Summary:
FIFO compaction can theoretically open a DB with any compaction style.
However, the current code only allows FIFO compaction to open a DB with
a single level.
This PR relaxes the limitation of FIFO compaction and allows it to open a
DB with multiple levels. Below is the read / write / compaction behavior:
* The read behavior is untouched, and it works like a regular rocksdb instance.
* The write behavior is untouched as well. When a FIFO compacted DB
is opened with multiple levels, all new files will still be in level 0, and no files
will be moved to a different level.
* Compaction logic is extended. It will first identify the bottom-most non-empty level.
Then, it will delete the oldest file in that level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10348
Test Plan:
Added a new test to verify the migration from level to FIFO where the db has multiple levels.
Extended existing test cases in db_test and db_basic_test to also verify
all entries of a key after reopening the DB with FIFO compaction.
Reviewed By: jay-zhuang
Differential Revision: D40233744
fbshipit-source-id: 6cc011d6c3467e6bfb9b6a4054b87619e69815e1
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
Using the Sequence number to time mapping to decide if a key is hot or not in
compaction and place it in the corresponding level.
Note: the feature is not complete, level compaction will run indefinitely until
all penultimate level data is cold and small enough to not trigger compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10370
Test Plan:
CI
* Run basic db_bench for universal compaction manually
Reviewed By: siying
Differential Revision: D37892338
Pulled By: jay-zhuang
fbshipit-source-id: 792bbd91b1ccc2f62b5d14c53118434bcaac4bbe
Summary:
This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code.
A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest.
TODO:
1. Figure out how to build it in CircleCI (requires some dependencies to be installed)
2. Do some stress testing with coroutines enabled
No regression in synchronous MultiGet between this branch and main -
```
./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics
```
Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)```
Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)```
More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file.
1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) -
No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)```
Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)```
2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file -
No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)```
Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)```
3. Single thread CPU bound workload with ~2 key overlap/file -
No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)```
Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)```
4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file -
No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ```
Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968
Reviewed By: akankshamahajan15
Differential Revision: D36348563
Pulled By: anand1976
fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696
Summary:
**Context:**
Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`.
Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags.
**Summary:**
- Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that
- Added missing db bench/stress test for some memory charging features
- Renamed related test suite to indicate they are under the same theme of memory charging
- Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication
- Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926
Test Plan:
- New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)`
- New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)`
- CI
- db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'`
#-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721
20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465**
40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078**
- db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal
Reviewed By: ajkr
Differential Revision: D36054712
Pulled By: hx235
fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
When MultiGet() determines that multiple query keys can be
served by examining the same data block in block cache (one Lookup()),
each PinnableSlice referring to data in that data block needs to hold
on to the block in cache so that they can be released at arbitrary
times by the API user. Historically this is accomplished with extra
calls to Ref() on the Handle from Lookup(), with each PinnableSlice
cleanup calling Release() on the Handle, but this creates extra
contention on the block cache for the extra Ref()s and Release()es,
especially because they hit the same cache shard repeatedly.
In the case of merge operands (possibly more cases?), the problem was
compounded by doing an extra Ref()+eventual Release() for each merge
operand for a key reusing a block (which could be the same key!), rather
than one Ref() per key. (Note: the non-shared case with `biter` was
already one per key.)
This change optimizes MultiGet not to rely on these extra, contentious
Ref()+Release() calls by instead, in the shared block case, wrapping
the cache Release() cleanup in a refcounted object referenced by the
PinnableSlices, such that after the last wrapped reference is released,
the cache entry is Release()ed. Relaxed atomic refcounts should be
much faster than mutex-guarded Ref() and Release(), and much less prone
to a performance cliff when MultiGet() does a lot of block sharing.
Note that I did not use std::shared_ptr, because that would require an
extra indirection object (shared_ptr itself new/delete) in order to
associate a ref increment/decrement with a Cleanable cleanup entry. (If
I assumed it was the size of two pointers, I could do some hackery to
make it work without the extra indirection, but that's too fragile.)
Some details:
* Fixed (removed) extra block cache tracing entries in cases of cache
entry reuse in MultiGet, but it's likely that in some other cases traces
are missing (XXX comment inserted)
* Moved existing implementations for cleanable.h from iterator.cc to
new cleanable.cc
* Improved API comments on Cleanable
* Added a public SharedCleanablePtr class to cleanable.h in case others
could benefit from the same pattern (potentially many Cleanables and/or
smart pointers referencing a shared Cleanable)
* Add a typedef for MultiGetContext::Mask
* Some variable renaming for clarity
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899
Test Plan:
Added unit tests for SharedCleanablePtr.
