36 Commits (b1b6f87fbe27500f93388322eaaf57d41d7416d3)

Author	SHA1	Message	Date
Changyu Bi	854eb76a8c	Improve error message when an SST file in MANIFEST is not found (#11573) ... Summary: I got the following error message when an SST file is recorded in MANIFEST but is missing from the db folder. It's confusing in two ways: 1. The part about file "./074837.ldb" which RocksDB will attempt to open only after ./074837.sst is not found. 2. The last part about "No such file or directory in file ./MANIFEST-074507" sounds like `074837.ldb` is not found in manifest. ``` ldb --hex --db=. get some_key Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.ldb: No such file or directory in file ./MANIFEST-074507 ``` Improving the error message a little bit: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11573 Test Plan: run the same command after this PR ``` Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.sst: No such file or directory The file ./MANIFEST-074507 may be corrupted. ``` Reviewed By: ajkr Differential Revision: D47192056 Pulled By: cbi42 fbshipit-source-id: 06863f376cc4455803cffb2250c41399b4c39467	1 year ago
Yu Zhang	f74526341d	Handle file boundaries when timestamps should not be persisted (#11578) ... Summary: Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false: 1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries. 2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578 Test Plan: ``` make all check ./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*". ./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*" ``` Reviewed By: pdillinger Differential Revision: D47309399 Pulled By: jowlyzhang fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51	1 year ago
Changyu Bi	62fc15f009	Block per key-value checksum (#11287) ... Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940	2 years ago
Hui Xiao	151242ce46	Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) ... Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132	2 years ago
Jaepil Jeong	969d4e1dd2	Fix compile errors in Clang due to unused variables depending on the build configuration (#11234) ... Summary: This PR fixes compilation errors in Clang due to unused variables like the below: ``` [109/329] Building CXX object CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o FAILED: CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o ccache /opt/homebrew/opt/llvm/bin/clang++ -DGFLAGS=1 -DGFLAGS_IS_A_DLL=0 -DHAVE_FULLFSYNC -DJEMALLOC_NO_DEMANGLE -DLZ4 -DOS_MACOSX -DROCKSDB_JEMALLOC -DROCKSDB_LIB_IO_POSIX -DROCKSDB_NO_DYNAMIC_EXTENSION -DROCKSDB_PLATFORM_POSIX -DSNAPPY -DTBB -DZLIB -DZSTD -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/include -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -I/Users/jaepil/app/include -I/opt/homebrew/include -I/opt/homebrew/opt/llvm/include -I/opt/homebrew/opt/llvm/include/c++/v1 -W -Wextra -Wall -pthread -Wsign-compare -Wshadow -Wno-unused-parameter -Wno-unused-variable -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -Wno-strict-aliasing -Wno-invalid-offsetof -fno-omit-frame-pointer -momit-leaf-frame-pointer -march=armv8-a+crc+crypto -Wno-unused-function -Werror -O2 -g -DNDEBUG -arch arm64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.1.sdk -std=gnu++20 -MD -MT CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o -MF CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o.d -o CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o -c /Users/jaepil/work/deepsearch/deps/cpp/rocksdb/db/version_edit_handler.cc /Users/jaepil/work/deepsearch/deps/cpp/rocksdb/db/version_edit_handler.cc:30:10: error: variable 'recovered_edits' set but not used [-Werror,-Wunused-but-set-variable] size_t recovered_edits = 0; ^ 1 error generated. ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11234 Reviewed By: cbi42 Differential Revision: D43458604 Pulled By: ajkr fbshipit-source-id: d8c50e1a108887b037a120cd9f19374ddaeee817	2 years ago
Hui Xiao	98d5db5c2e	Sort L0 files by newly introduced epoch_num (#10922) ... Summary: **Context:** Sorting L0 files by `largest_seqno` has at least two inconvenience: - File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap. - For example, consider the following sequence of events ("key@n" indicates key at seqno "n") - insert k1@1 to memtable m1 - ingest file s1 with k2@2, ingest file s2 with k3@3 - insert k4@4 to m1 - compact files s1, s2 and result in new file s3 of seqno range [2, 3] - flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1 - However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption. - Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption - For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example) - an existing SST s1 contains only k1@1 - insert k1@2 to memtable m1 - ingest file s2 with k3@3, ingest file s3 with k4@4 - insert single delete k5@5 in m1 - flush m1 and result in new file s4 of seqno range [2, 5] - compact