Summary:
https://github.com/facebook/rocksdb/issues/7340 reports and reproduces an assertion failure caused by a combination of the following:
- atomic flush is disabled.
- a column family can appear multiple times in the flush queue at the same time. This behavior was introduced in release 5.17.
Consequently, it is possible that two flushes race with each other. One bg flush thread flushes all memtables. The other thread calls `FlushMemTableToOutputFile()` afterwards, and hits the assertion error below.
```
assert(cfd->imm()->NumNotFlushed() != 0);
assert(cfd->imm()->IsFlushPending());
```
Fix this by reverting the behavior. In non-atomic-flush case, a column family can appear in the flush queue at most once at the same time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7362
Test Plan:
make check
Also run stress test successfully for 10 times.
```
make crash_test
```
Reviewed By: ajkr
Differential Revision: D25172996
Pulled By: riversand963
fbshipit-source-id: f1559b6366cc609e961e3fc83fae548f1fad08ce
Summary:
WAL may be truncated to an incomplete record due to crash while writing
the last record or corruption. In the former case, no hole will be
produced since no ACK'd data was lost. In the latter case, a hole could
be produced without this PR since we proceeded to recover the next WAL
as if nothing happened. This PR changes the record reading code to
always report a corruption for incomplete records in
`kPointInTimeRecovery` mode, and the upper layer will only ignore them
if the next WAL has consecutive seqnum (i.e., we are guaranteed no
hole).
While this solves the hole problem for the case of incomplete
records, the possibility is still there if the WAL is corrupted by
truncation to an exact record boundary. This PR also regresses how much data
can be recovered when writes are mixed with/without
`WriteOptions::disableWAL`, as then we can not distinguish between a
seqnum gap caused by corruption and a seqnum gap caused by a `disableWAL` write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7701
Test Plan:
Interestingly there already was a test for this case
(`DBWALTestWithParams.kPointInTimeRecovery`); it just had a typo bug in
the verification that prevented it from noticing holes in recovery.
Reviewed By: anand1976
Differential Revision: D25111765
Pulled By: ajkr
fbshipit-source-id: 5e330b13b1ee2b5be096cea9d0ff6075843e57b6
Summary:
Recent test report shows that some tests have been skipped.
For DBWALTest that inherits from DBTestBase, the following will always be
true, since `env_` is an instance of `SpecialEnv`, not `Env::Default()`. Thus the test
will always be skipped.
```
if (options.env != Env::Default()) {
ROCKSDB_GTEST_SKIP("Test requires default environment");
return;
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7628
Test Plan:
./db_wal_test --gtest_filter=DBWALTest.TruncateLastLogAfterRecoverWithoutFlush
MEM_ENV=1 ./db_wal_test --gtest_filter=DBWALTest.TruncateLastLogAfterRecoverWithoutFlush
make check
Reviewed By: jay-zhuang
Differential Revision: D24693006
Pulled By: riversand963
fbshipit-source-id: 7f2a772492a0f11bff17bbf5e9f493e9e9a1c125
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
The patch adds support for extracting large values into blob files when
performing a flush during recovery (when `avoid_flush_during_recovery` is
`false`). Blob files are built and added to the `Version` similarly to flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7388
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23709912
Pulled By: ltamasi
fbshipit-source-id: ce48b4227849cf25429ae98574e72b0e1cb9c67d
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
The two features are naturally incompatible. WAL recycling expects the recovery to succeed upon encountering a corrupt record at the point where new data ends and recycled data remains at the tail. However, `WALRecoveryMode::kTolerateCorruptedTailRecords` must fail upon encountering any such corrupt record, as it cannot differentiate between this and a real corruption, which would cause committed updates to be truncated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7271
Reviewed By: riversand963
Differential Revision: D23169923
Pulled By: ajkr
fbshipit-source-id: 2cf8a3bcd2c9a0ecb0055a84725047a10fd4db50
Summary:
As part of the IOTracing project, this PR
1. Caches "FileSystemPtr" object(wrapper class that returns file system pointer based on tracing enabled) instead of "FileSystem" pointer.
2. FileSystemPtr object is created using FileSystem pointer and IOTracer
pointer.