Greatly enhanced ability of existing tests to detect cache use-after-free.
* Release PinnableSlices from MultiGet as they are read rather than in
bulk (in db_test_util wrapper).
* In ASAN build, default to using a trivially small LRUCache for block_cache
so that entries are immediately erased when unreferenced. (Updated two
tests that depend on caching.) New ASAN testsuite running time seems
OK to me.
If I introduce a bug into my implementation where we skip the shared
cleanups on block reuse, ASAN detects the bug in
`db_basic_test *MultiGet*`. If I remove either of the above testing
enhancements, the bug is not detected.
Consider for follow-up work: manipulate or randomize ordering of
PinnableSlice use and release from MultiGet db_test_util wrapper. But in
typical cases, natural ordering gives pretty good functional coverage.
Performance test:
In the extreme (but possible) case of MultiGetting the same or adjacent keys
in a batch, throughput can improve by an order of magnitude.
`./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200`
Before ops/sec, num=5: 1,384,394
Before ops/sec, num=500: 6,423,720
After ops/sec, num=500: 10,658,794
After ops/sec, num=5: 16,027,257
Also note that previously, with high parallelism, having query keys
concentrated in a single block was worse than spreading them out a bit. Now
concentrated in a single block is faster than spread out, which is hopefully
consistent with natural expectation.
Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12):
Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec
After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec
Possibly better, possibly in the noise.
Reviewed By: anand1976
Differential Revision: D35907003
Pulled By: pdillinger
fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e
Summary:
The patch replaces `std::map` with a sorted `std::vector` for
`VersionStorageInfo::blob_files_` and preallocates the space
for the `vector` before saving the `BlobFileMetaData` into the
new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`.
These changes reduce the time the DB mutex is held while
saving new `Version`s, and using a sorted `vector` also makes
lookups faster thanks to better memory locality.
In addition, the patch introduces helper methods
`VersionStorageInfo::GetBlobFileMetaData` and
`VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by
clients to perform lookups in the `vector`, and does some general
cleanup in the parts of code where blob file metadata are used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526
Test Plan:
Ran `make check` and the crash test script for a while.
Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced:
```
numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value>
```
Final statistics before the patch:
```
Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s
Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s
```
With the patch:
```
Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s
Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s
```
Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs.
Reviewed By: riversand963
Differential Revision: D34082728
Pulled By: ltamasi
fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
I'm working on a new format_version=6 to support context
checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test
updates to support that change.
Test coverage data and manual inspection agree on dead code in
block_based_table_reader.cc (removed).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240
Test Plan:
tests enhanced to cover more cases etc.
Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible.
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true}
(Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness)
Before w/ wal: 454512
After w/ wal: 444820 (-2.1%)
Before w/o wal: 1004560
After w/o wal: 998897 (-0.6%)
Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case.
This regression will be corrected in a follow-up PR.
Reviewed By: ajkr
Differential Revision: D32813769
Pulled By: pdillinger
fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
Made SystemClock into a Customizable class, complete with CreateFromString.
Cleaned up some of the existing SystemClock implementations that were redundant (NoSleep was the same as the internal one for MockEnv).
Changed MockEnv construction to allow Clock to be passed to the Memory/MockFileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8636
Reviewed By: zhichao-cao
Differential Revision: D30483360
Pulled By: mrambacher
fbshipit-source-id: cd0e3a876c39f8c98fe13374c06e8edbd5b9f2a1
Summary:
* FullKey and ParseFullKey appear to serve no purpose in the public API
(or anything else) so removed. Only use in one test updated.
* NumberToString serves no purpose vs. ToString so removed, numerous
calls updated
* Remove unnecessary forward declarations in metadata.h by re-arranging
class definitions.
* Remove some unneeded semicolons
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736
Test Plan: existing tests
Reviewed By: mrambacher
Differential Revision: D30700039
Pulled By: pdillinger
fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2
Summary:
Made the EncryptionProvider and BlockCipher classes inherit from Customizable. Added/fixed the CreateFromString method to these classes to create instances from builtin or registered classes. Added tests to verify that instances can be registered and retrieved as appropriate.
