Tag:
Branch:
Tree:
ccb4f047ae
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
142 Commits (ccb4f047ae0c6538b20090b0d70f80818c79482d)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Andrew Kryczka
|
d5d8920f2c |
Fix race condition with WAL tracking and `FlushWAL(true /* sync */)` (#10185)
Summary: `FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced. The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`. An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB. ``` Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk. ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185 Test Plan: - repro unit test - the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list" Reviewed By: riversand963 Differential Revision: D37200993 Pulled By: ajkr fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f |
2 years ago |
|
Peter Dillinger
|
3d358a7e25 |
Fix handling of accidental truncation of IDENTITY file (#10173)
Summary: A consequence of https://github.com/facebook/rocksdb/issues/9990 was requiring a non-empty DB ID to generate new SST files. But if the DB ID is not tracked in the manifest and the IDENTITY file is somehow truncated to 0 bytes, then an empty DB ID would be assigned, leading to crash. This change ensures a non-empty DB ID is assigned and set in the IDENTITY file. Also, * Some light refactoring to clean up the logic * (I/O efficiency) If the ID is tracked in the manifest and already matches the IDENTITY file, don't needlessly overwrite the file. * (Debugging) Log the DB ID to info log on open, because sometimes IDENTITY can change if DB is moved around (though it would be unusual for info log to be copied/moved without IDENTITY file) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10173 Test Plan: unit tests expanded/updated Reviewed By: ajkr Differential Revision: D37176545 Pulled By: pdillinger fbshipit-source-id: a9b414cd35bfa33de48af322a36c24538d50bef1 |
2 years ago |
|
Changyu Bi
|
9882652b0e |
Verify write batch checksum before WAL (#10114)
Summary: Context: WriteBatch can have key-value checksums when it was created `with protection_bytes_per_key > 0`. This PR added checksum verification for write batches before they are written to WAL. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10114 Test Plan: - Added new unit tests to db_kv_checksum_test.cc: `make check -j32` - benchmark on performance regression: `./db_bench --benchmarks=fillrandom[-X20] -db=/dev/shm/test_rocksdb -write_batch_protection_bytes_per_key=8` - Pre-PR: ` fillrandom [AVG 20 runs] : 198875 (± 3006) ops/sec; 22.0 (± 0.3) MB/sec ` - Post-PR: ` fillrandom [AVG 20 runs] : 196487 (± 2279) ops/sec; 21.7 (± 0.3) MB/sec ` Mean regressed about 1% (198875 -> 196487 ops/sec). Reviewed By: ajkr Differential Revision: D36917464 Pulled By: cbi42 fbshipit-source-id: 29beb74edf65f04b1a890b4f650d873dc7ed790d |
2 years ago |
|
Yanqin Jin
|
1777e5f7e9 |
Snapshots with user-specified timestamps (#9879)
Summary: In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable. It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29. This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps. Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps. In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot` object is created with the last published sequence number of the super-version. You can see that the reader actually has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called, an arbitrarily long period of time may have already elapsed since the last write, which is when the last published sequence number is written. This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will ensure any two snapshots with timestamps should satisfy the following: ``` snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts ``` If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create a snapshot with associated timestamp. Code example ```cpp // Create a timestamped snapshot when committing transaction. txn->SetCommitTimestamp(100); txn->SetSnapshotOnNextOperation(); txn->Commit(); // A wrapper API for convenience Status Transaction::CommitAndTryCreateSnapshot( std::shared_ptr<TransactionNotifier> notifier, TxnTimestamp ts, std::shared_ptr<const Snapshot>* ret); // Create a timestamped snapshot if caller guarantees no concurrent writes std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100); ``` The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp. ```cpp // Return the timestamped snapshot correponding to given timestamp. If ts is // kMaxTxnTimestamp, then we return the latest timestamped snapshot if present. // Othersise, we return the snapshot whose timestamp is equal to `ts`. If no // such snapshot exists, then we return null. std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const; // Return the latest timestamped snapshot if present. std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const; ``` We also provide two additional APIs for stats collection and reporting purposes. ```cpp