Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge.
**Context:**
Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`.
The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option.
**Summary:**
- Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction:
- hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance),
- banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`),
- final filter (i.e, `mutable_buf`'s size).
- Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table.
- Added option fo run `filter_bench` with this memory reservation feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073
Test Plan:
- Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory`
- To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally
- Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter
- Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below:
- FastLocalBloom
- baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`:
- **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0)
- Ribbon128
- baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `:
- **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0)
- And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console.
Reviewed By: pdillinger
Differential Revision: D31991348
Pulled By: hx235
fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
Summary:
`pthread_setname_np()` fails on attempts to assign oversized names like
"rocksdb:bottom10", which resulted in some thread name updates being
lost. We do not need the ID suffix so I removed it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9165
Test Plan:
```
$ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -max_background_flushes=123 -max_background_compactions=456 -num_bottom_pri_threads=789 -duration=60
```
While above is running:
```
$ ps -o 'comm' -Lp `pidof db_bench` | grep '^rocksdb:' | sort | uniq -c
789 rocksdb:bottom
123 rocksdb:high
456 rocksdb:low
```
Reviewed By: pdillinger
Differential Revision: D32415077
Pulled By: ajkr
fbshipit-source-id: a0e013101e26a78bc5eca73509293ef4bf22254f
Summary:
Add the 3 read bytes counter to the Statistic, which will be used by storage tiering and get the information for files with different temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9123
Test Plan: added new testing cases.
Reviewed By: siying
Differential Revision: D32154745
Pulled By: zhichao-cao
fbshipit-source-id: b7905d6dae469a72428742364ec07b634b6f15da
Summary:
We have three layers of block cache that often use the same key
but map to different physical data:
* BlockBasedTableOptions::block_cache
* BlockBasedTableOptions::block_cache_compressed
* BlockBasedTableOptions::persistent_cache
If any two of these happen to share an underlying implementation and key
space (insertion into one shows up in another), then memory safety is
broken. The simplest case is block_cache == block_cache_compressed.
(Credit mrambacher for asking about this case in a review.)
With this change, we explicitly check for overlap and preemptively and
safely fail with a Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9172
Test Plan: test added. Crashes without new check
Reviewed By: anand1976
Differential Revision: D32465659
Pulled By: pdillinger
fbshipit-source-id: 3876b45b6dce6167e5a7a642725ddc86b96f8e40
Summary:
**Context:**
Some existing internal calls of `GenericRateLimiter::Request()` in backupable_db.cc and newly added internal calls in https://github.com/facebook/rocksdb/pull/8722/ do not make sure `bytes <= GetSingleBurstBytes()` as required by rate_limiter https://github.com/facebook/rocksdb/blob/master/include/rocksdb/rate_limiter.h#L47.
**Impacts of this bug include:**
(1) In debug build, when `GenericRateLimiter::Request()` requests bytes greater than `GenericRateLimiter:: kMinRefillBytesPerPeriod = 100` byte, process will crash due to assertion failure. See https://github.com/facebook/rocksdb/pull/9063#discussion_r737034133 and for possible scenario
(2) In production build, although there will not be the above crash due to disabled assertion, the bug can lead to a request of small bytes being blocked for a long time by a request of same priority with insanely large bytes from a different thread. See updated https://github.com/facebook/rocksdb/wiki/Rate-Limiter ("Notice that although....the maximum bytes that can be granted in a single request have to be bounded...") for more info.
There is an on-going effort to move rate-limiting to file wrapper level so rate limiting in `BackupEngine` and this PR might be made obsolete in the future.
**Summary:**
- Implemented loop-calling `GenericRateLimiter::Request()` with `bytes <= GetSingleBurstBytes()` as a static private helper function `BackupEngineImpl::LoopRateLimitRequestHelper`
-- Considering make this a util function in `RateLimiter` later or do something with `RateLimiter::RequestToken()`
- Replaced buggy internal callers with this helper function wherever requested byte is not pre-limited by `GetSingleBurstBytes()`
- Removed the minimum refill bytes per period enforced by `GenericRateLimiter` since it is useless and prevents testing `GenericRateLimiter` for extreme case with small refill bytes per period.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9063
Test Plan:
- Added a new test that failed the assertion before this change and now passes
- It exposed bugs in [the write during creation in `CopyOrCreateFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2034-L2043)), [the read of table properties in `GetFileDbIdentities()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2372-L2378)), [some read of metadata in `BackupMeta::LoadFromFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2726))
- Passing Existing tests
Reviewed By: ajkr
Differential Revision: D31824535
Pulled By: hx235
fbshipit-source-id: d2b3dea7a64e2a4b1e6a59fca322f0800a4fcbcc
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9162
Existing TransactionUtil::CheckKeyForConflict() performs only seq-based
conflict checking. If user-defined timestamp is enabled, it should perform
conflict checking based on timestamps too.
