Tag:
Branch:
Tree:
d5d8920f2c
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
476 Commits (d5d8920f2cfd06d1803b0976acbe8b564b88b6b1)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Gang Liao
|
c965c9ef65 |
Read blob from blob cache if exists when GetBlob() (#10178)
Summary: There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache. In this task, we added a new abstraction layer `BlobSource` to retrieve blobs from either blob cache or raw blob file. Note: For simplicity, the current PR only includes `GetBlob()`. `MultiGetBlob()` will be included in the next PR. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10178 Reviewed By: ltamasi Differential Revision: D37250507 Pulled By: gangliao fbshipit-source-id: 3fc4a55a0cea955a3147bdc7dba06430e377259b |
2 years ago |
|
Peter Dillinger
|
1aac814578 |
Use optimized folly DistributedMutex in LRUCache when available (#10179)
Summary: folly DistributedMutex is faster than standard mutexes though imposes some static obligations on usage. See https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h for details. Here we use this alternative for our Cache implementations (especially LRUCache) for better locking performance, when RocksDB is compiled with folly. Also added information about which distributed mutex implementation is being used to cache_bench output and to DB LOG. Intended follow-up: * Use DMutex in more places, perhaps improving API to support non-scoped locking * Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently) Credit: Thanks Siying for reminding me about this line of work that was previously left unfinished. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179 Test Plan: for correctness, existing tests. CircleCI config updated. Also Meta-internal buck build updated. For performance, ran simultaneous before & after cache_bench. Out of three comparison runs, the middle improvement to ops/sec was +21%: Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode compiler) ``` Complete in 20.201 s; Rough parallel ops/sec = 1584062 Thread ops/sec = 107176 Operation latency (ns): Count: 32000000 Average: 9257.9421 StdDev: 122412.04 Min: 134 Median: 3623.0493 Max: 56918500 Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63 ``` New: (add USE_FOLLY=1) ``` Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%) Thread ops/sec = 135487 Operation latency (ns): Count: 32000000 Average: 7304.9294 StdDev: 108530.28 Min: 132 Median: 3777.6012 Max: 91030902 Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83 ``` Reviewed By: anand1976 Differential Revision: D37182983 Pulled By: pdillinger fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1 |
2 years ago |
|
Peter Dillinger
|
126c223714 |
Remove deprecated block-based filter (#10184)
Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80 |
2 years ago |
|
James Tucker
|
751d1a3e48 |
mingw: remove no-asynchronous-unwind-tables (#9963)
Summary: This default is generally incompatible with other parts of mingw, and can be applied by outside users as-needed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9963 Reviewed By: akankshamahajan15 Differential Revision: D36302813 Pulled By: ajkr fbshipit-source-id: 9456b41a96bde302bacbc39e092ccecfcb42f34f |
2 years ago |
|
Yanqin Jin
|
1777e5f7e9 |
Snapshots with user-specified timestamps (#9879)
Summary: In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable. It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29. This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps. Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps. In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot` object is created with the last published sequence number of the super-version. You can see that the reader actually has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called, an arbitrarily long period of time may have already elapsed since the last write, which is when the last published sequence number is written. This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will ensure any two snapshots with timestamps should satisfy the following: ``` snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts ``` If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create a snapshot with associated timestamp. Code example ```cpp // Create a timestamped snapshot when committing transaction. txn->SetCommitTimestamp(100); txn->SetSnapshotOnNextOperation(); txn->Commit(); // A wrapper API for convenience Status Transaction::CommitAndTryCreateSnapshot( std::shared_ptr<TransactionNotifier> notifier, TxnTimestamp ts, std::shared_ptr<const Snapshot>* ret); // Create a timestamped snapshot if caller guarantees no concurrent writes std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100); ``` The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp. ```cpp // Return the timestamped snapshot correponding to given timestamp. If ts is // kMaxTxnTimestamp, then we return the latest timestamped snapshot if present. // Othersise, we return the snapshot whose timestamp is equal to `ts`. If no // such snapshot exists, then we return null. std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const; // Return the latest timestamped snapshot if present. std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const; ``` We also provide two additional APIs for stats collection and reporting purposes. ```cpp Status TransactionDB::GetAllTimestampedSnapshots( std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; // Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`. Status TransactionDB::GetTimestampedSnapshots( TxnTimestamp