentCacheTier provides the basic building block for constructing tiered
cache
PersistentTieredCache provides a logical abstraction of tiers of cache layered
over one another
Test Plan: Compile
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57051
Summary:
Rocksdb backup and restore rate limiting is currently done per backup/restore.
So, it is difficult to control rate across multiple backup/restores. With this
change, a throttler can be provided. If a throttler is provided, it is used.
Otherwise, a new throttler is created based on the actual rate limits specified
in the options.
Test Plan: Added unit tests
Reviewers: ldemailly, andrewkr, sdong
Reviewed By: andrewkr
Subscribers: igor, yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56265
Summary:
This enables configurable Envs without recompiling. For example, my
next diff will make env_test test an Env created by NewEnvFromUri(). Then,
users can determine which Env is tested simply by providing the URI for
NewEnvFromUri() (e.g., through a CLI argument or environment variable).
The registration process allows us to register any Env that is linked with the
RocksDB library, so we can register our internal Envs as well.
The registration code is inspired by our internal InitRegistry.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, lightmark, ldemailly, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D58449
Summary: Add hash table (under persistent cache) to CMake list
Test Plan: Run hash_test in windows and make check in Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59151
Summary:
Persistent read cache isn't very applicable for lite builds. Wrapping
the code with #ifndef ROCKSDB_LITE .. #endif
Test Plan: Run unit, lite, lite_test
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58563
Summary:
Google C++ Style writes: In particular, prefer to write lambda captures explicitly when capturing this or if the lambda will escape the current scope.
Here it is the case for both.
Test Plan: Run all test suites.
Reviewers: andrewkr, dhruba
Reviewed By: andrewkr, dhruba
Subscribers: yhchiang, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58515
Summary:
Introduce MaxOperator a simple merge operator that return the max of all operands.
This merge operand help me in benchmarking
Test Plan: Add new unitttests
Reviewers: sdong, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57873
Summary: This tests that a prepared transaction is not lost after several crashes, restarts, and memtable flushes.
Test Plan: TwoPhaseLongPrepareTest
Reviewers: sdong
Subscribers: hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58185
Summary:
TransactionTest.TwoPhaseMultiThreadTest runs forever under TSAN and our CI builds time out
looks like the reason is that some threads keep running and other threads dont get a chance to increment the counter
Test Plan: run the test under TSAN
Reviewers: sdong, horuff
Reviewed By: horuff
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58359
Summary:
We expect the persistent read cache to perform at speeds upto 8 GB/s. In order
to accomplish that, we need build a index mechanism which operate in the order
of multiple millions per sec rate.
This patch provide the basic data structure to accomplish that:
(1) Hash table implementation with lock contention spread
It is based on the StripedHashSet<T> implementation in
The Art of multiprocessor programming by Maurice Henry & Nir Shavit
(2) LRU implementation
Place holder algorithm for further optimizing
(3) Evictable Hash Table implementation
Building block for building index data structure that evicts data like files
etc
TODO:
(1) Figure if the sharded hash table and LRU can be used instead
(2) Figure if we need to support configurable eviction algorithm for
EvictableHashTable
Test Plan: Run unit tests
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55785
Summary:
- Make sure we clean up recovered_transactions_ on DBImpl destructor
- delete leaked txns and env in TransactionTest
Test Plan: Run transaction_test under valgrind
Reviewers: sdong, andrewkr, yhchiang, horuff
Reviewed By: horuff
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58263
Summary: Disable backupable_db_test.cc on Windows since EnvChroot is not supported
Test Plan: check ROCKSDB_LITE
Reviewers: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58035
Summary:
- Used ChrootEnv so the database and backup Envs are isolated in the filesystem.
- Removed DifferentEnvs test since now every test uses different Envs
Depends on D57543
Test Plan:
- ran backupable_db_test
- verified backupable_db_test now catches the bug when D57159 is backed out (this bug previously passed through the test cases, which motivated this change)
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57615
Summary:
1. prepare()
2. crash
3. recover
4. commit()
5. crash
6. data is lost
This is due to the transaction data still only residing in the WAL but because the logs were flushed on the first recovery the data is ignored on the second recovery. We must scan all logs found on recovery and only ignore redundant data at the time of replay. It is not possible to know which logs still contain relevant data at time of recovery. We cannot simply ignore a log because all of the non-2pc data it contains has already been written to L0.
The changes made to MemTableInserter are to ensure that prepared sections are still recovered even if all of the non-2pc data in that log has already been flushed to L0.
Test Plan: Provided test.
Reviewers: sdong
Subscribers: andrewkr, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57729
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: andrewkr, vasilep, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54093
Summary: Fix BackupableDBTest.NoDoubleCopy and BackupableDBTest.DifferentEnvs by mocking the db files in db_env instead of backup_env_
Test Plan: make check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57273
Summary:
When db_env_ != backup_env_, InsertPathnameToSizeBytes() would
use the wrong Env during backup creation. This happened because this function
used backup_env_ instead of db_env_ to get WAL/data file sizes.