Update TransactionUtil::CheckKey-related methods to verify the timestamp of the
latest version of a key is smaller than the read timestamp. Note that
CheckKeysForConflict() is not updated since it's used only by optimistic
transaction, and we do not plan to update it in this upcoming batch of diffs.
Existing GetLatestSequenceForKey() returns the sequence of the latest
version of a specific user key. Since we support user-defined timestamp, we
need to update this method to also return the timestamp (if enabled) of the
latest version of the key. This will be needed for snapshot validation.
Reviewed By: ltamasi
Differential Revision: D31567960
fbshipit-source-id: 2e4a14aed267435a9aa91bc632d2411c01946d44
Summary:
This makes it easier to debug with tools like `ps`. The change only
applies to builds with glibc 2.30+ and _GNU_SOURCE extensions enabled.
We could adopt it in more cases by using the syscall but this is enough
for our build.
Replaces https://github.com/facebook/rocksdb/issues/2973.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9164
Test Plan:
- ran some benchmarks and correlated logged thread IDs with those shown by `ps -L`.
- verified no noticeable regression in throughput for log heavy (more than 700k log lines and over 5k / second) scenario.
Benchmark command:
```
$ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom -compression_type=none -max_bytes_for_level_multiplier=2 -write_buffer_size=262144 -num_levels=7 -max_bytes_for_level_base=2097152 -target_file_size_base=524288 -level_compaction_dynamic_level_bytes=true -max_background_jobs=12 -num=20000000
```
Results before: 15.9MB/s, 15.8MB/s, 16.0MB/s
Results after: 16.3MB/s, 16.3MB/s, 15.8MB/s
- Rely on CI to test the fallback behavior
Reviewed By: riversand963
Differential Revision: D32399660
Pulled By: ajkr
fbshipit-source-id: c24d44fdf7782faa616ef0a0964eaca3539d9c24
Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
For multiple versions (ts + seq) of the same user key, if they cross the boundary of `full_history_ts_low_`,
we should retain the version that is visible to the `full_history_ts_low_`. Namely, we keep the internal key
with the largest timestamp smaller than `full_history_ts_low`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9116
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32261514
Pulled By: riversand963
fbshipit-source-id: e10f47c254c04c05261440051e4f50cb7d95474e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9105
The user contract of SingleDelete is that: a SingleDelete can only be issued to
a key that exists and has NOT been updated. For example, application can insert
one key `key`, and uses a SingleDelete to delete it in the future. The `key`
cannot be updated or removed using Delete.
In reality, especially when write-prepared transaction is being used, things
can get tricky. For example, a prepared transaction already writes `key` to the
memtable after a successful Prepare(). Afterwards, should the transaction
rollback, it will insert a Delete into the memtable to cancel out the prior
Put. Consider the following sequence of operations.
```
// operation sequence 1
Begin txn
Put(key)
Prepare()
Flush()
Rollback txn
Flush()
```
There will be two SSTs resulting from above. One of the contains a PUT, while
the second one contains a Delete. It is also known that releasing a snapshot
can lead to an L0 containing only a SD for a particular key. Consider the
following operations following the above block.
```
// operation sequence 2
db->Put(key)
db->SingleDelete(key)
Flush()
```
The operation sequence 2 can result in an L0 with only the SD.
Should there be a snapshot for conflict checking created before operation
sequence 1, then an attempt to compact the db may hit the assertion failure
below, because ikey_.type is Delete (from a rollback).
```
else if (clear_and_output_next_key_) {
assert(ikey_.type == kTypeValue || ikey_.type == kTypeBlobIndex);
}
```
To fix the assertion failure, we can skip the SingleDelete if we detect an
earlier Delete in the same snapshot interval.