ts_lb, TxnTimestamp ts_ub, std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; ``` To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release timestamped snapshots whose timestamps are older than or equal to a given threshold. ```cpp void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts); ``` Before shutdown, RocksDB will release all timestamped snapshots. Comparison with user-defined timestamp and how they can be combined: User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile mapping between snapshots (sequence numbers) and timestamps. Different internal keys with the same user key but different timestamps will be treated as different by compaction, thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection. In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent). The timestamped snapshot supports the semantics of reading at an exact point in time. Timestamped snapshots can also be used with user-defined timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879 Test Plan: ``` make check TEST_TMPDIR=/dev/shm make crash_test_with_txn ``` Reviewed By: siying Differential Revision: D35783919 Pulled By: riversand963 fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4 |
2 years ago |
|
Levi Tamasi
|
e9c74bc474 |
Add wide column serialization primitives (#9915)
Summary: The patch adds some low-level logic that can be used to serialize/deserialize a sorted vector of wide columns to/from a simple binary searchable string representation. Currently, there is no user-facing API; this will be implemented in subsequent stages. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9915 Test Plan: `make check` Reviewed By: siying Differential Revision: D35978076 Pulled By: ltamasi fbshipit-source-id: 33f5f6628ec3bcd8c8beab363b1978ac047a8788 |
2 years ago |
|
Zeyi (Rice) Fan
|
c1018b7516 |
cmake: add an option to skip thirdparty.inc on Windows (#10110)
Summary: When building RocksDB with getdeps on Windows, `thirdparty.inc` get in the way since `FindXXXX.cmake` are working properly now. This PR adds an option to skip that file when building RocksDB so we can disable it. FB: see [D36905191](https://www.internalfb.com/diff/D36905191). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10110 Reviewed By: siying Differential Revision: D36913882 Pulled By: fanzeyi fbshipit-source-id: 33d36841dc0d4fe87f51e1d9fd2b158a3adab88f |
2 years ago |
|
Andrea Pappacoda
|
a0f391cafc |
build: fix pkg-config file generation (#9953)
Summary: - Instead of hardcoding "lib" and "include" in `libdir` and `includedir`, use the values from [`GNUInstallDirs`](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html). - Use `PROJECT_DESCRIPTION` and `PROJECT_HOMEPAGE_URL` instead of their `CMAKE_` conterparts to fix pkg-config generation when rocksdb is not the top-level project (see [`project()`](https://cmake.org/cmake/help/latest/command/project.html)). - Drop explicit `CMAKE_CURRENT_SOURCE_DIR` and `CMAKE_CURRENT_BINARY_DIR` in [`configure_file()`](https://cmake.org/cmake/help/latest/command/configure_file.html) as that's implied by default (and quite intuitive). See https://github.com/facebook/rocksdb/issues/9945 CC: trynity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9953 Reviewed By: ajkr Differential Revision: D36716373 Pulled By: jay-zhuang fbshipit-source-id: 57840eeb4453099fa1fe861dc03366085dbca704 |
3 years ago |
|
Tom Blamer
|
cb8586003d |
Add plugin header install in CMakeLists.txt (#10025)
Summary: Fixes https://github.com/facebook/rocksdb/issues/9987. - Plugin specific headers can be specified by setting ${PLUGIN_NAME}_HEADERS in ${PLUGIN_NAME}.mk in the plugin directory. - This is supported by the Makefile based build, but was missing from CMakeLists.txt. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10025 Test Plan: - Add a plugin with ${PLUGIN_NAME}_HEADERS set in both ${PLUGIN_NAME}.mk and CMakeLists.txt - Run Makefile based install and CMake based install and verify installed headers match Reviewed By: riversand963 Differential Revision: D36584908 Pulled By: ajkr fbshipit-source-id: 5ea0137205ccbf0d36faacf45d712c5604065bb5 |
3 years ago |
|
Yu Zhang
|
16bdb1f999 |
Add timestamp support to DBImplReadOnly (#10004)
Summary: This PR adds timestamp support to a read only DB instance opened as `DBImplReadOnly`. A follow up PR will add the same support to `CompactedDBImpl`. With this, read only database has these timestamp related APIs: `ReadOptions.timestamp` : read should return the latest data visible to this specified timestamp `Iterator::timestamp()` : returns the timestamp associated with the key, value `DB:Get(..., std::string* timestamp)` : returns the timestamp associated with the key, value in `timestamp` Test plan (on devserver): ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.ReadOnlyDB* ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10004 Reviewed By: riversand963 Differential Revision: D36434422 Pulled By: jowlyzhang fbshipit-source-id: 5d949e65b1ffb845758000e2b310fdd4aae71cfb |
3 years ago |
|
anand76
|
57997ddaaf |
Multi file concurrency in MultiGet using coroutines and async IO (#9968)
Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696 |
3 years ago |
|
Yaroslav Stepanchuk
|
0a43061f8d |
Remove ROCKSDB_SUPPORT_THREAD_LOCAL define because it's a part of C++11 (#10015)
Summary: ROCKSDB_SUPPORT_THREAD_LOCAL definition has been removed. `__thread`(#define) has been replaced with `thread_local`(C++ keyword) across the code base. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10015 Reviewed By: siying Differential Revision: D36485491 Pulled By: pdillinger fbshipit-source-id: 6522d212514ee190b90b4e2750c80c7e34013c78 |
