Tag:
Branch:
Tree:
baf37a0e81
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1472 Commits (baf37a0e818dc334a0ed94f3d315155e2c138c93)
Author | SHA1 | Message | Date |
---|---|---|---|
Changyu Bi | c53d604f41 |
`sst_dump --command=verify` should verify block checksums (#11576)
Summary: `sst_dump --command=verify` did not set read_options.verify_checksum to true so it was not verifying checksum. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11576 Test Plan: ran the same command on an SST file with bad checksum: ``` sst_dump --command=verify --file=...sst_file_with_bad_block_checksum Before this PR: options.env is 0x6ba048 Process ...sst_file_with_bad_block_checksum Sst file format: block-based The file is ok After this PR: options.env is 0x7f43f6690000 Process ...sst_file_with_bad_block_checksum Sst file format: block-based ... is corrupted: Corruption: block checksum mismatch: stored = 2170109798, computed = 2170097510, type = 4 ... ``` Reviewed By: ajkr Differential Revision: D47136284 Pulled By: cbi42 fbshipit-source-id: 07d68db715c00347145e5b83d649aef2c3f2acd9 |
1 year ago |
Yu Zhang | 15053f3ab4 |
Logically strip timestamp during flush (#11557)
Summary: Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes. While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced. ```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000``` Compiled with DEBUG_LEVEL=0 Test vs. control runs simulaneous for better accuracy, units = ops/sec PR vs base: Round 1: 350652 vs 349055 Round 2: 365733 vs 364308 Round 3: 355681 vs 354475 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557 Test Plan: New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`: `UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp `UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false. ``` make all check ./db_wal_test --gtest_filter="*WithTimestamp*" ./flush_job_test --gtest_filter="*WithTimestamp*" ./repair_test --gtest_filter="*WithTimestamp*" ./block_based_table_reader_test ``` Reviewed By: pdillinger Differential Revision: D47027664 Pulled By: jowlyzhang fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5 |
1 year ago |
akankshamahajan | fbd2f563bb |
Add an interface to provide support for underlying FS to pass their own buffer during reads (#11324)
Summary: 1. Public API change: Replace `use_async_io` API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation. 2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324 Test Plan: Tested locally Reviewed By: anand1976 Differential Revision: D44465322 Pulled By: akankshamahajan15 fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec |
1 year ago |
Yu Zhang | fb5748decf |
Fix crash_test crash (#11554)
Summary: `table_properties_` is not guaranteed to be available. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11554 Reviewed By: akankshamahajan15 Differential Revision: D46944170 Pulled By: jowlyzhang fbshipit-source-id: 609d598e75b417471c9cd964cc316453776a2135 |
1 year ago |
Yu Zhang | 7521478b43 |
Record the `persist_user_defined_timestamps` flag in manifest (#11515)
Summary: Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515 Test Plan: ``` make all check ./version_edit_test ``` Reviewed By: ltamasi Differential Revision: D46920386 Pulled By: jowlyzhang fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26 |
1 year ago |
Hui Xiao | 1da9ac2363 |
Add UT to test BG read qps behavior during upgrade for pr11406 (#11522)
Summary: **Context/Summary:** When db is upgrading to adopt [pr11406](https://github.com/facebook/rocksdb/pull/11406/), it's possible for RocksDB to infer a small tail size to prefetch for pre-upgrade files. Such small tail size would have caused 1 file read per index or filter partition if partitioned index or filer is used. This PR provides a UT to show this would not happen. Misc: refactor the related UTs a bit to make this new UT more readable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11522 Test Plan: - New UT If logic of upgrade is wrong e.g, ``` --- a/table/block_based/partitioned_index_reader.cc +++ b/table/block_based/partitioned_index_reader.cc @@ -166,7 +166,8 @@ Status PartitionIndexReader::CacheDependencies( uint64_t prefetch_len = last_off - prefetch_off; std::unique_ptr<FilePrefetchBuffer> prefetch_buffer; if (tail_prefetch_buffer == nullptr || !tail_prefetch_buffer->Enabled() || - tail_prefetch_buffer->GetPrefetchOffset() > prefetch_off) { + (false && tail_prefetch_buffer->GetPrefetchOffset() > prefetch_off)) { ``` , then the UT will fail like below ``` [ RUN ] PrefetchTailTest/PrefetchTailTest.UpgradeToTailSizeInManifest/0 file/prefetch_test.cc:461: Failure Expected: (db_open_file_read.count) < (num_index_partition), actual: 38 vs 33 Received signal 11 (Segmentation fault) ``` Reviewed By: pdillinger Differential Revision: D46546707 Pulled By: hx235 fbshipit-source-id: 9897b0a975e9055963edac5451fd1cd9d6c45d0e |
