Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds has been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9455
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33811664
Pulled By: hx235
fbshipit-source-id: 866859427fe710354a90f1095057f80116365ff0
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
Add an option to set the WAL compression algorithm - wal_compression.
TODO: WAL compression is not implemented and will only support zstd initially. Will be added in subsequent diffs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9432
Reviewed By: pdillinger
Differential Revision: D33797275
Pulled By: sidroyc
fbshipit-source-id: 8db81d9c9cea5e2e4f1445d3aecad8106137b8e7
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Several improvements to SimulatedHybridFileSystem:
(1) Allow a mode where all I/Os to all files simulate HDD. This can be enabled in db_bench using -simulate_hdd
(2) Latency calculation is slightly more accurate
(3) Allow to simulate more than one HDD spindles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9301
Test Plan: Run db_bench and observe the results are reasonable.
Reviewed By: jay-zhuang
Differential Revision: D33141662
fbshipit-source-id: b736e58c4ba910d06899cc9ccec79b628275f4fa
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
It is useful to add options.manual_wal_flush to db_bench
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9132
Test Plan: Run the benchamrk with the option.
Reviewed By: ltamasi
Differential Revision: D32188060
fbshipit-source-id: a70835d3cad0f30095218dfda1daff0a432892e5
Summary:
Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles.
When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed.
In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749
Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end.
Reviewed By: jay-zhuang
Differential Revision: D30735261
fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
This commit introduces incremental compaction in univeral style for space amplification. This follows the first improvement mentioned in https://rocksdb.org/blog/2021/04/12/universal-improvements.html . The implemention simply picks up files about size of max_compaction_bytes to compact and execute if the penalty is not too big. More optimizations can be done in the future, e.g. prioritizing between this compaction and other types. But for now, the feature is supposed to be functional and can often reduce frequency of full compactions, although it can introduce penalty.
In order to add cut files more efficiently so that more files from upper levels can be included, SST file cutting threshold (for current file + overlapping parent level files) is set to 1.5X of target file size. A 2MB target file size will generate files like this: https://gist.github.com/siying/29d2676fba417404f3c95e6c013c7de8 Number of files indeed increases but it is not out of control.
Two set of write benchmarks are run:
1. For ingestion rate limited scenario, we can see full compaction is mostly eliminated: https://gist.github.com/siying/959bc1186066906831cf4c808d6e0a19 . The write amp increased from 7.7 to 9.4, as expected. After applying file cutting, the number is improved to 8.9. In another benchmark, the write amp is even better with the incremental approach: https://gist.github.com/siying/d1c16c286d7c59c4d7bba718ca198163
2. For ingestion rate unlimited scenario, incremental compaction turns out to be too expensive most of the time and is not executed, as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8655
Test Plan: Add unit tests to the functionality.
Reviewed By: ajkr
Differential Revision: D31787034
fbshipit-source-id: ce813e63b15a61d5a56e97bf8902a1b28e011beb
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
In case of IO uring bugs, we need to provide a way for users to turn it off.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8931
Test Plan: Manually run db_bench with/without the option and verify the behavior
Reviewed By: pdillinger
Differential Revision: D31040252
Pulled By: anand1976
fbshipit-source-id: 56f2537d6ac8488c9e126296d8190ad9e0158f70
Summary:
Because even 32-bit systems can have large files
This is a "change" that I don't want intermingled with an upcoming refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8926
Test Plan: CI
Reviewed By: zhichao-cao
Differential Revision: D31020974
Pulled By: pdillinger
fbshipit-source-id: ca9eb4510697df6f1f55e37b37730b88b1809a92
Summary:
Make the Statistics object into a Customizable object. Statistics can now be stored and created to/from the Options file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8637
Reviewed By: zhichao-cao
Differential Revision: D30530550
Pulled By: mrambacher
fbshipit-source-id: 5fc7d01d8431f37b2c205bbbd8342c9f697023bd
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
`Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.)
`Replayer::Replay()` reports the results via a callback function.
New interface:
`TraceRecordResult` in "rocksdb/trace_record_result.h".
`DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657
Reviewed By: ajkr
Differential Revision: D30290216
Pulled By: autopear
fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6
Summary:
New public interfaces:
`TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h".
`Replayer`, available in `rocksdb/utilities/replayer.h`.
User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file.
Unit tests:
- `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes.