s1, s2, s3 and result in new file s5 of seqno range [1, 4] - compact s4 and result in new file s6 of seqno range [2] due to single delete - By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno` Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways: - In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more. - In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption. **Summary:** - Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`. - `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`) - Compaction output file is assigned with the minimum `epoch_number` among input files' - Refit level: reuse refitted file's epoch_number - Other paths needing `epoch_number` treatment: - Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo` - Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`. - Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair). - Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder. - Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery - Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more - Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag` - Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above - Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`. - Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR. - Misc: - update existing tests with `epoch_number` so make check will pass - update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases - assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber() Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922 Test Plan: - `make check` - New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc` - Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930 - [Ongoing] Compatibility test: manually run 36a5686ec0 (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox` - [Ongoing] normal db stress test - [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761 Reviewed By: ajkr Differential Revision: D41063187 Pulled By: hx235 fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9	2 years ago
Yanqin Jin	3d0d6b8140	Make best-efforts recovery verify SST unique ID before Version construction (#10962) ... Summary: The check for SST unique IDs added to best-efforts recovery (`Options::best_efforts_recovery` is true). With best_efforts_recovery being true, RocksDB will recover to the latest point in MANIFEST such that all valid SST files included up to this point pass unique ID checks as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10962 Test Plan: make check Reviewed By: pdillinger Differential Revision: D41378241 Pulled By: riversand963 fbshipit-source-id: a036064e2c17dec13d080a24ef2a9f85d607b16c	2 years ago
Gang Liao	deff48bcef	Add blob source to retrieve blobs in RocksDB (#10198) ... Summary: There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache. In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost. Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel! This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198 Reviewed By: ltamasi Differential Revision: D37294735 Pulled By: gangliao fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e	2 years ago
Yanqin Jin	e0c84aa0dc	Fix a race condition in WAL tracking causing DB open failure (#9715) ... Summary: There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC. The race condition is between two background flush threads trying to install flush results to the MANIFEST. Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially, both column families have one mutable (active) memtable whose data backed by 6.log. 1. Trigger a manual flush for "cf1", creating a 7.log 2. Insert another key to "default", and trigger flush for "default", creating 8.log 3. BgFlushThread1 finishes writing 9.sst 4. BgFlushThread2 finishes writing 10.sst ``` Time BgFlushThread1 BgFlushThread2 | mutex_.Lock() | precompute min_wal_to_keep as 6 | mutex_.Unlock() | mutex_.Lock() | precompute min_wal_to_keep as 6 | join MANIFEST write queue and mutex_.Unlock() | write to MANIFEST | mutex_.Lock() | cfd1->log_number = 7 | Signal bg_flush_2 and mutex_.Unlock() | wake up and mutex_.Lock() | cfd0->log_number = 8 | FindObsoleteFiles() with job_context->log_number == 7 | mutex_.Unlock() | PurgeObsoleteFiles() deletes 6.log V ``` As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6). Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6). No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`, due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514. The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e. the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist. If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true. We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know the correct min wal number until the other bg flush threads have finished committing to the manifest and updated the `cfd::log_number`. To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`, and use it to track WAL file deletion in non-2pc mode as well. This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread. `min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715 Test Plan: ``` make check ``` Also ran stress test below (with asan) to make sure it completes successfully. ``` TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \ CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \ make J=52 -j52 blackbox_asan_crash_test ``` Reviewed By: ltamasi Differential Revision: D34984412 Pulled By: riversand963 fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005	3 years ago