3 years ago |
|
Trynity Mirell
|
e62c23cce4 |
Generate pkg-config file via CMake (#9945)
Summary: Fixes https://github.com/facebook/rocksdb/issues/7934 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9945 Test Plan: Built via Homebrew pointing to my fork/branch: ``` ~/src/github.com/facebook/fbthrift on main ❯ cat ~/.homebrew/opt/rocksdb/lib/pkgconfig/rocksdb.pc took 1h 17m 48s at 04:24:54 pm prefix="/Users/trynity/.homebrew/Cellar/rocksdb/HEAD-968e4dd" exec_prefix="${prefix}" libdir="${prefix}/lib" includedir="${prefix}/include" Name: rocksdb Description: An embeddable persistent key-value store for fast storage URL: https://rocksdb.org/ Version: 7.3.0 Cflags: -I"${includedir}" Libs: -L"${libdir}" -lrocksdb ``` Reviewed By: riversand963 Differential Revision: D36161635 Pulled By: trynity fbshipit-source-id: 0f1a9c30e43797ee65e6696896e06fde0658456e |
3 years ago |
|
Peter Dillinger
|
bb87164db3 |
Fork and simplify LRUCache for developing enhancements (#9917)
Summary: To support a project to prototype and evaluate algorithmic enhancments and alternatives to LRUCache, here I have separated out LRUCache into internal-only "FastLRUCache" and cut it down to essentials, so that details like secondary cache handling and priorities do not interfere with prototyping. These can be re-integrated later as needed, along with refactoring to minimize code duplication (which would slow down prototyping for now). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9917 Test Plan: unit tests updated to ensure basic functionality has (likely) been preserved Reviewed By: anand1976 Differential Revision: D35995554 Pulled By: pdillinger fbshipit-source-id: d67b20b7ada3b5d3bfe56d897a73885894a1d9db |
3 years ago |
|
Peter Dillinger
|
9d0cae7104 |
Eliminate unnecessary (slow) block cache Ref()ing in MultiGet (#9899)
Summary: When MultiGet() determines that multiple query keys can be served by examining the same data block in block cache (one Lookup()), each PinnableSlice referring to data in that data block needs to hold on to the block in cache so that they can be released at arbitrary times by the API user. Historically this is accomplished with extra calls to Ref() on the Handle from Lookup(), with each PinnableSlice cleanup calling Release() on the Handle, but this creates extra contention on the block cache for the extra Ref()s and Release()es, especially because they hit the same cache shard repeatedly. In the case of merge operands (possibly more cases?), the problem was compounded by doing an extra Ref()+eventual Release() for each merge operand for a key reusing a block (which could be the same key!), rather than one Ref() per key. (Note: the non-shared case with `biter` was already one per key.) This change optimizes MultiGet not to rely on these extra, contentious Ref()+Release() calls by instead, in the shared block case, wrapping the cache Release() cleanup in a refcounted object referenced by the PinnableSlices, such that after the last wrapped reference is released, the cache entry is Release()ed. Relaxed atomic refcounts should be much faster than mutex-guarded Ref() and Release(), and much less prone to a performance cliff when MultiGet() does a lot of block sharing. Note that I did not use std::shared_ptr, because that would require an extra indirection object (shared_ptr itself new/delete) in order to associate a ref increment/decrement with a Cleanable cleanup entry. (If I assumed it was the size of two pointers, I could do some hackery to make it work without the extra indirection, but that's too fragile.) Some details: * Fixed (removed) extra block cache tracing entries in cases of cache entry reuse in MultiGet, but it's likely that in some other cases traces are missing (XXX comment inserted) * Moved existing implementations for cleanable.h from iterator.cc to new cleanable.cc * Improved API comments on Cleanable * Added a public SharedCleanablePtr class to cleanable.h in case others could benefit from the same pattern (potentially many Cleanables and/or smart pointers referencing a shared Cleanable) * Add a typedef for MultiGetContext::Mask * Some variable renaming for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899 Test Plan: Added unit tests for SharedCleanablePtr. Greatly enhanced ability of existing tests to detect cache use-after-free. * Release PinnableSlices from MultiGet as they are read rather than in bulk (in db_test_util wrapper). * In ASAN build, default to using a trivially small LRUCache for block_cache so that entries are immediately erased when unreferenced. (Updated two tests that depend on caching.) New ASAN testsuite running time seems OK to me. If I introduce a bug into my implementation where we skip the shared cleanups on block reuse, ASAN detects the bug in `db_basic_test *MultiGet*`. If I remove either of the above testing enhancements, the bug is not detected. Consider for follow-up work: manipulate or randomize ordering of PinnableSlice use and release from MultiGet db_test_util wrapper. But in typical cases, natural ordering gives pretty good functional coverage. Performance test: In the extreme (but possible) case of MultiGetting the same or adjacent keys in a batch, throughput can improve by an order of magnitude. `./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200` Before ops/sec, num=5: 1,384,394 Before ops/sec, num=500: 6,423,720 After ops/sec, num=500: 10,658,794 After ops/sec, num=5: 16,027,257 Also note that previously, with high parallelism, having query keys concentrated in a single block was worse than spreading them out a bit. Now concentrated in a single block is faster than spread out, which is hopefully consistent with natural expectation. Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12): Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec Possibly better, possibly in the noise. Reviewed By: anand1976 Differential Revision: D35907003 Pulled By: pdillinger fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e |