Reviewed By: ltamasi
Differential Revision: D32056848
fbshipit-source-id: 23620a91e28562d91c45cf7e95f414b54b729748
Summary:
Note: This PR is the 1st part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073).
Context:
Previously, the payload (i.e, filter data) within `BlockBasedTableBuilder::Rep::FilterBlockBuilder` object is not deallocated until `BlockBasedTableBuilder` is deallocated, despite it is no longer useful after its related `filter_content` being written.
- Transferred the payload (i.e, the filter data) out of `BlockBasedTableBuilder::Rep::FilterBlockBuilder` object
- For PartitionedFilter:
- Unified `filters` and `filter_gc` lists into one `std::deque<FilterEntry> filters` by adding a new field `last_filter_entry_key` and storing the `std::unique_ptr filter_data` with the `Slice filter` in the same entry
- Reset `last_filter_data` in the case where `filters` is empty, which should be as by then we would've finish using all the `Slice filter`
- Deallocated the payload by going out of scope as soon as we're done with using the `filter_content` associated with the payload
- This is an internal interface change at the level of `FilterBlockBuilder::Finish()`, which leads to touching the inherited interface in `BlockBasedFilterBlockBuilder`. But for that, the payload transferring is ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9070
Test Plan: - The main focus is to catch segment fault error during `FilterBlockBuilder::Finish()` and `BlockBasedTableBuilder::Finish()` and interface mismatch. Relying on existing CI tests is enough as `assert(false)` was temporarily added to verify the new logic of transferring ownership indeed run
Reviewed By: pdillinger
Differential Revision: D31884933
Pulled By: hx235
fbshipit-source-id: f73ecfbea13788d4fc058013ace27230110b52f4
Summary:
Context:
Surprisingly, there isn't any sanitization against negative `int64_t bytes` in `GenericRateLimiter::Request(int64_t bytes, const Env::IOPriority pri, Statistics* stats)`. A negative `bytes` can be passed in and incorrectly increases `available_bytes_` by subtracting the negative `bytes` from `available_bytes_`, such as [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L138) and [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L283), which are incorrect behaviors.
- Sanitized negative request bytes by rounding it up to 0
- Added notes to public and internal API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9112
Test Plan: - Rely on existing tests
Reviewed By: ajkr
Differential Revision: D32085364
Pulled By: hx235
fbshipit-source-id: b1b6066b2dd5ffc7bcbfb07069ca65a33578251b
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9060
RocksDB bottommost level compaction may zero out an internal key's sequence if
the key's sequence is in the earliest_snapshot.
In write-prepared transaction, checking the visibility of a certain sequence in
a specific released snapshot may return a "snapshot released" result.
Therefore, it is possible, after a certain sequence of events, a PUT has its
sequence zeroed out, but a subsequent SingleDelete of the same key will still
be output with its original sequence. This violates the ascending order of
keys and leads to incorrect result.
The solution is to use an extra variable `last_key_seq_zeroed_` to track the
information about visibility in earliest snapshot. With this variable, we can
know for sure that a SingleDelete is in the earliest snapshot even if the said
snapshot is released during compaction before processing the SD.
Reviewed By: ltamasi
Differential Revision: D31813016
fbshipit-source-id: d8cff59d6f34e0bdf282614034aaea99be9174e1
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
EventListener::OnTableFileCreated was previously called with OK
status and file_size==0 in cases of no SST file contents written
(because there was no content to add) and the empty file deleted before
calling the listener. This could lead to a stress test assertion failure
added in https://github.com/facebook/rocksdb/issues/9054.
This changes the status to Aborted, to align with the API doc:
"... if the file is successfully created. Now it will also be called on
failure case. User can check info.status to see if it succeeded or not."
