Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).
The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.
When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748
Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.
Reviewed By: pdillinger
Differential Revision: D25754492
Pulled By: ajkr
fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
This PR updates `MemTable::Add()`, `MemTable::Update()`, and
`MemTable::UpdateCallback()` to return `Status` objects, and adapts the
client code in `MemTableInserter`. The goal is to prepare these
functions for key-value checksum, where we want to verify key-value
integrity while adding to memtable. After this PR, the memtable mutation
functions can report a failed integrity check by returning `Status::Corruption`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7656
Reviewed By: riversand963
Differential Revision: D24900497
Pulled By: ajkr
fbshipit-source-id: 1a7e80581e3774676f2bbba2f0a0b04890f40009
Summary:
An application may accidentally write merge operands without properly configuring `merge_operator`. We should alert them as early as possible that there's an API misuse. Previously RocksDB only notified them when a query or background operation needed to merge but couldn't. With this PR, RocksDB notifies them of the problem before applying the merge operand to the memtable (although it may already be in WAL, which seems it'd cause a crash loop until they enable `merge_operator`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7667
Reviewed By: riversand963
Differential Revision: D24933360
Pulled By: ajkr
fbshipit-source-id: 3a4a2ceb0b7aed184113dd03b8efd735a8332f7f
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
Preliminary user-timestamp support for delete.
If ["a", ts=100] exists, you can delete it by calling `DB::Delete(write_options, key)` in which `write_options.timestamp` points to a `ts` higher than 100.
Implementation
A new ValueType, i.e. `kTypeDeletionWithTimestamp` is added for deletion marker with timestamp.
The reason for a separate `kTypeDeletionWithTimestamp`: RocksDB may drop tombstones (keys with kTypeDeletion) when compacting them to the bottom level. This is OK and useful if timestamp is disabled. When timestamp is enabled, should we still reuse `kTypeDeletion`, we may drop the tombstone with a more recent timestamp, causing deleted keys to re-appear.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6253
Reviewed By: ltamasi
Differential Revision: D20995328
Pulled By: riversand963
fbshipit-source-id: a9e5c22968ad76f98e3dc6ee0151265a3f0df619
Summary:
We found some files containing nothing but negative range tombstones,
and unsurprisingly their metadata specified a negative range, which made
things crash. Time to add a bit of user input validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6788
Reviewed By: zhichao-cao
Differential Revision: D21343719
Pulled By: ajkr
fbshipit-source-id: f1c16e4c3e9fa150958c8c866176632a3206fb74
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
During recovery, multiple (un)prepared batches could exist in the same WAL record due to group commit. This breaks an assertion in `MemTableInserter::MarkBeginPrepare`.
To fix, reset unprepared_batch_ to false after `MarkEndPrepare`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6419
Differential Revision: D19896148
Pulled By: lth
fbshipit-source-id: b1a32ef88f775a0881264a18bd1a4a5b8c85eee3
Summary:
https://github.com/facebook/rocksdb/pull/6177 introduced a data race
involving `MemTableList::InstallNewVersion` and `MemTableList::NumFlushed`.
The patch fixes this by caching whether the current version has any
memtable history (i.e. flushed memtables that are kept around for
transaction conflict checking) in an `std::atomic<bool>` member called
`current_has_history_`, similarly to how `current_memory_usage_excluding_last_`
is handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6187
Test Plan:
```
make clean
COMPILE_WITH_TSAN=1 make db_test -j24
./db_test
```
Differential Revision: D19084059
Pulled By: ltamasi
fbshipit-source-id: 327a5af9700fb7102baea2cc8903c085f69543b9
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. Part of the issue
is that trimming can potentially be scheduled even if there is no memtable
history. The patch adds a check that fixes this.
See also https://github.com/facebook/rocksdb/pull/6169.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6177
Test Plan:
Compared `perf` output for
```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```
before and after the change. There is a significant reduction for the call chain
`rocksdb::DBImpl::TrimMemtableHistory` -> `rocksdb::ColumnFamilyData::InstallSuperVersion` ->
`rocksdb::ThreadLocalPtr::StaticMeta::Scrape` even without https://github.com/facebook/rocksdb/pull/6169.
Differential Revision: D19057445
Pulled By: ltamasi
fbshipit-source-id: dff81882d7b280e17eda7d9b072a2d4882c50f79
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.
Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.