3 years ago |
|
sdong
|
4f9c0fd083 |
Add Aggregation Merge Operator (#9780)
Summary: Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types. See comments of function CreateAggMergeOperator() for actual usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780 Test Plan: Add a unit test to coverage various cases. Reviewed By: ltamasi Differential Revision: D35267444 fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628 |
3 years ago |
|
Peter Dillinger
|
efd035164b |
Meta-internal folly integration with F14FastMap (#9546)
Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94 |
3 years ago |
|
Kinan Dak Albab
|
1eee99fc8c |
Fix usage of USE_RTTI flag in CMakeLists. (#9760)
Summary: By default, rocksdb release compiles with `-fno-rtti`. This causes issues when linking with other code that requires RTTI. Documentation indicate that setting the environment variable `USE_RTTI=1` when compiling rocksdb can override this behavior so that `-fno-rtti` is not used (http://rocksdb.org/blog/2017/09/28/rocksdb-5-8-released.html). However, this environment flag had no effect due to a bug in how `CMakeLists.txt` refers to `USE_RTTI`. This PR fixes this issue. Now, running `USE_RTTI=1 cmake <......>` is correctly recognized by cmake, and causes `ROCKSDB_USE_RTTI `to be defined and `-fno-rtti` not to be issued for release builds. Behavior when USE_RTTI=0 or USE_RTTI is not provided is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9760 Reviewed By: jay-zhuang Differential Revision: D35334552 Pulled By: mrambacher fbshipit-source-id: e405fcac4e14b246642e52bc7e73b04bf143e5b6 |
3 years ago |
|
mrambacher
|
b7db7eae26 |
Plugin Registry (#7949)
Summary: Added a Plugin class to the ObjectRegistry. Enabled compile-time and program-time addition of plugins to the Registry. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7949 Reviewed By: mrambacher Differential Revision: D33517674 Pulled By: pdillinger fbshipit-source-id: c3e3270aab76a489bfa9e85d78cdfca951912557 |
3 years ago |
|
gitbw95
|
f241d082b6 |
Prevent double caching in the compressed secondary cache (#9747)
Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12 |
3 years ago |
|
Peter Dillinger
|
6534c6dea4 |
Fix remaining uses of "backupable" (#9792)
Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329 |
3 years ago |
|
Adam Retter
|
f61df6524a |
Update the version of Visual Studio required (#9765)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9765 Reviewed By: ajkr Differential Revision: D35220757 Pulled By: jay-zhuang fbshipit-source-id: b7749aa9bd04e3c3d7757e5e64921ff422600ec0 |
3 years ago |
|
Andrew Kryczka
|
062396af15 |
Avoid popcnt on Windows when unavailable and in portable builds (#9680)
Summary: Fixes https://github.com/facebook/rocksdb/issues/9560. Only use popcnt intrinsic when HAVE_SSE42 is set. Also avoid setting it based on compiler test in portable builds because such test will pass on MSVC even without proper arch flags (ref: https://devblogs.microsoft.com/oldnewthing/20201026-00/?p=104397). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9680 Test Plan: verified the combinations of -DPORTABLE and -DFORCE_SSE42 produce expected compiler flags on Linux. Verified MSVC build using PORTABLE=1 (in CircleCI) does not set HAVE_SSE42. Reviewed By: pdillinger Differential Revision: D34739033 Pulled By: ajkr fbshipit-source-id: d10456f3392945fc3e59430a1777840f7b60b276 |
3 years ago |
|
Yanqin Jin
|
3b6dc049f7 |
Support user-defined timestamps in write-committed txns (#9629)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43 |
3 years ago |
|
Siddhartha Roychowdhury
|
21345d2823 |
Streaming Compression API for WAL compression. (#9619)
Summary: Implement a streaming compression API (compress/uncompress) to use for WAL compression. The log_writer would use the compress class/API to compress a record before writing it out in chunks. The log_reader would use the uncompress class/API to uncompress the chunks and combine into a single record. Added unit test to verify the API for different sizes/compression types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9619 Test Plan: make -j24 check Reviewed By: anand1976 Differential Revision: D34437346 Pulled By: sidroyc fbshipit-source-id: b180569ad2ddcf3106380f8758b556cc0ad18382 |
3 years ago |
|
Bo Wang
|
f706a9c199 |
Add a secondary cache implementation based on LRUCache 1 (#9518)