- `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611
Reviewed By: ajkr
Differential Revision: D30266329
Pulled By: autopear
fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
`GenericRateLimiter` slow path handles requests that cannot be satisfied
immediately. Such requests enter a queue, and their thread stays in `Request()`
until they are granted or the rate limiter is stopped. These threads are
responsible for unblocking themselves. The work to do so is split into two main
duties.
(1) Waiting for the next refill time.
(2) Refilling the bytes and granting requests.
Prior to this PR, the slow path logic involved a leader election algorithm to
pick one thread to perform (1) followed by (2). It elected the thread whose
request was at the front of the highest priority non-empty queue since that
request was most likely to be granted. This algorithm was efficient in terms of
reducing intermediate wakeups, which is a thread waking up only to resume
waiting after finding its request is not granted. However, the conceptual
complexity of this algorithm was too high. It took me a long time to draw a
timeline to understand how it works for just one edge case yet there were so
many.
This PR drops the leader election to reduce conceptual complexity. Now, the two
duties can be performed by whichever thread acquires the lock first. The risk
of this change is increasing the number of intermediate wakeups, however, we
took steps to mitigate that.
- `wait_until_refill_pending_` flag ensures only one thread performs (1). This\
prevents the thundering herd problem at the next refill time. The remaining\
threads wait on their condition variable with an unbounded duration -- thus we\
must remember to notify them to ensure forward progress.
- (1) is typically done by a thread at the front of a queue. This is trivial\
when the queues are initially empty as the first choice that arrives must be\
the only entry in its queue. When queues are initially non-empty, we achieve\
this by having (2) notify a thread at the front of a queue (preferring higher\
priority) to perform the next duty.
- We do not require any additional wakeup for (2). Typically it will just be\
done by the thread that finished (1).
Combined, the second and third bullet points above suggest the refill/granting
will typically be done by a request at the front of its queue. This is
important because one wakeup is saved when a granted request happens to be in an
already running thread.
Note there are a few cases that still lead to intermediate wakeup, however. The
first two are existing issues that also apply to the old algorithm, however, the
third (including both subpoints) is new.
- No request may be granted (only possible when rate limit dynamically\
decreases).
- Requests from a different queue may be granted.
- (2) may be run by a non-front request thread causing it to not be granted even\
if some requests in that same queue are granted. It can happen for a couple\
(unlikely) reasons.
- A new request may sneak in and grab the lock at the refill time, before the\
thread finishing (1) can wake up and grab it.
- A new request may sneak in and grab the lock and execute (1) before (2)'s\
chosen candidate can wake up and grab the lock. Then that non-front request\
thread performing (1) can carry over to perform (2).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602
Test Plan:
- Use existing tests. The edge cases listed in the comment are all performance\
related; I could not really think of any related to correctness. The logic\
looks the same whether a thread wakes up/finishes its work early/on-time/late,\
or whether the thread is chosen vs. "steals" the work.
- Verified write throughput and CPU overhead are basically the same with and\
without this change, even in a rate limiter heavy workload:
Test command:
```
$ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000
```
Results before this PR:
```
fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s
7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k
```
Results after this PR:
```
fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s
7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k
```
Reviewed By: hx235
Differential Revision: D30048013
Pulled By: ajkr
fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
Introduction of a new `fillanddeleteuniquerandom` benchmark (`db_bench`) with 5 new option flags to simulate a benchmark where the following sequence is repeated multiple times:
"A set of keys S1 is inserted ('`disposable entries`'), then after some delay another set of keys S2 is inserted ('`persistent entries`') and the first set of keys S1 is deleted. S2 artificially represents the insertion of hypothetical results from some undefined computation done on the first set of keys S1. The next sequence can start as soon as the last disposable entry in the set S1 of this sequence is inserted, if the `delay` is non negligible."
New flags:
- `disposable_entries_delete_delay`: minimum delay in microseconds between insertion of the last `disposable` entry, and the start of the insertion of the first `persistent` entry.
- `disposable_entries_batch_size`: number of `disposable` entries inserted at the beginning of each sequence.
- `disposable_entries_value_size`: size of the random `value` string for the `disposable` entries.
- `persistent_entries_batch_size`: number of `persistent` entries inserted at the end of each sequence, right before the deletion of the `disposable` entries starts.