3. IOTracer shared_ptr is created in DBImpl and it is passed to different classes through constructor.
4. When tracing is enabled through DB::StartIOTrace, FileSystemPtr
returns FileSystemTracingWrapper pointer for tracing purpose and when
it is disabled underlying FileSystem pointer is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7180
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D22987117
Pulled By: akankshamahajan15
fbshipit-source-id: 6073617e4c2d5bc363914f3a1f55ae3b0a58fbf1
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
As title. The goal is to shorten the execution time of several tests
when they are combined together in a single TEST_F.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7105
Test Plan:
make db_wal_test
./db_wal_test
Reviewed By: ltamasi
Differential Revision: D22442705
Pulled By: riversand963
fbshipit-source-id: 0ad49b8f21fa86dcd5a4d3c9a06af313735ac217
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
Add methods and constructors for handling enums to the OptionTypeInfo. This change allows enums to be converted/compared without adding a special "type" to the OptionType.
This change addresses a couple of issues:
- It allows new enumerated types to be added to the options without editing the OptionType base class (and related methods)
- It standardizes the procedure for adding enumerated types to the options, reducing potential mistakes
- It moves the enum maps to the location where they are used, allowing them to be static file members rather than global values
- It reduces the number of types and cases that need to be handled in the various OptionType methods
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6423
Reviewed By: siying
Differential Revision: D21408713
Pulled By: zhichao-cao
fbshipit-source-id: fc492af285d011822578b95d186a0fce25d35626
Summary:
`TruncateLastLogAfterRecoverWithoutFlush` case depends on fallocate support
of underlying file system.
On a file system which lacks of this feature, like zfs, it will fail to allocate predefined file size as this test case intends to do;
So a check block is added to detect fallocate support and skip test if not.
The related work is done by JunHe77. Thanks!
Signed-off-by: Yuqi Gu <yuqi.gu@arm.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6437
Differential Revision: D20145032
Pulled By: pdillinger
fbshipit-source-id: c8b691dc508e95acfa2a004ddbc07e2faa76680d
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We were removing the file from `log_recycle_files_` before renaming it
with `ReuseWritableFile()`. Since `ReuseWritableFile()` occurs outside
the DB mutex, it was possible for a concurrent full purge to sneak in
and delete the file before it could be renamed. Consequently, `SwitchMemtable()`
would fail and the DB would enter read-only mode.
The fix is to hold the old file number in `log_recycle_files_` until
after the file has been renamed. Full purge uses that list to decide
which files to keep, so it can no longer delete a file pending recycling.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5900
Test Plan: new unit test
Differential Revision: D19771719
Pulled By: ajkr
fbshipit-source-id: 094346349ca3fb499712e62de03905acc30b5ce8
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
Adding a light weight API to get last live WAL file name and size. Meant to be used as a helper for backup/restore tooling in a larger ecosystem such as MySQL with a MyRocks storage engine.
Specifically within MySQL's backup/restore mechanism, this call can be made with a write lock on the mysql db to get a transactionally consistent snapshot of the current WAL file position along with other non-rocksdb log/data files.
Without this, the alternative would be to take the aforementioned lock, scan the WAL dir for all files, find the last file and note its exact size as the rocksdb 'checkpoint'.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5765
Differential Revision: D17172717
Pulled By: affandar
fbshipit-source-id: f2fabafd4c0e6fc45f126670c8c88a9f84cb8a37
Summary:
https://github.com/facebook/rocksdb/pull/5520 caused a buffer overflow bug in DBWALTest.kTolerateCorruptedTailRecords. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5550
Test Plan: Run the test in UBSAN. It used to fail. Not it succeeds.
Differential Revision: D16165516
fbshipit-source-id: 42c56a6bc64eb091f054b87757fcbef60da825f7
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Choose to preload some files if options.max_open_files != -1. This can slightly narrow the gap of performance between options.max_open_files is -1 and a large number. To avoid a significant regression to DB reopen speed if options.max_open_files != -1. Limit the files to preload in DB open time to 16.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3340
Differential Revision: D6686945
Pulled By: siying
fbshipit-source-id: 8ec11bbdb46e3d0cdee7b6ad5897a09c5a07869f
Summary:
Call `SyncClosedLogs()` only if there are more than one column families.