Summary: **Summary:** RocksDB uses a block cache to reduce IO and make queries more efficient. The block cache is based on the LRU algorithm (LRUCache) and keeps objects containing uncompressed data, such as Block, ParsedFullFilterBlock etc. It allows the user to configure a second level cache (rocksdb::SecondaryCache) to extend the primary block cache by holding items evicted from it. Some of the major RocksDB users, like MyRocks, use direct IO and would like to use a primary block cache for uncompressed data and a secondary cache for compressed data. The latter allows us to mitigate the loss of the Linux page cache due to direct IO. This PR includes a concrete implementation of rocksdb::SecondaryCache that integrates with compression libraries such as LZ4 and implements an LRU cache to hold compressed blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9518 Test Plan: In this PR, the lru_secondary_cache_test.cc includes the following tests: 1. The unit tests for the secondary cache with either compression or no compression, such as basic tests, fails tests. 2. The integration tests with both primary cache and this secondary cache . **Follow Up:** 1. Statistics (e.g. compression ratio) will be added in another PR. 2. Once this implementation is ready, I will do some shadow testing and benchmarking with UDB to measure the impact. Reviewed By: anand1976 Differential Revision: D34430930 Pulled By: gitbw95 fbshipit-source-id: 218d78b672a2f914856d8a90ff32f2f5b5043ded |
3 years ago |
|
Jay Zhuang
|
d3a2f284d9 |
Add Temperature info in `NewSequentialFile()` (#9499)
Summary: Add Temperature hints information from RocksDB in API `NewSequentialFile()`. backup and checkpoint operations need to open the source files with `NewSequentialFile()`, which will have the temperature hints. Other operations are not covered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9499 Test Plan: Added unittest Reviewed By: pdillinger Differential Revision: D34006115 Pulled By: jay-zhuang fbshipit-source-id: 568b34602b76520e53128672bd07e9d886786a2f |
3 years ago |
|
Jay Zhuang
|
f092f0fa5d |
Add subcompaction event API (#9311)
Summary: Add event callback for subcompaction and adds a sub_job_id to identify it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9311 Reviewed By: ajkr Differential Revision: D33892707 Pulled By: jay-zhuang fbshipit-source-id: 57b5e5e594d61b2112d480c18a79a36751f65a4e |
3 years ago |
|
Andrew Kryczka
|
babe56ddba |
Add rate limiter priority to ReadOptions (#9424)
Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c |
3 years ago |
|
Peter Dillinger
|
e24734f843 |
Use -Wno-invalid-offsetof instead of dangerous offset_of hack (#9563)
Summary: After https://github.com/facebook/rocksdb/issues/9515 added a unique_ptr to Status, we see some warnings-as-error in some internal builds like this: ``` stderr: rocksdb/src/db/compaction/compaction_job.cc:2839:7: error: offset of on non-standard-layout type 'struct CompactionServiceResult' [-Werror,-Winvalid-offsetof] {offsetof(struct CompactionServiceResult, status), ^ ~~~~~~ ``` I see three potential solutions to resolving this: * Expand our use of an idiom that works around the warning (see offset_of functions removed in this change, inspired by https://gist.github.com/graphitemaster/494f21190bb2c63c5516) However, this construction is invoking undefined behavior that assumes consistent layout with no compiler-introduced indirection. A compiler incompatible with our assumptions will likely compile the code and exhibit undefined behavior. * Migrate to something in place of offset, like a function mapping CompactionServiceResult* to Status* (for the `status` field). This might be required in the long term. * **Selected:** Use our new C++17 dependency to use offsetof in a well-defined way when the compiler allows it. From a comment on https://gist.github.com/graphitemaster/494f21190bb2c63c5516: > A final note: in C++17, offsetof is conditionally supported, which > means that you can use it on any type (not just standard layout > types) and the compiler will error if it can't compile it correctly. > That appears to be the best option if you can live with C++17 and > don't need constexpr support. The C++17 semantics are confirmed on https://en.cppreference.com/w/cpp/types/offsetof, so we can suppress the warning as long as we accept that we might run into a compiler that rejects the code, and at that point we will find a solution, such as the more intrusive "migrate" solution above. Although this is currently only showing in our buck build, it will surely show up also with make and cmake, so I have updated those configurations as well. Also in the buck build, -Wno-expansion-to-defined does not appear to be needed anymore (both current compiler configurations) so I removed it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9563 Test Plan: Tried out buck builds with both current compiler configurations Reviewed By: riversand963 Differential Revision: D34220931 Pulled By: pdillinger fbshipit-source-id: d39436008259bd1eaaa87c77be69fb2a5b559e1f |
3 years ago |
|
Peter Dillinger
|
fd3e0f43b3 |
Require C++17 (#9481)
Summary: Drop support for some old compilers by requiring C++17 standard (or higher). See https://github.com/facebook/rocksdb/issues/9388 First modification based on this is to remove some conditional compilation in slice.h (also better for ODR) Also in this PR: * Fix some Makefile formatting that seems to affect ASSERT_STATUS_CHECKED config in some cases * Add c_test to NON_PARALLEL_TEST in Makefile * Fix a clang-analyze reported "potential leak" in lru_cache_test * Better "compatibility" definition of DEFINE_uint32 for old versions of gflags * Fix a linking problem with shared libraries in Makefile (`./random_test: error while loading shared libraries: librocksdb.so.6.29: cannot open shared object file: No such file or directory`) * Always set ROCKSDB_SUPPORT_THREAD_LOCAL and use thread_local (from C++11) * TODO in later PR: clean up that obsolete flag * Fix a cosmetic typo in c.h (https://github.com/facebook/rocksdb/issues/9488) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9481 Test Plan: CircleCI config substantially updated. * Upgrade