For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.
eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```
Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```
This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627
Differential Revision: D16584130
Pulled By: lth
fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
Summary:
In previous https://github.com/facebook/rocksdb/issues/5079, we added user-specified timestamp to `DB::Get()` and `DB::Put()`. Limitation is that these two functions may cause extra memory allocation and key copy. The reason is that `WriteBatch` does not allocate extra memory for timestamps because it is not aware of timestamp size, and we did not provide an API to assign/update timestamp of each key within a `WriteBatch`.
We address these issues in this PR by doing the following.
1. Add a `timestamp_size_` to `WriteBatch` so that `WriteBatch` can take timestamps into account when calling `WriteBatch::Put`, `WriteBatch::Delete`, etc.
2. Add APIs `WriteBatch::AssignTimestamp` and `WriteBatch::AssignTimestamps` so that application can assign/update timestamps for each key in a `WriteBatch`.
3. Avoid key copy in `GetImpl` by adding new constructor to `LookupKey`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
If the API extension looks good, I will add more unit tests.
Some simple benchmark using db_bench.
```
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000 -disable_wal=true
```
Master is at a78503bd6c.
```
| | readrandom | fillrandom |
| master | 15.53 MB/s | 25.97 MB/s |
| PR5502 | 16.70 MB/s | 25.80 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5502
Differential Revision: D16340894
Pulled By: riversand963
fbshipit-source-id: 51132cf792be07d1efc3ac33f5768c4ee2608bb8
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
Savepoints are assumed to be used in a stack-wise fashion (only
the top element should be used), so they were stored by `WriteBatch`
in a member variable `save_points` using an std::stack.
Conceptually this is fine, but the implementation had a few issues:
- the `save_points_` instance variable was a plain pointer to a heap-
allocated `SavePoints` struct. The destructor of `WriteBatch` simply
deletes this pointer. However, the copy constructor of WriteBatch
just copied that pointer, meaning that copying a WriteBatch with
active savepoints will very likely have crashed before. Now a proper
copy of the savepoints is made in the copy constructor, and not just
a copy of the pointer
- `save_points_` was an std::stack, which defaults to `std::deque` for
the underlying container. A deque is a bit over the top here, as we
only need access to the most recent savepoint (i.e. stack.top()) but
never any elements at the front. std::deque is rather expensive to
initialize in common environments. For example, the STL implementation
shipped with GNU g++ will perform a heap allocation of more than 500
bytes to create an empty deque object. Although the `save_points_`
container is created lazily by RocksDB, moving from a deque to a plain
`std::vector` is much more memory-efficient. So `save_points_` is now
a vector.
- `save_points_` was changed from a plain pointer to an `std::unique_ptr`,
making ownership more explicit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5192
Differential Revision: D15024074
Pulled By: maysamyabandeh
fbshipit-source-id: 5b128786d3789cde94e46465c9e91badd07a25d7
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Wrong I overwrite `WriteBatch::Handler::Continue` to return _false_ at some point, I always get the `Status::Corruption` error.
I don't think this check is used correctly here: The counter in `found` cannot reflect all entries in the WriteBatch when we exit the loop early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4478
Differential Revision: D10317416
Pulled By: yiwu-arbug
fbshipit-source-id: cccae3382805035f9b3239b66682b5fcbba6bb61
Summary:
This adds support for writing unprepared batches based on size defined in `TransactionOptions::max_write_batch_size`. This is done by overriding methods that modify data (Put/Delete/SingleDelete/Merge) and checking first if write batch size has exceeded threshold. If so, the write batch is written to DB as an unprepared batch.
Support for Commit/Rollback for unprepared batch is added as well. This has been done by simply extending the WritePrepared Commit/Rollback logic to take care of all unprep_seq numbers either when updating prepare heap, or adding to commit map. For updating the commit map, this logic exists inside `WriteUnpreparedCommitEntryPreReleaseCallback`.
A test change was also made to have transactions unregister themselves when committing without prepare. This is because with write unprepared, there may be unprepared entries (which act similarly to prepared entries) already when a commit is done without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4104
Differential Revision: D8785717
Pulled By: lth
fbshipit-source-id: c02006e281ec1ce00f628e2a7beec0ee73096a91
Summary:
- Avoid `strdup` to use jemalloc on Windows
- Use `size_t` for consistency
- Add GCC 8 to Travis
- Add CMAKE_BUILD_TYPE=Release to Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3433
Differential Revision: D6837948
Pulled By: sagar0
fbshipit-source-id: b8543c3a4da9cd07ee9a33f9f4623188e233261f
Summary:
This adds support for recovering WriteUnprepared transactions through the following changes:
- The information in `RecoveredTransaction` is extended so that it can reference multiple batches.
