Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place.
If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully.
This option is enabled in crash test in half of the time.
Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235
Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory.
Reviewed By: anand1976
Differential Revision: D28010944
fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Since the Ribbon filter schema seems good (compatible back to
6.15.0), this change commits to long term support of the SST schema,
even though we expect the API for enabling Ribbon to change (still
called NewExperimentalRibbonFilterPolicy).
This also adds support for "hybrid" configuration in which some levels
use Bloom (higher levels, lower numbered) for speed and the rest use
Ribbon (lower levels, higher numbered) for memory space efficiency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198
Test Plan: unit test added, crash test support
Reviewed By: jay-zhuang
Differential Revision: D27831232
Pulled By: pdillinger
fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab
Summary:
Enable backup/restore functionality with Integrated BlobDB in
db_stress and crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8165
Test Plan:
Ran python3 -u tools/db_crashtest.py --simple whitebox along
with :
1. decreased "backup_in_one" value for backups to be more frequent and
2. manually changed code for "enable_blob_file" to be always true and
apply blobdb params 100% for testing purpose.
Reviewed By: ltamasi
Differential Revision: D27636025
Pulled By: akankshamahajan15
fbshipit-source-id: 0d0e0d1479ced163f992872dc998e79c581bfc99
Summary:
According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last
key in the previous partition" so that SeekForPrev() in prefix mode can return correct result.
The prefix of the last key in the previous partition does not necessarily have the same prefix
as the first key in the current partition. Regardless of the first key in current partition, the
prefix of the last key in the previous partition should be added. The existing code, however,
does not follow this. Furthermore, there is another issue: when finishing current filter partition,
`FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively
overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds
to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding
the bloom of the prefix of the last key of the previous partition.
Prefix extractor is FixedLength.2.
```
[ filter part 1 ] [ filter part 2 ]
abc d
```
When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc"
but smaller than "d".
If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build
incorrect iterator tree in non-total-order mode.
Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion
error when checking on an arbitrary key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137
Test Plan:
```
make check
```
Without this fix, the following command will fail pretty soon.
```
./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \
--avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \
--batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \
--bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \
--checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \
--compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \
--compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \
--compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \
--continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \
--db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \
--enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \
--format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \
--get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \
--iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \
--log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \
--max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \
--max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \
--max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \
--nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \
--periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \
--readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \
--snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \
--sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \
--target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \
--top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \
--use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \
--use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \
--verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \
--write_dbid_to_manifest=1 --writepercent=35
```
Reviewed By: pdillinger
Differential Revision: D27553054
Pulled By: riversand963
fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98
Summary:
Currently, partitioned filter does not support user-defined timestamp. Disable it for now in ts stress test so that
the contrun jobs can proceed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8127
Test Plan: make crash_test_with_ts
Reviewed By: ajkr
Differential Revision: D27388488
Pulled By: riversand963
fbshipit-source-id: 5ccff18121cb537bd82f2ac072cd25efb625c666
Summary:
Fix the following error while running `make crash_test`
```
Traceback (most recent call last):
File "tools/db_crashtest.py", line 705, in <module>
main()
File "tools/db_crashtest.py", line 696, in main
blackbox_crash_main(args, unknown_args)
File "tools/db_crashtest.py", line 479, in blackbox_crash_main
+ list({'db': dbname}.items())), unknown_args)
File "tools/db_crashtest.py", line 414, in gen_cmd
finalzied_params = finalize_and_sanitize(params)
File "tools/db_crashtest.py", line 331, in finalize_and_sanitize
dest_params.get("user_timestamp_size") > 0):
TypeError: '>' not supported between instances of 'NoneType' and 'int'
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8091
Test Plan: make crash_test
Reviewed By: ltamasi
Differential Revision: D27268276
Pulled By: riversand963
fbshipit-source-id: ed2873b9587ecc51e24abc35ef2bd3d91fb1ed1b
Summary:
Add some basic test for user-defined timestamp to db_stress. Currently,
read with timestamp always tries to read using the current timestamp.
Due to the per-key timestamp-sequence ordering constraint, we only add timestamp-
related tests to the `NonBatchedOpsStressTest` since this test serializes accesses
to the same key and uses a file to cross-check data correctness.
The timestamp feature is not supported in a number of components, e.g. Merge, SingleDelete,
DeleteRange, CompactionFilter, Readonly instance, secondary instance, SST file ingestion, transaction,
etc. Therefore, db_stress should exit if user enables both timestamp and these features at the same
time. The (currently) incompatible features can be found in
`CheckAndSetOptionsForUserTimestamp`.
