Summary:
Changes:
- Adding numa_aware flag to db_bench.cc
- Using numa.h library to bind memory and cpu of threads to a fixed NUMA node
Result: There seems to be no significant change in the micros/op time with numa_aware enabled. I also tried this with other implementations, including a combination of pthread_setaffinity_np, sched_setaffinity and set_mempolicy methods. It'd be great if someone could point out where I'm going wrong and if we can achieve a better micors/op.
Test Plan:
Ran db_bench tests using following command:
./db_bench --db=/mnt/tmp --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=/mnt/tmp --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --duration=300 --benchmarks=readwhilewriting --use_existing_db=1 --num=157286400 --threads=24 --writes_per_second=10240 --numa_aware=[False/True]
The tests were run in private devserver with 24 cores and the db was prepopulated using filluniquerandom test. The tests resulted in 0.145 us/op with numa_aware=False and 0.161 us/op with numa_aware=True.
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin, igor
Subscribers: igor, leveldb
Differential Revision: https://reviews.facebook.net/D19353
Summary:
SimpleWriteTimeoutTest has two parts: 1) insert two large key/values
to make memtable full and expect both of them are successful; 2) insert
another key / value and expect it to be timed-out. Previously we also
set a timeout in the first step, but this might sometimes cause
false alarm.
This diff makes the first two writes run without timeout setting.
Test Plan:
export ROCKSDB_TESTS=Time
make db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19461
Summary:
ReadInternalKey() will assign correct value anyway. Initialize it to
true to suppress compiler error reported
https://github.com/facebook/rocksdb/issues/186
Test Plan: I cannot reproduce it but this is obvious
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19467
Summary: Removed a variable that is only used in assertion check.
Test Plan: make release
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19455
Summary:
This diff allows the I/O stats about Flush and Compaction to be reported
in a more accurate way. Instead of measuring the size of a file, it
measure I/O cost in per read / write basis.
Test Plan: make all check
Reviewers: sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19383
Summary: Update HISTORY.md to include TimeOut write API and compaction update.
Test Plan: n/a
Reviewers: ljin, sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19449
Summary:
This diff adds timeout_hint_us to WriteOptions. If it's non-zero, then
1) writes associated with this options MAY be aborted when it has been
waiting for longer than the specified time. If an abortion happens,
associated writes will return Status::TimeOut.
2) the stall time of the associated write caused by flush or compaction
will be limited by timeout_hint_us.
The default value of timeout_hint_us is 0 (i.e., OFF.)
The statistics of timeout writes will be recorded in WRITE_TIMEDOUT.
Test Plan:
export ROCKSDB_TESTS=WriteTimeoutAndDelayTest
make db_test
./db_test
Reviewers: igor, ljin, haobo, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18837
Summary:
Add TimedWait() API to CondVar, which will be used in the future to
support TimedOut Write API and Rate limiter.
Test Plan: make db_test -j32
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19431
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
Before this diff, we're deciding enable_compression in CompactionPicker and then we're deciding final compression type in DBImpl. This is kind of confusing.
After the diff, the final compression type will be decided in CompactionPicker.
The reason for this is that I want CompactFiles() to specify output compression type, so that people can mix and match compression styles in their compaction algorithms. This diff makes it much easier to do that.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19137
Commit 6634844dba by sdong
Two small fixes in db_test
Summary:
Two fixes:
(1) WalDir to pick a directory under TmpDir to allow two tests running in parallel without impacting each other
(2) kBlockBasedTableWithWholeKeyHashIndex is disabled by mistake (I assume). Enable it.
Test Plan: ./db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: nkg-, igor, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19389
Summary:
In this patch, we enhance HashLinkList memtable to reduce performance outliers when a bucket contains too many entries. We switch to skip list for this case to enable binary search.
Add threshold_use_skiplist parameter to determine when a bucket needs to switch to skip list.
The new data structure is documented in comments in the codes.
Test Plan:
make all check
set threshold_use_skiplist in several tests
Reviewers: yhchiang, haobo, ljin
Reviewed By: yhchiang, ljin
Subscribers: nkg-, xjin, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19299
Summary:
Two fixes:
(1) WalDir to pick a directory under TmpDir to allow two tests running in parallel without impacting each other
(2) kBlockBasedTableWithWholeKeyHashIndex is disabled by mistake (I assume). Enable it.
