Summary:
Previously we attempted to rename "LOG" to "LOG.old.*" without checking
its existence first. "LOG" had no reason to exist in a new DB.
Errors in renaming a non-existent "LOG" were swallowed via
`PermitUncheckedError()` so things worked. However the storage service's
error monitoring was detecting all these benign rename failures. So it
is better to fix it. Also with this PR we can now distinguish rename failure
for other reasons and return them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8622
Test Plan: new unit test
Reviewed By: akankshamahajan15
Differential Revision: D30115189
Pulled By: ajkr
fbshipit-source-id: e2f337ffb2bd171be0203172abc8e16e7809b170
Summary:
- Added Type/CreateFromString
- Added ability to load EventListeners to DBOptions
- Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473
Reviewed By: zhichao-cao
Differential Revision: D29901488
Pulled By: mrambacher
fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache.
Tests:
Results from cache_bench and db_bench don't show any regression due to these changes.
cache_bench results before and after this change -
Command
```./cache_bench -ops_per_thread=10000000 -threads=1```
Before
```Complete in 40.688 s; QPS = 245774```
```Complete in 40.486 s; QPS = 246996```
```Complete in 42.019 s; QPS = 237989```
After
```Complete in 40.672 s; QPS = 245869```
```Complete in 44.622 s; QPS = 224107```
```Complete in 42.445 s; QPS = 235599```
db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 -
Commands
```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true```
```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300```
Before
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found)
```
After
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271
Reviewed By: zhichao-cao
Differential Revision: D28357511
Pulled By: anand1976
fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue.
Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here.
Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207
Test Plan: added unit test, make crash_test
Reviewed By: riversand963
Differential Revision: D27898839
Pulled By: zhichao-cao
fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e
Summary:
Unittest reports no space from time to time, which can be reproduced on a small memory machine with SHM. It's caused by large WAL files generated during the test, which is preallocated, but didn't truncate during close(). Adding the missing APIs to set preallocation.
It added arm test as nightly build, as the test runs more than 1 hour.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8204
Test Plan: test on small memory arm machine
Reviewed By: mrambacher
Differential Revision: D27873145
Pulled By: jay-zhuang
fbshipit-source-id: f797c429d6bc13cbcc673bc03fcc72adda55f506
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Current flush reason attribution is misleading or incorrect (depending on what the original intention was):
- Flush due to WAL reaching its maximum size is attributed to `kWriteBufferManager`
- Flushes due to full write buffer and write buffer manager are not distinguishable, both are attributed to `kWriteBufferFull`
This changes the first to a new flush reason `kWALFull`, and splits the second between `kWriteBufferManager` and `kWriteBufferFull`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8150
Reviewed By: zhichao-cao
Differential Revision: D27569645
Pulled By: ot
fbshipit-source-id: 7e3c8ca186a6e71976e6b8e937297eebd4b769cc
Summary:
Add the new Append and PositionedAppend API to env WritableFile. User is able to benefit from the write checksum handoff API when using the legacy Env classes. FileSystem already implemented the checksum handoff API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8071
Test Plan: make check, added new unit test.
Reviewed By: anand1976
Differential Revision: D27177043
Pulled By: zhichao-cao
fbshipit-source-id: 430c8331fc81099fa6d00f4fff703b68b9e8080e
Summary:
Extend support to track blob files in SST File manager.
This PR notifies SstFileManager whenever a new blob file is created,
via OnAddFile and an obsolete blob file deleted via OnDeleteFile
and delete file via ScheduleFileDeletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D26891237
Pulled By: akankshamahajan15
fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
Right now all I/O failures under PartitionIndexReader::CacheDependencies() is swallowed. This doesn't impact correctness but we've made a decision that any I/O error in read path now should be returned to users for awareness. Return errors in those cases instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7297
Test Plan: Add a new unit test that ingest errors in this code path and see Get() fails. Only one I/O path is hit in PartitionIndexReader::CacheDependencies(). Several option changes are attempt but not able to got other pread paths triggered. Not sure whether other failure cases would be even possible. Would rely on continuous stress test to validate it.
Reviewed By: anand1976
Differential Revision: D23257950
fbshipit-source-id: 859dbc92fa239996e1bb378329344d3d54168c03
Summary:
There's a potential deadlock caused by MockTimeEnv time value get to a large number, which causes TimedWait() wait forever. The test misuses the microseconds as seconds, making it more likely to happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7277
Reviewed By: pdillinger
Differential Revision: D23183873
Pulled By: jay-zhuang
fbshipit-source-id: 6fc38ebd40b4125a99551204b271f91a27e70086
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223
Reviewed By: riversand963
Differential Revision: D23056737
Pulled By: jay-zhuang
fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
Fsyncing files is not providing more test coverage in many tests. Provide an option in SpecialEnv to turn it off to speed it up and enable this option in some tests with relatively long run time.
Most of those tests can be divided as parameterized gtest too. This two speed up approaches are orthogonal and we can do both if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7036
Test Plan: Run all tests and make sure they pass.
Reviewed By: ltamasi
Differential Revision: D22268084
fbshipit-source-id: 6d4a838a1b7328c13931a2a5d93de57aa02afaab
Summary:
This very old test code bug was causing a new valgrind failure
in MultiGetDeadlineExceeded
Also fix hang in MultiGetDeadlineExceeded by unifying with some logic from another test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6803
Test Plan: run that unit test under valgrind, make check
Reviewed By: siying
Differential Revision: D21388470
Pulled By: pdillinger
fbshipit-source-id: 0ce99d6d5eb8cd3195b17406892c8c5cff5fa5dd
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.
Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.
Example with full filter thrashing "cliff":
$ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
...
