Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
This commit is for enabling `DBWithTTL` to use `DeteleRange` which it cannot before.
As (int32_t)Timestamp is suffixed to values in `DBWithTTL`, there is no reason that it
cannot use the common used api. I added `DeleteRangeCF` in `DBWithTTLImpl::Write`
so that we can use `DeteleRange` normally. When we run code like
`dbWithTtl->DeleteRange(start, end)`, it executes`WriteBatchInternal::DeleteRange`
internally. Intended to fix https://github.com/facebook/rocksdb/issues/7218
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8384
Test Plan: added corresponded testing logic to existing unit test
Reviewed By: jay-zhuang
Differential Revision: D29176734
fbshipit-source-id: 6874ed979fc08e1d138149d03653e43a75f0e0e6
Summary:
Marked the Ribbon filter and optimize_filters_for_memory features
as production-ready, each enabling memory savings for Bloom-like filters.
Use `NewRibbonFilterPolicy` in place of `NewBloomFilterPolicy` to use
Ribbon filters instead of Bloom, or `ribbonfilter` in place of
`bloomfilter` in configuration string.
Some small refactoring in db_stress.
Removed/refactored unused code in db_bench, in part preparing for future
default possibly being different from "disabled."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8408
Test Plan:
Lots of prior automated, ad-hoc, and "real world" testing.
Updated tests for new API names. Quick db_bench test:
bloom fillrandom
77730 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 89929384
ribbon fillrandom
71492 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 64531384
Reviewed By: mrambacher
Differential Revision: D29140805
Pulled By: pdillinger
fbshipit-source-id: d742c922722421678f95ad85eeb0aaebc9f5e49a
Summary:
This reverts commit 9167ece586.
It was found to reliably trip a compaction picking conflict assertion in a MyRocks unit test. We don't understand why yet so reverting in the meantime.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8410
Test Plan: `make check -j48`
Reviewed By: jay-zhuang
Differential Revision: D29150300
Pulled By: ajkr
fbshipit-source-id: 2de8664f355d6da015e84e5fec2e3f90f49741c8
Summary:
The subcompaction boundary picking logic does not currently guarantee
that all user keys that differ only by timestamp get processed by the same
subcompaction. This can cause issues with the `CompactionIterator` state
machine: for instance, one subcompaction that processes a subset of such KVs
might drop a tombstone based on the KVs it sees, while in reality the
tombstone might not have been eligible to be optimized out.
(See also https://github.com/facebook/rocksdb/issues/6645, which adjusted the way compaction inputs are picked for the
same reason.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8393
Test Plan: Ran `make check` and the crash test script with timestamps enabled.
Reviewed By: jay-zhuang
Differential Revision: D29071635
Pulled By: ltamasi
fbshipit-source-id: f6c72442122b4e581871e096fabe3876a9e8a5a6
Summary:
DBImpl::DumpStats is supposed to do this:
Dump DB stats to LOG
For each CF, dump CFStatsNoFileHistogram to LOG
For each CF, dump CFFileHistogram to LOG
Instead, due to a longstanding bug from 2017 (https://github.com/facebook/rocksdb/issues/2126), it would dump
CFStats, which includes both CFStatsNoFileHistogram and CFFileHistogram,
in both loops, resulting in near-duplicate output.
This fixes the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8380
Test Plan: Manual inspection of LOG after db_bench
Reviewed By: jay-zhuang
Differential Revision: D29017535
Pulled By: pdillinger
fbshipit-source-id: 3010604c4a629a80347f129cd746ce9b0d0cbda6
Summary:
fs_posix.cc GetFreeSpace() calculates free space based upon a call to statvfs(). However, there are two extremely different values in statvfs's returned structure: f_bfree which is free space for root and f_bavail which is free space for non-root users. The existing code uses f_bfree. Many disks have 5 to 10% of the total disk space reserved for root only. Therefore GetFreeSpace() does not realize that non-root users may not have storage available.
This PR detects whether the effective posix user is root or not, then selects the appropriate available space value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8370
Reviewed By: mrambacher
Differential Revision: D29032710
Pulled By: jay-zhuang
fbshipit-source-id: 57feba34ed035615a479956d28f98d85735281c0
Summary:
Added the ability to cancel an in-progress range compaction by storing to an atomic "canceled" variable pointed to within the CompactRangeOptions structure.
