Summary:
Add --benchmarks=updaterandom for read-modify-write workloads. This is different
from --benchmarks=readrandomwriterandom in a few ways. First, an "operation" is the
combined time to do the read & write rather than treating them as two ops. Second,
the same key is used for the read & write.
Change RandomGenerator to support rows larger than 1M. That was using "assert"
to fail and assert is compiled-away when -DNDEBUG is used.
Add more options to db_bench
--duration - sets the number of seconds for tests to run. When not set the
operation count continues to be the limit. This is used by random operation
tests.
--use_snapshot - when set GetSnapshot() is called prior to each random read.
This is to measure the overhead from using snapshots.
--get_approx - when set GetApproximateSizes() is called prior to each random
read. This is to measure the overhead for a query optimizer.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9267
Summary:
This adds the rate_delay_limit_milliseconds option to make the delay
configurable in MakeRoomForWrite when the max compaction score is too high.
This delay is called the Ln slowdown. This change also counts the Ln slowdown
per level to make it possible to see where the stalls occur.
From IO-bound performance testing, the Level N stalls occur:
* with compression -> at the largest uncompressed level. This makes sense
because compaction for compressed levels is much
slower. When Lx is uncompressed and Lx+1 is compressed
then files pile up at Lx because the (Lx,Lx+1)->Lx+1
compaction process is the first to be slowed by
compression.
* without compression -> at level 1
Task ID: #1832108
Blame Rev:
Test Plan:
run with real data, added test
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9045
Summary:
1. the default value for key size is still 16
2. enable the ability to set the key size via command line --key_size=
Test Plan:
build & run db_banch and pass some value via command line.
verify it works correctly.
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8943
Summary:
Use only the counter mechanism. Do away with
incNumFileOpens, incNumFileClose, incNumFileErrors
s/NULL/nullptr/g in db/table_cache.cc
Test Plan: make clean check
Reviewers: dhruba, heyongqiang, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8841
Summary:
* Introduce is histogram in statistics.h
* stop watch to measure time.
* introduce two timers as a poc.
Replaced NULL with nullptr to fight some lint errors
Should be useful for google.
Test Plan:
ran db_bench and check stats.
make all check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8637
Summary:
Previously, if you opened a db with num_levels set lower than
the database, you received the unhelpful message "Corruption:
VersionEdit: new-file entry." Now you get a more verbose message
describing the issue.
Also, fix handling of compression_levels (both the run-over-the-end
issue and the memory management of it).
Lastly, unique_ptr'ify a couple of minor calls.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8151
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
This was a peformance regression caused by https://reviews.facebook.net/D6729.
The default value of max_grandparent_overlap_factor was erroneously
set to 0 in db_bench.
This was causing compactions to create really really small files because the max_grandparent_overlap_factor was erroneously set to zero in the benchmark.
Test Plan: Run --benchmarks=overwrite
Reviewers: heyongqiang, emayanke, sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7797
Summary:
Adds the option --seed to db_bench to specify the base for the per-thread RNG.
When not set each thread uses the same value across runs of db_bench which defeats
IO stress testing.
Adds the option --read_range. When set to a value > 1 an iterator is created and
each query done for the randomread benchmark will do a range scan for that many
rows. When not set or set to 1 the existing behavior (a point lookup) is done.
Fixes a bug where a printf format string was missing.
Test Plan: run db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7749
Summary:
Create a directory "archive" in the DB directory.
During DeleteObsolteFiles move the WAL files (*.log) to the Archive directory,
instead of deleting.
Test Plan: Created a DB using DB_Bench. Reopened it. Checked if files move.
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6975
Summary:
Scripted and removed all trailing spaces and converted all tabs to
spaces.
Also fixed other lint errors.
All lint errors from this point of time should be taken seriously.
Test Plan: make all check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7059
Summary:
The compaction process takes some files from LevelK and
merges it into LevelK+1. The number of files it picks from
LevelK was capped such a way that the total amount of
data picked does not exceed the maxfilesize of that level.
This essentially meant that only one file from LevelK
is picked for a single compaction.
For bulkloads, we would like to take many many file from
LevelK and compact them using a single compaction run.