1 year ago |
Yu Zhang | 77dda0d9d8 |
Fix use after move in data block hash index (#11505)
Summary: Fix a use-after-move issue in block.cc and added some unit tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11505 Test Plan: ``` make all check ./block_test ``` Reviewed By: ltamasi Differential Revision: D46506188 Pulled By: jowlyzhang fbshipit-source-id: 316ed8ddd221c00b2bce2cf9fd47eea686cd74a5 |
1 year ago |
Hui Xiao | 3093d98c78 |
Fix higher read qps during db open caused by pr 11406 (#11516)
Summary: **Context:** [PR11406](https://github.com/facebook/rocksdb/pull/11406/) caused more frequent read during db open reading files with no `tail_size` in the manifest as part of the upgrade to 11406. This is due to that PR introduced - [smaller](https://github.com/facebook/rocksdb/pull/11406/files#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129fR833) prefetch tail buffer size compared to pre-11406 for small files (< 52 MB) when `tail_prefetch_stats` infers tail size to be 0 (usually happens when the stats does not have much historical data to infer early on) - more read (up to # of partitioned filter/index) when such small prefetch tail buffer does not contain all the partitioned filter/index needed in CacheDependencies() since the [fallback logic](https://github.com/facebook/rocksdb/pull/11406/files#diff-d98f1a83de24412ad7f3527725dae7e28851c7222622c3cdb832d3cdf24bbf9fR165-R179) that prefetches all partitions at once will be [skipped](url) when such a small prefetch tail buffer is passed in **Summary:** - Revert the fallback prefetch buffer size change to preserve existing behavior fully during upgrading in `BlockBasedTable::PrefetchTail()` - Use passed-in prefetch tail buffer in `CacheDependencies()` only if it has a smaller offset than the the offset of first partition filter/index, that is, at least as good as the existing prefetching behavior Pull Request resolved: https://github.com/facebook/rocksdb/pull/11516 Test Plan: - db bench Create db with small files prior to PR 11406 ``` ./db_bench -db=/tmp/testdb/ --partition_index_and_filters=1 --statistics=1 -benchmarks=fillseq -key_size=3200 -value_size=5 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=true -compression_type=zstd` ``` Read db to see if post-pr has lower read qps (i.e, rocksdb.file.read.db.open.micros count) during db open. ``` ./db_bench -use_direct_reads=1 --file_opening_threads=1 --threads=1 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 --db=/tmp/testdb/ --benchmarks=readrandom --key_size=3200 --value_size=5 --num=100 --disable_auto_compactions=true --compression_type=zstd ``` Pre-PR: ``` rocksdb.file.read.db.open.micros P50 : 3.399023 P95 : 5.924468 P99 : 12.408333 P100 : 29.000000 COUNT : 611 SUM : 2539 ``` Post-PR: ``` rocksdb.file.read.db.open.micros P50 : 593.736842 P95 : 861.605263 P99 : 1212.868421 P100 : 2663.000000 COUNT : 585 SUM : 345349 ``` _Note: To control the starting offset of the prefetch tail buffer easier, I manually override the following to eliminate the effect of alignment_ ``` class PosixRandomAccessFile : public FSRandomAccessFile { virtual size_t GetRequiredBufferAlignment() const override { - return logical_sector_size_; + return 1; } ``` - CI Reviewed By: pdillinger Differential Revision: D46472566 Pulled By: hx235 fbshipit-source-id: 2fe14ac8d489d15b0e08e6f8fe4f46d5f110978e |
1 year ago |
Yu Zhang | 9f7877f246 |
Add support to strip / pad timestamp when creating / reading a block based table (#11495)
Summary: Add support to strip timestamp in block based table builder and pad timestamp in block based table reader. On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family. On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps. This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495 Test Plan: Existing test `BlockBasedTableReaderTest` is parameterized to run with: 1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp 2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters 3) parallel vs non-parallel compression 4) enable/disable compression dictionary. Also added tests for API `BlockBasedTableReader::NewIterator`. `PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp. ``` make all check ./block_based_table_reader_test ./partitioned_filter_block_test ``` Reviewed By: ltamasi Differential Revision: D46344577 Pulled By: jowlyzhang fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675 |