Test Plan: ./db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: nkg-, igor, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19389
Summary:
Now that the arena is used to allocate space for hashskiplist's bucket. The bucket size
need to be set small enough to avoid "should_flush_" failure in memtable's assertion.
Test Plan:
make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: igor
Differential Revision: https://reviews.facebook.net/D19371
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
Bloomfilter and hashskiplist's buckets_ allocated by memtable's arena
DynamicBloom: pass arena via constructor, allocate space in SetTotalBits
HashSkipListRep: allocate space of buckets_ using arena.
do not delete it in deconstructor because arena would take care of it.
Several test files are changed.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19335
Summary:
Correct the library loading for zlib in RocksJava: zlib should
be loaded by loadLibrary("z") instead of loadLibrary("zlib").
Test Plan:
make rocksdbjava
cd java
make db_bench
./jdb_bench.sh --compression_type=zlib
Reviewers: sdong, ljin, ankgup87
Reviewed By: ankgup87
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19341
Summary: Code cleaning up, since we are already using __STDC_FORMAT_MACROS in printing uint64_t, change other places. Only logging is changed.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: dhruba, yhchiang, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19113
Summary:
Task 4580155. Some conditions in DBImpl::MakeRoomForWrite can be cached in
ColumnFamilyData, because theirs value can be changed only during compaction,
adding new memtable and/or add recalculation of compaction score.
These conditions are:
cfd->imm()->size() == cfd->options()->max_write_buffer_number - 1
cfd->current()->NumLevelFiles(0) >= cfd->options()->level0_stop_writes_trigger
cfd->options()->soft_rate_limit > 0.0 &&
(score = cfd->current()->MaxCompactionScore()) > cfd->options()->soft_rate_limit
cfd->options()->hard_rate_limit > 1.0 &&
(score = cfd->current()->MaxCompactionScore()) > cfd->options()->hard_rate_limit
P.S.
As it's my first diff, Siying suggested to add everybody as a reviewers
for this diff. Sorry, if I forgot someone or add someone by mistake.
Test Plan: make all check
Reviewers: haobo, xjin, dhruba, yhchiang, zagfox, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19311
Summary:
Fixed the following warning:
util/options.cc: In constructor ‘rocksdb::ColumnFamilyOptions::ColumnFamilyOptions(const rocksdb::Options&)’:
util/options.cc:157:58: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (max_bytes_for_level_multiplier_additional.size() < num_levels) {
^
Test Plan: make all check
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19293
Summary: It seems to me that when ever function MemTableRep::GetIterator(const Slice& slice) is used, we can use MemTableRep::GetDynamicPrefixIterator() instead. Just delete it to simplify the codes.
Test Plan: make all check
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19281
Summary:
Currently, when num_levels has been changed to > 7, internally
it will not resize max_bytes_for_level_multiplier_additional.
As a result, max_bytes_for_level_multiplier_additional.size() will
be smaller than num_levels, which causes heap-buffer-overflow.
Test Plan: make all check
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19275
Summary:
Move stats related member variables of FileMetaData to the bottom to
improve cache locality of normal DB operations.
Test Plan: make
Reviewers: haobo, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19287
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
RandomGenerator::Generate() currently has an assertion len < data_.size().
However, it is actually fine to have len == data_.size().
This diff change the assertion to len <= data_.size().
Test Plan:
make db_bench
./db_bench
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19269
Summary:
Enable the random values in Java DB Bench to be generated based
on the compression_ratio specified in the command-line arguments.
Test Plan:
make rocksdbjava
java/jdb_bench.sh
Reviewers: sdong, ankgup87, haobo
Reviewed By: haobo
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19101
Summary:
Revert the default setting of InitFromCmdLineArgs() as all the callers
currently provide full set of arguments.
Test Plan:
make reduce_levels_test
./reduce_levels_test
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19257
Summary:
Fixed the following compile error.
tools/reduce_levels_test.cc:89:31: error: no matching function for call to 'InitFromCmdLineArgs'
LDBCommand* level_reducer = LDBCommand::InitFromCmdLineArgs(args);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./util/ldb_cmd.h:56:22: note: candidate function not viable: requires 3 arguments, but 1 was provided
static LDBCommand* InitFromCmdLineArgs(
^
./util/ldb_cmd.h:62:22: note: candidate function not viable: requires 4 arguments, but 1 was provided
static LDBCommand* InitFromCmdLineArgs(
^
1 error generated.
Test Plan:
make reduce_levels_test
./reduce_levels_test
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19251
Ankit Gupta