to latest Ubuntu images for each release * Generally prefer Ubuntu 20, but keep a couple Ubuntu 16 builds with oldest supported compilers, to ensure compatibility * Remove .circleci/cat_ignore_eagain except for Ubuntu 16 builds, because this is to work around a kernel bug that should not affect anything but Ubuntu 16. * Remove designated gcc-9 build, because the default linux build now uses GCC 9 from Ubuntu 20. * Add some `apt-key add` to fix some apt "couldn't be verified" errors * Generally drop SKIP_LINK=1; work-around no longer needed * Generally `add-apt-repository` before `apt-get update` as manual testing indicated the reverse might not work. Travis: * Use gcc-7 by default (remove specific gcc-7 and gcc-4.8 builds) * TODO in later PR: fix s390x "Assembler messages: Error: invalid switch -march=z14" failure AppVeyor: * Completely dropped because we are dropping VS2015 support and CircleCI covers VS >= 2017 Also local testing with old gflags (out of necessity when using ROCKSDB_NO_FBCODE=1). Reviewed By: mrambacher Differential Revision: D33946377 Pulled By: pdillinger fbshipit-source-id: ae077c823905b45370a26c0103ada119459da6c1 |
3 years ago |
|
mrambacher
|
aae3093719 |
Introduce a CountedFileSystem for counting file operations (#9283)
Summary: Added a CountedFileSystem that tracks a number of file operations (opens, closes, deletes, renames, flushes, syncs, fsyncs, reads, writes). This class was based on the ReportFileOpEnv from db_bench. This is a stepping stone PR to be able to change the SpecialEnv into a SpecialFileSystem, where several of the file varieties wish to do operation counting. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9283 Reviewed By: pdillinger Differential Revision: D33062004 Pulled By: mrambacher fbshipit-source-id: d0d297a7fb9c48c06cbf685e5fa755c27193b6f5 |
3 years ago |
|
Peter Dillinger
|
449029f865 |
Remove deprecated ObjectLibrary::Register() (and Regex public API) (#9439)
Summary: Regexes are considered potentially problematic for use in registering RocksDB extensions, so we are removing ObjectLibrary::Register() and the Regex public API it depended on (now unused). In reference to https://github.com/facebook/rocksdb/issues/9389 Why? * The power of Regexes can make it hard to reason about which extension will match what. (The replacement API isn't perfect, but we are at least "holding the line" on patterns we have seen in practice.) * It is easy to make regexes that don't quite mean what you think they mean, such as forgetting that the `.` in `foo.bar` can match any character or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`. * Some regexes and implementations can have disastrously bad performance. This might not be much practical concern for ObjectLibray here, but we don't want to encourage potentially dangerous further use in production code. (Testing code is fine. See TestRegex.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439 Test Plan: CI Reviewed By: mrambacher Differential Revision: D33792342 Pulled By: pdillinger fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec |
3 years ago |
|
Yanqin Jin
|
fa52376117 |
Move RADOS support to separate repo (#9206)
Summary: This PR moves RADOS support from RocksDB repo to a separate repo. The new (temporary?) repo in this PR serves as an example before we finalize the decision on where and who to host RADOS support. At this point, people can start from the example repo and fork. The goal is to include this commit in RocksDB 7.0 release. Reference: https://github.com/ajkr/dedupfs by ajkr Pull Request resolved: https://github.com/facebook/rocksdb/pull/9206 Test Plan: Follow instructions in https://github.com/riversand963/rocksdb-rados-env/blob/main/README.md and build test binary `env_librados_test` and run it. Also, make check Reviewed By: ajkr Differential Revision: D33751690 Pulled By: riversand963 fbshipit-source-id: 30466c62afa9e4619847a48567ed158e62835e35 |
3 years ago |
|
Yanqin Jin
|
50135c1bf3 |
Move HDFS support to separate repo (#9170)
Summary: This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point, people can start from the example repo and fork. Java/JNI is not included yet, and needs to be done later if necessary. The goal is to include this commit in RocksDB 7.0 release. Reference: https://github.com/ajkr/dedupfs by ajkr Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170 Test Plan: Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress. make check Reviewed By: ajkr Differential Revision: D33751662 Pulled By: riversand963 fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f |
3 years ago |
|
Yanqin Jin
|
1a8e9f0e07 |
Use fcntl(F_FULLFSYNC) on OS X (#9356)
Summary:
Closing https://github.com/facebook/rocksdb/issues/5954
fsync/fdatasync on Linux:
```
(fsync/fdatasync) includes writing through or flushing a disk cache if present.
```
However, on OS X and iOS:
```
(fsync) will flush all data from the host to the drive (i.e. the "permanent storage device"),
the drive itself may not physically write the data to the platters for quite some time and it
may be written in an out-of-order sequence.
```
Solution is to use `fcntl(F_FULLFSYNC)` on OS X so that we get the same
persistence guarantee.
According to OSX man page,
```
The F_FULLFSYNC fcntl asks the drive to flush **all** buffered data to permanent storage.
```
This suggests that it will be no faster than `fsync` on Linux, since Linux, according to its man page,
```
writing through or flushing a disk cache if present
```
It means Linux may not flush **all** data from disk cache.