Tested via two tests added to db_tests2.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8351
Reviewed By: ajkr
Differential Revision: D28808894
Pulled By: ddevec
fbshipit-source-id: cb321361c9e23b084b188bb203f11c375a22c2dd
Summary:
This is a duplicate of https://github.com/facebook/rocksdb/issues/4948 by mzhaom to fix tests after rebase.
This change is a follow-up to https://github.com/facebook/rocksdb/issues/4927, which made this possible by allowing tombstone dropping/seqnum zeroing optimizations on the last key in the compaction. Now the `largest_seqno != 0` condition suffices to prevent snapshot release triggered compaction from entering an infinite loop.
The issues caused by the extraneous condition `level_and_file.second->num_deletions > 1` are:
- files could have `largest_seqno > 0` forever making it impossible to tell they cannot contain any covering keys
- it doesn't trigger compaction when there are many overwritten keys. Some MyRocks use case actually doesn't use Delete but instead calls Put with empty value to "delete" keys, so we'd like to be able to trigger compaction in this case too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8357
Test Plan: - make check
Reviewed By: jay-zhuang
Differential Revision: D28855340
Pulled By: ajkr
fbshipit-source-id: a261b51eecafec492499e6d01e8e43112f801798
Summary:
Update HISTORY and version to 6.21 on master.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8363
Reviewed By: jay-zhuang
Differential Revision: D28888818
Pulled By: anand1976
fbshipit-source-id: 9e5fac3b99ecc9f3b7d9f21474a39fa50decb117
Summary:
With Ribbon filter work and possible variance in actual bits
per key (or prefix; general term "entry") to achieve certain FP rates,
I've received a request to be able to track actual bits per key in
generated filters. This change adds a num_filter_entries table
property, which can be combined with filter_size to get bits per key
(entry).
This can vary from num_entries in at least these ways:
* Different versions of same key are only counted once in filters.
* With prefix filters, several user keys map to the same filter entry.
* A single filter can include both prefixes and user keys.
Note that FilterBlockBuilder::NumAdded() didn't do anything useful
except distinguish empty from non-empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323
Test Plan: basic unit test included, others updated
Reviewed By: jay-zhuang
Differential Revision: D28596210
Pulled By: pdillinger
fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376
Summary:
Fix a bug that for manual compaction, `max_compaction_bytes` is only
limit the SST files from input level, but not overlapped files on output
level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8269
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D28231044
Pulled By: jay-zhuang
fbshipit-source-id: 9d7d03004f30cc4b1b9819830141436907554b7c
Summary:
By default, try to build with liburing. For make, if ROCKSDB_USE_IO_URING is not set, treat as 1, which means RocksDB will try to build with liburing. For cmake, add WITH_LIBURING to control it, with default on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8322
Test Plan: Build using cmake and make.
Reviewed By: anand1976
Differential Revision: D28586498
fbshipit-source-id: cfd39159ab697f4b93a9293a59c07f839b1e7ed5
Summary:
When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\
heck against memory corruption. This change will also allow more counters to be added in the future for better validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288
Test Plan: Pass all existing tests
Reviewed By: ajkr
Differential Revision: D28369194
fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
Some file systems (especially distributed FS) do not support reopening a file for writing. The ExternalSstFileIngestionJob calls ReopenWritableFile in order to sync the ingested file, which typically makes sense only on a local file system with a page cache (i.e Posix). So this change tries to sync the ingested file only if ReopenWritableFile doesn't return Status::NotSupported().
Tests:
Add a new unit test in external_sst_file_basic_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8296
Reviewed By: jay-zhuang
Differential Revision: D28420865
Pulled By: anand1976
fbshipit-source-id: 380e7f5ff95324997f7a59864a9ac96ebbd0100c
Summary:
Right now return codes by io_uring_submit_and_wait() and io_uring_wait_cqe() are not handled. It is not the good practice. Although these two functions are not supposed to return non-0 values in normal exeuction, people suspect that they might return non-0 value when an interruption happens, and the code might cause hanging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8311
Test Plan: Make sure at least normal test cases still pass.
Reviewed By: anand1976
Differential Revision: D28500828
fbshipit-source-id: 8a76cea9cafbd041102e0b6a8eef9d0bfed7c211
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
This change enables a couple of things:
- Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production"
- The ObjectRegistry is created fewer times and can be re-used
The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166
Reviewed By: zhichao-cao
Differential Revision: D27657952
Pulled By: mrambacher
fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
Summary:
Per previous discussion, change date format in HISTORY.md to follow ISO 8601.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8278
Reviewed By: jay-zhuang
Differential Revision: D28294022
fbshipit-source-id: 563f29c56143519b4a871df82a17dd0a168a578c
Summary:
From HISTORY.md release note:
- Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`.