This PR also fixes a bug triggered when timestamp is enabled together with
`index_type=kBinarySearchWithFirstKey`. This bug fix will also be in another separate PR
with more unit tests coverage. Fixing it here because I do not want to exclude the index type
from crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8061
Test Plan: make crash_test_with_ts
Reviewed By: jay-zhuang
Differential Revision: D27056282
Pulled By: riversand963
fbshipit-source-id: c3e00ad1023fdb9ebbdf9601ec18270c5e2925a9
Summary:
Since our stress/crash tests by default generate values of size 8, 16, or 24,
it does not make much sense to set `min_blob_size` to 256. The patch
updates the set of potential `min_blob_size` values in the crash test
script and in `db_stress` where it might be set dynamically using
`SetOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8085
Test Plan: Ran `make check` and tried the crash test script.
Reviewed By: riversand963
Differential Revision: D27238620
Pulled By: ltamasi
fbshipit-source-id: 4a96f9944b1ed9220d3045c5ab0b34c49009aeee
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
The patch adds checkpoint support to BlobDB. Blob files are hard linked or
copied, depending on whether the checkpoint directory is on the same filesystem
or not, similarly to table files.
TODO: Add support for blob files to `ExportColumnFamily` and to the checksum
verification logic used by backup/restore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7959
Test Plan: Ran `make check` and the crash test for a while.
Reviewed By: riversand963
Differential Revision: D26434768
Pulled By: ltamasi
fbshipit-source-id: 994be55a8dc08133028250760fca440d2c7c4dc5
Summary:
The patch adds support for the options related to the new BlobDB implementation
to `db_stress`, including support for dynamically adjusting them using `SetOptions`
when `set_options_one_in` and a new flag `allow_setting_blob_options_dynamically`
are specified. (The latter is used to prevent the options from being enabled when
incompatible features are in use.)
The patch also updates the `db_stress` help messages of the existing stacked BlobDB
related options to clarify that they pertain to the old implementation. In addition, it
adds the new BlobDB to the crash test script. In order to prevent a combinatorial explosion
of jobs and still perform whitebox/blackbox testing (including under ASAN/TSAN/UBSAN),
and to also test BlobDB in conjunction with atomic flush and transactions, the script sets
the BlobDB options in 10% of normal/`cf_consistency`/`txn` crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7900
Test Plan: Ran `make check` and `db_stress`/`db_crashtest.py` with various options.
Reviewed By: jay-zhuang
Differential Revision: D26094913
Pulled By: ltamasi
fbshipit-source-id: c2ef3391a05e43a9687f24e297df05f4a5584814
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).
The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.
When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748
Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.
Reviewed By: pdillinger
Differential Revision: D25754492
Pulled By: ajkr
fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
Summary:
Inject the random write error to stress test, it requires set reopen=0 and disable_wal=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7653
Test Plan: pass db_stress and python3 db_crashtest.py blackbox
Reviewed By: ajkr
Differential Revision: D25354132
Pulled By: zhichao-cao
fbshipit-source-id: 44721104eecb416e27f65f854912c40e301dd669
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)
Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.
### Benchmarking
```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 18.7508
Random filter net ns/op: 258.246
Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 58.4523
Random filter net ns/op: 363.717
Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```
168.166 / 238.488 = 0.705 -> 29.5% space reduction
130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)
### Working around a hashing "flaw"
bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate. The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant. Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))
As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)
TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.
### Other related changes
* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658
Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.
Reviewed By: jay-zhuang
Differential Revision: D24899349
Pulled By: pdillinger
fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
Summary:
crash tests donot run in DEBUG_MODE=0 on tmpfs when
use_direct_reads/use_direct_io_for_flush_and_compaction is set randomly because
direct I/O is not supported on tmpfs and tests exit.