This is similar to bug reports/fixes in:
- golang: https://github.com/golang/go/issues/26650
- leveldb:
|
3 years ago |
|
Kefu Chai
|
cc1d4e3d33 |
gcc-11 and cmake related cleanup (#9286)
Summary:
in hope to get rockdb compiled with GCC-11 without warning
* util/bloom_test: init a variable before using it
to silence the GCC warning like
```
util/bloom_test.cc:1253:31: error: ‘<anonymous>’ may be used uninitialized [-Werror=maybe-uninitialized]
1253 | Slice key_slice{key_bytes, 8};
| ^
...
include/rocksdb/slice.h:41:3: note: by argument 2 of type ‘const char*’ to ‘rocksdb::Slice::Slice(const char*, size_t)’ declared here
41 | Slice(const char* d, size_t n) : data_(d), size_(n) {}
| ^~~~~
util/bloom_test.cc:1249:3: note: ‘<anonymous>’ declared here
1249 | };
| ^
cc1plus: all warnings being treated as errors
```
* cmake: add find_package(uring ...)
find liburing in a more consistent way. also it is the encouraged way for finding a library.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9286
Reviewed By: mrambacher
Differential Revision: D33165241
Pulled By: jay-zhuang
fbshipit-source-id: 9f3487e11b4e40fd8f1c97c8facb24a190e5ce31
|
3 years ago |
|
mrambacher
|
423538a816 |
Make MemoryAllocator into a Customizable class (#8980)
Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76 |
3 years ago |
|
Peter Dillinger
|
0050a73a4f |
New stable, fixed-length cache keys (#9126)
Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f |
3 years ago |
|
Yanqin Jin
|
29954b8b57 |
Add initial CMake support to plugin (#9214)
Summary: Not a CMake expert, and the current CMake build support added by this PR is unlikely the best way of doing it. Sending out the PR to demonstrate it can work. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9214 Test Plan: Will need to update https://github.com/ajkr/dedupfs with CMake build. Also, PR https://github.com/facebook/rocksdb/issues/9170 and PR https://github.com/facebook/rocksdb/issues/9206 both include CMake support for their plugins, and can be used as a proof of concept. Reviewed By: ajkr Differential Revision: D32738273 Pulled By: riversand963 fbshipit-source-id: da87fb4377c716bbbd577a69763b48d22483f845 |
3 years ago |
|
Levi Tamasi
|
dc5de45af8 |
Support readahead during compaction for blob files (#9187)
Summary: The patch adds a new BlobDB configuration option `blob_compaction_readahead_size` that can be used to enable prefetching data from blob files during compaction. This is important when using storage with higher latencies like HDDs or remote filesystems. If enabled, prefetching is used for all cases when blobs are read during compaction, namely garbage collection, compaction filters (when the existing value has to be read from a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187 Test Plan: Ran `make check` and the stress/crash test. Reviewed By: riversand963 Differential Revision: D32565512 Pulled By: ltamasi fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d |
3 years ago |
|
anand76
|
78556c14dd |
Secondary cache error injection (#9002)
Summary: Implement secondary cache error injection in db_stress. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9002 Reviewed By: zhichao-cao Differential Revision: D31874896 Pulled By: anand1976 fbshipit-source-id: 8cf04c061a4a44efa0fe88423d05cade67b85f73 |
3 years ago |
|
Jonathan Albrecht
|
e970248602 |
Add support for building on s390x platform (#8962)
Summary: This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in. There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with? 1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package 2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image Not sure if there is more required for travis. Happy to help in any way I can. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962 Reviewed By: mrambacher Differential Revision: D31802198 Pulled By: pdillinger fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2 |
3 years ago |
|
Peter Dillinger
|
ad5325a736 |
Experimental support for SST unique IDs (#8990)
Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243 |
3 years ago |
|
Zhichao Cao
|
699f45049d |
Introduce a mechanism to dump out blocks from block cache and re-insert to secondary cache (#8912)
Summary: Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB. Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912 Test Plan: add new tests to lru_cache_test and pass make check. Reviewed By: pdillinger Differential Revision: D31452871 Pulled By: zhichao-cao fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48 |
3 years ago |
|
mrambacher
|
7fd68b7c39 |
Make WalFilter, SstPartitionerFactory, FileChecksumGenFactory, and TableProperties Customizable (#8638)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8638 Reviewed By: zhichao-cao Differential Revision: D31024729 Pulled By: mrambacher fbshipit-source-id: 954c04ccab0b8dee64050a27aadf78ed119106c0 |
3 years ago |
|
Peter Dillinger
|
0ef88538c6 |
Improve support for using regexes (#8740)
Summary: * Consolidate use of std::regex for testing to testharness.cc, to minimize Facebook linters constantly flagging uses in non-production code. * Improve syntax and error messages for asserting some string matches a regex in tests. * Add a public Regex wrapper class to encapsulate existing usage in ObjectRegistry. * Remove unnecessary include <regex> * Put warnings that use of Regex in production code could cause bad performance or stack overflow. Intended follow-up work: * Replace std::regex with another underlying implementation like RE2 * Improve ObjectRegistry interface in terms of possibly confusing literal string matching vs. regex and in terms of reporting invalid regex. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8740 Test Plan: tests updated, basic unit test for public Regex, and some manual testing of temporary changes to see example error messages: utilities/backupable/backupable_db_test.cc:917: Failure 000010_1162373755_138626.blob (child.name) does not match regex [0-9]+_[0-9]+_[0-9]+[.]blobHAHAHA (pattern) db/db_basic_test.cc:74: Failure R3SHSBA8C4U0CIMV2ZB0 (sid3) does not match regex [0-9A-Z]{20}HAHAHA Reviewed By: mrambacher Differential Revision: D30706246 Pulled By: pdillinger fbshipit-source-id: ba845e8f563ccad39bdb58f44f04e9da8f78c3fd |
