Summary:
We introduced smallest_prep optimization in this commit b225de7e10, which enables storing the smallest uncommitted sequence number along with the snapshot. This enables the readers that read from the snapshot to skip further checks and safely assumed the data is committed if its sequence number is less than smallest uncommitted when the snapshot was taken. The problem was that smallest uncommitted and the snapshot must be taken atomically, and the lack of atomicity had led to readers using a smallest uncommitted after the snapshot was taken and hence mistakenly skipping some data.
This patch fixes the problem by i) separating the process of removing of prepare entries from the AddCommitted function, ii) removing the prepare entires AFTER the committed sequence number is published, iii) getting smallest uncommitted (from the prepare list) BEFORE taking a snapshot. This guarantees that the smallest uncommitted that is accompanied with a snapshot is less than or equal of such number if it was obtained atomically.
Tested by running MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest that was failing sporadically.
Closes https://github.com/facebook/rocksdb/pull/3703
Differential Revision: D7581934
Pulled By: maysamyabandeh
fbshipit-source-id: dc9d6f4fb477eba75d4d5927326905b548a96a32
Summary:
Add `compaction_reason` as part of event log for event `compaction started`.
Add counters for each `CompactionReason`.
Closes https://github.com/facebook/rocksdb/pull/3679
Differential Revision: D7550348
Pulled By: riversand963
fbshipit-source-id: a19cff3a678c785aa5ef41aac78b9a5968fcc34d
Summary:
In `cf_options_type_info`, the deprecated options are all considered to have offset zero in the `MutableCFOptions` struct. Previously we weren't checking in `GetMutableOptionsFromStrings` whether the provided option was deprecated or not and simply writing the provided value to the offset specified by `cf_options_type_info`. That meant setting any deprecated option would overwrite the first element in the struct, which is `write_buffer_size`. `db_stress` hit this often since it calls `SetOptions` with `soft_rate_limit=0` and `hard_rate_limit=0`, which are both deprecated so cause `write_buffer_size` to be set to zero, which causes it to crash on the following assertion:
```
db_stress: db/memtable.cc:106: rocksdb::MemTable::MemTable(const rocksdb::InternalKeyComparator&, const rocksdb::ImmutableCFOptions&, const rocksdb::MutableCFOptions&, rocksdb::WriteBufferManager*, rocksdb::SequenceNumber, uint32_t): Assertion `!ShouldScheduleFlush()' failed.
```
We fix it by skipping deprecated options (and logging a warning) when users provide them to `SetOptions`. I didn't want to fail the call for compatibility reasons.
Closes https://github.com/facebook/rocksdb/pull/3700
Differential Revision: D7572596
Pulled By: ajkr
fbshipit-source-id: bd5d84e14c0c39f30c5d4c6df7c1503d2c28ecf1
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
The existing unit test did not set the level so the check for pinned partitioned filter/index being properly released from the block cache was not properly exercised as they only take effect in level 0. As a result a memory leak in pinned partitioned filters was hidden. The patch fix the test as well as the bug.
Closes https://github.com/facebook/rocksdb/pull/3692
Differential Revision: D7559763
Pulled By: maysamyabandeh
fbshipit-source-id: 55eff274945838af983c764a7d71e8daff092e4a
Summary:
In this case, we add input files of compaction, not outputs.
Closes https://github.com/facebook/rocksdb/pull/3686
Differential Revision: D7556781
Pulled By: ajkr
fbshipit-source-id: ae135bb6eda60db8f275a9ba2d21c18aaadef5b7
Summary:
- inflate the argument passed as `max_compact_bytes_per_del_file` by a bit (10%). The intent of this argument is prevent L0 files from being intra-L0 compacted multiple times. Without compression, some intra-L0 compactions exceed this limit (and thus aren't executed), even though none of their files have gone through intra-L0 before.
- fix `FindIntraL0Compaction` as it was rejecting some valid intra-L0 compactions. In particular, `compact_bytes_per_del_file` is the work-per-deleted-file for the span [0, span_len), whereas `new_compact_bytes_per_del_file` is the work-per-deleted-file for the span [0, span_len+1). The former is more correct for checking whether we've found an eligible span.
Closes https://github.com/facebook/rocksdb/pull/3684
Differential Revision: D7530396
Pulled By: ajkr
fbshipit-source-id: cad4f50902bdc428ac9ff6fffb13eb288648d85e
Summary:
Adding some stats that would be helpful to monitor if the DB has gone to unlikely stats that would hurt the performance. These are mostly when we end up needing to acquire a mutex.
Closes https://github.com/facebook/rocksdb/pull/3683
Differential Revision: D7529393
Pulled By: maysamyabandeh
fbshipit-source-id: f7d36279a8f39bd84d8ddbf64b5c97f670c5d6d9
Summary:
Currently dump_wal cannot print the prepared records from the WAL that is generated by WRITE_PREPARED write policy since the default reaction of the handler is to return NotSupported if markers of WRITE_PREPARED are encountered. This patch enables the admin to pass --write_committed=false option, which will be accordingly passed to the handler. Note that DBFileDumperCommand and DBDumperCommand are still not updated by this patch but firstly they are not urgent and secondly we need to revise this approach later when we also add WRITE_UNPREPARED markers so I leave it for future work.
