Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Hi there,
This PR fixes a few typos in comments in `cache/lru_cache.h`.
Thanks
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7687
Reviewed By: ajkr
Differential Revision: D25064674
Pulled By: jay-zhuang
fbshipit-source-id: fe633369d5b82c5aac42d4ee8d551b9d657237d1
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
A generic algorithm in progress depends on a templatized
version of fastrange, so this change generalizes it and renames
it to fit our style guidelines, FastRange32, FastRange64, and now
FastRangeGeneric.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7436
Test Plan: added a few more test cases
Reviewed By: jay-zhuang
Differential Revision: D23958153
Pulled By: pdillinger
fbshipit-source-id: 8c3b76101653417804997e5f076623a25586f3e8
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
Added code for generically handing structs to OptionTypeInfo. A struct is a collection of variables handled by their own map of OptionTypeInfos. Examples of structs include Compaction and Cache options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6425
Reviewed By: siying
Differential Revision: D21668789
Pulled By: zhichao-cao
fbshipit-source-id: 064b110de39dadf82361ed4663f7ac1a535b0b07
Summary:
Added functions for parsing, serializing, and comparing elements to OptionTypeInfo. These functions allow all of the special cases that could not be handled directly in the map of OptionTypeInfo to be moved into the map. Using these functions, every type can be handled via the map rather than special cased.
By adding these functions, the code for handling options can become more standardized (fewer special cases) and (eventually) handled completely by common classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6422
Test Plan: pass make check
Reviewed By: siying
Differential Revision: D21269005
Pulled By: zhichao-cao
fbshipit-source-id: 9ba71c721a38ebf9ee88259d60bd81b3282b9077
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.
Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.
Example with full filter thrashing "cliff":
$ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
...
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 14181
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 476
rocksdb.block.cache.data.add COUNT : 12749
rocksdb.block.cache.data.add.redundant COUNT : 18
rocksdb.block.cache.filter.add COUNT : 1003
rocksdb.block.cache.filter.add.redundant COUNT : 217
rocksdb.block.cache.index.add COUNT : 429
rocksdb.block.cache.index.add.redundant COUNT : 241
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 1182223
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 302728
rocksdb.block.cache.data.add COUNT : 31425
rocksdb.block.cache.data.add.redundant COUNT : 12
rocksdb.block.cache.filter.add COUNT : 795455
rocksdb.block.cache.filter.add.redundant COUNT : 130238
rocksdb.block.cache.index.add COUNT : 355343
rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681
Test Plan: Some manual testing (above) and unit test covering key metrics is included
Reviewed By: ltamasi
Differential Revision: D21134113
Pulled By: pdillinger
fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
Summary:
I suspect LRUCache could use some optimization, and to support
such an effort, a good benchmarking tool is needed. The existing
cache_bench was heavily skewed toward insertion and lookup misses, and
did not saturate memory with other work. This change should improve
those things to better resemble a real workload.
(All below using clang compiler, for some consistency, but not
necessarily same version and settings.)
The real workload is from production MySQL on RocksDB, filtering stacks
containing "LRU", "ShardedCache" or "CacheShard."
Lookup inclusive: 66%
Insert inclusive: 17%
Release inclusive: 15%
An alternate simulated workload is MySQL running a LinkBench read test:
Lookup inclusive: 54%
Insert inclusive: 24%
Release inclusive: 21%
cache_bench default settings, prior to this change:
Lookup inclusive: 35.8%
Insert inclusive: 63.6%
Release inclusive: 0%
cache_bench after this change (intended as somewhat "tighter" workload
than average production, more like LinkBench):
Lookup inclusive: 52%
Insert inclusive: 20%
Release inclusive: 26%
And top exclusive stacks (portion of stack samples as filtered above):
Production MySQL:
LRUHandleTable::FindPointer: 25.3%
rocksdb::operator==: 15.1% <-- Slice ==
LRUCacheShard::LRU_Remove: 13.8%
ShardedCache::Lookup: 8.9%
__pthread_mutex_lock: 7.1%
LRUCacheShard::LRU_Insert: 6.3%
MurmurHash64A: 4.8% <-- Since upgraded to XXH3p
...
Old cache_bench:
LRUHandleTable::FindPointer: 23.6%
__pthread_mutex_lock: 15.0%
__pthread_mutex_unlock_usercnt: 11.7%
__lll_lock_wait: 8.6%
__lll_unlock_wake: 6.8%
LRUCacheShard::LRU_Insert: 6.0%
ShardedCache::Lookup: 4.4%
LRUCacheShard::LRU_Remove: 2.8%
...
rocksdb::operator==: 0.2% <-- Slice ==
...
New cache_bench:
LRUHandleTable::FindPointer: 22.8%
__pthread_mutex_unlock_usercnt: 14.3%
rocksdb::operator==: 10.5% <-- Slice ==
LRUCacheShard::LRU_Insert: 9.0%
__pthread_mutex_lock: 5.9%
LRUCacheShard::LRU_Remove: 5.0%
...
ShardedCache::Lookup: 2.9%
...