Fix: Sanitize direct I/O read options in DEBUG_LEVEL=0 so that crash
tests can run in tmpfs. When mmap_reads is set, direct I/O reads options are
unset so we can sanitize direct I/O reads options in case of tmpfs as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7643
Test Plan:
1. export DEBUG_LEVEL=0; export TEST_TMPDIR="/dev/shm";
export CRASH_TEST_EXT_ARGS="--use_direct_reads=1 --mmap_read=0";
make crash_test -j64
2. In DEBUG_LEVEL=1 mode: make crash_test -j64
Reviewed By: jay-zhuang
Differential Revision: D24766550
Pulled By: akankshamahajan15
fbshipit-source-id: 021720b2343c12c72004f84b26147625d3991d9e
Summary:
If crash test fails, don't delete the `expected_values_file` for later
debug. More details: https://github.com/facebook/rocksdb/issues/7530
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7534
Test Plan: local host
Reviewed By: ajkr
Differential Revision: D24239655
Pulled By: jay-zhuang
fbshipit-source-id: 3566f91a30aae1e27d2f51d910cddd08edb7d4cf
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
Cover paranoid_file_checks in crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7489
Test Plan: Run crash tests for hours and didn't see any failure.
Reviewed By: ajkr
Differential Revision: D24063868
fbshipit-source-id: 7b48b110e66ce78ae5d0c99a9f32af86edd34c1e
Summary:
It's important to make sure no false positive is reported when options.paranoid_file_checks is used. Add it to stress test and a place holder in crash test. It is disabled in crash test as there appears to be a bug causing false positive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7473
Test Plan: Run crash test
Reviewed By: ajkr
Differential Revision: D24026939
fbshipit-source-id: 89102acb45cf041776775ce44a4eef4b0f3a380c
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
This change has the crash test randomly select from a few file
checksum implementations, or nullptr, for DB file_checksum_gen_factory.
For compatibility across runs on same DB, each non-null factory can
understand all the other functions, but the default changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7343
Test Plan:
'make blackbox_crash_test' for a while, including with some
debug output to ensure code is being exercised.
Reviewed By: zhichao-cao
Differential Revision: D23494580
Pulled By: pdillinger
fbshipit-source-id: 73bbc7ca32c1adaf619134c0c830f12894880b8a
Summary:
Although added to db_stress, testing of backup/restore
was never integrated into the crash test, originally concerned about
performance. I've enabled it now and to address the peformance concern,
testing backup/restore is always skipped once the db exceeds a certain
size threshold, default 100MB. This should provide sufficient
opportunity for testing BackupEngine without bogging down everything
else with heavier and heavier operations.
Also fixed backup/restore in db_stress by making sure PurgeOldBackups
can remove manifest files, which are normally kept around for db_stress.
Added more coverage of backup options, and up to three backups being
saved in one backup directory (in some cases).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7348
Test Plan:
ran 'make blackbox_crash_test' for a while, with heightened
probabilitly of taking backups (1/10k). Also confirmed with some debug
output that the code is being covered, TestBackupRestore only takes
a few seconds to complete when triggered, and even at 1/10k and ~50MB
database, there's <,~ 1 thread testing backups at any time.
Reviewed By: ajkr
Differential Revision: D23510835
Pulled By: pdillinger
fbshipit-source-id: b6b8735591808141f81f10773ac31634cf03b6c0
Summary:
The mechanism to mark files for compaction is most commonly used in
delete-triggered compaction. This PR adds an option to exercise the
marking mechanism on random files created by db_stress. This PR also
enables that option in db_crashtest.py on its db_stress runs at random.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7231
Test Plan:
- ran some minified crash tests; verified they succeed and we see `"compaction_reason": "FilesMarkedForCompaction"` regularly in the logs.
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --duration=600 --interval=30 --max_key=10000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py whitebox --duration=600 --interval=30 --max_key=1000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33 --random_kill_odd=8887
```
Reviewed By: anand1976
Differential Revision: D23025156
Pulled By: ajkr
fbshipit-source-id: a404c467ebc12afa94dae35956ea9b372f592a96
Summary:
SstFileManager is already supported in the stress test as of https://github.com/facebook/rocksdb/issues/6454. This
PR enables the SstFileManager in some of the crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6993
Reviewed By: riversand963
Differential Revision: D22084406
Pulled By: ajkr
fbshipit-source-id: 78b8642682e7570ff6ec3a1c3ccd9940f4362289
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.
Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)
Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.
With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).
Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.
Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.
