Summary:
1) In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't
flush the data from WAL to L0 for all column families if possible. As a
result, not all column families can increase their log_numbers, and
min_log_number_to_keep won't change.
2) For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change.
If we persist a new MANIFEST with
advanced log_numbers for some column families, then during a second
crash after persisting the MANIFEST, RocksDB will see some column
families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail.
As a solution,
1. the corrupted WALs whose numbers are larger than the
corrupted wal and smaller than the new WAL will be moved to archive folder.
2. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9634
Test Plan:
1. Added new unit tests
2. make crast_test -j
Reviewed By: riversand963
Differential Revision: D34463666
Pulled By: akankshamahajan15
fbshipit-source-id: e233d3af0ed4e2028ca0cf051e5a334a0fdc9d19
Summary:
The NUM_INDEX_AND_FILTER_BLOCKS_READ_PER_LEVEL, NUM_DATA_BLOCKS_READ_PER_LEVEL, and NUM_SST_READ_PER_LEVEL stats were being recorded only when the last file in a level happened to have hits. They are supposed to be updated for every level. Also, there was some overcounting of GetContextStats. This PR fixes both the problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9583
Test Plan: Update the unit test in db_basic_test
Reviewed By: akankshamahajan15
Differential Revision: D34308044
Pulled By: anand1976
fbshipit-source-id: b3b36020fda26ba91bc6e0e47d52d58f4d7f656e
Summary:
Disallow `immutable_db_opts.use_direct_io_for_flush_and_compaction == true` and
`mutable_db_opts.writable_file_max_buffer_size == 0`, since it causes `WritableFileWriter::Append()`
to loop forever and does not make much sense in direct IO.
This combination of options itself does not make much sense: asking RocksDB to do direct IO but not allowing
RocksDB to allocate a buffer. We should detect this false combination and warn user early, no matter whether
the application is running on a platform that supports direct IO or not. In the case of platform **not** supporting
direct IO, it's ok if the user learns about this and then finds that direct IO is not supported.
One tricky thing: the constructor of `WritableFileWriter` is being used in our unit tests, and it's impossible
to return status code from constructor. Since we do not throw, I put an assertion for now. Fortunately,
the constructor is not exposed to external applications.
Closing https://github.com/facebook/rocksdb/issues/7109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9348
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D33371924
Pulled By: riversand963
fbshipit-source-id: 2a3701ab541cee23bffda8a36cdf37b2d235edfa
Summary:
Closing https://github.com/facebook/rocksdb/issues/5006
Calling `DB::DestroyColumnFamilyHandle(column_family)` with `column_family` being the return value of
`DB::DefaultColumnFamily()` will return `Status::InvalidArgument()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9347
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D33369675
Pulled By: riversand963
fbshipit-source-id: a8266a4daddf2b7a773c2dc7f3eb9a4adfb6b6dd
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
I'm working on a new format_version=6 to support context
checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test
updates to support that change.
Test coverage data and manual inspection agree on dead code in
block_based_table_reader.cc (removed).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240
Test Plan:
tests enhanced to cover more cases etc.
Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible.
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true}
(Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness)
Before w/ wal: 454512
After w/ wal: 444820 (-2.1%)
Before w/o wal: 1004560
After w/o wal: 998897 (-0.6%)
Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case.
This regression will be corrected in a follow-up PR.
Reviewed By: ajkr
Differential Revision: D32813769
Pulled By: pdillinger
fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
If `DB::Close()` is called in multi-thread env, the resource
could be double released, which causes exception or assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8970
Test Plan:
Test with multi-thread benchmark, with each thread try to
close the DB at the end.
Reviewed By: pdillinger
Differential Revision: D31242042
Pulled By: jay-zhuang
fbshipit-source-id: a61276b1b61e07732e375554106946aea86a23eb
Summary:
This allows the wrapper classes to own the wrapped object and eliminates confusion as to ownership. Previously, many classes implemented their own ownership solutions. Fixes https://github.com/facebook/rocksdb/issues/8606
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8618
Reviewed By: pdillinger
Differential Revision: D30136064
Pulled By: mrambacher
fbshipit-source-id: d0bf471df8818dbb1770a86335fe98f761cca193
Summary:
* Consolidate use of std::regex for testing to testharness.cc, to
minimize Facebook linters constantly flagging uses in non-production
code.
* Improve syntax and error messages for asserting some string matches a
regex in tests.