1 year ago |
Yu Zhang | d1ae7f6c41 |
Add support to strip / pad timestamp when writing / reading a block (#11472)
Summary: This patch adds support in `BlockBuilder` to strip user-defined timestamp from the `key` added via `Add(key, value)` and its equivalent APIs. The stripping logic is different when the key is either a user key or an internal key, so the `BlockBuilder` is created with a flag to indicate that. This patch also add support on the read path to APIs `NewIndexIterator`, `NewDataIterator` to support pad a min timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11472 Test Plan: Three test modes are added to parameterize existing tests: UserDefinedTimestampTestMode::kNone -> UDT feature is not enabled UserDefinedTimestampTestMode::kNormal -> UDT feature enabled, write / read with min timestamp UserDefinedTimestampTestMode::kStripUserDefinedTimestamps -> UDT feature enabled, write / read with min timestamp, set `persist_user_defined_timestamps` where it applies to false. The tests read/write with min timestamp so that point read and range scan can correctly read values in all three test modes. `block_test` are parameterized to run with above three test modes and some additional parameteriazation ``` make all check ./block_test --gtest_filter="P/BlockTest*" ./block_test --gtest_filter="P/IndexBlockTest*" ``` Reviewed By: ltamasi Differential Revision: D46200539 Pulled By: jowlyzhang fbshipit-source-id: 59f5d6b584639976b69c2943eba723bd47d9b3c0 |
1 year ago |
Peter Dillinger | 39f5846ec7 |
Much better stats for seeks and prefix filtering (#11460)
Summary: We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers. This change does several things: * Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\* * Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access. * We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.) * For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in. * The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases. * The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix. * Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460 Test Plan: unit tests updated, including updating many to pop the stat value since last read to improve test readability and maintainability. Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED). Create DB with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 ``` And run simultaneous before&after with ``` TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics ``` Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec Reviewed By: ajkr Differential Revision: D46029177 Pulled By: pdillinger fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822 |
2 years ago |
Peter Dillinger | 206fdea3d9 |
Change internal headers with duplicate names (#11408)
Summary: In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement. No public API changes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408 Test Plan: existing tests Reviewed By: ltamasi Differential Revision: D45456696 Pulled By: pdillinger fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373 |
2 years ago |
Andrew Kryczka | 113f3250f1 |
Add block checksum mismatch ticker stat (#11438)
Summary: Added a ticker stat, `BLOCK_CHECKSUM_MISMATCH_COUNT`, to count how many block checksum verifications detected a mismatch. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11438 Test Plan: new unit test Reviewed By: pdillinger Differential Revision: D45788179 Pulled By: ajkr fbshipit-source-id: e2b44eba7c23b3e110ebe69eaa78a710dec2590f |
2 years ago |
Hui Xiao | 8f763bdeab |
Record and use the tail size to prefetch table tail (#11406)
Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064 |
2 years ago |
Changyu Bi | 62fc15f009 |
Block per key-value checksum (#11287)
Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940 |
2 years ago |
Peter Dillinger | a2c1f57358 |
Fix compression tests^2 (#11403)
Summary: This time a particular version of bzip2 is under-compressing vs. expectation in BlockBasedTableTest.CompressionRatioThreshold. We'll exempt that algorithm like I did for DBStatisticsTest.CompressionStatsTest. https://app.circleci.com/pipelines/github/facebook/rocksdb/26869/workflows/a46246db-73c7-4946-af82-10a78a7df6af/jobs/596124 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11403 Test Plan: CI Reviewed By: ltamasi Differential Revision: D45233441 Pulled By: pdillinger fbshipit-source-id: 506c8dfe5e0397c78193359df6288397bf0667c9 |
2 years ago |
Peter Dillinger | fb63d9b4ee |
Fix compression tests when snappy not available (#11396)