Status TransactionDB::GetAllTimestampedSnapshots( std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; // Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`. Status TransactionDB::GetTimestampedSnapshots( TxnTimestamp ts_lb, TxnTimestamp ts_ub, std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; ``` To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release timestamped snapshots whose timestamps are older than or equal to a given threshold. ```cpp void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts); ``` Before shutdown, RocksDB will release all timestamped snapshots. Comparison with user-defined timestamp and how they can be combined: User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile mapping between snapshots (sequence numbers) and timestamps. Different internal keys with the same user key but different timestamps will be treated as different by compaction, thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection. In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent). The timestamped snapshot supports the semantics of reading at an exact point in time. Timestamped snapshots can also be used with user-defined timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879 Test Plan: ``` make check TEST_TMPDIR=/dev/shm make crash_test_with_txn ``` Reviewed By: siying Differential Revision: D35783919 Pulled By: riversand963 fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4 |
2 years ago |
|
zczhu
|
b6de139df5 |
Handle "NotSupported" status by default implementation of Close() in … (#10127)
Summary: The default implementation of Close() function in Directory/FSDirectory classes returns `NotSupported` status. However, we don't want operations that worked in older versions to begin failing after upgrading when run on FileSystems that have not implemented Directory::Close() yet. So we require the upper level that calls Close() function should properly handle "NotSupported" status instead of treating it as an error status. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10127 Reviewed By: ajkr Differential Revision: D36971112 Pulled By: littlepig2013 fbshipit-source-id: 100f0e6ad1191e1acc1ba6458c566a11724cf466 |
2 years ago |
|
zczhu
|
3ee6c9baec |
Consolidate manual_compaction_paused_ check (#10070)
Summary: As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`. Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070 Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test). Reviewed By: ajkr Differential Revision: D36949133 Pulled By: littlepig2013 fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821 |
2 years ago |
|
Yu Zhang
|
a101c9de60 |
Return "invalid argument" when read timestamp is too old (#10109)
Summary: With this change, when a given read timestamp is smaller than the column-family's full_history_ts_low, Get(), MultiGet() and iterators APIs will return Status::InValidArgument(). Test plan ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.UpdateFullHistoryTsLow $ make -j24 check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10109 Reviewed By: riversand963 Differential Revision: D36901126 Pulled By: jowlyzhang fbshipit-source-id: 255feb1a66195351f06c1d0e42acb1ff74527f86 |
2 years ago |
|
Zichen Zhu
|
65893ad959 |
Explicitly closing all directory file descriptors (#10049)
Summary: Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run ``` strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing ``` There is one directory file descriptor that is not closed in the strace log. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049 Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent. Reviewed By: ajkr, hx235 Differential Revision: D36722135 Pulled By: littlepig2013 fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff |
2 years ago |
|
Jay Zhuang
|
5864900cf4 |
Get current LogFileNumberSize the same as log_writer (#10086)
Summary: `db_impl.alive_log_files_` is used to track the WAL size in `db_impl.logs_`. Get the `LogFileNumberSize` obj in `alive_log_files_` the same time as `log_writer` to keep them consistent. For this issue, it's not safe to do `deque::reverse_iterator::operator*` and `deque::pop_front()` concurrently, so remove the tail cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10086 Test Plan: ``` # on Windows gtest-parallel ./db_test --gtest_filter=DBTest.FileCreationRandomFailure -r 1000 -w 100 ``` Reviewed By: riversand963 Differential Revision: D36822373 Pulled By: jay-zhuang fbshipit-source-id: 5e738051dfc7bcf6a15d85ba25e6365df6b6a6af |
2 years ago |
|
Akanksha Mahajan
|
d04df2752a |
Persist the new MANIFEST after successfully syncing the new WAL during recovery (#9922)
