Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Added support for sequential read-ahead file that can prefetch the read data and later serve it from internal cache buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5580
Differential Revision: D16287082
Pulled By: elipoz
fbshipit-source-id: a3e7ad9643d377d39352ff63058ce050ec31dcf3
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
It it not safe to assume application had sync the SST file before ingest it into DB. Also the directory to put the ingested file needs to be fsync, otherwise the file can be lost. For integrity of RocksDB we need to sync the ingested file and directory before apply the change to manifest.
Also syncing after writing global sequence when write_global_seqno=true was removed in https://github.com/facebook/rocksdb/issues/4172. Adding it back.
Fixes https://github.com/facebook/rocksdb/issues/5287.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5435
Test Plan:
Test ingest file with ldb command and observe fsync/fdatasync in strace output. Tried both move_files=true and move_files=false.
https://gist.github.com/yiwu-arbug/650a4023f57979056d83485fa863bef9
More test suggestions are welcome.
Differential Revision: D15941675
Pulled By: riversand963
fbshipit-source-id: 389533f3923065a96df2cdde23ff4724a1810d78
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Peter Dillinger