Summary: Tweak some bounds and things, and reduce risk of surprise results by running on all supported compressions (mostly). Also improves the precise compressibility of CompressibleString by using RandomBinaryString. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11396 Test Plan: updated tests Reviewed By: ltamasi Differential Revision: D45211938 Pulled By: pdillinger fbshipit-source-id: 9dc1dd8574a60a9364efe18558be66d31a35598b |
2 years ago |
Peter Dillinger | d79be3dca2 |
Changes and enhancements to compression stats, thresholds (#11388)
Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803 |
2 years ago |
Hui Xiao | 151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132 |
2 years ago |
Andrew Kryczka | 0a774a102f |
Clarify `SstFileWriter::DeleteRange()` ordering requirements (#11390)
Summary: As titled Pull Request resolved: https://github.com/facebook/rocksdb/pull/11390 Reviewed By: cbi42 Differential Revision: D45148830 Pulled By: ajkr fbshipit-source-id: 9a8dfd040514bae3d8ed9e97a79cae7683f2749a |
2 years ago |
Peter Dillinger | 9b698cda51 |
Update GeneralTableTest::ApproximateOffsetOfCompressed values (#11384)
Summary: Because of this failure with snappy 1.1.8, ROCKSDB_NO_FBCODE=1 ``` Value 3531 is not in range [2000, 3525] table/table_test.cc:4231: Failure ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11384 Test Plan: run updated test in failing configuration Reviewed By: ajkr Differential Revision: D45057161 Pulled By: pdillinger fbshipit-source-id: 397054f08033315e2e2bd9410f1fa32ddbf3b9c8 |
2 years ago |
Murali Vilayannur | 226ee25d30 |
Block fetch CPU time counters in perf context (#11342)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11342 Reviewed By: ajkr Differential Revision: D45026838 Pulled By: mnv104 fbshipit-source-id: 099ed9579922b8fa6e7d3332bbb829d50ec47d91 |
2 years ago |
Peter Dillinger | f9db0c6e9c |
Refactor block cache tracing w/improved MultiGet (#11339)
Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d |
2 years ago |
Changyu Bi | f631138e1c |
Better support for merge operation with data block hash index (#11356)
Summary: when data block hash index finds a key of op_type `kTypeMerge`, do not redo data block seek. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11356 Test Plan: - added new unit test - crash test: `python3 tools/db_crashtest.py whitebox --simple --use_merge=1 --data_block_index_type=1` - benchmark see slight improvement in read throughput: ``` TEST_TMPDIR=/dev/shm/hashindex ./db_bench -benchmarks=mergerandom -use_existing_db=false -num=10000000 -compression_type=none -level_compaction_dynamic_level_bytes=1 -merge_operator=PutOperator -write_buffer_size=1000000 --use_data_block_hash_index=1 TEST_TMPDIR=/dev/shm/hashindex ./db_bench -benchmarks=readrandom[-X10] -use_existing_db=true -num=10000000 -merge_operator=PutOperator -readonly=1 -disable_auto_compactions=1 -reads=100000 Main: readrandom [AVG 10 runs] : 29526 (± 1118) ops/sec; 2.1 (± 0.1) MB/sec Post-PR: readrandom [AVG 10 runs] : 31095 (± 662) ops/sec; 2.2 (± 0.0) MB/sec ``` Reviewed By: pdillinger Differential Revision: D44759895 Pulled By: cbi42 fbshipit-source-id: 387f0c35938c7e0e96b810ca3babf1967fc68191 |
2 years ago |
Wentian Guo | 0578d9f951 |
Filter table files by timestamp: Get operator (#11332)
Summary: If RocksDB enables user-defined timestamp, then RocksDB read path can filter table files by the min/max timestamps of each file. If application wants to lookup a key that is the most recent and visible to a certain timestamp ts, then we can compare ts with the min_ts of each file. If ts < min_ts, then we know all keys in the file is not visible at time ts, then we do not have to open the file. This can also save an IO. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11332 Reviewed By: pdillinger Differential Revision: D44763497 Pulled By: guowentian fbshipit-source-id: abde346b9f18480fe03c04e4006e7d62aa9c22a8 |
2 years ago |
Andrew Kryczka | b45738622a |
Use user-provided ReadOptions for metadata block reads more often (#11208)