- `MarkBeginPrepare` is extended with a bool indicating whether it is an unprepared begin, and this is passed down to `InsertRecoveredTransaction` to indicate whether the current transaction is prepared or not.
- `WriteUnpreparedTxnDB::Initialize` is overridden so that it will rollback unprepared transactions from the recovered transactions. This can be done without updating the prepare heap/commit map, because this is before the DB has finished initializing, and after writing the rollback batch, those data structures should not contain information about the rolled back transaction anyway.
Commit/Rollback of live transactions is still unimplemented and will come later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4078
Differential Revision: D8703382
Pulled By: lth
fbshipit-source-id: 7e0aada6c23bd39299f1f20d6c060492e0e6b60a
Summary:
This adds a new WAL marker of type kTypeBeginUnprepareXID.
Also, DBImpl now contains a field called batch_per_txn (meaning one WriteBatch per transaction, or possibly multiple WriteBatches). This would also indicate that this DB is using WriteUnprepared policy.
Recovery code would be able to make use of this extra field on DBImpl in a separate diff. For now, it is just used to determine whether the WAL is compatible or not.
Closes https://github.com/facebook/rocksdb/pull/4069
Differential Revision: D8675099
Pulled By: lth
fbshipit-source-id: ca27cae1738e46d65f2bb92860fc759deb874749
Summary:
The WriteBatch::Iterate will try with a larger sequence number if the memtable reports a duplicate. This status is specified with TryAgain status. So far the assumption was that the last entry in the batch will never return TryAgain, which is correct when WAL is created via WritePrepared since it always appends a batch separator if a natural one does not exist. However when reading a WAL generated by WriteCommitted this batch separator might not exist. Although WritePrepared is not supposed to be able to read the WAL generated by WriteCommitted we should avoid confusing scenarios in which the behavior becomes unpredictable. The path fixes that by allowing TryAgain even for the last entry of the write batch.
Closes https://github.com/facebook/rocksdb/pull/3747
Differential Revision: D7708391
Pulled By: maysamyabandeh
fbshipit-source-id: bfaddaa9b14a4cdaff6977f6f63c789a6ab1ee0d
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Move DuplicateDetector and SetComparator to its own header file in util. It would also address a complaint in the unity test.
Closes https://github.com/facebook/rocksdb/pull/3567
Differential Revision: D7163268
Pulled By: maysamyabandeh
fbshipit-source-id: 6ddf82773473646dbbc1284ae601a78c4907c778
Summary:
Fix the following bugs:
- During recovery a duplicate key was inserted twice into the write batch of the recovery transaction,
once when the memtable returns false (because it was duplicates) and once for the 2nd attempt. This would result into different SubBatch count measured when the recovered transactions is committing.
- If a cf is flushed during recovery the memtable is not available to assist in detecting the duplicate key. This could result into not advancing the sequence number when iterating over duplicate keys of a flushed cf and hence inserting the next key with the wrong sequence number.
- SubBacthCounter would reset the comparator to default comparator after the first duplicate key. The 2nd duplicate key hence would have gone through a wrong comparator and not being detected.
Closes https://github.com/facebook/rocksdb/pull/3562
Differential Revision: D7149440
Pulled By: maysamyabandeh
fbshipit-source-id: 91ec317b165f363f5d11ff8b8c47c81cebb8ed77
Summary:
These are optimization that we applied to improve sysbech's update_noindex performance.
1. Make use of LIKELY compiler hint
2. Move std::atomic so the subclass
3. Make use of skip_prepared in non-2pc transactions.
Closes https://github.com/facebook/rocksdb/pull/3512
Differential Revision: D7000075
Pulled By: maysamyabandeh
fbshipit-source-id: 1ab8292584df1f6305a4992973fb1b7933632181
Summary:
Right now, users will encounter unexpected bahavior if they use key or value larger than 4GB. We should explicitly fail the queriers.
Closes https://github.com/facebook/rocksdb/pull/3484
Differential Revision: D6953895
Pulled By: siying
fbshipit-source-id: b60491e1af064fc5d52971956661f6c18ceac24f
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455
Differential Revision: D6873699
Pulled By: maysamyabandeh
fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
mrambacher