Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026
Test Plan: watch tests to pass.
Reviewed By: zhichao-cao
Differential Revision: D22223197
fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
Summary:
Some tests directly uses TmpDir() as temporary directory without adding any randomize factor. This would cause failures when tests run in parallel. Fix it by moving some of them to test::PerThreadDBPath()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7030
Test Plan: Watch existing tests pass
Reviewed By: zhichao-cao
Differential Revision: D22224710
fbshipit-source-id: 28c9932fede0a4a64670e5b5fdb08f4fb5dccdd0
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
It's useful to build RocksDB using a more recent clang version in CI. Add a CircleCI build and fix some issues with it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7025
Test Plan: See all tests pass.
Reviewed By: pdillinger
Differential Revision: D22215700
fbshipit-source-id: 914a729c2cd3f3ac4a627cc0ac58d4691dca2168
Summary:
The constant `kNoExpiration` is currently defined in an
internal/implementation header (`blob_log_format.h`); the patch moves it
to the public header `blob_db.h` so it is accessible to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7018
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22191354
Pulled By: ltamasi
fbshipit-source-id: 98c8012a83b999a3f1a30e955ce6bb71ba29dc5c
Summary:
FlushAfterIntraL0CompactionCheckConsistencyFail is flakey. It sometimes fails with:
db/db_compaction_test.cc:5186: Failure
Expected equality of these values:
10
NumTableFilesAtLevel(0)
Which is: 3
I don't see a clear reason why the assertion would always be true. The necessarily of the assertion is not clear either. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7003
Test Plan: See the test still builds.
Reviewed By: riversand963
Differential Revision: D22129753
fbshipit-source-id: 42f0bb05e32b369e8d726bfd3e35c29cf52fe008
Summary:
Although RocksDB falls over in various other ways with KVs
around 4GB or more, this change fixes how XXH32 and XXH64 were being
called by the block checksum code to support >= 4GB in case that should
ever happen, or the code copied for other uses.
This change is not a schema compatibility issue because the checksum
verification code would checksum the first (block_size + 1) mod 2^32
bytes while the checksum construction code would checksum the first
block_size mod 2^32 plus the compression type byte, meaning the
XXH32/64 checksums for >=4GB block would not match about 255/256 times.
While touching this code, I refactored to consolidate redundant
implementations, improving diagnostics and performance tracking in some
cases. Also used less confusing language in those diagnostics.
Makes https://github.com/facebook/rocksdb/issues/6875 obsolete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6978
Test Plan:
I was able to write a test for this using an SST file writer
and VerifyChecksum in a reader. The test fails before the fix, though
I'm leaving the test disabled because I don't think it's worth the
expense of running regularly.
Reviewed By: gg814
Differential Revision: D22143260
Pulled By: pdillinger
fbshipit-source-id: 982993d16134e8c50bea2269047f901c1783726e
Summary:
The bug fixed in https://github.com/facebook/rocksdb/pull/1816/ is now applicable to iterator too. This was not an issue but https://github.com/facebook/rocksdb/pull/2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in https://github.com/facebook/rocksdb/issues/1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6973
Test Plan: Will run stress tests for a while to make sure there is no general regression.
Reviewed By: ajkr
Differential Revision: D22029348
fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990
Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.
Reviewed By: ltamasi
Differential Revision: D22072755
fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22071418
Pulled By: riversand963
fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
The `FileMetaData` objects associated with table files already contain the
number of the oldest blob file referenced by the SST in question. This patch
adds the inverse mapping to `BlobFileMetaData`, namely the set of table file
numbers for which the oldest blob file link points to the given blob file (these
are referred to as *linked SSTs*). This mapping will be used by the GC logic.
Implementation-wise, the patch builds on the `BlobFileMetaDataDelta`
functionality introduced in https://github.com/facebook/rocksdb/pull/6835: newly linked/unlinked SSTs are
accumulated in `BlobFileMetaDataDelta`, and the changes to the linked SST set
are applied in one shot when the new `Version` is saved. The patch also reworks
the blob file related consistency checks in `VersionBuilder` so they validate the
consistency of the forward table file -> blob file links and the backward blob file ->
table file links for blob files that are part of the `Version`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6945
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21912228
Pulled By: ltamasi
fbshipit-source-id: c5bc7acf6e729a8fccbb12672dd5cd00f6f000f8
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
https://github.com/facebook/rocksdb/pull/6901 subtly changed the handling of the corner case
when a table file is deleted from a level, then re-added to the same level. (Note: this
should be extremely rare; one scenario that comes to mind is a trivial move followed by
a call to `ReFitLevel` that moves the file back to the original level.) Before that change,
a new `FileMetaData` object was created as a result of this sequence; after the change,
the original `FileMetaData` was essentially resurrected (since the deletion and the addition
simply cancel each other out with the change). This patch restores the original behavior,
which is more intuitive considering the interface, and in sync with how trivial moves are handled.
(Also note that `FileMetaData` contains some mutable data members, the values of which
might be different in the resurrected object and the freshly created one.)