Summary: In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't flush the data from WAL to L0 for all column families if possible. As a result, not all column families can increase their log_numbers, and min_log_number_to_keep won't change. For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change. If we persist a new MANIFEST with advanced log_numbers for some column families, then during a second crash after persisting the MANIFEST, RocksDB will see some column families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail. As a solution, RocksDB will persist the new MANIFEST after successfully syncing the new WAL. If a future recovery starts from the new MANIFEST, then it means the new WAL is successfully synced. Due to the sentinel empty write batch at the beginning, kPointInTimeRecovery of WAL is guaranteed to go after this point. If future recovery starts from the old MANIFEST, it means the writing the new MANIFEST failed. We won't have the "SST ahead of WAL" error. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful Pull Request resolved: https://github.com/facebook/rocksdb/pull/9922 Test Plan: 1. Update unit tests to fail without this change 2. make crast_test -j Branch with unit test and no fix https://github.com/facebook/rocksdb/pull/9942 to keep track of unit test (without fix) Reviewed By: riversand963 Differential Revision: D36043701 Pulled By: akankshamahajan15 fbshipit-source-id: 5760970db0a0920fb73d3c054a4155733500acd9 |
2 years ago |
|
Yanqin Jin
|
7c8c803938 |
Remove unused variable `single_column_family_mode_` (#10078)
Summary: This variable is actually not being used for anything meaningful, thus remove it. This can make https://github.com/facebook/rocksdb/issues/7516 slightly simpler by reducing the amount of state that must be made lock-free. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10078 Test Plan: make check Reviewed By: ajkr Differential Revision: D36779817 Pulled By: riversand963 fbshipit-source-id: ffb0d9ad6149616917ae5e02bb28102cb90fc406 |
2 years ago |
|
Yu Zhang
|
16bdb1f999 |
Add timestamp support to DBImplReadOnly (#10004)
Summary: This PR adds timestamp support to a read only DB instance opened as `DBImplReadOnly`. A follow up PR will add the same support to `CompactedDBImpl`. With this, read only database has these timestamp related APIs: `ReadOptions.timestamp` : read should return the latest data visible to this specified timestamp `Iterator::timestamp()` : returns the timestamp associated with the key, value `DB:Get(..., std::string* timestamp)` : returns the timestamp associated with the key, value in `timestamp` Test plan (on devserver): ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.ReadOnlyDB* ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10004 Reviewed By: riversand963 Differential Revision: D36434422 Pulled By: jowlyzhang fbshipit-source-id: 5d949e65b1ffb845758000e2b310fdd4aae71cfb |
2 years ago |
|
Jay Zhuang
|
c6d326d3d7 |
Track SST unique id in MANIFEST and verify (#9990)
Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f |
2 years ago |
|
sdong
|
49628c9a83 |
Use std::numeric_limits<> (#9954)
Summary: Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954 Test Plan: See CI Runs. Reviewed By: riversand963 Differential Revision: D36173954 fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0 |
2 years ago |
|
Andrew Kryczka
|
c5d367f472 |
Revert open logic changes in #9634 (#9906)
Summary: Left HISTORY.md and unit tests. Added a new unit test to repro the corruption scenario that this PR fixes, and HISTORY.md line for that. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9906 Reviewed By: riversand963 Differential Revision: D35940093 Pulled By: ajkr fbshipit-source-id: 9816f99e1ce405ba36f316beb4f6378c37c8c86b |
2 years ago |
|
Akanksha Mahajan
|
ae82d91492 |
Remove corrupted WAL files in kPointRecoveryMode with avoid_flush_duing_recovery set true (#9634)
Summary: 1) In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't flush the data from WAL to L0 for all column families if possible. As a result, not all column families can increase their log_numbers, and min_log_number_to_keep won't change. 2) For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change. If we persist a new MANIFEST with advanced log_numbers for some column families, then during a second crash after persisting the MANIFEST, RocksDB will see some column families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail. As a solution, 1. the corrupted WALs whose numbers are larger than the corrupted wal and smaller than the new WAL will be moved to archive folder. 2. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful Pull Request resolved: https://github.com/facebook/rocksdb/pull/9634 Test Plan: 1. Added new unit tests 2. make crast_test -j Reviewed By: riversand963 Differential Revision: D34463666 Pulled By: akankshamahajan15 fbshipit-source-id: e233d3af0ed4e2028ca0cf051e5a334a0fdc9d19 |
2 years ago |
|
Yanqin Jin
|
0ad9ee30ce |
Remove dead code (#9825)
Summary: Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0. This PR removes dead code related to these two removed options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825 Test Plan: make check Reviewed By: akankshamahajan15 Differential Revision: D35517950 Pulled By: riversand963 fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482 |