Levi Tamasi	42e0751b3a	Clean up VersionStorageInfo a bit (#9494) ... Summary: The patch does some cleanup in and around `VersionStorageInfo`: * Renames the method `PrepareApply` to `PrepareAppend` in `Version` to make it clear that it is to be called before appending the `Version` to `VersionSet` (via `AppendVersion`), not before applying any `VersionEdit`s. * Introduces a helper method `VersionStorageInfo::PrepareForVersionAppend` (called by `Version::PrepareAppend`) that encapsulates the population of the various derived data structures in `VersionStorageInfo`, and turns the methods computing the derived structures (`UpdateNumNonEmptyLevels`, `CalculateBaseBytes` etc.) into private helpers. * Changes `Version::PrepareAppend` so it only calls `UpdateAccumulatedStats` if the `update_stats` flag is set. (Earlier, this was checked by the callee.) Related to this, it also moves the call to `ComputeCompensatedSizes` to `VersionStorageInfo::PrepareForVersionAppend`. * Updates and cleans up `version_builder_test`, `version_set_test`, and `compaction_picker_test` so `PrepareForVersionAppend` is called anytime a new `VersionStorageInfo` is set up or saved. This cleanup also involves splitting `VersionStorageInfoTest.MaxBytesForLevelDynamic` into multiple smaller test cases. * Fixes up a bunch of comments that were outdated or just plain incorrect. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9494 Test Plan: Ran `make check` and the crash test script for a while. Reviewed By: riversand963 Differential Revision: D33971666 Pulled By: ltamasi fbshipit-source-id: fda52faac7783041126e4f8dec0fe01bdcadf65a	3 years ago
Peter Dillinger	fc9d4071f0	Fast path for detecting unchanged prefix_extractor (#9407) ... Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76	3 years ago
jsteemann	255aefb628	Add filename to several Corruption messages (#9239) ... Summary: This change adds the filename of the offending filen to several place that produce Status objects with code `kCorruption`. This is not an attempt to have every Corruption message in the codebase extended with the filename, but it is a start. The motivation for the change was to quickly diagnose which file is corrupted when a large database is openend and there is not option to copy it offsite for analysis, run strace or install the ldb tool. In the particular case in question, the error message improved from a mere ``` Corruption: checksum mismatch ``` to ``` Corruption: checksum mismatch in file /path/to/db/engine-rocksdb/MANIFEST-000171 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9239 Reviewed By: jay-zhuang Differential Revision: D33237742 Pulled By: riversand963 fbshipit-source-id: bd42559cfbf786a0a674d091671d1a2bf07bdd31	3 years ago
Andrew Kryczka	b860a42158	Recover to exact latest seqno of data committed to MANIFEST (#9305) ... Summary: The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno. Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file. Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305 Test Plan: - https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases - https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion - Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files - Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`) Reviewed By: riversand963 Differential Revision: D33182770 Pulled By: ajkr fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d	3 years ago
Yanqin Jin	43ac7a2774	Fix an assertion failure when ManifestTailer switches to new Manifest in multi-cf mode (#9143) ... Summary: Original unit test fail to test the case of multi-cf mode switching to new manifest. The assertion failure will trigger when the primary instance reopens and secondary continues to tail the newly-created MANIFEST. Fix the assertion failure and update existing unit tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9143 Test Plan: make check Reviewed By: ltamasi Differential Revision: D32574233 Pulled By: riversand963 fbshipit-source-id: 857ddbe994019091276458abebcf8e2b65340468	3 years ago
Peter Dillinger	230660be73	Improve / clean up meta block code & integrity (#9163) ... Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9	3 years ago
mrambacher	13ae16c315	Cleanup includes in dbformat.h (#8930) ... Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d	3 years ago