- Removed unused structure `CompactionFilterContext`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243
Test Plan: added unit tests
Reviewed By: pdillinger
Differential Revision: D28088089
Pulled By: ajkr
fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae
Summary:
An early design of BackupEngine used stackable DB, so I guess a
DB had to opt-in to being backupable. Unfortunately the naming of that
obsolete design still infects our public API and implementation.
This change fixes the public API, with a deprecated
backward-compatibility header. `BackupableDBOptions` is renamed to
`BackupEngineOptions` (copy-replace in the public header) and
backup_engine.h replaces backupable_db.h (present for backward
compatibility). The only other change in backupable_db.h ->
backup_engine.h is cleaning up headers.
Later changes will fix the internal implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8274
Test Plan:
The internal implementation of BackupEngine uses the name
BackupEngineOptions, while the unit tests use the old name
BackupableDBOptions. This gives me confidence that both still work.
Reviewed By: mrambacher
Differential Revision: D28259471
Pulled By: pdillinger
fbshipit-source-id: a25dbe327b9772143488e7bb0ec7139ee42d0613
Summary:
Larger arena block size does provide the benefit of reducing allocation overhead, however it may cause other troubles. For example, allocator is more likely not to allocate them to physical memory and trigger page fault. Weighing the risk, we cap the arena block size to 1MB. Users can always use a larger value if they want.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7907
Test Plan: Run all existing tests
Reviewed By: pdillinger
Differential Revision: D26135269
fbshipit-source-id: b7f55afd03e6ee1d8715f90fa11b6c33944e9ea8
Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
BlockPrefetcher is used by iterators to prefetch data if they
anticipate more data to be used in future and this is valid for forward sequential
scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads
are sequential. This presents problem for MultiGet with large number of
keys when it reseeks index iterator and data block. FilePrefetchBuffer
can end up doing large readahead for reseeks as readahead size
increases exponentially once readahead is enabled. Same issue is with
BlockBasedTableIterator.
Add previous length and offset read as well in BlockPrefetcher (creates
FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to
determine if reads are sequential and then prefetch.
Update the last block read after cache hit to take reads from cache also
in account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394
Test Plan: Add new unit test case
Reviewed By: anand1976
Differential Revision: D23737617
Pulled By: akankshamahajan15
fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3
Summary:
In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue.
Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here.
Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207
Test Plan: added unit test, make crash_test
Reviewed By: riversand963
Differential Revision: D27898839
Pulled By: zhichao-cao
fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e
Summary:
When WriteBufferManager is shared across DBs and column families
to maintain memory usage under a limit, OOMs have been observed when flush cannot
finish but writes continuously insert to memtables.
In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write,
this change will stall incoming writers until flush is completed and memory_usage
drops.
Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_
(memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true.
DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall()
(which adds dummy stall object to the writer's queue).
Then DB is blocked on a state State::Blocked (current write doesn't go
through). WBStallInterface object maintained by every DB instance is added to the queue of
WriteBufferManager.
If multiple DBs tries to write during this stall, they will also be
blocked when check WriteBufferManager::ShouldStall() returns true.
End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory
waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush
to complete and avoid continous stalling if memory usage remains close to buffer_size.
WriterBufferManager::EndWriteStall() is called,
which removes all instances from its queue and signal them to continue.
Their state is changed to State::Running and they are unblocked. DBImpl
then signal all incoming writers of that DB to continue by calling
write_thread_.EndWriteStall() (which removes dummy stall object from the
queue).
DB instance creates WBMStallInterface which is an interface to block and
signal DBs during stall.
When DB needs to be blocked or signalled by WriteBufferManager,
state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898
Test Plan: Added a new test db/db_write_buffer_manager_test.cc
Reviewed By: anand1976
Differential Revision: D26093227
Pulled By: akankshamahajan15
fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Fixes https://github.com/facebook/rocksdb/issues/6245.
Adapted from https://github.com/facebook/rocksdb/issues/8201 and https://github.com/facebook/rocksdb/issues/8205.