- `persistent_entries_value_size`: size of the random value string for the `persistent` entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8593
Reviewed By: pdillinger
Differential Revision: D29974436
Pulled By: bjlemaire
fbshipit-source-id: f578033e5b45e8268ba6fa6f38f4770c2e6e801d
Summary:
- Added Type/CreateFromString
- Added ability to load EventListeners to DBOptions
- Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473
Reviewed By: zhichao-cao
Differential Revision: D29901488
Pulled By: mrambacher
fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
Summary:
PR https://github.com/facebook/rocksdb/issues/8519 fix db_bench_tool.cc for MSVC build errors by simply copy-paste, this PR fix the copy-paste while also works for MSVC.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8553
Reviewed By: ajkr
Differential Revision: D29838056
Pulled By: jay-zhuang
fbshipit-source-id: 0cd60c146b87a355c3dc1061dfe813169d75cea4
Summary:
Add flags `overwrite_probability` and `overwrite_window_size` flag to `db_bench`.
Add the possibility of performing a `filluniquerandom` benchmark with an overwrite probability.
For each write operation, there is a probability _p_ that the write is an overwrite (_p_=`overwrite_probability`).
When an overwrite is decided, the key is randomly chosen from the last _N_ keys previously inserted into the DB (with _N_=`overwrite_window_size`).
When a pure write is decided, the key inserted into the DB is unique and therefore will not be an overwrite.
The `overwrite_window_size` is used so that the user can decide if the overwrite are mostly targeting recently inserted keys (when `overwrite_window_size` is small compared to the total number of writes), or can also target keys inserted "a long time ago" (when `overwrite_window_size` is comparable to total number of writes).
Note that total number of writes = # of unique insertions + # of overwrites.
No unit test specifically added.
Local testing show the following **throughputs** for `filluniquerandom` with 1M total writes:
- bypass the code inserts (no `overwrite_probability` flag specified): ~14.0MB/s
- `overwrite_probability=0.99`, `overwrite_window_size=10`: ~17.0MB/s
- `overwrite_probability=0.10`, `overwrite_window_size=10`: ~14.0MB/s
- `overwrite_probability=0.99`, `overwrite_window_size=1M`: ~14.5MB/s
- `overwrite_probability=0.10`, `overwrite_window_size=1M`: ~14.0MB/s
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8569
Reviewed By: pdillinger
Differential Revision: D29818631
Pulled By: bjlemaire
fbshipit-source-id: d472b4ea4e457a4da7c4ee4f14b40cccd6a4587a
Summary:
Tiny PR to add the `experimental_allow_mempurge` to the `db_bench` tool (`Mempurge` is the current prototype for memtable garbage collection).
This is useful to benchmark the prototype of this new feature, stress test it and help find new meaningful heuristics for GC.
By default, the flag to allow `mempurge` is set to `false`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8546
Reviewed By: anand1976
Differential Revision: D29738338
Pulled By: bjlemaire
fbshipit-source-id: 01892883a2f1c714c110718674da05992d6e2dd6
Summary:
Right now, db_bench with seekrandom and multiple DB setup creates iterator for all DBs just to query one of them. It's different from most real workloads. Fix it by only creating iterators that will be queried.
Also fix a bug that DBs are not destroyed in multi-DB mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7818
Test Plan: Run db_bench with single/multiDB X using/not using tailing iterator with ASAN build, and validate the behavior is expected.
Reviewed By: ajkr
Differential Revision: D25720226
fbshipit-source-id: c2ff7ff7120e5ba64287a30b057c5d29b2cbe20b
Summary:
Fixed a few MSVC (VCToolsVersion=14.0) build errors and warnings
* `DEFINE_string` is a macro and VC compiler complains that it cannot put [ifdef-inside-define](https://stackoverflow.com/questions/5586429/ifdef-inside-define)
* `sleep()` is not a recognizable function. Use `FLAGS_env->SleepForMicroseconds` instead
* Define precise type in comparison to avoid mismatch warning
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8519
Reviewed By: jay-zhuang
Differential Revision: D29683086
fbshipit-source-id: 8c80941472089f8daba84ae29597e75e603850e4
Summary:
1. Fix printing of stats when there are no writes (wamp=0). Previously had a div0 error
2. Added multireadrandom command as a valid target
3. Added ability to pass additional command line options to db_bench. Now can say things like benchmark.sh readrandom --mmap_read and the option will be passed to db_bench.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8346
Reviewed By: zhichao-cao
Differential Revision: D29500436
Pulled By: mrambacher
fbshipit-source-id: 54e90708aae9133be3a903e35efdf8f8abbd86fa
Summary:
Hello and thanks for RocksDB,
Here is a PR to add file deletes, renames and ```Flush()```, ```Sync()```, ```Fsync()``` and ```Close()``` to file ops report.