This patch introduces a option called the 'source_compaction_factor'
(similar to expanded_compaction_factor). It is a multiplier
that is multiplied by the maxfilesize of that level to arrive
at the limit that is used to throttle the number of source
files from LevelK. For bulk loads, set source_compaction_factor
to a very high number so that multiple files from the same
level are picked for compaction in a single compaction.
The default value of source_compaction_factor is 1, so that
we can keep backward compatibilty with existing compaction semantics.
Test Plan: make clean check
Reviewers: emayanke, sheki
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6867
Summary:
This option is needed for fast bulk uploads. The goal is to load
all the data into files in L0 without any interference from
background compactions.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6849
Summary:
The value specified in max_grandparent_overlap_factor is used to
limit the file size in a compaction run. This patch makes it
configurable when using db_bench.
Test Plan: make clean db_bench
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6729
Summary:
The db_bench utility was broken in 1.5.4.fb because of a
signed-unsigned comparision.
The static variable FLAGS_min_level_to_compress was recently
changed from int to 'unsigned in' but it is initilized to a
nagative value -1.
The segfault is of this type:
Program received signal SIGSEGV, Segmentation fault.
Open (this=0x7fffffffdee0) at db/db_bench.cc:939
939 db/db_bench.cc: No such file or directory.
(gdb) where
Test Plan: run db_bench with no options.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6663
Summary: Record BloomFliter hits and drop off reasons during compaction.
Test Plan: Unit tests work.
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6591
Summary:
disable size compaction in ldb reduce_levels, this will avoid compactions rather than the manual comapction,
added --compression=none|snappy|zlib|bzip2 and --file_size= per-file size to ldb reduce_levels command
Test Plan: run ldb
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: sheki, emayanke
Differential Revision: https://reviews.facebook.net/D6597
Summary:
Prototype stat's collection. Diff is a good estimate of what
the final code will look like.
A few assumptions :
* Used a global static instance of the statistics object. Plan to pass
it to each internal function. Static allows metrics only at app
level.
* In the Ticker's do not do any locking. Depend on the mutex at each
function of LevelDB. If we ever remove the mutex, we should change
here too. The other option is use atomic objects anyways as there
won't be any contention as they will be always acquired only by one
thread.
* The counters are dumb, increment through lifecycle. Plan to use ods
etc to get last5min stat etc.
Test Plan:
made changes in db_bench
Ran ./db_bench --statistics=1 --num=10000 --cache_size=5000
This will print the cache hit/miss stats.
Reviewers: dhruba, heyongqiang
Differential Revision: https://reviews.facebook.net/D6441
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
Summary: Leveldb currently uses windowBits=-14 while using zlib compression.(It was earlier 15). This makes the setting configurable. Related changes here: https://reviews.facebook.net/D6105
Test Plan: make all check
Reviewers: dhruba, MarkCallaghan, sheki, heyongqiang
Differential Revision: https://reviews.facebook.net/D6393
Summary:
as subject
Test Plan:
run db_bench and db_test
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6111
Summary:
The leveldb API is enhanced to support different compression algorithms at
different levels.
This adds the option min_level_to_compress to db_bench that specifies
the minimum level for which compression should be done when
compression is enabled. This can be used to disable compression for levels
0 and 1 which are likely to suffer from stalls because of the CPU load
for memtable flushes and (L0,L1) compaction. Level 0 is special as it
gets frequent memtable flushes. Level 1 is special as it frequently
gets all:all file compactions between it and level 0. But all other levels
could be the same. For any level N where N > 1, the rate of sequential
IO for that level should be the same. The last level is the
exception because it might not be full and because files from it are
not read to compact with the next larger level.
The same amount of time will be spent doing compaction at any
level N excluding N=0, 1 or the last level. By this standard all
of those levels should use the same compression. The difference is that
the loss (using more disk space) from a faster compression algorithm
is less significant for N=2 than for N=3. So we might be willing to
trade disk space for faster write rates with no compression
for L0 and L1, snappy for L2, zlib for L3. Using a faster compression
algorithm for the mid levels also allows us to reclaim some cpu
without trading off much loss in disk space overhead.