* Add a public Regex wrapper class to encapsulate existing usage in
ObjectRegistry.
* Remove unnecessary include <regex>
* Put warnings that use of Regex in production code could cause bad
performance or stack overflow.
Intended follow-up work:
* Replace std::regex with another underlying implementation like RE2
* Improve ObjectRegistry interface in terms of possibly confusing literal
string matching vs. regex and in terms of reporting invalid regex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8740
Test Plan:
tests updated, basic unit test for public Regex, and some manual
testing of temporary changes to see example error messages:
utilities/backupable/backupable_db_test.cc:917: Failure
000010_1162373755_138626.blob (child.name)
does not match regex
[0-9]+_[0-9]+_[0-9]+[.]blobHAHAHA (pattern)
db/db_basic_test.cc:74: Failure
R3SHSBA8C4U0CIMV2ZB0 (sid3)
does not match regex [0-9A-Z]{20}HAHAHA
Reviewed By: mrambacher
Differential Revision: D30706246
Pulled By: pdillinger
fbshipit-source-id: ba845e8f563ccad39bdb58f44f04e9da8f78c3fd
Summary:
Use DB session ids in SST table properties to make cache keys
stable across DB re-open and copy / move / restore / etc.
These new cache keys are currently only enabled when FileSystem does not
provide GetUniqueId. For now, they are typically larger, so slightly
less efficient.
Relevant to https://github.com/facebook/rocksdb/issues/7405
This change has a minor regression in PersistentCache functionality:
metaindex blocks are no longer cached in PersistentCache. Table properties
blocks already were not but ideally should be. I didn't spent effort to
fix & test these issues because we don't believe PersistentCache is used much
if at all and expect SecondaryCache to replace it. (Though PRs are welcome.)
FIXME: there is more to be fixed for stable cache keys on external SST files
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8659
Test Plan:
new unit test added, which fails when disabling new
functionality
Reviewed By: zhichao-cao
Differential Revision: D30297705
Pulled By: pdillinger
fbshipit-source-id: e8539a5c8802a79340405629870f2e3fb3822d3a
Summary:
`CompareKeyContext::operator()` on the trunk has a bug: when comparing
column family IDs, `lhs` is used for both sides of the comparison. This
results in the `KeyContext`s getting sorted solely based on key, which
in turn means that keys with the same column family do not necessarily
form a single range in the sorted list. This violates an assumption of the
batched `MultiGet` logic, leading to the same column family
showing up multiple times in the list of `MultiGetColumnFamilyData`.
The end result is the code attempting to check out the thread-local
`SuperVersion` for the same CF multiple times, causing an
assertion violation in debug builds and memory corruption/crash in
release builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8633
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D30169182
Pulled By: ltamasi
fbshipit-source-id: a47710652df7e95b14b40fb710924c11a8478023
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache.
Tests:
Results from cache_bench and db_bench don't show any regression due to these changes.
cache_bench results before and after this change -
Command
```./cache_bench -ops_per_thread=10000000 -threads=1```
Before
```Complete in 40.688 s; QPS = 245774```
```Complete in 40.486 s; QPS = 246996```
```Complete in 42.019 s; QPS = 237989```
After
```Complete in 40.672 s; QPS = 245869```
```Complete in 44.622 s; QPS = 224107```
```Complete in 42.445 s; QPS = 235599```
db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 -
Commands
```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true```
```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300```
Before
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found)
```
After
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271
Reviewed By: zhichao-cao
Differential Revision: D28357511
Pulled By: anand1976
fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2
Summary:
This PR does the following:
-> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems.
-> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls
-> Eliminates the public uses of the LegacyFileSystemWrapper.
With this change in place, there are effectively the following patterns of Env:
- "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system.
- Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system
- Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself.
With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction.
Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703
Reviewed By: zhichao-cao
Differential Revision: D25762190
Pulled By: anand1976
fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
Summary:
Previously we only had a debug assertion to check the right generator was being used for verification. However a user hit a problem in production where their factory was creating the wrong generator for some files, leading to checksum mismatches. It would have been easier to debug if we verified in optimized builds that the generator with the proper name is used. This PR adds such verification.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7824
Reviewed By: zhichao-cao
Differential Revision: D25740254
Pulled By: ajkr
fbshipit-source-id: a6231521747605021bad3231484b5d4f99f4044f
Summary:
Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798
Reviewed By: jay-zhuang
Differential Revision: D25680451
Pulled By: pdillinger
fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917
Summary:
RetrieveMultipleBlocks which is used by MultiGet to read data blocks is not updating num_data_read stat in
GetContextStats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7770
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D25538982
Pulled By: akankshamahajan15
fbshipit-source-id: e3daedb035b1be8ab6af6f115cb3793ccc7b1ec6
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
If WAL tracking was enabled, then disabled during reopen, the previously tracked WALs should be removed from MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7757
Test Plan: a new unit test `DBBasicTest.DisableTrackWal` is added.