For internal purposes, this case is considered "success" but for
listener purposes, no SST file is (successfully) created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9118
Test Plan: test case added + existing db_stress
Reviewed By: ajkr, riversand963
Differential Revision: D32120232
Pulled By: pdillinger
fbshipit-source-id: a804e2e0a52598018d3b182da97804d402ffcdfa
Summary:
* Clarify that RocksDB is not exception safe on many of our callback
and extension interfaces
* Clarify FSRandomAccessFile::MultiRead implementations must accept
non-sorted inputs (see https://github.com/facebook/rocksdb/issues/8953)
* Clarify ConcurrentTaskLimiter and SstFileManager are not (currently)
extensible interfaces
* Mark WriteBufferManager as `final`, so it is then clearly not a
callback interface, even though it smells like one
* Clarify TablePropertiesCollector Status returns are mostly ignored
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9080
Test Plan: comments only (except WriteBufferManager final)
Reviewed By: ajkr
Differential Revision: D31968782
Pulled By: pdillinger
fbshipit-source-id: 11b648ce3ce3c5e5bdc02d2eafc7ea4b864bd1d2
Summary:
Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles.
When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed.
In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749
Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end.
Reviewed By: jay-zhuang
Differential Revision: D30735261
fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
Summary:
currently histogram `NUM_FILES_IN_SINGLE_COMPACTION` just counted files in first level of compaction input, this fix counts files in all levels of compaction input.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9026
Reviewed By: ajkr
Differential Revision: D31668241
Pulled By: jay-zhuang
fbshipit-source-id: c02f6c4a5df9fbf0b7510036594811152e8738af
Summary:
This PR fix wrong ticker `WRITE_WITH_WAL`.
`RecordTick(WRITE_WITH_WAL)` will be called later in `WriteToWAL` and `ConcurrentWriteToWAL`.
Fixes:
1. Delete these two extra `RecordTick(WRITE_WITH_WAL)`
2. Fix corresponding test case
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9064
Reviewed By: ajkr
Differential Revision: D31944459
Pulled By: riversand963
fbshipit-source-id: f1aa8d2a4320456bc357bc5b0902032f7dcad086
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9061
In write-prepared txn, checking a sequence's visibility in a released (old)
snapshot may return "Snapshot released". Suppose we have two snapshots:
```
earliest_snap < earliest_write_conflict_snap
```
If we release `earliest_write_conflict_snap` but keep `earliest_snap` during
bottommost level compaction, then it is possible that certain sequence of
events can lead to a PUT being seq-zeroed followed by a SingleDelete of the
same key. This violates the ascending order of keys, and will cause data
inconsistency.
Reviewed By: ltamasi
Differential Revision: D31813017
fbshipit-source-id: dc68ba2541d1228489b93cf3edda5f37ed06f285
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
The bug can impact the following scenario. There must be two `CompactRange()`s, call them A and B. Compaction A must have `change_level=true`. Compactions A and B must run in parallel, and new data must be added while they run as well.
Now, on to the details of the race condition. Compaction A must reach the refitting phase while B's next step is to trivial move new data (i.e., data that has been inserted behind A) down to the same level that A's refit targets (`CompactRangeOptions::target_level`). B must be unregistered (i.e., has not yet called `AddManualCompaction()` for the current `RunManualCompaction()`) while A invokes `DisableManualCompaction()`s to prepare for refitting. In the old code, B could still proceed to register a manual compaction, while A had disabled manual compaction.
The next part of the race condition is B picks and schedules a trivial move while A has released the lock in refitting phase in order to persist the LSM state change (i.e., the log phase of `LogAndApply()`). That way, B does not see the refitted data when picking a trivial-move compaction. So it is susceptible to picking one that overlaps.
Finally, B executes the picked trivial-move compaction. Trivial-move compactions are special in that they never check whether manual compaction is disabled. So the picked compaction causing overlap ends up being applied, leading to LSM corruption if `force_consistency_checks=false`, or entering read-only mode with `Status::Corruption` if `force_consistency_checks=true` (the default).
The fix is just to prevent B from registering itself in `RunManualCompaction()` while manual compactions are disabled, consequently preventing any trivial move or other compaction from being picked/scheduled.
Thanks to siying for finding the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9077
Test Plan: The test does not go all the way in exposing the bug because it requires a compaction to be picked/scheduled while logging LSM state change for RefitLevel(). But the fix is to make such a compaction not picked/scheduled in the first place, so any repro of that scenario would end up hanging RefitLevel() logging. So instead I just verified no such compaction is registered in the scenario where `RefitLevel()` disables manual compactions.
Reviewed By: siying
Differential Revision: D31921908
Pulled By: ajkr
fbshipit-source-id: 9bb5d0e847ad428211227f40830c685c209fbecb
Summary:
In atomic flush, concurrent background flush threads will commit to the MANIFEST
one by one, in the order of the IDs of their picked memtables for all included column
families. Each time, a background flush thread decides whether to wait based on two
criteria:
- Is db stopped? If so, don't wait.