2 years ago |
|
Yanqin Jin
|
1a1c5bda23 |
Disallow commit-time-batch for write-prepared/write-unprepared txn conditionally (#9794)
Summary: For write-prepared/write-unprepared transactions, GetCommitTimeWriteBatch() can be used only if the transaction is started with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set to true. Otherwise, it is possible that multiple uncommitted versions of the same key exist in the database. During bottommost compaction, RocksDB may set the sequence numbers of both to zero once they become committed, causing output SST file to have two identical internal keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794 Test Plan: make check pay special attention to the following ``` transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/* ``` Reviewed By: lth Differential Revision: D35327214 Pulled By: riversand963 fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f |
2 years ago |
|
Jay Zhuang
|
2c8100e60e |
Fix a race condition when disable and enable manual compaction (#9694)
Summary: In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground manual compaction thread does not have to wait background compaction thread to finish. Which could be a problem that the user re-enable manual compaction with `EnableManualCompaction()`, it may re-enable the BG compaction which supposed be cancelled. This patch makes the FG compaction wait on `manual_compaction_state.done`, which either be set by BG compaction or Unschedule callback. Then when FG manual compaction thread returns, it should not have BG compaction running. So shared_ptr is no longer needed for `manual_compaction_state`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694 Test Plan: a StressTest and unittest Reviewed By: ajkr Differential Revision: D34885472 Pulled By: jay-zhuang fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274 |
3 years ago |
|
Yanqin Jin
|
bbdaf63d0f |
Fix a TSAN-reported bug caused by concurrent accesss to std::deque (#9686)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9686 According to https://www.cplusplus.com/reference/deque/deque/back/, " The container is accessed (neither the const nor the non-const versions modify the container). The last element is potentially accessed or modified by the caller. Concurrently accessing or modifying other elements is safe. " Also according to https://www.cplusplus.com/reference/deque/deque/pop_front/, " The container is modified. The first element is modified. Concurrently accessing or modifying other elements is safe (although see iterator validity above). " In RocksDB, we never pop the last element of `DBImpl::alive_log_files_`. We have been exploiting this fact and the above two properties when ensuring correctness when `DBImpl::alive_log_files_` may be accessed concurrently. Specifically, it can be accessed in the write path when db mutex is released. Sometimes, the log_mute_ is held. It can also be accessed in `FindObsoleteFiles()` when db mutex is always held. It can also be accessed during recovery when db mutex is also held. Given the fact that we never pop the last element of alive_log_files_, we currently do not acquire additional locks when accessing it in `WriteToWAL()` as follows ``` alive_log_files_.back().AddSize(log_entry.size()); ``` This is problematic. Check source code of deque.h ``` back() _GLIBCXX_NOEXCEPT { __glibcxx_requires_nonempty(); ... } pop_front() _GLIBCXX_NOEXCEPT { ... if (this->_M_impl._M_start._M_cur != this->_M_impl._M_start._M_last - 1) { ... ++this->_M_impl._M_start._M_cur; } ... } ``` `back()` will actually call `__glibcxx_requires_nonempty()` first. If `__glibcxx_requires_nonempty()` is enabled and not an empty macro, it will call `empty()` ``` bool empty() { return this->_M_impl._M_finish == this->_M_impl._M_start; } ``` You can see that it will access `this->_M_impl._M_start`, racing with `pop_front()`. Therefore, TSAN will actually catch the bug in this case. To be able to use TSAN on our library and unit tests, we should always coordinate concurrent accesses to STL containers properly. We need to pass information about db mutex and log mutex into `WriteToWAL()`, otherwise it's impossible to know which mutex to acquire inside the function. To fix this, we can catch the tail of `alive_log_files_` by reference, so that we do not have to call `back()` in `WriteToWAL()`. Reviewed By: pdillinger Differential Revision: D34780309 fbshipit-source-id: 1def9821f0c437f2736c6a26445d75890377889b |
3 years ago |
|
Jay Zhuang
|
4dff279b19 |
DisableManualCompaction may fail to cancel an unscheduled task (#9659)
Summary: https://github.com/facebook/rocksdb/issues/9625 didn't change the unschedule condition which was waiting for the background thread to clean-up the compaction. make sure we only unschedule the task when it's scheduled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9659 Reviewed By: ajkr Differential Revision: D34651820 Pulled By: jay-zhuang fbshipit-source-id: 23f42081b15ec8886cd81cbf131b116e0c74dc2f |