Previously we were writing the ingested file's smallest/largest internal keys
with sequence number zero, or `kMaxSequenceNumber` in case of range
tombstone. The former (sequence number zero) is incorrect and can lead
to files being incorrectly ordered. The fix in this PR is to overwrite
boundary keys that have sequence number zero with the ingested file's assigned
sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8209
Test Plan: repro unit test
Reviewed By: riversand963
Differential Revision: D27885678
Pulled By: ajkr
fbshipit-source-id: 4a9f2c6efdfff81c3a9923e915ea88b250ee7b6a
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Since the Ribbon filter schema seems good (compatible back to
6.15.0), this change commits to long term support of the SST schema,
even though we expect the API for enabling Ribbon to change (still
called NewExperimentalRibbonFilterPolicy).
This also adds support for "hybrid" configuration in which some levels
use Bloom (higher levels, lower numbered) for speed and the rest use
Ribbon (lower levels, higher numbered) for memory space efficiency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198
Test Plan: unit test added, crash test support
Reviewed By: jay-zhuang
Differential Revision: D27831232
Pulled By: pdillinger
fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab
Summary:
Extend the DB::GetLiveFilesChecksumInfo API to blob files.
This API is also used by the file_checksum_dump ldb command to dump checksum
of SST files which now also dumps blob files checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8179
Test Plan: Add new unit test
Reviewed By: zhichao-cao
Differential Revision: D27714965
Pulled By: akankshamahajan15
fbshipit-source-id: d8b7343ea845a64c83800336d88cced7152a8c92
Summary:
Resolves https://github.com/facebook/rocksdb/issues/8014
- Add an assertion on `DB::Open` to ensure `db_options.max_open_files` is unlimited if FIFO Compaction is being used.
- This is to align with what the docs mention and to prevent premature data deletion.
- Update tests to work with this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8172
Test Plan:
```bash
$ make check -j$(nproc)
Generated TARGETS Summary:
- 6 libs
- 0 binarys
- 180 tests
```
Reviewed By: ajkr
Differential Revision: D27768792
Pulled By: thejchap
fbshipit-source-id: cf6350535e3a3577fec72bcba75b3c094dc7a6f3
Summary:
Before this PR, `get_iostats_context()` will silently return a nullptr if no thread_local support is detected.
This can be the result of build_detect_platform's failure to compile the simple code snippet on certain platforms, as
reported in https://github.com/facebook/mysql-5.6/issues/904.
To be safe, we should fail the compilation if user does not opt out IOStatsContext and
ROCKSDB_SUPPORT_THREAD_LOCAL is not defined.
If RocksDB relies on c++11, can we just always use thread_local? It turns out there might be
performance concerns (https://github.com/facebook/rocksdb/issues/5774),
which is beyond the scope of this PR. We can revisit this later. Here, we stick to the original impl.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8117
Reviewed By: ajkr
Differential Revision: D27356847
Pulled By: riversand963
fbshipit-source-id: f7d5776842277598d8341b955febb601946801ae
Summary:
* CreateNewBackup(WithMetadata) returning the BackupID of new backup
through optional new output param. This is especially useful with the
new mutithreading support, so that you can transactionally determine the
ID of a backup you create.
* GetBackupInfo / GetLatestBackupInfo for individual backups, so that
you don't have to comb through a vector of backups if you don't want to.
Updated HISTORY.md (including re: BlobDB support as new feature)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8170
Test Plan:
Added test logic to existing tests, to minimize increase in
cost of running tests
Reviewed By: zhichao-cao
Differential Revision: D27680410
Pulled By: pdillinger
fbshipit-source-id: 1fc45b73d81aae293ccd4a43d9583d7fd915d3eb
Summary:
Current flush reason attribution is misleading or incorrect (depending on what the original intention was):
- Flush due to WAL reaching its maximum size is attributed to `kWriteBufferManager`
- Flushes due to full write buffer and write buffer manager are not distinguishable, both are attributed to `kWriteBufferFull`
This changes the first to a new flush reason `kWALFull`, and splits the second between `kWriteBufferManager` and `kWriteBufferFull`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8150
Reviewed By: zhichao-cao
Differential Revision: D27569645
Pulled By: ot
fbshipit-source-id: 7e3c8ca186a6e71976e6b8e937297eebd4b769cc
Summary:
Add support for blob files for backup/restore like table files.
Since DB session ID is currently not supported for blob files (there is no place to store it in
the header), so for blob files uses the
kLegacyCrc32cAndFileSize naming scheme even if
share_files_with_checksum_naming is set to kUseDbSessionId.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8129
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D27408510
Pulled By: akankshamahajan15
fbshipit-source-id: b27434d189a639ef3e6ad165c61a143a2daaf06e
Summary:
A current limitation of backups is that you don't know the
exact database state of when the backup was taken. With this new
feature, you can at least inspect the backup's DB state without
restoring it by opening it as a read-only DB.