Update several unit tests (in `fault_injection_test` and `db_flush_test`) correspondingly.
See #3840 for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4460
Differential Revision: D12896377
Pulled By: riversand963
fbshipit-source-id: f49afdaec32568f12f001219a3aec1dfde3b32bf
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Improve log handling when avoid_flush_during_recovery=true.
1. restore total_log_size_ after recovery, by summing up existing log sizes. Fixes#4253.
2. truncate the last existing log, since this log can contain preallocated space and it will be a waste to keep the space. It avoids a crash loop of user application cause a lot of log with non-trivial size being created and ultimately take up all disk space.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4405
Differential Revision: D9953933
Pulled By: yiwu-arbug
fbshipit-source-id: 967780fee8acec7f358b6eb65190fb4684f82e56
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
This reverts commit 73f21a7b21.
It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:
"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"
This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762
Differential Revision: D7730035
Pulled By: siying
fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488
Differential Revision: D6967893
Pulled By: maysamyabandeh
fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205
Differential Revision: D6438959
Pulled By: maysamyabandeh
fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
Summary:
Context/problem:
- CFs may be flushed at different times
- A WAL can only be deleted after all CFs have flushed beyond end of that WAL.
- Point-in-time recovery might stop upon reaching the first corruption.
- Some CFs may have already flushed beyond that point, while others haven't. We should fail the Open() instead of proceeding with inconsistent CFs.
Closes https://github.com/facebook/rocksdb/pull/2900
Differential Revision: D5863281
Pulled By: miasantreble
fbshipit-source-id: 180dbaf83d96c804cff49b3c406312a4ae61313e
Summary:
Our current implementation of (semi-)copy constructor of DBOptions and ColumnFamilyOptions seems to intend value by value copy, which is what the default copy constructor does anyway. Moreover not using the default constructor has the risk of forgetting to add newly added options.
As an example, allow_2pc seems to be forgotten in the copy constructor which was causing one of the unit tests not seeing its effect.
Closes https://github.com/facebook/rocksdb/pull/2888
Differential Revision: D5846368
Pulled By: maysamyabandeh
fbshipit-source-id: 1ee92a2aeae93886754b7bc039c3411ea2458683
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Avoid to run db_wal_test in all the DB test options, and some small changes.
Closes https://github.com/facebook/rocksdb/pull/1921
Differential Revision: D4622054
Pulled By: siying
fbshipit-source-id: 890fd64
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
Originally sequence ids were calculated, in recovery, based off of the first seqid found if the first log recovered. The working seqid was then incremented from that value based on every insertion that took place. This was faulty because of the potential for missing log files or inserts that skipped the WAL. The current recovery scheme grabs sequence from current recovering batch and increments using memtableinserter to track how many actual inserts take place. This works for 2PC batches as well scenarios where some logs are missing or inserts that skip the WAL.
Closes https://github.com/facebook/rocksdb/pull/1486
Differential Revision: D4156064
Pulled By: reidHoruff
fbshipit-source-id: a6da8d9
Summary:
Previously the WAL files that were avoided during recovery would never
be considered for deletion. That was because alive_log_files_ was only
populated when log files are created. This diff further populates
alive_log_files_ with existing log files that aren't flushed during recovery,
such that FindObsoleteFiles() can find them later.
Depends on D64053.
Test Plan: new unit test, verifies it fails before this change and passes after
Reviewers: sdong, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64059
Summary:
This reverts commit 9e4aa798c3,
which doesn't handle all cases (see inline comment).
I reimplemented the logic as suggested in the initial PR: https://github.com/facebook/rocksdb/pull/1313.
This approach has two benefits:
- All the parsing/filtering of full_scan_candidate_files is kept together in PurgeObsoleteFiles.
- We only need to check whether log file is recycled in one place where we've already determined it's a log file
Test Plan:
new unit test, verified fails before the original fix, still passes
now.
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: yiwu, sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64053
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.
Test Plan: Add a unit test.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63957
Adam Retter