3 years ago |
|
Jay Zhuang
|
09b0e8f2c7 |
Fix a timer crash caused by invalid memory management (#9656)
Summary: Timer crash when multiple DB instances doing heavy DB open and close operations concurrently. Which is caused by adding a timer task with smaller timestamp than the current running task. Fix it by moving the getting new task timestamp part within timer mutex protection. And other fixes: - Disallow adding duplicated function name to timer - Fix a minor memory leak in timer when a running task is cancelled Pull Request resolved: https://github.com/facebook/rocksdb/pull/9656 Reviewed By: ajkr Differential Revision: D34626296 Pulled By: jay-zhuang fbshipit-source-id: 6b6d96a5149746bf503546244912a9e41a0c5f6b |
3 years ago |
|
slk
|
95305c44a1 |
Add OpenAndTrimHistory API to support trimming data with specified timestamp (#9410)
Summary: As disscussed in (https://github.com/facebook/rocksdb/issues/9223), Here added a new API named DB::OpenAndTrimHistory, this API will open DB and trim data to the timestamp specofied by **trim_ts** (The data with newer timestamp than specified trim bound will be removed). This API should only be used at a timestamp-enabled db instance recovery. And this PR implemented a new iterator named HistoryTrimmingIterator to support trimming history with a new API named DB::OpenAndTrimHistory. HistoryTrimmingIterator wrapped around the underlying InternalITerator such that keys whose timestamps newer than **trim_ts** should not be returned to the compaction iterator while **trim_ts** is not null. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9410 Reviewed By: ltamasi Differential Revision: D34410207 Pulled By: riversand963 fbshipit-source-id: e54049dc234eccd673244c566b15df58df5a6236 |
3 years ago |
|
Hui Xiao
|
ca0ef54f16 |
Rate-limit automatic WAL flush after each user write (#9607)
Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch]( |
3 years ago |
|
Jay Zhuang
|
db8647969d |
Unschedule manual compaction from thread-pool queue (#9625)
Summary: PR https://github.com/facebook/rocksdb/issues/9557 introduced a race condition between manual compaction foreground thread and background compaction thread. This PR adds the ability to really unschedule manual compaction from thread-pool queue by differentiate tag name for manual compaction and other tasks. Also fix an issue that db `close()` didn't cancel the manual compaction thread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9625 Test Plan: unittest not hang Reviewed By: ajkr Differential Revision: D34410811 Pulled By: jay-zhuang fbshipit-source-id: cb14065eabb8cf1345fa042b5652d4f788c0c40c |
3 years ago |
|
Andrew Kryczka
|
9983eecdfb |
Dedicate cacheline for DB mutex (#9637)
Summary: We found a case of cacheline bouncing due to writers locking/unlocking `mutex_` and readers accessing `block_cache_tracer_`. We discovered it only after the issue was fixed by https://github.com/facebook/rocksdb/issues/9462 shifting the `DBImpl` members such that `mutex_` and `block_cache_tracer_` were naturally placed in separate cachelines in our regression testing setup. This PR forces the cacheline alignment of `mutex_` so we don't accidentally reintroduce the problem. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9637 Reviewed By: riversand963 Differential Revision: D34502233 Pulled By: ajkr fbshipit-source-id: 46aa313b7fe83e80c3de254e332b6fb242434c07 |
3 years ago |
|
Yanqin Jin
|
1cda273dc3 |
Fix a silent data loss for write-committed txn (#9571)
Summary:
The following sequence of events can cause silent data loss for write-committed
transactions.
```
Time thread 1 bg flush
| db->Put("a")
| txn = NewTxn()
| txn->Put("b", "v")
| txn->Prepare() // writes only to 5.log
| db->SwitchMemtable() // memtable 1 has "a"
| // close 5.log,
| // creates 8.log
| trigger flush
| pick memtable 1
| unlock db mutex
| write new sst
| txn->ctwb->Put("gtid", "1") // writes 8.log
| txn->Commit() // writes to 8.log
| // writes to memtable 2
| compute min_log_number_to_keep_2pc, this
| will be 8 (incorrect).
|
| Purge obsolete wals, including 5.log
|
V
```
At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in
memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"},
only the commit marker of txn is in 8.log
The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`.
In the above example, when bg flush thread tries to find obsolete wals, it uses the information
computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()`
depends on three components
- `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit.
- `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed.
- `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data.
The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families
that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is
only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log.
