Summary: ...
Test Plan: Can't repro the test failure, but let's see what jenkins says
Reviewers: zagfox, sdong, ljin
Reviewed By: sdong, ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23061
Summary:
all shared_ptrs are in immutable_options now. This will also make
options assignment a little cheaper
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23001
Summary:
I found it is almost impossible to get rid of this function in a single
batch. I will take a step by step approach
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22995
Summary:
When we have multiple column families, users can issue Flush() on every column families to make sure everything is flushes, even if some of them might be empty. By skipping the waiting for empty cases, it can be greatly speed up.
Still wait for people's comments before writing unit tests for it.
Test Plan: Will write a unit test to make sure it is correct.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22953
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary: If we drop column family only from (single) write thread, we can be sure that nobody will drop the column family while we're writing (and our mutex is released). This greatly simplifies my patch that's getting rid of MakeRoomForWrite().
Test Plan: make check, but also running stress test
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22965
Summary:
That way we can see when this graph goes up and be happy.
Couple of changes:
1. title
2. fix db_bench to delete column families before deleting the DB. this was asserting when compiled in debug mode
3. don't sync manifest when disableDataSync. We discussed this offline. I can move it to separate diff if you'd like
Test Plan: ran it
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22815
Summary: as title
Test Plan: make release
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22935
Summary: Fix compaction bug in Cuckoo Table Builder. Use kvs_.size() instead of num_entries in FileSize() method. Also added tests.
Test Plan:
make check all
Also ran db_bench to generate multiple files.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22743
Summary: fixed memory leak in unit test DBIteratorBoundTest
Test Plan: ran valgrind test on my unit test
Reviewers: sdong
Differential Revision: https://reviews.facebook.net/D22911
Summary:
PlainTable takes reference instead of a copy. Keep a copy in the test
code
Test Plan: make asan_check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22899
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
Lots of travis builds are failing because on EnvPosixTest.RandomAccessUniqueID: https://travis-ci.org/facebook/rocksdb/builds/34400833
This is the result of their environment and not because of RocksDB's bug.
Also note that RocksDB works correctly even though UniqueID feature is not present in the system (as it's the case with os x)
Test Plan:
OPT=-DTRAVIS make env_test && ./env_test
Observed that offending tests are not being run
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22803
1, const qualifiers on return types make no sense and will trigger a compile warning: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2, class HistogramImpl has virtual functions and thus should have a virtual destructor
3, with some toolchain, the macro __STDC_FORMAT_MACROS is predefined and thus should be checked before define
Change-Id: I69747a03bfae88671bfbb2637c80d17600159c99
Signed-off-by: liuhuahang <liuhuahang@zerus.co>
Summary: as title
Test Plan: no
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22761
Summary: as title
Test Plan: none
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22737
Summary: It only covers Open() with default column family right now
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22467
Summary:
Before this diff, whenever we Write to non-existing column family, Write() would fail.
This diff adds an option to not fail a Write() when WriteBatch points to non-existing column family. MongoDB said this would be useful for them, since they might have a transaction updating an index that was dropped by another thread. This way, they don't have to worry about checking if all indexes are alive on every write. They don't care if they lose writes to dropped index.
Test Plan: added a small unit test
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22143
Summary:
1. assert db->Put to be true in db_stress
2. begin column family with name "1".
Test Plan: 1. ./db_stress
Reviewers: ljin, yhchiang, dhruba, sdong, igor
Reviewed By: sdong, igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22659
Igor Canadi