The PR also fixes a bug in this area: with the original pre-6901 code, `VersionBuilder`
would add the same file twice to the same level in the scenario described above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6939
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21905580
Pulled By: ltamasi
fbshipit-source-id: da07ae45384ecf3c6c53506d106432d88a7ec9df
Summary:
`DBTest2.CompressionFailures` currently tests many configurations
sequentially using nested loops, which often leads to timeouts
in our test system. The patch turns it into a parameterized test
instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6968
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D22006954
Pulled By: ltamasi
fbshipit-source-id: f71f2f7108086b7651ecfce3d79a7fab24620b2c
Summary:
Application can ingest SST files with file checksum information, such that during ingestion, DB is able to check data integrity and identify of the SST file. The PR introduces generate_and_verify_file_checksum to IngestExternalFileOption to control if the ingested checksum information should be verified with the generated checksum.
1. If generate_and_verify_file_checksum options is *FALSE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enables the SST file checksum and the checksum function name matches the checksum function name in DB, we trust the ingested checksum, store it in Manifest. If the checksum function name does not match, we treat that as an error and fail the IngestExternalFile() call.
2. If generate_and_verify_file_checksum options is *TRUE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enable the SST file checksum, we will use the checksum generator from DB to calculate the checksum for each ingested SST files after they are copied or moved. Then, compare the checksum results with the ingested checksum information: _A)_ if the checksum function name does not match, _verification always report true_ and we store the DB generated checksum information in Manifest. _B)_ if the checksum function name mach, and checksum match, ingestion continues and stores the checksum information in the Manifest. Otherwise, terminate file ingestion and report file corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6891
Test Plan: added unit test, pass make asan_check
Reviewed By: pdillinger
Differential Revision: D21935988
Pulled By: zhichao-cao
fbshipit-source-id: 7b55f486632db467e76d72602218d0658aa7f6ed
Summary:
This is required so that the test cases can safely be run in parallel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6962
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21980060
Pulled By: ltamasi
fbshipit-source-id: 616b7a0b686155d3874848b9098c67ad3f47efcc
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Summary:
The patch adds a convenience method `GetFileMetaDataByNumber` that
builds on the `FileLocation` functionality introduced recently (see
https://github.com/facebook/rocksdb/pull/6862). This method makes it possible to
retrieve the `FileMetaData` directly as opposed to having to go through
`LevelFiles` and friends.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6940
Test Plan: `make check`
Reviewed By: cheng-chang
Differential Revision: D21905946
Pulled By: ltamasi
fbshipit-source-id: af99e19de21242b2b4a87594a535c6028d16ee72
Summary:
In db_options.c, we should avoid including header files in the `db` directory to avoid introducing unnecessary dependency. The reason why `version_edit.h` has been included in `db_options.cc` is because we need two constants, `kUnknownChecksum` and `kUnknownChecksumFuncName`. We can put these two constants as `constexpr` in the public header `file_checksum.h`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6952
Reviewed By: zhichao-cao
Differential Revision: D21925341
Pulled By: riversand963
fbshipit-source-id: 2902f3b74c97f0cf16c58ad24c095c787c3a40e2
Summary:
RocksDB is an embedded library; we should not write to the application's
console. Note: in each case, the same information is returned in the form of a
`Status::Corruption` object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6948
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21914965
Pulled By: ltamasi
fbshipit-source-id: ae4b66789aa6b659eb8cc2ed4a048187962c86cc
Summary:
We currently do not have any validation that would ensure that the `FileMetaData`
objects are equivalent when a file gets deleted from the LSM tree and then re-added
(think trivial moves); however, if we did, this test case would be in violation. The patch
changes the values used in the test case so they are consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6942
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21911366
Pulled By: ltamasi
fbshipit-source-id: 2f0486f8337373a6a111b6f28433d70507857104
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.
Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909
Reviewed By: pdillinger
Differential Revision: D21833922
Pulled By: anand1976
fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
Summary:
Confusing checks for null that are never null
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6933
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D21885466
Pulled By: pdillinger
fbshipit-source-id: 4b48e03c2a33727f2702b0d12292f9fda5a3c475
Summary:
As title. The prior change to the line is a typo. Fixing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6928
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D21873587
Pulled By: riversand963
fbshipit-source-id: f4837fc8792d7106bc230b7b499dfbb7a2847430
Summary:
DB::OpenForReadOnly will not write anything to the file system (i.e., create directories or files for the DB) unless create_if_missing is true.
This change also fixes some subcommands of ldb, which write to the file system even if the purpose is for readonly.
Two tests for this updated behavior of DB::OpenForReadOnly are also added.