- Am I the one to commit the currently earliest memtable? If so, don't wait and ready to go.
When atomic flush was implemented, error writing to or syncing the MANIFEST would
cause the db to be stopped. Therefore, this background thread does not have to check
for the background error while waiting. If there has been such an error, `DBStopped()`
would have been true, and this thread will **not** wait forever.
After we improved error handling, RocksDB may map an IOError while writing to MANIFEST
to a soft error, if there is no WAL. This requires the background threads to check for
background error while waiting. Otherwise, a background flush thread may wait forever.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9034
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D31639225
Pulled By: riversand963
fbshipit-source-id: e9ab07c4d8f2eade238adeefe3e42dd9a5a3ebbd
Summary:
This PR supports querying `GetMapProperty()` with "rocksdb.dbstats" to get the DB-level stats in a map format. It only reports cumulative stats over the DB lifetime and, as such, does not update the baseline for interval stats. Like other map properties, the string keys are not (yet) exposed in the public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9057
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D31781495
Pulled By: ajkr
fbshipit-source-id: 6f77d3aee8b4b1a015061b8c260a123859ceaf9b
Summary:
This commit introduces incremental compaction in univeral style for space amplification. This follows the first improvement mentioned in https://rocksdb.org/blog/2021/04/12/universal-improvements.html . The implemention simply picks up files about size of max_compaction_bytes to compact and execute if the penalty is not too big. More optimizations can be done in the future, e.g. prioritizing between this compaction and other types. But for now, the feature is supposed to be functional and can often reduce frequency of full compactions, although it can introduce penalty.
In order to add cut files more efficiently so that more files from upper levels can be included, SST file cutting threshold (for current file + overlapping parent level files) is set to 1.5X of target file size. A 2MB target file size will generate files like this: https://gist.github.com/siying/29d2676fba417404f3c95e6c013c7de8 Number of files indeed increases but it is not out of control.
Two set of write benchmarks are run:
1. For ingestion rate limited scenario, we can see full compaction is mostly eliminated: https://gist.github.com/siying/959bc1186066906831cf4c808d6e0a19 . The write amp increased from 7.7 to 9.4, as expected. After applying file cutting, the number is improved to 8.9. In another benchmark, the write amp is even better with the incremental approach: https://gist.github.com/siying/d1c16c286d7c59c4d7bba718ca198163
2. For ingestion rate unlimited scenario, incremental compaction turns out to be too expensive most of the time and is not executed, as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8655
Test Plan: Add unit tests to the functionality.
Reviewed By: ajkr
Differential Revision: D31787034
fbshipit-source-id: ce813e63b15a61d5a56e97bf8902a1b28e011beb
Summary:
Currently, if Secondary Cache is provided to the lru cache, it is used by default. We add CacheTier to advanced_options.h to describe the cache tier we used. Add a `lowest_used_cache_tier` option to `DBOptions` (immutable) and pass it to BlockBasedTableReader to decide if secondary cache will be used or not. By default it is `CacheTier::kNonVolatileTier`, which means, we always use both block cache (kVolatileTier) and secondary cache (kNonVolatileTier). By set it to `CacheTier::kVolatileTier`, the DB will not use the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9050
Test Plan: added new tests
Reviewed By: anand1976
Differential Revision: D31744769
Pulled By: zhichao-cao
fbshipit-source-id: a0575ebd23e1c6dfcfc2b4c8578764e73b15bce6
Summary:
... by bypassing tracking of last_key in BlockBuilder when
last_key is already known (for BlockBasedTableBuilder::data_block).
I tried extracting a base class of BlockBuilder without the last_key
tracking at all, but that became complicated by NewFlushBlockPolicy() in
the public API referencing BlockBuilder, which would need to be the base
class, and I don't want to replace nearly all the internal references to
BlockBuilder.
Possible follow-up:
* Investigate / consider using AddWithLastKey in more places
This improvement should stack with https://github.com/facebook/rocksdb/issues/9039
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9040
Test Plan:
TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
Run 1: 278929 vs. 267799 (+4.2%)
Run 2: 281836 vs. 267432 (+5.4%)
Run 3: 278279 vs. 270454 (+2.9%)
(This benchmark is chosen to have detectable signal-to-noise, not to
represent expected improvement percent on real workloads.)
