Summary:
The goal of this diff is to create a simple stress test with focus on catching:
* bugs in compaction/flush processes, especially the ones that cause assertion errors
* bugs in the code that deletes obsolete files
There are two parts of the test:
* write_stress, a binary that writes to the database
* write_stress_runner.py, a script that invokes and kills write_stress
Here are some interesting parts of write_stress:
* Runs with very high concurrency of compactions and flushes (32 threads total) and tries to create a huge amount of small files
* The keys written to the database are not uniformly distributed -- there is a 3-character prefix that mutates occasionally (in prefix mutator thread), in such a way that the first character mutates slower than second, which mutates slower than third character. That way, the compaction stress tests some interesting compaction features like trivial moves and bottommost level calculation
* There is a thread that creates an iterator, holds it for couple of seconds and then iterates over all keys. This is supposed to test RocksDB's abilities to keep the files alive when there are references to them.
* Some writes trigger WAL sync. This is stress testing our WAL sync code.
* At the end of the run, we make sure that we didn't leak any of the sst files
write_stress_runner.py changes the mode in which we run write_stress and also kills and restarts it. There are some interesting characteristics:
* At the beginning we divide the full test runtime into smaller parts -- shorter runtimes (couple of seconds) and longer runtimes (100, 1000) seconds
* The first time we run write_stress, we destroy the old DB. Every next time during the test, we use the same DB.
* We can run in kill mode or clean-restart mode. Kill mode kills the write_stress violently.
* We can run in mode where delete_obsolete_files_with_fullscan is true or false
* We can run with low_open_files mode turned on or off. When it's turned on, we configure table cache to only hold a couple of files -- that way we need to reopen files every time we access them.
Another goal was to create a stress test without a lot of parameters. So tools/write_stress_runner.py should only take one parameter -- runtime_sec and it should figure out everything else on its own.
In a separate diff, I'll add this new test to our nightly legocastle runs.
Test Plan:
The goal of this test was to retroactively catch the following bugs: D33045, D48201, D46899, D42399. I failed to reproduce D48201, but all others have been caught!
When i reverted https://reviews.facebook.net/D33045:
./write_stress --runtime_sec=200 --low_open_files_mode=true
Iterator statuts not OK: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/089166.sst: No such file or directory
When i reverted https://reviews.facebook.net/D42399:
python tools/write_stress_runner.py --runtime_sec=5000
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1
Running write_stress, will kill after 2 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 7 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 8 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --low_open_files_mode=true
Write to DB failed: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/019250.sst: No such file or directory
ERROR: write_stress died with exitcode=-6
When i reverted https://reviews.facebook.net/D46899:
python tools/write_stress_runner.py --runtime_sec=1000
runtime: 1000
Going to execute write stress for [3, 3, 100, 3, 2, 100, 1, 788]
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --low_open_files_mode=true
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 100 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
write_stress: db/db_impl.cc:2070: void rocksdb::DBImpl::MarkLogsSynced(uint64_t, bool, const rocksdb::Status&): Assertion `log.getting_synced' failed.
ERROR: write_stress died with exitcode=-6
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, sdong, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49533
Summary: Use DEBUG_LEVEL=0 in make release and make clean
Test Plan:
make clean
make release -j32
Reviewers: MarkCallaghan, sdong, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49125
Summary:
merge tools/db_crashtest2.py into tools/db_crashtest.py
python tools/db_crashtest.py -h # show help message, ALL parameters can be overwrite by arguments
Example usages:
python tools/db_crashtest.py blackbox # run blackbox with default parameters
python tools/db_crashtest.py blackbox --simple
python tools/db_crashtest.py whitebox # run whitebox with default parameters
python tools/db_crashtest.py whitebox --simple
all default parameters are identical to previous version.
Test Plan: `make crash_test` and make sure it can run with expected parameters pased to db_stress.
Reviewers: igor, rven, anthony, IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48567
Summary:
In the current make file, DEBUG_LEVEL is forced to set to 1
instead of default to 1. This patch fix this issue.
Test Plan:
DEBUG_LEVEL=2 make db_bench -j32
DEBUG_LEVEL=0 make db_bench -j32
DEBUG_LEVEL=0 make release -j32
And see whether there's a warning pops up.
Reviewers: MarkCallaghan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48933
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
This diff exclude alot of tests in db_test that are not compiling / failing under ROCKSD_LITE
Test Plan:
OPT=-DROCKSDB_LITE make check -j64
make check -j64
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48771
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
Summary: manual_compaction_test.cc incorrectly in util. Moved to db.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48687
1) There is no need to download and install the compression libraries twice
just to get access to their header files during the compile phase.