We should return this information via `FindMinPrepLogReferencedByMemTable()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571
Test Plan:
```
./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/*
make check
```
Reviewed By: siying
Differential Revision: D34235236
Pulled By: riversand963
fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
|
3 years ago |
|
Jay Zhuang
|
a0c569ee1d |
Cancel manual compaction in thread-pool queue (#9557)
Summary: Fix `DisableManualCompaction()` has to wait scheduled manual compaction to start the execution to cancel the job. When a manual compaction in thread-pool queue is cancel, set the job is_canceled to true and clean the resource. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9557 Test Plan: added unittest that will hang without the change Reviewed By: ajkr Differential Revision: D34214910 Pulled By: jay-zhuang fbshipit-source-id: 89dbaee78ddf26eb13ce862c2b15f4a098b36a78 |
3 years ago |
|
Yanqin Jin
|
3122cb4358 |
Revise APIs related to user-defined timestamp (#8946)
Summary: ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`. Namely, `WriteOptions` should not include information about "what-to-write", but should just include information about "how-to-write". According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore, this PR removes `WriteOptions::timestamp` for compliance. After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and `SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity made me reconsider doing it in another PR (maybe). For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take extra `timestamp` information when writing to `WriteBatch`es. These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list. Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to `WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps allocated already and multiple timestamps can be updated. The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp size of the default column family. This will be used to allocate space when calling APIs that do not specify a column family handle. Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing some assertions about timestamp to returning Status code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946 Test Plan: make check ./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8 ./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0 Make sure there is no perf regression by running the following ``` ./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom ``` Before this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s ``` After this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s ``` Reviewed By: ltamasi Differential Revision: D33721359 Pulled By: riversand963 fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09 |
3 years ago |
|
Jay Zhuang
|
980b9ff385 |
Add more micro-benchmark tests (#9436)
Summary: * Add more micro-benchmark tests * Expose an API in DBImpl for waiting for compactions (still not visible to the user) * Add argument name for ribbon_bench * remove benchmark run from CI, as it runs too long. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9436 Test Plan: CI Reviewed By: riversand963 Differential Revision: D33777836 Pulled By: jay-zhuang fbshipit-source-id: c05de3bc082cc05b5d019f00b324e774bf4bbd96 |
3 years ago |
|
Yanqin Jin
|
d10c5c08d3 |
Remove iter_start_seqnum and preserve_deletes (#9430)
Summary: According to https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl.cc#L2896:L2911 and https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl_open.cc#L203:L208, we are going to remove `iter_start_seqnum` and `preserve_deletes` starting from RocksDB 7.0 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9430 Test Plan: make check and CI Reviewed By: ajkr Differential Revision: D33753639 Pulled By: riversand963 fbshipit-source-id: c80aab8e8d8fc33e52472fed524ed703d0ffc8b6 |
3 years ago |
|
slk
|
2e5f764294 |
Make IncreaseFullHistoryTsLow to a public API (#9221)
Summary: As (https://github.com/facebook/rocksdb/issues/9210) discussed, the **full_history_ts_low** is a member of CompactRangeOptions currently, which means a CF's fullHistoryTsLow is advanced only when users submit a CompactRange request. However, users may want to advance the fllHistoryTsLow without an immediate compact. This merge make IncreaseFullHistoryTsLow to a public API so users can advance each CF's fullHistoryTsLow seperately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9221 Reviewed By: akankshamahajan15 Differential Revision: D33201106 Pulled By: riversand963 fbshipit-source-id: 9cb1d013ba93260f72e16353e693ffee167b47ee |
3 years ago |
|
Andrew Kryczka
|
538d2365e9 |
Fix race condition in BackupEngineTest.ChangeManifestDuringBackupCreation (#9327)
Summary:
The failure looked like this:
```
utilities/backupable/backupable_db_test.cc:3161: Failure
Value of: db_chroot_env_->FileExists(prev_manifest_path).IsNotFound()
Actual: false
Expected: true
```
The failure could be coerced consistently with the following patch:
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 80410f671..637636791 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2772,6 +2772,8 @@ void DBImpl::BackgroundCallFlush(Env::Priority thread_pri) {
if (job_context.HaveSomethingToClean() ||
job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) {
mutex_.Unlock();
+ bg_cv_.SignalAll();
+ sleep(1);
TEST_SYNC_POINT("DBImpl::BackgroundCallFlush:FilesFound");
// Have to flush the info logs before bg_flush_scheduled_--
// because if bg_flush_scheduled_ becomes 0 and the lock is
```
The cause was a familiar problem, which is manual flush/compaction may
return before files they obsoleted are removed. The solution is just to
wait for "scheduled" work to complete, which includes all phases
including cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9327
Test Plan:
after this PR, even the above patch to coerce the bug cannot
cause the test to fail.