So there's a bit more lock contention in the benchmark than in
production, but otherwise looks similar enough to me. At least it's a
big improvement over the existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6629
Test Plan: No production code changes, ran cache_bench with ASAN
Reviewed By: ltamasi
Differential Revision: D20824318
Pulled By: pdillinger
fbshipit-source-id: 6f8dc5891ead0f87edbed3a615ecd5289d9abe12
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545
Test Plan: `make asan_check`
Reviewed By: siying
Differential Revision: D20475823
Pulled By: ltamasi
fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Inserting an entry in the block cache with 0 length key is a valid use case. Remove the assertion in ```LRUHandle::CalcTotalCharge```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6115
Differential Revision: D18769693
Pulled By: anand1976
fbshipit-source-id: 34cc159650300dda6d7273480640478f28392cda
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
https://github.com/facebook/rocksdb/issues/5797 charges the block cache with the total of user-provided charge plus the metadata charge. It had a bug where in MaintainPoolSize the user-provided charge was used instead of the total charge. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5813
Differential Revision: D17412783
Pulled By: maysamyabandeh
fbshipit-source-id: 45c0ac9f1e2233760db5ccd61399605cd74edc87
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
The 'refs' field in LRUHandle now counts only external references, since anyway we already have the IN_CACHE flag. This simplifies reference accounting logic a bit. Also cleaned up few asserts code as well as the comments - to be more readable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5579
Differential Revision: D16286747
Pulled By: elipoz
fbshipit-source-id: 7186d88f80f512ce584d0a303437494b5cbefd7f
Summary:
Mid-point insertion is a useful feature and is mature now. Make it default. Also changed cache_index_and_filter_blocks_with_high_priority=true as default accordingly, so that we won't evict index and filter blocks easier after the change, to avoid too many surprises to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5508
Test Plan: Run all existing tests.
Differential Revision: D16021179
fbshipit-source-id: ce8456e8d43b3bfb48df6c304b5290a9d19817eb
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Create new function NPHash64() and GetSliceNPHash64(), which are currently
implemented using murmurhash.
Replace the current direct call of murmurhash() to use the new functions
if the hash results are not used in on-disk format.
This will make it easier to try out or switch to alternative functions
in the uses where data format compatibility doesn't need to be considered.
This part shouldn't have any performance impact.
Also, the sharded cache hash function is changed to the new format, because
it falls into this categoery. It doesn't show visible performance impact
in db_bench results. CPU showed by perf is increased from about 0.2% to 0.4%
in an extreme benchmark setting (4KB blocks, no-compression, everything
cached in block cache). We've known that the current hash function used,
our own Hash() has serious hash quality problem. It can generate a lots of
conflicts with similar input. In this use case, it means extra lock contention
for reads from the same file. This slight CPU regression is worthy to me
to counter the potential bad performance with hot keys. And hopefully this
will get further improved in the future with a better hash function.
cache_test's condition is relaxed a little bit to. The new hash is slightly
more skewed in this use case, but I manually checked the data and see
the hash results are still in a reasonable range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5155
Differential Revision: D14834821
Pulled By: siying
fbshipit-source-id: ec9a2c0a2f8ae4b54d08b13a5c2e9cc97aa80cb5
Summary:
cache functions heavily use virtual functions.
Add some "final" annotations to give compilers more information
to optimize. The compiler doesn't seem to take advantage of it
though. But it doesn't hurt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5156
Differential Revision: D14814837
Pulled By: siying
fbshipit-source-id: 4423f58eafc93f7dd3c5f04b02b5c993dba2ea94
Summary:
The code convention we are following, Google C++ Style, discourage
alias in header files, especially public headers:
https://google.github.io/styleguide/cppguide.html#Aliases
Remove some of them. Might removed some from .cc files as well to be consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5113
Differential Revision: D14633030
Pulled By: siying
fbshipit-source-id: b990edc919d5de60295992284f980195e501d424
Summary:
The patch adds a new config option to LRUCacheOptions that enables
users to choose whether to use an adaptive mutex for the LRU block
cache (on platforms where adaptive mutexes are supported). The default
is true if RocksDB is compiled with -DROCKSDB_DEFAULT_TO_ADAPTIVE_MUTEX,
false otherwise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5054
Differential Revision: D14542749
Pulled By: ltamasi
fbshipit-source-id: 0065715ab6cf91f10444b737fed8c8aee6a8a0d2
Summary:
Replace the integers used for setting and querying the various
flags in LRUHandle with enum values to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5024
Differential Revision: D14263429
Pulled By: ltamasi
fbshipit-source-id: b1b9ba95635265f122c2b40da73850eaac18227a
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
This PR supports the group commit of multiple version edit entries corresponding to different column families. Column family drop/creation still cannot be grouped. This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Closes https://github.com/facebook/rocksdb/pull/3944
Differential Revision: D8432536
Pulled By: riversand963
fbshipit-source-id: 8f11bd05193b6c0d9272d82e44b676abfac113cb
Summary:
Instead of __SANITIZE_ADDRESS__ macro, LLVM uses __has_feature(address_sanitzer) to check if ASAN is enabled for the build. I tested it with MySQL sanitizer build that uses RocksDB as a submodule.
Closes https://github.com/facebook/rocksdb/pull/4066
Reviewed By: riversand963
Differential Revision: D8668941
Pulled By: taewookoh
fbshipit-source-id: af4d1da180c1470d257a228f431eebc61490bc36
Summary:
Implement midpoint insertion strategy where new blocks will be insert to the middle of LRU list, then move the head on the first hit in cache.
Closes https://github.com/facebook/rocksdb/pull/3877
Differential Revision: D8100895
Pulled By: yiwu-arbug
fbshipit-source-id: f4bd83cb8be469e5d02072cfc8bd66011391f3da
Summary:
Update LRUCacheShard constructor so that adding new params to it don't need to add extra SetXXX() methods.
Closes https://github.com/facebook/rocksdb/pull/3896
Differential Revision: D8128618
Pulled By: yiwu-arbug
fbshipit-source-id: 6afa715de1493a50de413678761a765e3af9b83b
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Jay Zhuang