Added the ability to configure the builtin (CTR, ROT13) classes from configurable properties. Added the appropriate tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8354
Reviewed By: zhichao-cao
Differential Revision: D29558949
Pulled By: mrambacher
fbshipit-source-id: c20286b32d179777e060f51a58943e9b0cf81d04
Summary:
- Added CreateFromString method to Env and FilesSystem to replace LoadEnv/Load. This method/signature is a precursor to making these classes extend Customizable.
- Added CreateFromSystem to Env. This method standardizes creating an Env from the environment variables. Previously, some places would check TEST_ENV_URI and others would also check TEST_FS_URI. Now the code is more command/standardized.
- Added CreateFromFlags to Env. These method allows Env to be create from string options (such as GFLAGS options) in a more standard way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8174
Reviewed By: zhichao-cao
Differential Revision: D28999603
Pulled By: mrambacher
fbshipit-source-id: 88e6911e7e91f908458a7fe10a20e93ecbc275fb
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Resolves https://github.com/facebook/rocksdb/issues/8014
- Add an assertion on `DB::Open` to ensure `db_options.max_open_files` is unlimited if FIFO Compaction is being used.
- This is to align with what the docs mention and to prevent premature data deletion.
- Update tests to work with this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8172
Test Plan:
```bash
$ make check -j$(nproc)
Generated TARGETS Summary:
- 6 libs
- 0 binarys
- 180 tests
```
Reviewed By: ajkr
Differential Revision: D27768792
Pulled By: thejchap
fbshipit-source-id: cf6350535e3a3577fec72bcba75b3c094dc7a6f3
Summary:
Extend support to track blob files in SST File manager.
This PR notifies SstFileManager whenever a new blob file is created,
via OnAddFile and an obsolete blob file deleted via OnDeleteFile
and delete file via ScheduleFileDeletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D26891237
Pulled By: akankshamahajan15
fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6
Summary:
Haven't seen any production issues with new Bloom filter and
it's now > 1 year old (added in 6.6.0).
Updated check_format_compatible.sh and HISTORY.md
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8017
Test Plan: tests updated (or prior bugs fixed)
Reviewed By: ajkr
Differential Revision: D26762197
Pulled By: pdillinger
fbshipit-source-id: 0e755c46b443087c1544da0fd545beb9c403d1c2
Summary:
Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584
Test Plan: Run all existing tests.
Reviewed By: pdillinger
Differential Revision: D20626739
fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798
Reviewed By: jay-zhuang
Differential Revision: D25680451
Pulled By: pdillinger
fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917
Summary:
If fsync is disabled in a unit test, then do not track WAL in MANIFEST, because on DB recovery, the WAL might be missing because the directory is not fsynced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7669
Test Plan: Tests with fsync enabled should pass.
Reviewed By: riversand963
Differential Revision: D24941431
Pulled By: cheng-chang
fbshipit-source-id: ab3ff0f90769795cfb4e4d6dcf084ea5545d1975
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Add all status handling in db_properties_test so that it can pass ASSERT_STATUS_CHECKED.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7490
Test Plan: Run the test with ASSERT_STATUS_CHECKED
Reviewed By: jay-zhuang
Differential Revision: D24065382
fbshipit-source-id: e008916155196891478c964df0226545308ca71d
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Cleaned up the public API to use the EncryptedEnv. This change will allow providers to be developed and added to the system easier in the future. It will also allow better integration in the future with the OPTIONS file.
- The internal classes were moved out of the public API into an internal "env_encryption_ctr.h" header. Short-cut constructors were added to provide the original API functionality.
- The APIs to the constructors were changed to take shared_ptr, rather than raw pointers or references to allow better memory management and alternative implementations.
- CreateFromString methods were added to allow future expansion to other provider and cipher implementations through a standard API.
Additionally, there was a code duplication in the NewXXXFile methods. This common code was moved under a templatized function.
A first-pass at structuring the code was made to potentially allow multiple EncryptionProviders in a single EncryptedEnv. The idea was that different providers may use different cipher keys or different versions/algorithms. The EncryptedEnv should have some means of picking different providers based on information. The groundwork was started for this (the use of the provider_ member variable was localized) but the work has not been completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7279
Reviewed By: jay-zhuang
Differential Revision: D23709440
Pulled By: zhichao-cao
fbshipit-source-id: 0e845fff0e03a52603eb9672b4ade32d063ff2f2
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.
This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210
Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.
Reviewed By: anand1976
Differential Revision: D22861323
Pulled By: ajkr
fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Peter Dillinger