Yanqin Jin	f235f4b0a3	Fix a bug of secondary instance sequence going backward (#8653) ... Summary: Recent refactor of `ReactiveVersionSet::ReadAndApply()` uses `ManifestTailer` whose `Iterate()` method can cause the db's `last_sequence_` to go backward. Consequently, read requests can see out-dated data. For example, latest changes to the primary will not be seen on the secondary even after a `TryCatchUpWithPrimary()` if no new write batches are read from the WALs and no new MANIFEST entries are read from the MANIFEST. Fix the bug so that `VersionEditHandler::CheckIterationResult` will never decrease `last_sequence_`, `last_allocated_sequence_` and `last_published_sequence_`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8653 Test Plan: make check Reviewed By: jay-zhuang Differential Revision: D30272084 Pulled By: riversand963 fbshipit-source-id: c6a49c534b2509b93ef62d8936ed0acd5b860eaa	3 years ago
Baptiste Lemaire	c521a9ab2b	Retire superfluous functions introduced in earlier mempurge PRs. (#8558) ... Summary: The main challenge to make the memtable garbage collection prototype (nicknamed `mempurge`) was to not get rid of WAL files that contain unflushed (but mempurged) data. That was successfully guaranteed by not writing the VersionEdit to the MANIFEST file after a successful mempurge. By not writing VersionEdits to the `MANIFEST` file after a succesful mempurge operation, we do not change the earliest log file number that contains unflushed data: `cfd->GetLogNumber()` (`cfd->SetLogNumber()` is only called in `VersionSet::ProcessManifestWrites`). As a result, a number of functions introduced earlier just for the mempurge operation are not obscolete/redundant. (e.g.: `FlushJob::ExtractEarliestLogFileNumber`), and this PR aims at cleaning up all these now-unnecessary functions. In particular, we no longer need to store the earliest log file number in the `MemTable` struct itself. This PR therefore also reverts the `MemTable` struct to its original form. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8558 Test Plan: Already included in `db_flush_test.cc`. Reviewed By: anand1976 Differential Revision: D29764351 Pulled By: bjlemaire fbshipit-source-id: 0f43b260fa270251862512f397d3f24ee62e8437	3 years ago
Baptiste Lemaire	206845c057	Mempurge support for wal (#8528) ... Summary: In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables. The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables. This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528 Reviewed By: pdillinger Differential Revision: D29701097 Pulled By: bjlemaire fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9	3 years ago
Baptiste Lemaire	d61a449364	Fixed manifest_dump issues when printing keys and values containing null characters (#8378) ... Summary: Changed fprintf function to fputc in ApplyVersionEdit, and replaced null characters with whitespaces. Added unit test in ldb_test.py - verifies that manifest_dump --verbose output is correct when keys and values containing null characters are inserted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8378 Reviewed By: pdillinger Differential Revision: D29034584 Pulled By: bjlemaire fbshipit-source-id: 50833687a8a5f726e247c38457eadc3e6dbab862	3 years ago
Yanqin Jin	314352761f	Ignore comparator name mismatch in ldb manifest dump (#8216) ... Summary: RocksDB allows user-specified custom comparators which may not be known to `ldb`, a built-in tool for checking/mutating the database. Therefore, column family comparator names mismatch encountered during manifest dump should not prevent the dumping from proceeding. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8216 Test Plan: ``` make check ``` Also manually do the following ``` KEEP_DB=1 ./db_with_timestamp_basic_test ./ldb --db=<db> manifest_dump --verbose ``` The ldb should succeed and print something like: ``` ... --------------- Column family "default" (ID 0) -------------- log number: 6 comparator: <TestComparator>, but the comparator object is not available. ... ``` Reviewed By: ltamasi Differential Revision: D27927581 Pulled By: riversand963 fbshipit-source-id: f610b2c842187d17f575362070209ee6b74ec6d4	4 years ago
Yanqin Jin	b0e20194ea	Handle blob files when options.best_efforts_recovery is true (#8180) ... Summary: If `options.best_efforts_recovery == true`, RocksDB currently tolerates missing table files and recovers to the latest version without missing table files (not considering WAL). It is necessary to handle blob files as well to make the feature more complete. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8180 Test Plan: make check Reviewed By: ltamasi Differential Revision: D27840556 Pulled By: riversand963 fbshipit-source-id: 041685d0dc2e7779ac4f0374c07a8a327704aa5e	4 years ago