Other minor changes:
1. Updated HISTORY.md to include this API change of DB::OpenForReadOnly;
2. Updated the help information for the put and batchput subcommands of ldb with the option [--create_if_missing];
3. Updated the comment of Env::DeleteDir to emphasize that it returns OK only if the directory to be deleted is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6900
Test Plan: passed make check; also manually tested a few ldb subcommands
Reviewed By: pdillinger
Differential Revision: D21822188
Pulled By: gg814
fbshipit-source-id: 604cc0f0d0326a937ee25a32cdc2b512f9a3be6e
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
Added setting of zstd_max_train_bytes compression option parameter to c interop.
rocksdb_options_set_bottommost_compression_options was using bool parameter and thus not exported, updated it to unsigned char and added to c.h as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6796
Reviewed By: cheng-chang
Differential Revision: D21611471
Pulled By: ajkr
fbshipit-source-id: caaaf153de934837ad9af283c7f8c025ff0b0cf5
Summary:
People keep breaking the gcc 4.8 compilation due to different
warnings for shadowing member functions with locals. Adding to Travis
to keep compatibility. (gcc 4.8 is default on CentOS 7.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6915
Test Plan: local and Travis
Reviewed By: siying
Differential Revision: D21842894
Pulled By: pdillinger
fbshipit-source-id: bdcd4385127ee5d1cc222d87e53fb3695c32a9d4
Summary:
The patch cleans up the code and improves the consistency checks around
adding/deleting table files in `VersionBuilder`. Namely, it makes the checks
stricter and improves them in the following ways:
1) A table file can now only be deleted from the LSM tree using the level it
resides on. Earlier, there was some unnecessary wiggle room for
trivially moved files (they could be deleted using a lower level number than
the actual one).
2) A table file cannot be added to the tree if it is already present in the tree
on any level (not just the target level). The earlier code only had an assertion
(which is a no-op in release builds) that the newly added file is not already
present on the target level.
3) The above consistency checks around state transitions are now mandatory,
as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op
in release mode unless `force_consistency_checks` was set to `true`. The rationale
here is that assuming that the initial state is consistent, a valid transition leads to a
next state that is also consistent; however, an *invalid* transition offers no such
guarantee. Hence it makes sense to validate the transitions unconditionally,
and save `force_consistency_checks` for the paranoid checks that re-validate
the entire state.
4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862,
which enables us to efficiently look up the location (level and position within level)
of files in a `Version` by file number. This makes the consistency checks much more
efficient than the earlier `CheckConsistencyForDeletes`, which essentially
performed a linear search.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901
Test Plan:
Extended the unit tests and ran:
`make check`
`make whitebox_crash_test`
Reviewed By: ajkr
Differential Revision: D21822714
Pulled By: ltamasi
fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
Summary:
Because ARM and some other platforms have a larger cache line
size, they have a larger minimum filter size, which causes recently
added PartitionedMultiGet test in db_bloom_filter_test to fail on those
platforms. The code would actually end up using larger partitions,
because keys_per_partition_ would be 0 and never == number of keys
added.
The code now attempts to get as close as possible to the small target
size, while fully utilizing that filter size, if the target partition
size is smaller than the minimum filter size.
Also updated the test to break more uniformly across platforms
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6905
Test Plan: updated test, tested on ARM
Reviewed By: anand1976
Differential Revision: D21840639
Pulled By: pdillinger
fbshipit-source-id: 11684b6d35f43d2e98b85ddb2c8dcfd59d670817
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
Summary:
`IterKey::UpdateInternalKey()` is an error-prone API as it's
incompatible with `IterKey::TrimAppend()`, which is used for
decoding delta-encoded internal keys. This PR stops using it in
`BlockIter`. Instead, it assigns global seqno in a separate `IterKey`'s
buffer when needed. The logic for safely getting a Slice with global
seqno properly assigned is encapsulated in `GlobalSeqnoAppliedKey`.
`BinarySeek()` is also migrated to use this API (previously it ignored
global seqno entirely).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6843
Test Plan:
benchmark setup -- single file DBs, in-memory, no compression. "normal_db"
created by regular flush; "ingestion_db" created by ingesting a file. Both
DBs have same contents.
```
$ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000
$ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}')
$ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/
```
benchmark run command:
```
TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=10 -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=1048576000 -threads=1 -reads=40000000
```
results:
| DB | code | throughput |
|---|---|---|
| normal_db | master | 267.9 |
| normal_db | PR6843 | 254.2 (-5.1%) |
| ingestion_db | master | 259.6 |
| ingestion_db | PR6843 | 250.5 (-3.5%) |
Reviewed By: pdillinger
Differential Revision: D21562604
Pulled By: ajkr
fbshipit-source-id: 937596f836930515da8084d11755e1f247dcb264
Summary:
Preliminary user-timestamp support for delete.
If ["a", ts=100] exists, you can delete it by calling `DB::Delete(write_options, key)` in which `write_options.timestamp` points to a `ts` higher than 100.
Implementation
A new ValueType, i.e. `kTypeDeletionWithTimestamp` is added for deletion marker with timestamp.
The reason for a separate `kTypeDeletionWithTimestamp`: RocksDB may drop tombstones (keys with kTypeDeletion) when compacting them to the bottom level. This is OK and useful if timestamp is disabled. When timestamp is enabled, should we still reuse `kTypeDeletion`, we may drop the tombstone with a more recent timestamp, causing deleted keys to re-appear.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6253
Reviewed By: ltamasi
Differential Revision: D20995328
Pulled By: riversand963
fbshipit-source-id: a9e5c22968ad76f98e3dc6ee0151265a3f0df619
sdong