Summary: This is mostly taken from https://github.com/facebook/rocksdb/issues/10427 with my own comments addressed. This PR plumbs the user’s `ReadOptions` down to `GetOrReadIndexBlock()`, `GetOrReadFilterBlock()`, and `GetFilterPartitionBlock()`. Now those functions no longer have to make up a `ReadOptions` with incomplete information. I also let `PartitionIndexReader::NewIterator()` pass through its caller's `ReadOptions::verify_checksums`, which was inexplicably dropped previously. Fixes https://github.com/facebook/rocksdb/issues/10463 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11208 Test Plan: Functional: - Measured `-verify_checksum=false` applies to metadata blocks read outside of table open - setup command: `TEST_TMPDIR=/tmp/100M-DB/ ./db_bench -benchmarks=filluniquerandom,waitforcompaction -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -compression_type=none -num=1638400 -key_size=8 -value_size=56` - run command: `TEST_TMPDIR=/tmp/100M-DB/ ./db_bench -benchmarks=readrandom -use_existing_db=true -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -compression_type=none -num=1638400 -key_size=8 -value_size=56 -duration=10 -threads=32 -cache_size=131072 -statistics=true -verify_checksum=false -open_files=20 -cache_index_and_filter_blocks=true` - before: `rocksdb.block.checksum.compute.count COUNT : 384353` - after: `rocksdb.block.checksum.compute.count COUNT : 22` Performance: - Setup command (tmpfs, 128MB logical data size, cache indexes/filters without pinning so index/filter lookups go through table reader): `TEST_TMPDIR=/dev/shm/128M-DB/ ./db_bench -benchmarks=filluniquerandom,waitforcompaction -write_buffer_size=131072 -target_file_size_base=131072 -max_bytes_for_level_base=524288 -compression_type=none -num=4194304 -key_size=8 -value_size=24 -bloom_bits=8 -whole_key_filtering=1` - Measured point lookup performance. Database is fully cached to emphasize any new callstack overheads - Command: `TEST_TMPDIR=/dev/shm/128M-DB/ ./db_bench -benchmarks=readrandom[-W1][-X20] -use_existing_db=true -cache_index_and_filter_blocks=true -disable_auto_compactions=true -num=4194304 -key_size=8 -value_size=24 -bloom_bits=8 -whole_key_filtering=1 -duration=10 -cache_size=1048576000` - Before: `readrandom [AVG 20 runs] : 274848 (± 3717) ops/sec; 8.4 (± 0.1) MB/sec` - After: `readrandom [AVG 20 runs] : 277904 (± 4474) ops/sec; 8.5 (± 0.1) MB/sec` Reviewed By: hx235 Differential Revision: D43145366 Pulled By: ajkr fbshipit-source-id: 75ec062ece86a82cd788783de9de2c72df57f994 |
2 years ago |
Peter Dillinger | 3c17930ede |
Change default block cache from 8MB to 32MB (#11350)
Summary:
... which increases default number of shards from 16 to 64. Although the default block cache size is only recommended for applications where RocksDB is not performance-critical, under stress conditions, block cache mutex contention could become a performance bottleneck. This change of default should alleviate that.
Note that reducing the size of cache shards (recommended minimum 512MB) could cause thrashing, e.g. on filter blocks, so capacity needs to increase to safely increase number of shards.
The 8MB default dates back to 2011 or earlier (
|
2 years ago |
Andrew Kryczka | 9f8cdc8ad6 |
validate SstFileWriter range tombstones cover positive ranges (#11322)
Summary: As titled. This is the same as https://github.com/facebook/rocksdb/issues/6788 but for range tombstones written through `SstFileWriter` rather than through `DB`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11322 Reviewed By: cbi42 Differential Revision: D44317733 Pulled By: ajkr fbshipit-source-id: f6eb8791ae2c09c169b6bfe0d047449d924b377e |
2 years ago |
Peter Dillinger | 204fcff751 |
HyperClockCache support for SecondaryCache, with refactoring (#11301)
Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5 |
2 years ago |
Peter Dillinger | ccaa3225b0 |
Simplify tracking entries already in SecondaryCache (#11299)
Summary: In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic. This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code. gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper. Also refactored some related test code to share common code / functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299 Test Plan: existing tests Reviewed By: anand1976 Differential Revision: D44101453 Pulled By: pdillinger fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345 |
2 years ago |
Hui Xiao | bab5f9a6f2 |
Add new stat rocksdb.table.open.prefetch.tail.read.bytes, rocksdb.table.open.prefetch.tail.{miss|hit} (#11265)