Yanqin Jin	64517d184a	Make secondary instance use ManifestTailer (#7998) ... Summary: This PR - adds a class `ManifestTailer` that inherits from `VersionEditHandlerPointInTime`. `ManifestTailer::Iterate()` can be called multiple times to tail the primary instance's MANIFEST and apply the changes to the secondary, - updates the implementation of `ReactiveVersionSet::ReadAndApply` to use this class, - removes unused code in version_set.cc, - updates existing tests, e.g. removing deleted sync points from unit tests, - adds a new test to address the bug in https://github.com/facebook/rocksdb/issues/7815. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7998 Test Plan: make check Existing and newly-added tests in version_set_test.cc and db_secondary_test.cc Reviewed By: jay-zhuang Differential Revision: D26926641 Pulled By: riversand963 fbshipit-source-id: 8d4dd15db0ba863c213f743e33b5a207e948c980	4 years ago
Akanksha Mahajan	f19612970d	Support retrieving checksums for blob files from the MANIFEST when checkpointing (#8003) ... Summary: The checkpointing logic supports passing file level checksums to the copy_file_cb callback function which is used by the backup code for detecting corruption during file copies. However, this is currently implemented only for table files. This PR extends the checksum retrieval to blob files as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8003 Test Plan: Add new test units Reviewed By: ltamasi Differential Revision: D26680701 Pulled By: akankshamahajan15 fbshipit-source-id: 1bd1e2464df6e9aa31091d35b8c72786d94cd1c5	4 years ago
mrambacher	cc2a180d00	Add more tests to the ASC pass list (#7834) ... Summary: Fixed the following to now pass ASC checks: * `ttl_test` * `blob_db_test` * `backupable_db_test`, * `delete_scheduler_test` Pull Request resolved: https://github.com/facebook/rocksdb/pull/7834 Reviewed By: jay-zhuang Differential Revision: D25795398 Pulled By: ajkr fbshipit-source-id: a10037817deda4fc7cbb353a2e00b62ed89b6476	4 years ago
Yanqin Jin	eee0af9af1	Add full_history_ts_low to column family (#7740) ... Summary: Following https://github.com/facebook/rocksdb/issues/7655 and https://github.com/facebook/rocksdb/issues/7657, this PR adds `full_history_ts_low_` to `ColumnFamilyData`. `ColumnFamilyData::full_history_ts_low_` will be used to create `FlushJob` and `CompactionJob`. `ColumnFamilyData::full_history_ts_low` is persisted to the MANIFEST file. An application can only increase its value. Consider the following case: > > The database has a key at ts=950. `full_history_ts_low` is first set to 1000, and then a GC is triggered > and cleans up all data older than 1000. If the application sets `full_history_ts_low` to 900 afterwards, > and tries to read at ts=960, the key at 950 is not seen. From the perspective of the read, the result > is hard to reason. For simplicity, we just do now allow decreasing full_history_ts_low for now. > During recovery, the value of `full_history_ts_low` is restored for each column family if applicable. Note that version edits in the MANIFEST file for the same column family may have `full_history_ts_low` unsorted due to the potential interleaving of `LogAndApply` calls. Only the max will be used to restore the state of the column family. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7740 Test Plan: make check Reviewed By: ltamasi Differential Revision: D25296217 Pulled By: riversand963 fbshipit-source-id: 24acda1df8262cd7cfdc6ce7b0ec56438abe242a	4 years ago
Yanqin Jin	8b6b6aeb1a	Refactor with VersionEditHandler (#6581) ... Summary: Added a few classes in the same class hierarchy to remove code duplication and refactor the logic of reading and processing MANIFEST files. New classes are as follows. ``` class VersionEditHandlerBase; class ListColumnFamiliesHandler : VersionEditHandlerBase; class FileChecksumRetriever : VersionEditHandlerBase; class DumpManifestHandler : VersionEditHandler; ``` Classes that already existed before this PR are as follows. ``` class VersionEditHandler : VersionEditHandlerBase; ``` With these classes, refactored functions: `VersionSet::Recover()`, `VersionSet::ListColumnFamilies()`, `VersionSet::DumpManifest()`, `GetFileChecksumFromManifest()`. Test Plan (devserver): ``` make check COMPILE_WITH_ASAN=1 make check ``` These refactored code, especially recovery-related logic, will be tested intensively by all existing unit tests and stress tests. For example, run ``` make crash_test ``` Verified 3 successful runs on devserver. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6581 Reviewed By: ajkr Differential Revision: D20616217 Pulled By: riversand963 fbshipit-source-id: 048c7743aa4be2623ccd0cc3e61c0027e604e78b	4 years ago
Cheng Chang	1e40696dd1	Track WAL in MANIFEST: LogAndApply WAL events to MANIFEST (#7601) ... Summary: When a WAL is synced, an edit is written to MANIFEST. After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601 Test Plan: `track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test. Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated. Watch all tests to pass. Reviewed By: ltamasi Differential Revision: D24553957 Pulled By: cheng-chang fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040	4 years ago