This diff adds an argument to InsertPathnameToSizeBytes() indicating which Env
to use.
Test Plan: ran @anirbanb's BackupTestTool
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57159
* Musl libc does not provide adaptive mutex. Added feature test for PTHREAD_MUTEX_ADAPTIVE_NP.
* Musl libc does not provide backtrace(3). Added a feature check for backtrace(3).
* Fixed compiler error.
* Musl libc does not implement backtrace(3). Added platform check for libexecinfo.
* Alpine does not appear to support gcc -pg option. By default (gcc has PIE option enabled) it fails with:
gcc: error: -pie and -pg|p|profile are incompatible when linking
When -fno-PIE and -nopie are used it fails with:
/usr/lib/gcc/x86_64-alpine-linux-musl/5.3.0/../../../../x86_64-alpine-linux-musl/bin/ld: cannot find gcrt1.o: No such file or directory
Added gcc -pg platform test and output PROFILING_FLAGS accordingly. Replaced pg var in Makefile with PROFILING_FLAGS.
* fix segfault when TEST_IOCTL_FRIENDLY_TMPDIR is undefined and default candidates are not suitable
* use ASSERT_DOUBLE_EQ instead of ASSERT_EQ
* When compiled with ROCKSDB_MALLOC_USABLE_SIZE UniversalCompactionFourPaths and UniversalCompactionSecondPathRatio tests fail due to premature memtable flushes on systems with 16-byte alignment. Arena runs out of block space before GenerateNewFile() completes.
Increased options.write_buffer_size.
Summary:
This interface is redundant and has been deprecated for a while.
It's also unused internally. Let's delete it.
I moved the comments to the corresponding functions in BackupEngine/
BackupEngineReadOnly. This caused the diff tool to not work cleanly.
Test Plan:
unit tests
$ ./backupable_db_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56331
Summary:
Several of backupable_db_test fails if running standalone, because of directory missing. Fix it by:
(1) garbage collector skips shared directory if it doesn't exit
(2) BackupableDBTest.Issue921Test to create the parent directory of the backup directory fist.
Test Plan: Run the tests individually and make sure they pass
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56829
Summary:
- Need to use unsigned long long for 64-bit literals on windows
- Need size_t for backup meta-file length since clang doesn't let us assign size_t to int
Test Plan: backupable_db_test and options_test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56391
Summary:
My last diff introduced a warning when compiling under release mode
https://reviews.facebook.net/D55539
fix the warning
Test Plan:
DEBUG_LEVEL=0 make db_bench
make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56295
Summary:
- Put key offset and key size in WriteBatchIndexEntry
- Use vector for comparators in WriteBatchEntryComparator
I use a slightly modified version of @yoshinorim code to benchmark
https://gist.github.com/IslamAbdelRahman/b120f4fba8d6ff7d58d2
For Put I create a transaction that put a 1000000 keys and measure the time spent without commit.
For GetForUpdate I read the keys that I added in the Put transaction.
Original time:
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 3.679 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.940 seconds
```
New Time
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 2.727 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.880 seconds
```
It looks like there is no significant improvement in GetForUpdate() but we can see ~30% improvement in Put()
Test Plan: unittests
Reviewers: yhchiang, anthony, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D55539
Summary:
Rocksdb backup engine maintains metadata about backups in separate files. But,
there was no way to add extra application specific data to it. Adding support
for that.
In some use cases, applications decide to restore a backup based on some
metadata. This will help those cases to cheaply decide whether to restore or
not.
Test Plan:
Added a unit test. Existing ones are passing
Sample meta file for BinaryMetadata test-
```
1459454043
0
metadata 6162630A64656600676869
2
private/1/MANIFEST-000001 crc32 1184723444
private/1/CURRENT crc32 3505765120
```
Reviewers: sdong, ldemailly, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, ldemailly
Differential Revision: https://reviews.facebook.net/D56007
Summary:
This fixes a similar issue as D54711: "CURRENT" file can mutate between
GetLiveFiles() and copy to the tmp directory, in which case it would reference
the wrong manifest filename. To fix this, I forge the "CURRENT" file such that
it simply contains the filename for the manifest returned by GetLiveFiles().
- Changed CreateCheckpoint() to forge current file
- Added CreateFile() utility function
- Added test case that rolls manifest during checkpoint creation
Test Plan:
$ ./checkpoint_test
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55065
Summary: Refactored db_bench transaction stress tests so that they can be called from unit tests as well.
Test Plan: run new unit test as well as db_bench
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55203
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge
Test Plan:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
Reviewers: IslamAbdelRahman, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55269
Summary: Previously, reusing a transaction (by passing it as an argument to BeginTransaction) would not clear the transaction's snapshot. This is not a clear, well-definited behavior.
Test Plan: improved test
Reviewers: sdong, IslamAbdelRahman, horuff, jkedgar
Reviewed By: jkedgar
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55053
Summary:
Now that we get sizes efficiently, we no longer need the workaround to
embed file size in filename.
Test Plan:
$ ./backupable_db_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55035