3 years ago |
|
Peter Dillinger
|
13ded69484 |
Built-in support for generating unique IDs, bug fix (#8708)
Summary: Env::GenerateUniqueId() works fine on Windows and on POSIX where /proc/sys/kernel/random/uuid exists. Our other implementation is flawed and easily produces collision in a new multi-threaded test. As we rely more heavily on DB session ID uniqueness, this becomes a serious issue. This change combines several individually suitable entropy sources for reliable generation of random unique IDs, with goal of uniqueness and portability, not cryptographic strength nor maximum speed. Specifically: * Moves code for getting UUIDs from the OS to port::GenerateRfcUuid rather than in Env implementation details. Callers are now told whether the operation fails or succeeds. * Adds an internal API GenerateRawUniqueId for generating high-quality 128-bit unique identifiers, by combining entropy from three "tracks": * Lots of info from default Env like time, process id, and hostname. * std::random_device * port::GenerateRfcUuid (when working) * Built-in implementations of Env::GenerateUniqueId() will now always produce an RFC 4122 UUID string, either from platform-specific API or by converting the output of GenerateRawUniqueId. DB session IDs now use GenerateRawUniqueId while DB IDs (not as critical) try to use port::GenerateRfcUuid but fall back on GenerateRawUniqueId with conversion to an RFC 4122 UUID. GenerateRawUniqueId is declared and defined under env/ rather than util/ or even port/ because of the Env dependency. Likely follow-up: enhance GenerateRawUniqueId to be faster after the first call and to guarantee uniqueness within the lifetime of a single process (imparting the same property onto DB session IDs). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8708 Test Plan: A new mini-stress test in env_test checks the various public and internal APIs for uniqueness, including each track of GenerateRawUniqueId individually. We can't hope to verify anywhere close to 128 bits of entropy, but it can at least detect flaws as bad as the old code. Serial execution of the new tests takes about 350 ms on my machine. Reviewed By: zhichao-cao, mrambacher Differential Revision: D30563780 Pulled By: pdillinger fbshipit-source-id: de4c9ff4b2f581cf784fcedb5f39f16e5185c364 |
3 years ago |
|
Hui Xiao
|
74cfe7db60 |
Refactor WriteBufferManager::CacheRep into CacheReservationManager (#8506)
Summary: Context: To help cap various memory usage by a single limit of the block cache capacity, we charge the memory usage through inserting/releasing dummy entries in the block cache. CacheReservationManager is such a class (non thread-safe) responsible for inserting/removing dummy entries to reserve cache space for memory used by the class user. - Refactored the inner private class CacheRep of WriteBufferManager into public CacheReservationManager class for reusability such as for https://github.com/facebook/rocksdb/pull/8428 - Encapsulated implementation details of cache key generation and dummy entries insertion/release in cache reservation as discussed in https://github.com/facebook/rocksdb/pull/8506#discussion_r666550838 - Consolidated increase/decrease cache reservation into one API - UpdateCacheReservation. - Adjusted the previous dummy entry release algorithm in decreasing cache reservation to be loop-releasing dummy entries to stay symmetric to dummy entry insertion algorithm - Made the previous dummy entry release algorithm in delayed decrease mode more aggressive for better decreasing cache reservation when memory used is less likely to increase back. Previously, the algorithms only release 1 dummy entries when new_mem_used < 3/4 * cache_allocated_size_ and cache_allocated_size_ - kSizeDummyEntry > new_mem_used. Now, the algorithms loop-releases as many dummy entries as possible when new_mem_used < 3/4 * cache_allocated_size_. - Updated WriteBufferManager's test cases to adapt to changes on the release algorithm mentioned above and left comment for some test cases for clarity - Replaced the previous cache key prefix generation (utilizing object address related to the cache client) with one that utilizes Cache->NewID() to prevent cache-key collision among dummy entry clients sharing the same cache. The specific collision we are preventing happens when the object address is reused for a new cache-key prefix while the old cache-key using that same object address in its prefix still exists in the cache. This could happen due to that, under LRU cache policy, there is a possible delay in releasing a cache entry after the cache client object owning that cache entry get deallocated. In this case, the object address related to the cache client object can get reused for other client object to generate a new cache-key prefix. This prefix generation can be made obsolete after Peter's unification of all the code generating cache key, mentioned in https://github.com/facebook/rocksdb/pull/8506#discussion_r667265255 Pull Request resolved: https://github.com/facebook/rocksdb/pull/8506 Test Plan: - Passing the added unit tests cache_reservation_manager_test.cc - Passing existing and adjusted write_buffer_manager_test.cc Reviewed By: ajkr Differential Revision: D29644135 Pulled By: hx235 fbshipit-source-id: 0fc93fbfe4a40bb41be85c314f8f2bafa8b741f7 |
3 years ago |
|
Merlin Mao
|
d10801e983 |
Allow Replayer to report the results of TraceRecords. (#8657)
Summary: `Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.) `Replayer::Replay()` reports the results via a callback function. New interface: `TraceRecordResult` in "rocksdb/trace_record_result.h". `DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657 Reviewed By: ajkr Differential Revision: D30290216 Pulled By: autopear fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6 |
3 years ago |