Also note that little is to be gained by compressing levels 0 and 1. For
a 4-level tree they account for 10% of the data. For a 5-level tree they
account for 1% of the data.
With compression enabled:
* memtable flush rate is ~18MB/second
* (L0,L1) compaction rate is ~30MB/second
With compression enabled but min_level_to_compress=2
* memtable flush rate is ~320MB/second
* (L0,L1) compaction rate is ~560MB/second
This practicaly takes the same code from https://reviews.facebook.net/D6225
but makes the leveldb api more general purpose with a few additional
lines of code.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6261
Summary:
Adds the "MB/sec in" and "MB/sec out" to this line:
Amplification: 1.7 rate, 0.01 GB in, 0.02 GB out, 8.24 MB/sec in, 13.75 MB/sec out
Changes all values to be reported per interval and since test start for this line:
... thread 0: (10000,60000) ops and (19155.6,27307.5) ops/second in (0.522041,2.197198) seconds
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6291
Summary:
Adds a method that returns the score for the next level that most
needs compaction. That method is then used by db_bench to rate limit threads.
Threads are put to sleep at the end of each stats interval until the score
is less than the limit. The limit is set via the --rate_limit=$double option.
The specified value must be > 1.0. Also adds the option --stats_per_interval
to enable additional metrics reported every stats interval.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6243
Summary:
This adds more statistics to be reported by GetProperty("leveldb.stats").
The new stats include time spent waiting on stalls in MakeRoomForWrite.
This also includes the total amplification rate where that is:
(#bytes of sequential IO during compaction) / (#bytes from Put)
This also includes a lot more data for the per-level compaction report.
* Rn(MB) - MB read from level N during compaction between levels N and N+1
* Rnp1(MB) - MB read from level N+1 during compaction between levels N and N+1
* Wnew(MB) - new data written to the level during compaction
* Amplify - ( Write(MB) + Rnp1(MB) ) / Rn(MB)
* Rn - files read from level N during compaction between levels N and N+1
* Rnp1 - files read from level N+1 during compaction between levels N and N+1
* Wnp1 - files written to level N+1 during compaction between levels N and N+1
* NewW - new files written to level N+1 during compaction
* Count - number of compactions done for this level
This is the new output from DB::GetProperty("leveldb.stats"). The old output stopped at Write(MB)
Compactions
Level Files Size(MB) Time(sec) Read(MB) Write(MB) Rn(MB) Rnp1(MB) Wnew(MB) Amplify Read(MB/s) Write(MB/s) Rn Rnp1 Wnp1 NewW Count
-------------------------------------------------------------------------------------------------------------------------------------
0 3 6 33 0 576 0 0 576 -1.0 0.0 1.3 0 0 0 0 290
1 127 242 351 5316 5314 570 4747 567 17.0 12.1 12.1 287 2399 2685 286 32
2 161 328 54 822 824 326 496 328 4.0 1.9 1.9 160 251 411 160 161
Amplification: 22.3 rate, 0.56 GB in, 12.55 GB out
Uptime(secs): 439.8
Stalls(secs): 206.938 level0_slowdown, 0.000 level0_numfiles, 24.129 memtable_compaction
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
(cherry picked from commit ecdeead38f86cc02e754d0032600742c4f02fec8)
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D6153
Summary:
The parameter delete_obsolete_files_period_micros controls the
periodicity of deleting obsolete files. db_bench was reading in
this parameter intoa local variable called 'l' but was incorrectly
using another local variable called 'n' while setting it in the
db.options data structure.
This patch also logs the value of delete_obsolete_files_period_micros
in the LOG file at db startup time.
I am hoping that this will improve the overall write throughput drastically.
Test Plan: run db_bench
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6099
published in https://reviews.facebook.net/D5997.
Summary:
This patch allows compaction to occur in multiple background threads
concurrently.
If a manual compaction is issued, the system falls back to a
single-compaction-thread model. This is done to ensure correctess
and simplicity of code. When the manual compaction is finished,
the system resumes its concurrent-compaction mode automatically.
The updates to the manifest are done via group-commit approach.