2) Ensure that the compression library headers files used during the
compile phase are the same ones used to build the static library that
is linked into the library.
Summary:
As part of tech debt week, we are cleaning up dependencies.
This diff moves db_test_util.[h,cc] from util to db directory.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48543
1) There is no need to download and install the compression libraries twice
just to get access to their header files during the compile phase.
2) Ensure that the compression library headers files used during the
compile phase are the same ones used to build the static library that
is linked into the library.
in the Java jar. Also build the linux libraries using the portable flag to fix a problem with
the linux32 build and improve the general portability of the RocksDB dynamic libraries.
==> linux32: util/crc32c.cc:318:39: error: ‘_mm_crc32_u64’ was not declared in this scope
Summary:
I see a lot of users compiling RocksDB with `make` or `make all` and then using those binaries in production. They end up running debug builds :(
This diff makes it harder for them:
1. I added an explicit warning to INSTALL.md
2. When you compile with `make all`, your resulting library will be librocksdb_debug.a
3. I also print out a warning when you compile in debug mode.
Hopefully should be enough :)
Test Plan: none
Reviewers: rven, yhchiang, kradhakrishnan, anthony, sdong, dhruba, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48093
Summary: unity_test will compile db_test with unity.a instead of librocksdb.a. This will test both the compilation and some small amount of runtime.
Test Plan: This is a test :)
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48297
This commit adds two new targets to the Makefile: rocksdb.cc and rocksdb.h
These files, when combined with the c.h header, are a self-contained RocksDB
source distribution called an amalgamation. (The name comes from SQLite's, which
is similar in concept.)
The main benefit of an amalgamation is that it's very easy to drop into a
new project. It also compiles faster compared to compiling individual source
files and potentially gives the compiler more opportunity to make optimizations
since it can see all functions at once.
rocksdb.cc and rocksdb.h are generated by a new script, amalgamate.py.
A detailed description of how amalgamate.py works is in a comment at the top of
the file.
There are also some small changes to existing files to enable the amalgamation:
* Use quotes for includes in unity build
* Fix an old header inclusion in util/xfunc.cc
* Move some includes outside ifdef in util/env_hdfs.cc
* Separate out tool sources in Makefile so they won't be included in unity.cc
* Unity build now produces a static library
Closes#733
Summary: Our valgrind testing is buggy and cumbersome in terms of locating the
error. It originates from the fact we accumulate all output for the tests. It is
extremely hard to locate the point of error.
The communication between valgrind and the script is not sturdy. We are
experiencing bugs.
Simplifying to stop on first error.
Test Plan: Run manually
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary:
Fix hex2String performance issues by removing sscanf dependency.
Also fixed some edge case handling (odd length, bad input).
Test Plan: Created a test file which called old and new implementation, and validated results are the same. I'll paste results in the phabricator diff.
Reviewers: igor, rven, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: thatsafunnyname, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46785
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
When running `make rocksdbjava V=1`, it currently does
not print out the original command but something odd instead:
mkdir -p jl/db
This patch tries to fix this issue.
Test Plan: make rocksdbjava V=1
Reviewers: igor, sdong, IslamAbdelRahman, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47061
Summary: This patch fixed couple build issues of rocksdbjavastaticrelease.
Test Plan: make rocksdbjavastaticrelease
Reviewers: sdong, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45915
My use case is to build the rocksdb static library and tools, and
ideally I'd like to not spend time building the shared library and other
targets that I won't use.
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: Currently, valgrind_check doesn't fail on test failures, which creates confusion. valgrind_check should fail if test fails.
Test Plan: Manually change tests to return test failure or cause memory leak and see valgrind_check has the correct behavior.
Reviewers: anthony, yhchiang, IslamAbdelRahman, igor, kradhakrishnan, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43629
Summary:
Add two unit tests for SyncWAL(). One makes sure SyncWAL() doesn't block writes in the other thread. Another one makes sure SyncWAL() doesn't wait ongoing writes to finish before being executed.
Create a new test file db_wal_test and move two WAL related tests from db_test to here.
Test Plan: Run the new tests
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, kolmike, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43605
Summary: "make commit-prereq" fails to clean up java, which can cause rocksjava failure.
Test Plan: Run commit-prepreq
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43575
Summary:
Introduce DeleteScheduler that allow enforcing a rate limit on file deletion
Instead of deleting files immediately, files are moved to trash directory and deleted in a background thread that apply sleep penalty between deletes if needed.