Reviewed By: riversand963
Differential Revision: D33252208
Pulled By: ajkr
fbshipit-source-id: 720a7eaca58c7247d221911fffe3d5e1dbf581e9
|
3 years ago |
|
Peter Dillinger
|
0050a73a4f |
New stable, fixed-length cache keys (#9126)
Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f |
3 years ago |
|
Yanqin Jin
|
bd513fd075 |
Add commit marker with timestamp (#9266)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266 This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing this tag to WAL, thus it is unavailable to users. This is an ongoing effort to add user-defined timestamp support to write-committed transactions. This diff also indicates all column families that may potentially participate in the same transaction must either disable timestamp or have the same timestamp format, since `CommitWithTimestamp` tag is followed by a single byte-array denoting the commit timestamp of the transaction. We will enforce this checking in a future diff. We keep this diff small. Reviewed By: ltamasi Differential Revision: D31721350 fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6 |
3 years ago |
|
Jay Zhuang
|
6cde8d2190 |
Deprecating `iter_start_seqnum` and `preserve_deletes` (#9091)
Summary: `ReadOptions::iter_start_seqnum` and `DBOptions::preserve_deletes` are deprecated, please try using user defined timestamp feature instead. The feature is used to support differential snapshots, but not well maintained (https://github.com/facebook/rocksdb/issues/6837, https://github.com/facebook/rocksdb/issues/8472) and the interface is not user friendly which returns an internal key from the iterator. The user defined timestamp feature is a more flexible feature to support similar usecase, please switch to that if you have such usecase. The deprecated feature will be removed in a future release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9091 Test Plan: check LOG Fix https://github.com/facebook/rocksdb/issues/9090 Reviewed By: ajkr Differential Revision: D32071750 Pulled By: jay-zhuang fbshipit-source-id: b882c4668dd1bf26ce03c4c192f1bba584bf6104 |
3 years ago |
|
Yanqin Jin
|
2035798834 |
Update TransactionUtil::CheckKeyForConflict to also use timestamps (#9162)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9162 Existing TransactionUtil::CheckKeyForConflict() performs only seq-based conflict checking. If user-defined timestamp is enabled, it should perform conflict checking based on timestamps too. Update TransactionUtil::CheckKey-related methods to verify the timestamp of the latest version of a key is smaller than the read timestamp. Note that CheckKeysForConflict() is not updated since it's used only by optimistic transaction, and we do not plan to update it in this upcoming batch of diffs. Existing GetLatestSequenceForKey() returns the sequence of the latest version of a specific user key. Since we support user-defined timestamp, we need to update this method to also return the timestamp (if enabled) of the latest version of the key. This will be needed for snapshot validation. Reviewed By: ltamasi Differential Revision: D31567960 fbshipit-source-id: 2e4a14aed267435a9aa91bc632d2411c01946d44 |
3 years ago |
|
Jay Zhuang
|
29102641dd |
Skip directory fsync for filesystem btrfs (#8903)
Summary: Directory fsync might be expensive on btrfs and it may not be needed. Here are 4 directory fsync cases: 1. creating a new file: dir-fsync is not needed on btrfs, as long as the new file itself is synced. 2. renaming a file: dir-fsync is not needed if the renamed file is synced. So an API `FsyncAfterFileRename(filename, ...)` is provided to sync the file on btrfs. By default, it just calls dir-fsync. 3. deleting files: dir-fsync is forced by set `IOOptions.force_dir_fsync = true` 4. renaming multiple files (like backup and checkpoint): dir-fsync is forced, the same as above. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903 Test Plan: run tests on btrfs and non btrfs Reviewed By: ajkr Differential Revision: D30885059 Pulled By: jay-zhuang fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a |
3 years ago |
|
Jay Zhuang
|
314de7e7de |
Make `DB::Close()` thread-safe (#8970)
Summary: If `DB::Close()` is called in multi-thread env, the resource could be double released, which causes exception or assert. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8970 Test Plan: Test with multi-thread benchmark, with each thread try to close the DB at the end. Reviewed By: pdillinger Differential Revision: D31242042 Pulled By: jay-zhuang fbshipit-source-id: a61276b1b61e07732e375554106946aea86a23eb |
3 years ago |
|
Peter Dillinger
|
3ffb3baa0b |
Add (Live)FileStorageInfo API (#8968)
Summary: New classes FileStorageInfo and LiveFileStorageInfo and 'experimental' function DB::GetLiveFilesStorageInfo, which is intended to largely replace several fragmented DB functions needed to create checkpoints and backups. This function is now used to create checkpoints and backups, because it fixes many (probably not all) of the prior complexities of checkpoint not having atomic access to DB metadata. This also ensures strong functional test coverage of the new API. Specifically, much of the old CheckpointImpl::CreateCustomCheckpoint has been migrated to and updated in DBImpl::GetLiveFilesStorageInfo, with the former now calling the latter. Also, the class FileStorageInfo in metadata.h compatibly replaces BackupFileInfo and serves as a new base class for SstFileMetaData. Some old fields of SstFileMetaData are still provided (for now) but deprecated. Although FileStorageInfo::directory is accurate when using db_paths and/or cf_paths, these have never been supported by Checkpoint nor BackupEngine and still are not. This change does now detect these cases and return NotSupported when appropriate. (More work needed for support.) Somehow this change broke ProgressCallbackDuringBackup, but the progress_callback logic was dubious to begin with because it would call the callback based on copy buffer size, not size actually copied. Logic and test updated to track size actually copied per-thread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968 Test Plan: tests updated. DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl. DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo, including reading the data after DB close. Added CheckpointTest.CheckpointWithDbPath (NotSupported). Reviewed By: siying Differential Revision: D31242045 Pulled By: pdillinger fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0 |