Results from filter_bench with jemalloc (irrelevant details omitted):
(normal keys/filter, but high variance)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.6278
Number of filters: 5516
Total size (MB): 200.046
Reported total allocated memory (MB): 220.597
Reported internal fragmentation: 10.2732%
Bits/key stored: 10.0097
Average FP rate %: 0.965228
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.5104
Number of filters: 5464
Total size (MB): 200.015
Reported total allocated memory (MB): 200.322
Reported internal fragmentation: 0.153709%
Bits/key stored: 10.1011
Average FP rate %: 0.966313
(very few keys / filter, optimization not as effective due to ~59 byte
internal fragmentation in blocked Bloom filter representation)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.5649
Number of filters: 162950
Total size (MB): 200.001
Reported total allocated memory (MB): 224.624
Reported internal fragmentation: 12.3117%
Bits/key stored: 10.2951
Average FP rate %: 0.821534
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 31.8057
Number of filters: 159849
Total size (MB): 200
Reported total allocated memory (MB): 208.846
Reported internal fragmentation: 4.42297%
Bits/key stored: 10.4948
Average FP rate %: 0.811006
(high keys/filter)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.7017
Number of filters: 164
Total size (MB): 200.352
Reported total allocated memory (MB): 221.5
Reported internal fragmentation: 10.5552%
Bits/key stored: 10.0003
Average FP rate %: 0.969358
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.7131
Number of filters: 160
Total size (MB): 200.928
Reported total allocated memory (MB): 200.938
Reported internal fragmentation: 0.00448054%
Bits/key stored: 10.1852
Average FP rate %: 0.963387
And from db_bench (block cache) with jemalloc:
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17063835
$ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17430747
$ #^ 2.1% additional filter storage
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8440400
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
rocksdb.bloom.filter.useful COUNT : 4963889
rocksdb.bloom.filter.full.positive COUNT : 1214081
rocksdb.bloom.filter.full.true.positive COUNT : 1161999
$ #^ 1.04 % observed FP rate
$ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8448592
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
rocksdb.bloom.filter.useful COUNT : 5360933
rocksdb.bloom.filter.full.positive COUNT : 1321315
rocksdb.bloom.filter.full.true.positive COUNT : 1262999
$ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters
(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427
Test Plan: unit test added, 'make check' with gcc, clang and valgrind
Reviewed By: siying
Differential Revision: D22124374
Pulled By: pdillinger
fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
Summary:
Avoid using `cf_consistency` together with `enable_compaction_filter` as
the former heavily uses snapshots while the latter is incompatible with
snapshots.
Also fix a clang-analyze error for a write to a variable that is never
read.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7006
Reviewed By: zhichao-cao
Differential Revision: D22141679
Pulled By: ajkr
fbshipit-source-id: 1840ae238168818a9ab5973f90fd78c067399447
Summary:
Added a `CompactionFilter` that is aware of the stress test's expected state. It only drops key versions that are already covered according to the expected state. It is incompatible with snapshots (same as all `CompactionFilter`s), so disables all snapshot-related features when used in the crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6988
Test Plan:
running a minified blackbox crash test
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --max_key=1000000 -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -value_size_mult=33 --interval=10 --duration=3600
```
Reviewed By: anand1976
Differential Revision: D22072888
Pulled By: ajkr
fbshipit-source-id: 727b9d7a90d5eab18be0ec6cd5a810712ac13320
Summary:
Add crash test for the case of best-efforts recovery.
After a certain amount of time, we kill the db_stress process, randomly delete some certain table files and restart db_stress. Given the randomness of file deletion, it is difficult to verify against a reference for data correctness. Therefore, we just check that the db can restart successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6819
Test Plan:
```
./db_stress -best_efforts_recovery=true -disable_wal=1 -reopen=0
./db_stress -best_efforts_recovery=true -disable_wal=0 -skip_verifydb=1 -verify_db_one_in=0 -continuous_verification_interval=0
make crash_test_with_best_efforts_recovery
```
Reviewed By: anand1976
Differential Revision: D21436753
Pulled By: riversand963
fbshipit-source-id: 0b3605c922a16c37ed17d5ab6682ca4240e47926
Summary:
RocksDB Makefile was assuming existence of 'python' command,
which is not present in CentOS 8. We avoid using 'python' if 'python3' is available.
Also added fancy logic to format-diff.sh to make clang-format-diff.py for Python2 work even with Python3 only (as some CentOS 8 FB machines come equipped)
Also, now use just 'python3' for PYTHON if not found so that an informative
"command not found" error will result rather than something weird.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6883
Test Plan: manually tried some variants, 'make check' on a fresh CentOS 8 machine without 'python' executable or Python2 but with clang-format-diff.py for Python2.
