5 Commits (a8a422e96205015ab9a32cfdb89a48c3f831e8a9)

Author	SHA1	Message	Date
Peter Dillinger	230660be73	Improve / clean up meta block code & integrity (#9163) ... Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9	3 years ago
Peter Dillinger	dfedc74d82	Some checksum code refactoring (#9113) ... Summary: To prepare for adding checksum to footer and "context aware" checksums. This also brings closely related code much closer together. Recently added `BlockBasedTableBuilder::ComputeBlockTrailer` for testing is made obsolete in the refactoring, as testing the checksums can happen at a lower level of abstraction. Also now checking for unrecognized checksum type on reading footer, rather than later on use. Also removed an obsolete function delcaration. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9113 Test Plan: existing tests worked before refactoring to remove `ComputeBlockTrailer`. And then refactored+improved tests using it. Reviewed By: mrambacher Differential Revision: D32090149 Pulled By: pdillinger fbshipit-source-id: 2879da683c1498ea85a3b70dace9b6d9f6b47b6e	3 years ago
Peter Dillinger	a7d4bea43a	Implement XXH3 block checksum type (#9069) ... Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1	3 years ago
Peter Dillinger	25a0d0ca30	Fix block checksum for >=4GB, refactor (#6978) ... Summary: Although RocksDB falls over in various other ways with KVs around 4GB or more, this change fixes how XXH32 and XXH64 were being called by the block checksum code to support >= 4GB in case that should ever happen, or the code copied for other uses. This change is not a schema compatibility issue because the checksum verification code would checksum the first (block_size + 1) mod 2^32 bytes while the checksum construction code would checksum the first block_size mod 2^32 plus the compression type byte, meaning the XXH32/64 checksums for >=4GB block would not match about 255/256 times. While touching this code, I refactored to consolidate redundant implementations, improving diagnostics and performance tracking in some cases. Also used less confusing language in those diagnostics. Makes https://github.com/facebook/rocksdb/issues/6875 obsolete. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6978 Test Plan: I was able to write a test for this using an SST file writer and VerifyChecksum in a reader. The test fails before the fix, though I'm leaving the test disabled because I don't think it's worth the expense of running regularly. Reviewed By: gg814 Differential Revision: D22143260 Pulled By: pdillinger fbshipit-source-id: 982993d16134e8c50bea2269047f901c1783726e	4 years ago
sdong	674cf41732	Divide block_based_table_reader.cc (#6527) ... Summary: block_based_table_reader.cc is a giant file, which makes it hard for users to navigate the code. Divide the files to multiple files. Some class templates cannot be moved to .cc file. They are moved to .h files. It is still better than including them all in block_based_table_reader.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6527 Test Plan: "make all check" and "make release". Also build using cmake. Differential Revision: D20428455 fbshipit-source-id: ca713c698469f07f35bc0c271358c0874ed4eb28	5 years ago