Summary: **Context/Summary:** We are adding new stats to measure behavior of prefetched tail size and look up into this buffer The stat collection is done in FilePrefetchBuffer but only for prefetched tail buffer during table open for now using FilePrefetchBuffer enum. It's cleaner than the alternative of implementing in upper-level call places of FilePrefetchBuffer for table open. It also has the benefit of extensible to other types of FilePrefetchBuffer if needed. See db bench for perf regression concern. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11265 Test Plan: **- Piggyback on existing test** **- rocksdb.table.open.prefetch.tail.miss is harder to UT so I manually set prefetch tail read bytes to be small and run db bench.** ``` ./db_bench -db=/tmp/testdb -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 -use_direct_reads=true ``` ``` rocksdb.table.open.prefetch.tail.read.bytes P50 : 4096.000000 P95 : 4096.000000 P99 : 4096.000000 P100 : 4096.000000 COUNT : 225 SUM : 921600 rocksdb.table.open.prefetch.tail.miss COUNT : 91 rocksdb.table.open.prefetch.tail.hit COUNT : 1034 ``` **- No perf regression observed in db_bench** SETUP command: create same db with ~900 files for pre-change/post-change. ``` ./db_bench -db=/tmp/testdb -benchmarks="fillseq" -key_size=32 -value_size=512 -num=500000 -write_buffer_size=655360 -disable_auto_compactions=true -target_file_size_base=16777216 -compression_type=none ``` TEST command 60 runs or til convergence: as suggested by anand1976 and akankshamahajan15, vary `seek_nexts` and `async_io` in testing. ``` ./db_bench -use_existing_db=true -db=/tmp/testdb -statistics=false -cache_size=0 -cache_index_and_filter_blocks=false -benchmarks=seekrandom[-X60] -num=50000 -seek_nexts={10, 500, 1000} -async_io={0|1} -use_direct_reads=true ``` async io = 0, direct io read = true | seek_nexts = 10, 30 runs | seek_nexts = 500, 12 runs | seek_nexts = 1000, 6 runs -- | -- | -- | -- pre-post change | 4776 (± 28) ops/sec; 24.8 (± 0.1) MB/sec | 288 (± 1) ops/sec; 74.8 (± 0.4) MB/sec | 145 (± 4) ops/sec; 75.6 (± 2.2) MB/sec post-change | 4790 (± 32) ops/sec; 24.9 (± 0.2) MB/sec | 288 (± 3) ops/sec; 74.7 (± 0.8) MB/sec | 143 (± 3) ops/sec; 74.5 (± 1.6) MB/sec async io = 1, direct io read = true | seek_nexts = 10, 54 runs | seek_nexts = 500, 6 runs | seek_nexts = 1000, 4 runs -- | -- | -- | -- pre-post change | 3350 (± 36) ops/sec; 17.4 (± 0.2) MB/sec | 264 (± 0) ops/sec; 68.7 (± 0.2) MB/sec | 138 (± 1) ops/sec; 71.8 (± 1.0) MB/sec post-change | 3358 (± 27) ops/sec; 17.4 (± 0.1) MB/sec | 263 (± 2) ops/sec; 68.3 (± 0.8) MB/sec | 139 (± 1) ops/sec; 72.6 (± 0.6) MB/sec Reviewed By: ajkr Differential Revision: D43781467 Pulled By: hx235 fbshipit-source-id: a706a18472a8edb2b952bac3af40eec803537f2a |
2 years ago |
Levi Tamasi | 49881921cd |
Rename a recently added PerfContext counter (#11294)
Summary: The patch renames the counter added in https://github.com/facebook/rocksdb/issues/11284 for better consistency with the existing naming scheme. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11294 Test Plan: `make check` Reviewed By: jowlyzhang Differential Revision: D44035964 Pulled By: ltamasi fbshipit-source-id: 8b1a2a03ee728148365367e0ecc1fcf462f62191 |
2 years ago |
Levi Tamasi | 1d52438504 |
Add a PerfContext counter for merge operands applied in point lookups (#11284)
Summary: The existing PerfContext counter `internal_merge_count` only tracks the Merge operands applied during range scans. The patch adds a new counter called `internal_merge_count_point_lookups` to track the same metric for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and also fixes a couple of cases in the iterator where the existing counter wasn't updated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284 Test Plan: `make check` Reviewed By: jowlyzhang Differential Revision: D43926082 Pulled By: ltamasi fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9 |
2 years ago |
Peter Dillinger | e01073252b |
Tests verifying non-zero checksums of zero bytes (#11260)
Summary: Adds unit tests verifying that a block payload and checksum of all zeros is not falsely considered valid data. The test exhaustively checks that for blocks up to some length (default 20K, more exhaustively 10M) of all zeros do not produce a block checksum of all zeros. Also small refactoring of an existing checksum test to use parameterized test. (Suggest hiding whitespace changes for review.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11260 Test Plan: this is the test, manual run with `ROCKSDB_THOROUGH_CHECKSUM_TEST=1` to verify up to 10M. Reviewed By: hx235 Differential Revision: D43706192 Pulled By: pdillinger fbshipit-source-id: 95e721c320ca928e7fa2400c2570fb359cc30b1f |
2 years ago |
Changyu Bi | d053926fa2 |
Improve documentation for MergingIterator (#11161)
Summary: Add some comments to try to explain how/why MergingIterator works. Made some small refactoring, mostly in MergingIterator::SkipNextDeleted() and MergingIterator::SeekImpl(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11161 Test Plan: crash test with small key range: ``` python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=6000 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10 ``` Reviewed By: ajkr Differential Revision: D42860994 Pulled By: cbi42 fbshipit-source-id: 3f0c1c9c6481a7f468bf79d823998907a8116e9e |