Cheng Chang	1b224324b5	Track WAL in MANIFEST: persist WALs to and recover WALs from MANIFEST (#7256) ... Summary: This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s. The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256 Test Plan: a set of unit tests are added in `version_set_test.cc` Reviewed By: riversand963 Differential Revision: D23123238 Pulled By: cheng-chang fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c	4 years ago
Akanksha Mahajan	b175eceb09	Store FSWritableFilePtr object in WritableFileWriter (#7193) ... Summary: Replace FSWritableFile pointer with FSWritableFilePtr object in WritableFileWriter. This new object wraps FSWritableFile pointer. Objective: If tracing is enabled, FSWritableFile Ptr returns FSWritableFileTracingWrapper pointer that includes all necessary information in IORecord and calls underlying FileSystem and invokes IOTracer to dump that record in a binary file. If tracing is disabled then, underlying FileSystem pointer is returned directly. FSWritableFilePtr wrapper class is added to bypass the FSWritableFileWrapper when tracing is disabled. Test Plan: make check -j64 Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193 Reviewed By: anand1976 Differential Revision: D23355915 Pulled By: akankshamahajan15 fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf	4 years ago
Yanqin Jin	569b87e8c7	Fail recovery when MANIFEST record checksum mismatch (#6996) ... Summary: https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows. Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further. ``` // Correct // Inside Recover LogReporter reporter; reporter.status = &s; log::Reader reader(..., reporter); while (reader.ReadRecord() && s.ok()) { ... } ``` The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported. ``` // Incorrect // Inside Recover LogReporter reporter; reporter.status = &s; log::Reader reader(..., reporter); s = ReadAndRecover(reader, ...); // Inside ReadAndRecover Status s; // Shadows the s in Recover. while (reader.ReadRecord() && s.ok()) { ... } ``` `LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`. Test plan (devserver): make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996 Reviewed By: ajkr Differential Revision: D22105746 Pulled By: riversand963 fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38	4 years ago
Yanqin Jin	b7bab48099	Fix a bug of overwriting return code (#6989) ... Summary: In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989 Test Plan: make check Reviewed By: ajkr Differential Revision: D22071418 Pulled By: riversand963 fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b	4 years ago
Andrew Kryczka	02db03af8d	make L0 index/filter pinned memory usage predictable (#6911) ... Summary: Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889). Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911 Test Plan: unit test Reviewed By: siying Differential Revision: D21835818 Pulled By: ajkr fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4	5 years ago
Yanqin Jin	e72e2167fd	Fix a few bugs in best-efforts recovery (#6824) ... Summary: 1. Update column_family_memtables_ to point to latest column_family_set in version_set after recovery. 2. Normalize file paths passed by application so that directories end with '/' or '\\'. 3. In addition to missing files, corrupted files are also ignored in best-efforts recovery. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6824 Test Plan: COMPILE_WITH_ASAN=1 make check Reviewed By: anand1976 Differential Revision: D21463905 Pulled By: riversand963 fbshipit-source-id: c48db8843cc93c8c1c7139c474b64e6f775307d2	5 years ago
Yanqin Jin	5584595f80	Do not swallow error returned from SaveTo() (#6801) ... Summary: With consistency check enabled, VersionBuilder::SaveTo() may return error once corruption is detected while building versions. We should handle these errors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6801 Test Plan: make check Reviewed By: siying Differential Revision: D21385045 Pulled By: riversand963 fbshipit-source-id: 98f6424e2a4699b62befa21e9fe00e70a771118e	5 years ago
Yanqin Jin	fb09ef05dc	Attempt to recover from db with missing table files (#6334) ... Summary: There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status. This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version. `DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed. To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush. Test plan (on devserver): ``` $make check $COMPILE_WITH_ASAN=1 make all && make check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334 Reviewed By: anand1976 Differential Revision: D19778960 Pulled By: riversand963 fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8	5 years ago