Reviewed By: jay-zhuang
Differential Revision: D25410508
Pulled By: cheng-chang
fbshipit-source-id: 9d8d9e665066135930a7c1035bb8c2f68bded6a0
Summary:
Consider the case:
1. All column families are flushed, so all WALs become obsolete, but no WAL is removed from disk yet because the removal is asynchronous, a VersionEdit is written to MANIFEST indicating that WALs before a certain WAL number are obsolete, let's say this number is 3;
2. `SyncWAL` is called, so all the on-disk WALs are synced, and if track_and_verify_wal_in_manifest=true, the WALs will be tracked in MANIFEST, let's say the WAL numbers are 1 and 2;
3. DB crashes;
4. During DB recovery, when replaying MANIFEST, we first see that WAL with number < 3 are obsolete, then we see that WAL 1 and 2 are synced, so according to current implementation of `WalSet`, the `WalSet` will be recovered to include WAL 1 and 2;
5. WAL 1 and 2 are asynchronously deleted from disk, then the WAL verification algorithm fails with `Corruption: missing WAL`.
The above case is reproduced in a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal`.
The fix is to maintain the upper bound of the obsolete WAL numbers, any WAL with number less than the maintained number is considered to be obsolete, so shouldn't be tracked even if they are later synced. The number is maintained in `WalSet`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7725
Test Plan:
1. a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal` is added.
2. run `make crash_test` on devserver.
Reviewed By: riversand963
Differential Revision: D25238914
Pulled By: cheng-chang
fbshipit-source-id: f5dccd57c3d89f19565ec5731f2d42f06d272b72
Summary:
In db_basic_test.cc, there are two tests that rely on the underlying
system's `LockFile` support to function correctly:
DBBasicTest.OpenWhenOpen and DBBasicTest.CheckLock. In both tests,
re-opening a db using `DB::Open` is expected to fail because the second
open cannot lock the LOCK file. Some distributed file systems, e.g. HDFS
do not support the POSIX-style file lock. Therefore, these unit tests will cause
assertion failure and the second `Open` will create a db instance.
Currently, these db instances are not closed after the assertion
failure. Since these db instances are registered with some process-wide, static
data structures, e.g. `PeriodicWorkScheduler::Default()`, they can still be
accessed after the unit tests. However, the `Env` object created for this db
instance is destroyed when the test finishes in `~DBTestBase()`. Consequently,
it causes illegal memory access.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7682
Test Plan:
Run the following on a distrubited file system:
```
make check
```
Reviewed By: anand1976
Differential Revision: D25004215
Pulled By: riversand963
fbshipit-source-id: f4327d7716c0e72b13bb43737ec9a5d156da4d52
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
Existing API `VerifyChecksum()` allows application to verify sst files' block checksums.
Since whole file, user-specified checksum is tracked in MANIFEST, we can expose a new
API to verify sst files' file checksums.
```
// Compute table file checksums if applicable and compare with MANIFEST.
// Returns OK if no file has mismatching whole-file checksum.
Status DB::VerifyFileChecksums(const ReadOptions& /*read_options*/);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7578
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24436783
Pulled By: riversand963
fbshipit-source-id: 52b51519b842f2b3c4e3351998a97c86cbec85b3
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
DBBasicTest.CompactBetweenSnapshots can time-out in some slow-I/O hosts. Parameterize it so that single test runs shorter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7301
Test Plan: Run the test and see see different runs are of different configerations in a hacky way.
Reviewed By: ltamasi
Differential Revision: D23277733
fbshipit-source-id: 1f717b4131322d175abf9e211131fe7e9b1ef758
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Introduce io_timeout in ReadOptions and enabled deadline/io_timeout for
Iterators.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7161
Test Plan: New unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22687352
Pulled By: anand1976
fbshipit-source-id: 67bbb0e6d7ae80b256589244468494292538c6ec
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.
This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210
Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.
Reviewed By: anand1976
Differential Revision: D22861323
Pulled By: ajkr
fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Akanksha Mahajan