2 years ago |
Levi Tamasi | 3c9eed688e |
Enable moving a string or PinnableSlice into PinnableWideColumns (#11248)
Summary: This makes it possible to eliminate some copies in `GetEntity` / `MultiGetEntity`, in particular when `Merge`s or blobs are involved. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11248 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D43544215 Pulled By: ltamasi fbshipit-source-id: bc4c8955a24bbd8bc4ab098e72133ead757f9707 |
2 years ago |
Changyu Bi | 229297d1b8 |
Refactor AddRangeDels() + consider range tombstone during compaction file cutting (#11113)
Summary: A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)). The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113 Test Plan: * added unit test in db_range_del_test * crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10` Reviewed By: ajkr Differential Revision: D42655709 Pulled By: cbi42 fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c |
2 years ago |
mrambacher | b6640c3117 |
Remove FactoryFunc from LoadXXXObject (#11203)
Summary: The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required. Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203 Reviewed By: cbi42 Differential Revision: D43160255 Pulled By: pdillinger fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c |
2 years ago |
Andrew Kryczka | 25e1365227 |
Merge operator failed subcode (#11231)
Summary: From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions. This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231 Test Plan: updated unit test Reviewed By: akankshamahajan15 Differential Revision: D43396607 Pulled By: ajkr fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9 |
2 years ago |
Andrew Kryczka | 6aef1a05d6 |
Use CacheDependencies() at start of ApproximateKeyAnchors() (#11230)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11230 Test Plan: - setup command: `$ ./db_bench -benchmarks=fillrandom,compact -compression_type=none -num=1000000 -write_buffer_size=4194304 -target_file_size_base=4194304 -use_direct_io_for_flush_and_compaction=true -partition_index_and_filters=true -bloom_bits=10 -metadata_block_size=1024` - measure small read count bucketed by size: `$ strace -fye pread64 ./db_bench.ctrl -use_existing_db=true -benchmarks=compact -compaction_readahead_size=4194304 -compression_type=none -num=1000000 -write_buffer_size=4194304 -target_file_size_base=4194304 -use_direct_io_for_flush_and_compaction=true -partition_index_and_filters=true -bloom_bits=10 -metadata_block_size=1024 -subcompactions=4 -cache_size=1048576000 2>&1 >/dev/null | awk '/= [0-9]+$/{print "[", int($NF / 1024), "KB,", int(1 + $NF / 1024), "KB)"}' | sort -n -k 2 | uniq -c | head -3` - before: ``` 1119 [ 0 KB, 1 KB) 1 [ 6 KB, 7 KB) 2 [ 7 KB, 8 KB) ``` - after: ``` 242 [ 0 KB, 1 KB) 1 [ 6 KB, 7 KB) 2 [ 7 KB, 8 KB) ``` Reviewed By: pdillinger Differential Revision: D43388507 Pulled By: ajkr fbshipit-source-id: a02413c9f615b00784700646825a9870ee10f3a7 |
2 years ago |
Levi Tamasi | 9794acb597 |
Add a new MultiGetEntity API (#11222)
Summary: The new `MultiGetEntity` API can be used to get a consistent view of a batch of keys, with the results presented as wide-column entities. Similarly to `GetEntity` and the iterator's `columns` API, if the entry corresponding to the key is a wide-column entity to start with, it is returned as-is, and if it is a plain key-value, it is wrapped into an entity with a single default column. Implementation-wise, the new API shares the logic of the batched `MultiGet` API (via the `MultiGetCommon` methods). Both single-CF and multi-CF `MultiGetEntity` APIs are provided, and blobs are also supported. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D43256950 Pulled By: ltamasi fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005 |
2 years ago |
Wentian Guo | 42d6652ba2 |
remove dependency on options.h for port_posix.h andport_win.h (#11214)
Summary: The files in `port/`, such as `port_posix.h`, are layering over the system libraries, so shouldn't include the DB-specific files like `options.h`. This PR remove this dependency. # How The reason that `port_posix.h` (or `port_win.h`) include `options.h` is to use `CpuPriority`, as there is a method `SetCpuPriority()` in `port_posix.h` that uses `CpuPriority.` - I think `SetCpuPriority()` make sense to exist in `port_posix.h` as it provides has platform-dependent implementation - `CpuPriority` enum is defined in `env.h`, but used in `rocksdb/include` and `port/`. Hence, let us define `CpuPriority` enum in a common file, say `port_defs.h`, such that both directories `rocksdb/include` and `port/` can include. When we remove this dependency, some other files have compile errors because they can't find definitions, so add header files to resolve # Test make all check -j Pull Request resolved: https://github.com/facebook/rocksdb/pull/11214 Reviewed By: pdillinger Differential Revision: D43196910 Pulled By: guowentian fbshipit-source-id: 70deccb72844cfb08fcc994f76c6ef6df5d55ab9 |