Reviewed By: mrambacher
Differential Revision: D31706033
Pulled By: pdillinger
fbshipit-source-id: 8a50fe6fefdd67b6d7665ffa687bbdcf5ad0d5ec
Summary:
Implementation of https://github.com/facebook/rocksdb/issues/8221, plus/including extension of Java options API to allow the get() of options from RocksDB. The extension allows more comprehensive testing of options at the Java side, by validating that the options are set at the C++ side.
Variations on methods:
MutableColumnFamilyOptions.MutableColumnFamilyOptionsBuilder getOptions()
MutableDBOptions.MutableDBOptionsBuilder getDBOptions()
retrieve the options via RocksDB C++ interfaces, and parse the resulting string into one of the Java-style option objects.
This necessitated generalising the parsing of option strings in Java, which now parses the full range of option strings returned by the C++ interface, rather than a useful subset. This necessitates the list-separator being changed to :(colon) from , (comma).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8999
Reviewed By: jay-zhuang
Differential Revision: D31655487
Pulled By: ltamasi
fbshipit-source-id: c38e98145c81c61dc38238b0df580db176ce4efd
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
If `DB::Close()` is called in multi-thread env, the resource
could be double released, which causes exception or assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8970
Test Plan:
Test with multi-thread benchmark, with each thread try to
close the DB at the end.
Reviewed By: pdillinger
Differential Revision: D31242042
Pulled By: jay-zhuang
fbshipit-source-id: a61276b1b61e07732e375554106946aea86a23eb
Summary:
New classes FileStorageInfo and LiveFileStorageInfo and
'experimental' function DB::GetLiveFilesStorageInfo, which is intended
to largely replace several fragmented DB functions needed to create
checkpoints and backups.
This function is now used to create checkpoints and backups, because
it fixes many (probably not all) of the prior complexities of checkpoint
not having atomic access to DB metadata. This also ensures strong
functional test coverage of the new API. Specifically, much of the old
CheckpointImpl::CreateCustomCheckpoint has been migrated to and
updated in DBImpl::GetLiveFilesStorageInfo, with the former now
calling the latter.
Also, the class FileStorageInfo in metadata.h compatibly replaces
BackupFileInfo and serves as a new base class for SstFileMetaData.
Some old fields of SstFileMetaData are still provided (for now) but
deprecated.
Although FileStorageInfo::directory is accurate when using db_paths
and/or cf_paths, these have never been supported by Checkpoint
nor BackupEngine and still are not. This change does now detect
these cases and return NotSupported when appropriate. (More work
needed for support.)
Somehow this change broke ProgressCallbackDuringBackup, but
the progress_callback logic was dubious to begin with because it
would call the callback based on copy buffer size, not size actually
copied. Logic and test updated to track size actually copied
per-thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968
Test Plan:
tests updated.
DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl.
DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo,
including reading the data after DB close.
Added CheckpointTest.CheckpointWithDbPath (NotSupported).
Reviewed By: siying
Differential Revision: D31242045
Pulled By: pdillinger
fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0
Summary:
The code in `IngestExternalFiles()` that bumps the DB's sequence number
depending on what seqnos were assigned to the files has 3 bugs:
1) There is an assertion that the sequence number is increased in all the
affected column families, but this is unnecessary, it is fine if some files can
stick to a lower sequence number. It is very easy to hit the assertion: it is
sufficient to insert 2 files in 2 CFs, one which overlaps the CF and one that
doesn't (for example the CF is empty). The line added in the
`IngestFilesIntoMultipleColumnFamilies_Success` test makes the assertion fail.
2) SetLastSequence() is called with the sum of all the bumps across CFs, but we
should take the maximum instead, as all CFs start with the current seqno and bump
it independently.
3) The code above is accidentally under a `#ifndef NDEBUG`, so it doesn't run in
optimized builds, so some files may be assigned seqnos from the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9005
Test Plan:
Added line in `IngestFilesIntoMultipleColumnFamilies_Success` that
triggers the assertion, verified that the test (and all the others) pass after
the fix.