Test Plan: run db_bench
Summary:
The method DeleteObsolete files is a very costly methind, especially
when the number of files in a system is large. It makes a list of
all live-files and then scans the directory to compute the diff.
By default, this method is executed after every compaction run.
This patch makes it such that DeleteObsolete files is never
invoked twice within a configured period.
Test Plan: run all unit tests
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6045
Summary: Enhance db_bench to allow setting the number of levels in a database.
Test Plan: run db_bench and look at LOG
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6027
Summary:
We have seen that reading data via the pread call (instead of
mmap) is much faster on Linux 2.6.x kernels. This patch makes
an equivalent option to switch off mmaps for the write path
as well.
db_bench --mmap_write=0 will use write() instead of mmap() to
write data to a file.
This change is backward compatible, the default
option is to continue using mmap for writing to a file.
Test Plan: "make check all"
Differential Revision: https://reviews.facebook.net/D5781
Summary:
The option is zero by default and in that case reporting is unchanged.
By unchanged, the interval at which stats are reported is scaled after each
report and newline is not issued after each report so one line is rewritten.
When non-zero it specifies the constant interval (in operations) at which
statistics are reported and the stats include the rate per interval. This
makes it easier to determine whether QPS changes over the duration of the test.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5817
Summary:
A simple CLI which calles DB->CompactRange()
Can take String key's as range.
Test Plan:
Inserted data into a table.
Waited for a minute, used compact tool on it. File modification time's
changed so Compact did something on the files.
Existing unit tests work.
Reviewers: heyongqiang, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5697
Summary:
as subject. This diff should be good for benchmarking.
will send another diff to make it better in the case the seek compaction is enable.
In that coming diff, will not count a seek if the bloomfilter filters.
Test Plan: build
Reviewers: dhruba, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5481
Summary:
as subject. this can be used for benchmarking.
If we want it for some cases, we can do more changes to make this part of the option.
Test Plan: db_test
Reviewers: dhruba
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5451
Summary:
FLAGS_cache_size is a long, no need to scan %lld into a size_t
for it (which generates a compiler warning)
Test Plan: run db_bench
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5427
Summary:
This adds an option to db_bench to specify the compression algorithm to
use for LevelDB
Test Plan: ran db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5421
Summary:
Ability to switch off filesystem read-aheads. This change is
backward-compatible: the default setting is to allow file
system read-aheads.
Test Plan: run benchmarks
Reviewers: heyongqiang, adsharma
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5391
Summary: Enable db_bench to specify block size.
Test Plan: compile and run
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5373
Summary: If none of reads or writes are specified by user, then pick the FLAGS_NUM as the number of iterations in the ReadRandomWriteRandom test. If either reads or writes are defined, then use their maximum.
Test Plan: run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5217
Summary:
This patch enables the db_bench benchmark to issue both random reads and random writes at the same time. This options can be trigged via
./db_bench --benchmarks=readrandomwriterandom
The default percetage of reads is 90.
One can change the percentage of reads by specifying the --readwritepercent.
./db_bench --benchmarks=readrandomwriterandom=50
This is a feature request from Jeffro asking for leveldb performance with a 90:10 read:write ratio.
Test Plan: run on test machine.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5067
Summary:
The numbers of shards that the block cache is divided into is
configurable. However, if the user specifies that he/she wants
the block cache to be divided into more than 2**20 pieces, then
the system will rey to allocate a huge array of that size) that
could fail.
It is better to limit the sharding of the block cache to an
upper bound. The default sharding is 16 shards (i.e. 2**4)
and the maximum is now 2 million shards (i.e. 2**20).
Also, fixed a bug with the LRUCache where the numShardBits
should be a private member of the LRUCache object rather than
a static variable.
Test Plan:
run db_bench with --cache_numshardbits=64.
Task ID: #
Blame Rev:
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5013
Summary:
Introduce a new method Env->Fsync() that issues fsync (instead of fdatasync).
This is needed for data durability when running on ext3 filesystems.
Added options to the benchmark db_bench to generate performance numbers
with either fsync or fdatasync enabled.
Cleaned up Makefile to build leveldb_shell only when building the thrift
leveldb server.
Test Plan: build and run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4911
Mark Callaghan