The reason is to help tune RocksDB options when using an env/filesystem with high latencies for file level ("metadata") operations, typically seen during ```DB::Open``` (```db_bench -num 0``` also see https://github.com/facebook/rocksdb/pull/7203 where IOTracing does not trace ```DB::Open```).
Before:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
After:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num files deleted: 3
Num files renamed: 4
Num Flush(): 10
Num Sync(): 5
Num Fsync(): 1
Num Close(): 2
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
Before:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
After:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num files deleted: 5
Num files renamed: 4
Num Flush(): 1000068
Num Sync(): 9
Num Fsync(): 1
Num Close(): 6
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
Another example showing how using ```DB::OpenForReadOnly``` reduces file operations compared to ```((Optimistic)Transaction)DB::Open```:
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -readonly true -report_file_operations true
...
Entries: 0
...
Num files opened: 8
Num files deleted: 0
Num files renamed: 0
Num Flush(): 0
Num Sync(): 0
Num Fsync(): 0
Num Close(): 0
Num Read(): 13
Num Append(): 0
Num bytes read: 374
Num bytes written: 0
```
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -report_file_operations true
...
Entries: 0
...
Num files opened: 14
Num files deleted: 3
Num files renamed: 4
Num Flush(): 14
Num Sync(): 5
Num Fsync(): 1
Num Close(): 3
Num Read(): 11
Num Append(): 10
Num bytes read: 7291
Num bytes written: 7357
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8448
Reviewed By: anand1976
Differential Revision: D29333818
Pulled By: zhichao-cao
fbshipit-source-id: a06a8c87f799806462319115195b3e94faf5f542
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
Marked the Ribbon filter and optimize_filters_for_memory features
as production-ready, each enabling memory savings for Bloom-like filters.
Use `NewRibbonFilterPolicy` in place of `NewBloomFilterPolicy` to use
Ribbon filters instead of Bloom, or `ribbonfilter` in place of
`bloomfilter` in configuration string.
Some small refactoring in db_stress.
Removed/refactored unused code in db_bench, in part preparing for future
default possibly being different from "disabled."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8408
Test Plan:
Lots of prior automated, ad-hoc, and "real world" testing.
Updated tests for new API names. Quick db_bench test:
bloom fillrandom
77730 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 89929384
ribbon fillrandom
71492 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 64531384
Reviewed By: mrambacher
Differential Revision: D29140805
Pulled By: pdillinger
fbshipit-source-id: d742c922722421678f95ad85eeb0aaebc9f5e49a
Summary:
- Added CreateFromString method to Env and FilesSystem to replace LoadEnv/Load. This method/signature is a precursor to making these classes extend Customizable.
- Added CreateFromSystem to Env. This method standardizes creating an Env from the environment variables. Previously, some places would check TEST_ENV_URI and others would also check TEST_FS_URI. Now the code is more command/standardized.
- Added CreateFromFlags to Env. These method allows Env to be create from string options (such as GFLAGS options) in a more standard way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8174
Reviewed By: zhichao-cao
Differential Revision: D28999603
Pulled By: mrambacher
fbshipit-source-id: 88e6911e7e91f908458a7fe10a20e93ecbc275fb
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
This PR adds a ```-secondary_cache_uri``` option to the cache_bench and db_bench tools to allow the user to specify a custom secondary cache URI. The object registry is used to create an instance of the ```SecondaryCache``` object of the type specified in the URI.
The main cache_bench code is packaged into a separate library, similar to db_bench.
An example invocation of db_bench with a secondary cache URI -
```db_bench --env_uri=ws://ws.flash_sandbox.vll1_2/ -db=anand/nvm_cache_2 -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=67108864 -cache_index_and_filter_blocks=true -secondary_cache_uri='cachelibwrapper://filename=/home/anand76/nvm_cache/cache_file;size=2147483648;regionSize=16777216;admPolicy=random;admProbability=1.0;volatileSize=8388608;bktPower=20;lockPower=12' -partition_index_and_filters=true -duration=1800```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8312
Reviewed By: zhichao-cao
Differential Revision: D28544325
Pulled By: anand1976
fbshipit-source-id: 8f209b9af900c459dc42daa7a610d5f00176eeed
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Hui Xiao