Reviewed By: gg814
Differential Revision: D21767029
Pulled By: pdillinger
fbshipit-source-id: 54761b376b140a3922407bdc462f3572f461d0e9
Summary:
"compressio_parallel_threads" caused several test failure tests. To keep crash test clean, disable it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6816
Test Plan: "make crash_test" to make sure the python script doesn't break
Reviewed By: zhichao-cao
Differential Revision: D21462112
fbshipit-source-id: 9eecc764800da82cd19665dc8b167eacead3310b
Summary:
This commit adds an `compression_parallel_threads` option in
db_stress. It also fixes the naming of parallel compression
option in db_bench to keep it aligned with others.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6722
Reviewed By: pdillinger
Differential Revision: D21091385
fbshipit-source-id: c9ba8c4e5cc327ff9e6094a6dc6a15fcff70f100
Summary:
In crash test, the db directory might be set to /dev/shm or /tmp, in certain environments such as internal testing infrastructure, neither of these directories support direct IO, so direct IO is never enabled in crash test.
This PR sets up SyncPoints in direct IO related code paths to disable O_DIRECT flag in calls to `open`, so the direct IO code paths will be executed, all direct IO related assertions will be checked, but no real direct IO request will be issued to the file system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6727
Test Plan:
export CRASH_TEST_EXT_ARGS="--use_direct_reads=1 --mmap_read=0"
make -j24 crash_test
Reviewed By: zhichao-cao
Differential Revision: D21139250
Pulled By: cheng-chang
fbshipit-source-id: db9adfe78d91aa4759835b1af91c5db7b27b62ee
Summary:
Recently index_type kBinarySearchWithFirstKey is improved so that the API guarantee is exactly the same as other types and it is ready for wide production. We should cover it in crash tst.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6721
Test Plan: Run crash_test
Reviewed By: anand1976
Differential Revision: D21099781
fbshipit-source-id: fda91eba831d9eacbb140c703e9768bb1701f935
Summary:
RocksDB behavior is different while max_open_files is small or large. Add the coverage to small max_open_files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6719
Test Plan: Run crash_test
Reviewed By: pdillinger
Differential Revision: D21081021
fbshipit-source-id: e3e211761a9bd25d93d19a61c1f7b62d48cf5e3c
Summary:
Options.avoid_flush_during_recovery is uncovered in crash_test. Add the coverage with a chance of 1/8, as it is a less frequently used options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6712
Test Plan: Run crash_test and see the option can be used or not used by chance.
Reviewed By: ltamasi
Differential Revision: D21056566
fbshipit-source-id: c3b1521517cfc204786e6ef8c6acd7fffda64793
Summary:
Add env_fault_injection argument to db_stress. When enabled,
FaultInjectionTestEnv will be used instead. Currently this
option does not support running with other env setting.
This will allow
us to later manually produce error when running db_crashtest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6687
Test Plan:
make db_stress -j32
./db_stress --env_fault_injection
./db_stress --env_fault_injection --hdfs // expect error message
Reviewed By: ajkr
Differential Revision: D21014683
Pulled By: yhchiang
fbshipit-source-id: 0724aeac37efd57adb72a37defe6dbd3bfa8106a
Summary:
This was causing db_crashtest.py to wrongly assume an error by parsing the output. Hopefully this will stabilize the crash tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6705
Test Plan: make blackbox_crash_test
Reviewed By: ltamasi
Differential Revision: D21043335
Pulled By: anand1976
fbshipit-source-id: 5cddd112b124d4e2ebd11724a17d4ef0f50c1cf8
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Currently, `db_stress` tests a randomly picked one of `GetLiveFiles`,
`GetSortedWalFiles`, and `GetCurrentWalFile` with a 1/N chance when the
command line parameter `get_live_files_and_wal_files_one_in` is specified.
The problem is that `GetSortedWalFiles` and `GetCurrentWalFile` are unreliable
in the sense that they can return errors if another thread removes a WAL file
while they are executing (which is a perfectly plausible and legitimate scenario).
The patch splits this command line parameter into three (one for each API),
and changes the crash test script so that only `GetLiveFiles` is tested during
our continuous crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6491
Test Plan:
```
make check
python tools/db_crashtest.py whitebox
```
Reviewed By: siying
Differential Revision: D20312200
Pulled By: ltamasi
fbshipit-source-id: e7c3481eddfe3bd3d5349476e34abc9eee5b7dc8
Summary:
This reverts commit 8e309b35bb.
The stress tests are failing . Revert it until we figure the root cause.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6327
Differential Revision: D19537657
Pulled By: maysamyabandeh
fbshipit-source-id: bf34a5dd720825957729e136e9a5a729a240e61a
Peter Dillinger