Reviewed By: ajkr
Differential Revision: D31597892
Pulled By: ot
fbshipit-source-id: c2d3237f90290df1178736ace8653a9623f5a770
Summary:
`FaultInjectionTest{Env,FS}::ReopenWritableFile()` functions were accidentally deleting WALs from previous `db_stress` runs causing verification to fail. They were operating under the assumption that `ReopenWritableFile()` would delete any existing file. It was a reasonable assumption considering the `{Env,FileSystem}::ReopenWritableFile()` documentation stated that would happen. The only problem was neither the implementations we offer nor the "real" clients in RocksDB code followed that contract. So, this PR updates the contract as well as fixing the fault injection client usage.
The fault injection change exposed that `ExternalSSTFileBasicTest.SyncFailure` was relying on a fault injection `Env` dropping unsynced data written by a regular `Env`. I changed that test to make its `SstFileWriter` use fault injection `Env`, and also implemented `LinkFile()` in fault injection so the unsynced data is tracked under the new name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8995
Test Plan:
- Verified it fixes the following failure:
```
$ ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --ops_per_thread=1000 --prefixpercent=0 --readpercent=60 --reopen=0 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
$ ./db_stress --avoid_flush_during_recovery=1 --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --destroy_db_initially=0 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=10 --key_len_percent_dist=1,30,69 --max_bytes_for_level_base=4194304 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_write_fault_one_in=16 --ops_per_thread=1000 --prefix_size=-1 --prefixpercent=0 --readpercent=50 --sync=1 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
Verification failed for column family 0 key 000000000000001300000000000000857878787878 (1143): Value not found: NotFound:
Crash-recovery verification failed :(
...
```
- `make check -j48`
Reviewed By: ltamasi
Differential Revision: D31495388
Pulled By: ajkr
fbshipit-source-id: 7886ccb6a07cb8b78ad7b6c1c341ccf40bb68385
Summary:
Add the file temperature to `IngestExternalFileArg` such that when SST files are ingested, user is able to assign the temperature to each SST file. If the temperature vector is empty or its size does not match the file name vector size, all ingested SST files will be assigned with `Temperature::unKnown`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8949
Test Plan: add the new test and make check
Reviewed By: siying
Differential Revision: D31127852
Pulled By: zhichao-cao
fbshipit-source-id: 141a81f0f7b473d88f4ab0cb2a21a114cbc6f83c
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8991
Test Plan: the new test hangs forever without this fix and passes with this fix.
Reviewed By: hx235
Differential Revision: D31456419
Pulled By: ajkr
fbshipit-source-id: a82c0e5560b6e6153089dccd8e46163c61b07bff
Summary:
Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB.
Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912
Test Plan: add new tests to lru_cache_test and pass make check.
Reviewed By: pdillinger
Differential Revision: D31452871
Pulled By: zhichao-cao
fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48
Summary:
The ldb list_live_files_metadata command does not print any information about blob files currently. We would like to add this functionality. Note that list_live_files_metadata has two different modes of operation: the one shown above, which shows the LSM tree structure, and another one, which can be enabled using the flag --sort_by_filename and simply lists the files in numerical order regardless of level. We would like to show blob files in both modes.
Changes:
1. Using GetAllColumnFamilyMetaData API instead of GetLiveFilesMetaData API for fetching live files data.
Testing:
1. Created a sample rocksdb instance using dbbench command (this creates both SST and blob files)
2. Checked if the blob files are listed or not by using ldb commands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8976
Reviewed By: ltamasi
Differential Revision: D31316061
Pulled By: pradeepambati
fbshipit-source-id: d15cdea192febf7a45f28deee2ba40615d3d84ab
Summary:
If WAL dir is different from the DB dir, we should still honor the SstFileManager deletion rate limit for SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8967
Test Plan: Add a new unit test in db_sst_test
Reviewed By: pdillinger
Differential Revision: D31220116
Pulled By: anand1976
fbshipit-source-id: bcde8a53a7d728e15e597fb5d07ee86c1b38bd28
Summary:
Context:
Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation.
- Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context`
- Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process
- Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder`
- `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter
- Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919
Test Plan:
- Passed the added assertion for `context.level_at_creation`
- Passed existing tests
- Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything
Reviewed By: anand1976
Differential Revision: D30951729
Pulled By: hx235
fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
Peter Dillinger