Rather than add something like OpenAsReadOnlyDB to the BackupEngine API,
which would inhibit opening stackable DB implementations read-only
(if/when their APIs support it), we instead provide a DB name and Env
that can be used to open as a read-only DB.
Possible follow-up work:
* Add a version of GetBackupInfo for a single backup.
* Let CreateNewBackup return the BackupID of the newly-created backup.
Implementation details:
Refactored ChrootFileSystem to split off new base class RemapFileSystem,
which allows more general remapping of files. We use this base class to
implement BackupEngineImpl::RemapSharedFileSystem.
To minimize API impact, I decided to just add these fields `name_for_open`
and `env_for_open` to those set by GetBackupInfo when
include_file_details=true. Creating the RemapSharedFileSystem adds a bit
to the memory consumption, perhaps unnecessarily in some cases, but this
has been mitigated by (a) only initialize the RemapSharedFileSystem
lazily when GetBackupInfo with include_file_details=true is called, and
(b) using the existing `shared_ptr<FileInfo>` objects to hold most of the
mapping data.
To enhance API safety, RemapSharedFileSystem is wrapped by new
ReadOnlyFileSystem which rejects any attempts to write. This uncovered a
couple of places in which DB::OpenForReadOnly would write to the
filesystem, so I fixed these. Added a release note because this affects
logging.
Additional minor refactoring in backupable_db.cc to support the new
functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142
Test Plan:
new test (run with ASAN and UBSAN), added to stress test and
ran it for a while with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27535408
Pulled By: pdillinger
fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
Summary:
According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last
key in the previous partition" so that SeekForPrev() in prefix mode can return correct result.
The prefix of the last key in the previous partition does not necessarily have the same prefix
as the first key in the current partition. Regardless of the first key in current partition, the
prefix of the last key in the previous partition should be added. The existing code, however,
does not follow this. Furthermore, there is another issue: when finishing current filter partition,
`FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively
overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds
to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding
the bloom of the prefix of the last key of the previous partition.
Prefix extractor is FixedLength.2.
```
[ filter part 1 ] [ filter part 2 ]
abc d
```
When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc"
but smaller than "d".
If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build
incorrect iterator tree in non-total-order mode.
Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion
error when checking on an arbitrary key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137
Test Plan:
```
make check
```
Without this fix, the following command will fail pretty soon.
```
./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \
--avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \
--batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \
--bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \
--checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \
--compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \
--compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \
--compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \
--continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \
--db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \
--enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \
--format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \
--get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \
--iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \
--log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \
--max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \
--max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \
--max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \
--nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \
--periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \
--readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \
--snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \
--sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \
--target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \
--top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \
--use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \
--use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \
--verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \
--write_dbid_to_manifest=1 --writepercent=35
```
Reviewed By: pdillinger
Differential Revision: D27553054
Pulled By: riversand963
fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98
Summary:
Add request_id in IODebugContext which will be populated by
underlying FileSystem for IOTracing purposes. Update IOTracer to trace
request_id in the tracing records. Provided API
IODebugContext::SetRequestId which will set the request_id and enable
tracing for request_id. The API hides the implementation and underlying
file system needs to call this API directly.
Update DB::StartIOTrace API and remove redundant Env* from the
argument as its not used and DB already has Env that is passed down to
IOTracer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8045
Test Plan: Update unit test.
Differential Revision: D26899871
Pulled By: akankshamahajan15
fbshipit-source-id: 56adef52ee5af0fb3060b607c3af1ec01635fa2b
Summary:
Return early in case there are zero data blocks when
`BlockBasedTableBuilder::EnterUnbuffered()` is called. This crash can
only be triggered by applying dictionary compression to SST files that
contain only range tombstones. It cannot be triggered by a low buffer
limit alone since we only consider entering unbuffered mode after
buffering a data block causing the limit to be breached, or `Finish()`ing the file. It also cannot
be triggered by a totally empty file because those go through
`Abandon()` rather than `Finish()` so unbuffered mode is never entered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8141
Test Plan: added a unit test that repro'd the "Floating point exception"
Reviewed By: riversand963
Differential Revision: D27495640
Pulled By: ajkr
fbshipit-source-id: a463cfba476919dc5c5c380800a75a86c31ffa23
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
Akanksha Mahajan