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 14181
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 476
rocksdb.block.cache.data.add COUNT : 12749
rocksdb.block.cache.data.add.redundant COUNT : 18
rocksdb.block.cache.filter.add COUNT : 1003
rocksdb.block.cache.filter.add.redundant COUNT : 217
rocksdb.block.cache.index.add COUNT : 429
rocksdb.block.cache.index.add.redundant COUNT : 241
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 1182223
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 302728
rocksdb.block.cache.data.add COUNT : 31425
rocksdb.block.cache.data.add.redundant COUNT : 12
rocksdb.block.cache.filter.add COUNT : 795455
rocksdb.block.cache.filter.add.redundant COUNT : 130238
rocksdb.block.cache.index.add COUNT : 355343
rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681
Test Plan: Some manual testing (above) and unit test covering key metrics is included
Reviewed By: ltamasi
Differential Revision: D21134113
Pulled By: pdillinger
fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Add oldest snapshot sequence property, so we can use `db.GetProperty("rocksdb.oldest-snapshot-sequence")` to get the sequence number of the oldest snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6228
Differential Revision: D19264145
Pulled By: maysamyabandeh
fbshipit-source-id: 67fbe5304d89cbc475bd404e30d1299f7b11c010
Summary:
This change enables custom implementations of FilterPolicy to
wrap a variety of NewBloomFilterPolicy and select among them based on
contextual information such as table level and compaction style.
* Moves FilterBuildingContext to public API and elaborates it with more
useful data. (It would be nice to put more general options-like data,
but at the time this object is constructed, we are using internal APIs
ImmutableCFOptions and MutableCFOptions and don't have easy access to
ColumnFamilyOptions that I can tell.)
* Renames BloomFilterPolicy::GetFilterBitsBuilderInternal to
GetBuilderWithContext, because it's now public.
* Plumbs through the table's "level_at_creation" for filter building
context.
* Simplified some tests by adding GetBuilder() to
MockBlockBasedTableTester.
* Adds test as DBBloomFilterTest.ContextCustomFilterPolicy, including
sample wrapper class LevelAndStyleCustomFilterPolicy.
* Fixes a cross-test bug in DBBloomFilterTest.OptimizeFiltersForHits
where it does not reset perf context.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6088
Test Plan: make check, valgrind on db_bloom_filter_test
Differential Revision: D18697817
Pulled By: pdillinger
fbshipit-source-id: 5f987a2d7b07cc7a33670bc08ca6b4ca698c1cf4
Summary:
Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice.
As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816
Test Plan:
make check
make asan_check
asan_crash_test
Differential Revision: D18408676
Pulled By: anand1976
fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d
Summary:
Most existing RocksDB unit tests run on `Env::Default()`. It will be useful to port the unit tests to non-default environments, e.g. `HdfsEnv`, etc.
This pull request is one step towards this goal. If RocksDB unit tests are built with a static library exposing a function `RegisterCustomObjects()`, then it is possible to implement custom object registrar logic in the library. RocksDB unit test can call `RegisterCustomObjects()` at the beginning.
By default, `ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS` is not defined, thus this PR has no impact on existing RocksDB because `RegisterCustomObjects()` is a noop.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5676
Differential Revision: D16679157
Pulled By: riversand963
fbshipit-source-id: aca571af3fd0525277cdc674248d0fe06e060f9d
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
Improve the iterators performance when the user explicitly sets the readahead size via `ReadOptions.readahead_size`.
1. Stop creating new table readers when the user explicitly sets readahead size.
2. Make use of an internal buffer based on `FilePrefetchBuffer` instead of using `ReadaheadRandomAccessFileReader`, to handle the user readahead requests (for both buffered and direct io cases).
3. Add `readahead_size` to db_bench.
**Benchmarks:**
https://gist.github.com/sagar0/53693edc320a18abeaeca94ca32f5737
For 1 MB readahead, Buffered IO performance improves by 28% and Direct IO performance improves by 50%.
For 512KB readahead, Buffered IO performance improves by 30% and Direct IO performance improves by 67%.
**Test Plan:**
Updated `DBIteratorTest.ReadAhead` test to make sure that:
- no new table readers are created for iterators on setting ReadOptions.readahead_size
- At least "readahead" number of bytes are actually getting read on each iterator read.
TODO later:
- Use similar logic for compactions as well.
- This ties in nicely with #4052 and paves the way for removing ReadaheadRandomAcessFile later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5246
Differential Revision: D15107946
Pulled By: sagar0
fbshipit-source-id: 2c1149729ca7d779e4e8b7710ba6f4e8cbfd3bea
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.
Tests:
1. Unit tests
2. make check
3. db_bench -
TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom : 0.167 micros/op 5983920 ops/sec; 426.2 MB/s (1000000 of 1000000 found)
Multireadrandom with batch size 1:
multireadrandom : 0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754
Differential Revision: D13363550
Pulled By: anand1976
fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4
Summary:
Introduce the first CPU timing counter, perf_context.get_cpu_nanos. This opens a door to more CPU counters in the future.
Only Posix Env has it implemented using clock_gettime() with CLOCK_THREAD_CPUTIME_ID. How accurate the counter is depends on the platform.
Make PerfStepTimer to take an Env as an argument, and sometimes pass it in. The direct reason is to make the unit tests to use SpecialEnv where we can ingest logic there. But in long term, this is a good change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4741
Differential Revision: D13287798
Pulled By: siying
fbshipit-source-id: 090361049d9d5095d1d1a369fe1338d2e2e1c73f
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
The new case is directIO = true, write_global_seqno = false in which we no longer write global_seqno to the external SST file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4614
Differential Revision: D12885001
Pulled By: riversand963
fbshipit-source-id: 7541bdc608b3a0c93d3c3c435da1b162b36673d4
Adam Retter