I have updated PurgeObsoleteFiles and PurgeObsoleteWALFiles to use the delete_scheduler instead of env_->DeleteFile
Test Plan:
added delete_scheduler_test
existing unit tests
Reviewers: kradhakrishnan, anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43221
Summary:
crash_test now only runs complicated options, multiple column families, prefix hash, frequently changing options, many compaction threads, etc. These options are good to cover new features but we loss coverage in most common use cases. Furthermore, by running only for multiple column families, we are not able to create LSM trees that are large enough to cover some stress cases.
Make half of crash_test runs the simply tests: single column family, default mem table, one compaction thread, no change options.
Test Plan: Run crash_test
Reviewers: rven, yhchiang, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43461
Summary:
This diff adds CompactOnDeletionCollector in utilities/table_properties_collectors,
which applies a sliding window to a sst file and mark this file as need-compaction
when it observe enough deletion entries within the consecutive keys covered by
the sliding window.
Test Plan: compact_on_deletion_collector_test
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yoshinorim, sdong
Reviewed By: sdong
Subscribers: maykov, dhruba
Differential Revision: https://reviews.facebook.net/D41175
Summary:
Whenever a Java class implements equals(), it has to implement hashCode(), otherwise
there might be weird behavior when inserting instances of the class in a hash map for
example. This adds two missing hashCode() implementations and extends tests to test
the hashCode() implementations.
Test Plan: make jtest
Reviewers: rven, igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: anthony, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43017
Summary:
From other ones' investigation:
"sync_file_range() behavior highly depends on kernel version and filesystem.
xfs does neighbor page flushing outside of the specified ranges. For example, sync_file_range(fd, 8192, 16384) does not only trigger flushing page #3 to #4, but also flushing many more dirty pages (i.e. up to page#16)... Ranges of the sync_file_range() should be far enough from write() offset (at least 1MB)."
Test Plan: make all check
Reviewers: igor, rven, kradhakrishnan, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: yoshinorim, MarkCallaghan, sumeet, domas, dhruba, leveldb, ljin
Differential Revision: https://reviews.facebook.net/D15807
Summary: Move general compaction tests from db_test.cc to db_compaction_test.cc
Test Plan:
db_test
db_compaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42651
Summary: Add db_inplace_update_test back to Makefile
Test Plan: make all check
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42717
Summary:
This reverts commit 03467bdd4d.
It seems the previous git merge remove all the tabs in Makefile
and cause the Makefile not runnable. This patch revert that incorrect
merge.
Test Plan: make
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42705
Conflicts:
CMakeLists.txt
Makefile
Summary: Add missing db_log_iter_test in the test list
Test Plan: make all check
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42663
Summary:
Fixed DBTestUniversalManualCompactionOutputPathId test
by changing the expected number of files when setting up
the test as flushes no-longer preempt compactions
in patch https://reviews.facebook.net/D41931.
Also, include db_universal_copaction_test in make all check.
Test Plan: db_universal_copaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42639
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
MergeUntil was not reporting a success when merging an operand with
a Value/Deletion despite the comments in MergeHelper and CompactionJob
indicating otherwise. This lead to operands being written to the compaction
output unnecessarily:
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M2 M3 M4 M5 (before the diff)
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M4 M5 (after the diff)
In addition, the code handling Values/Deletion was basically identical.
This patch unifies the code. Finally, this patch also adds testing for
merge_helper.
Test Plan: make && make check
Reviewers: sdong, rven, yhchiang, tnovak, igor
Reviewed By: igor
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42351
Summary:
For some reason, parallel tests are failing in Jenkins. We turned off parallel tests for all tests except `make coverage`. Let's turn it off here, too, so that we can have Jenkins test working again.
For the error log, see: https://ci-builds.fb.com/job/rocksdb_coverage/166/console
Test Plan: commit and wait for jenkins
Reviewers: meyering, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42057
Summary: Move UniversalCompaction related db-tests to db_universal_compaction_test.cc
Test Plan:
db_test
db_universal_compaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42225
Summary: Make TransactionLogIterator related tests from db_test.cc to db_log_iter_test.cc
Test Plan:
db_test
db_log_iter_test
Reviewers: sdong, IslamAbdelRahman, igor, anthony
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42045
Summary: This is revert of D40449. I'm not sure why our tests failed before, they seem to be working fine on my devbox.
Test Plan: ran `make check`
Reviewers: anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41955
Summary:
Move reusable part of db_test.cc to util/db_test_util.h.
This makes it more possible to partition db_test.cc into
multiple smaller test files.
Also, fixed many old lint errors in db_test.
Test Plan: db_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong, kradhakrishnan
Reviewed By: sdong, kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41973
Igor Canadi