3 years ago |
|
Giuseppe Ottaviano
|
22d4dc5066 |
Fix race in WriteBufferManager (#9009)
Summary: EndWriteStall has a data race: `queue_.empty()` is checked outside of the mutex, so once we enter the critical section another thread may already have cleared the list, and accessing the `front()` is undefined behavior (and causes interesting crashes under high concurrency). This PR fixes the bug, and also rewrites the logic to make it easier to reason about it. It also fixes another subtle bug: if some writers are stalled and `SetBufferSize(0)` is called, which disables the WBM, the writer are not unblocked because of an early `enabled()` check in `EndWriteStall()`. It doesn't significantly change the locking behavior, as before writers won't lock unless entering a stall condition, and `FreeMem` almost always locks if stalling is allowed, but that is inevitable with the current design. Liveness is guaranteed by the fact that if some writes are blocked, eventually all writes will be blocked due to `stall_active_`, and eventually all memory is freed. While at it, do a couple of optimizations: - In `WBMStallInterface::Signal()` signal the CV only after releasing the lock. Signaling under the lock is a common pitfall, as it causes the woken-up thread to immediately go back to sleep because the mutex is still locked by the awaker. - Move all allocations and deallocations outside of the lock. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9009 Test Plan: ``` USE_CLANG=1 make -j64 all check ``` Reviewed By: akankshamahajan15 Differential Revision: D31550668 Pulled By: ot fbshipit-source-id: 5125387c3dc7ecaaa2b8bbc736e58c4156698580 |
3 years ago |
|
mrambacher
|
13ae16c315 |
Cleanup includes in dbformat.h (#8930)
Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d |
3 years ago |
|
Peter Dillinger
|
4750421ece |
Replace most typedef with using= (#8751)
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
|
3 years ago |
|
James Yin
|
7ddc096d7d |
Fix typo in the comment of log_empty_ (#8711)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8711 Reviewed By: riversand963 Differential Revision: D30566761 Pulled By: jay-zhuang fbshipit-source-id: dd4690f5e2af2d263ed75ea1b9ed24692fe81362 |
3 years ago |
|
Peter Dillinger
|
b6269b078a |
Stable cache keys on ingested SST files (#8669)
Summary: Extends https://github.com/facebook/rocksdb/issues/8659 to work for ingested external SST files, even the same file ingested into different DBs sharing a block cache. Note: These new cache keys are currently only enabled when FileSystem does not provide GetUniqueId. For now, they are typically larger, so slightly less efficient. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8669 Test Plan: Extended unit test Reviewed By: zhichao-cao Differential Revision: D30398532 Pulled By: pdillinger fbshipit-source-id: 1f13e2af4b8bfff5741953a69466e9589fbc23c7 |
3 years ago |
|
Merlin Mao
|
f58d276764 |
Make TraceRecord and Replayer public (#8611)
Summary: New public interfaces: `TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h". `Replayer`, available in `rocksdb/utilities/replayer.h`. User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file. Unit tests: - `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes. - `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611 Reviewed By: ajkr Differential Revision: D30266329 Pulled By: autopear fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8 |
3 years ago |
|
longlijian
|
803a40d412 |
Delete legacy code not used any more. (#8508)
Summary: The removed function in this PR, just only have declared and dose not have any reference used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8508 Reviewed By: mrambacher Differential Revision: D29649033 Pulled By: jay-zhuang fbshipit-source-id: df98143b73d6c184a2a60c9f7ea2548a065ee35d |
3 years ago |
|
Baptiste Lemaire
|
837705ad80 |
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary: In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype. In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...). Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge. MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`. The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505 Reviewed By: pdillinger Differential Revision: D29619283 Pulled By: bjlemaire fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95 |
3 years ago |
|
longlijian
|
ac3f3f3719 |
Eliminate compiler complaining, which the return type of the function… (#8498)
Summary: … should be uint64_t. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8498 Reviewed By: jay-zhuang Differential Revision: D29605064 Pulled By: ajkr fbshipit-source-id: e431448ac9d8a37ae83679c4cc5732e29fe49de4 |
3 years ago |
|
Baptiste Lemaire
|
9dc887ece0 |
Memtable "MemPurge" prototype (#8454)
Summary: Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage. The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time . Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested). One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454 Reviewed By: anand1976 Differential Revision: D29433971 Pulled By: bjlemaire fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5 |
3 years ago |