2 years ago |
Peter Dillinger | 3cacd4b4ec |
Put Cache and CacheWrapper in new public header (#11192)
Summary: The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment. In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544 Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it. Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192 Test Plan: `make check` Reviewed By: anand1976 Differential Revision: D43055487 Pulled By: pdillinger fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110 |
2 years ago |
Hui Xiao | 6650ca244e |
Remove a couple deprecated convenience.h APIs (#11120)
Summary: **Context/Summary:** As instructed by convenience.h comments, a few deprecated APIs are removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120 Test Plan: - make check & CI - eyeball check on test semantics. Reviewed By: pdillinger Differential Revision: D42937507 Pulled By: hx235 fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1 |
2 years ago |
Yu Zhang | 24ac53d81a |
Use user key on sst file for blob verification for Get and MultiGet (#11105)
Summary: Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller. Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105 Test Plan: make V=1 db_blob_basic_test ./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*" Reviewed By: ltamasi Differential Revision: D42716487 Pulled By: jowlyzhang fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a |
2 years ago |
sdong | 4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
2 years ago |
Karim TAAM | a1e92bd956 |
use verify checksum option in block based table reader Open() (#11099)
Summary: ## Description In this issue https://github.com/facebook/rocksdb/issues/11002 we found that when we use rocksdb with the `verify checksum` read_option to false the verification is done anyway By analyzing the code along the stacktrace I saw that at the level of https://github.com/facebook/rocksdb/compare/main...matkt:feature/use-verify-checksum-in-block-based-table-reader?expand=1#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129f we are not keeping all the options and we forget the `verify_checksum` the comment in this class suggests that it should be managed https://github.com/facebook/rocksdb/compare/main...matkt:feature/use-verify-checksum-in-block-based-table-reader?expand=1#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129fL581 <img width="1724" alt="204511641-86ab4b9b-45e5-4a2b-a13d-81fa26435d38" src="https://user-images.githubusercontent.com/26581503/213152802-c46bc1c7-a3a2-4a6f-9bb1-bf92ee93af7a.png"> this PR just adds the line to manage the `verify checksum` ## Tests - Running unit tests - Test without setting `verify checksum` and verifying that we are calling the checksum code - Test by setting `verify checksum` to true and verifying that we are calling the checksum code - Test by setting `verify checksum` to false and verifying that we are **not** calling the checksum code Pull Request resolved: https://github.com/facebook/rocksdb/pull/11099 Reviewed By: cbi42 Differential Revision: D42679881 Pulled By: ajkr fbshipit-source-id: c7dd10768282fd0699f7e1bf397ceb7adbea4ab6 |
2 years ago |
Heiko Becker | 88edfbfb5e |
Fix build with gcc 13 by including <cstdint> (#11118)
Summary: Like other versions before, gcc 13 moved some includes around and as a result <cstdint> is no longer transitively included [1]. Explicitly include it for uint{32,64}_t. [1] https://gcc.gnu.org/gcc-13/porting_to.html#header-dep-changes Pull Request resolved: https://github.com/facebook/rocksdb/pull/11118 Reviewed By: cbi42 Differential Revision: D42711356 Pulled By: ajkr fbshipit-source-id: 5ea257b85b7017f40fd8fdbce965336da95c55b2 |
2 years ago |
sdong | 2800aa069a |
Remove compressed block cache (#11117)
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d |
2 years ago |
Andrew Kryczka | b7fbcefda8 |
Add API to limit blast radius of merge operator failure (#11092)
Summary: Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage. To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092 Reviewed By: siying Differential Revision: D42525673 Pulled By: ajkr fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee |
2 years ago |