Tested by running it on a WAL generated by WRITE_PREPARED:
$ ./ldb dump_wal --walfile=/dev/shm/dbbench/000003.log | grep BEGIN_PREARE | head -1
1,2,70,0,BEGIN_PREARE
$ ./ldb dump_wal --walfile=/dev/shm/dbbench/000003.log --write_committed=false | grep BEGIN_PREARE | head -1
1,2,70,0,BEGIN_PREARE PUT(0) : 0x30303031313330313938 PUT(0) : 0x30303032353732313935 END_PREPARE(0x74786E31313535383434323738303738363938313335312D30)
Closes https://github.com/facebook/rocksdb/pull/3682
Differential Revision: D7522090
Pulled By: maysamyabandeh
fbshipit-source-id: a0332207261c61e18b2f9dfbe9feecd9a1339aca
Summary:
When `max_valid_backups_to_open` is set, the `BackupEngine` doesn't know about the files referenced by existing backups. This PR prevents us from deleting valid files when that option is set, in cases where we are unable to accurately determine refcount. There are warnings logged when we may miss deleting unreferenced files, and a recommendation in the header for users to periodically unset this option and run a full `GarbageCollect`.
Closes https://github.com/facebook/rocksdb/pull/3518
Differential Revision: D7008331
Pulled By: ajkr
fbshipit-source-id: 87907f964dc9716e229d08636a895d2fc7b72305
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Adds two stats to allow us measuring the false positive rate of full filters:
- The total count of positives: rocksdb.bloom.filter.full.positive
- The total count of true positives: rocksdb.bloom.filter.full.true.positive
Not the term "full" in the stat name to indicate that they are meaningful in full filters. block-based filters are to be deprecated soon and supporting it is not worth the the additional cost of if-then-else branches.
Closes#3680
Tested by:
$ ./db_bench -benchmarks=fillrandom -db /dev/shm/rocksdb-tmpdb --num=1000000 -bloom_bits=10
$ ./db_bench -benchmarks="readwhilewriting" -db /dev/shm/rocksdb-tmpdb --statistics -bloom_bits=10 --duration=60 --num=2000000 --use_existing_db 2>&1 > /tmp/full.log
$ grep filter.full /tmp/full.log
rocksdb.bloom.filter.full.positive COUNT : 3628593
rocksdb.bloom.filter.full.true.positive COUNT : 3536026
which gives the false positive rate of 2.5%
Closes https://github.com/facebook/rocksdb/pull/3681
Differential Revision: D7517570
Pulled By: maysamyabandeh
fbshipit-source-id: 630ab1a473afdce404916d297035b6318de4c052
Summary:
Clock cache should check if deleter is nullptr before calling it.
Closes https://github.com/facebook/rocksdb/pull/3677
Differential Revision: D7493602
Pulled By: yiwu-arbug
fbshipit-source-id: 4f94b188d2baf2cbc7c0d5da30fea1215a683de4
Summary:
Primitive types constness does not affect the signature of the
method and has no influence on whether the overriding method would
actually have that const bool instead of just bool. In addition,
it is rarely useful but does produce a compatibility warnings
in VS 2015 compiler.
Closes https://github.com/facebook/rocksdb/pull/3663
Differential Revision: D7475739
Pulled By: ajkr
fbshipit-source-id: fb275378b5acc397399420ae6abb4b6bfe5bd32f
Summary:
Make blob_dump tool able to show uncompressed values if the blob file is compressed. Also show total compressed vs. raw size at the end if --show_summary is provided.
Closes https://github.com/facebook/rocksdb/pull/3633
Differential Revision: D7348926
Pulled By: yiwu-arbug
fbshipit-source-id: ca709cb4ed5cf6a550ff2987df8033df81516f8e
Summary:
currently rocksdb lite build fails due to the following errors:
> db/db_sst_test.cc:29:51: error: ‘FlushJobInfo’ does not name a type
virtual void OnFlushCompleted(DB* /*db*/, const FlushJobInfo& info) override {
^
db/db_sst_test.cc:29:16: error: ‘virtual void rocksdb::FlushedFileCollector::OnFlushCompleted(rocksdb::DB*, const int&)’ marked ‘override’, but does not override
virtual void OnFlushCompleted(DB* /*db*/, const FlushJobInfo& info) override {
^
db/db_sst_test.cc:24:7: error: ‘class rocksdb::FlushedFileCollector’ has virtual functions and accessible non-virtual destructor [-Werror=non-virtual-dtor]
class FlushedFileCollector : public EventListener {
^
db/db_sst_test.cc: In member function ‘virtual void rocksdb::FlushedFileCollector::OnFlushCompleted(rocksdb::DB*, const int&)’:
db/db_sst_test.cc:31:35: error: request for member ‘file_path’ in ‘info’, which is of non-class type ‘const int’
flushed_files_.push_back(info.file_path);
^
cc1plus: all warnings being treated as errors
make: *** [db/db_sst_test.o] Error 1
Closes https://github.com/facebook/rocksdb/pull/3676
Differential Revision: D7493006
Pulled By: miasantreble
fbshipit-source-id: 77dff0a5b23e27db51be9b9798e3744e6fdec64f
Summary:
Ttl-triggered and snapshot-release-triggered compactions should not be considered as manual compactions. This is a bug.
Closes https://github.com/facebook/rocksdb/pull/3678
Differential Revision: D7498151
Pulled By: sagar0
fbshipit-source-id: a2d5bed05268a4dc93d54ea97a9ae44b366df15d
Summary:
This change models Optimistic Tx db after Pessimistic TX db. The motivation for this change is to make the ptr polymorphic so it can be held by the same raw or smart ptr.
Currently, due to the inheritance of the Opt Tx db not being rooted in the manner of Pess Tx from a single DB root it is more difficult to write clean code and have clear ownership of the database in cases when options dictate instantiate of plan DB, Pess Tx DB or Opt tx db.
Closes https://github.com/facebook/rocksdb/pull/3566
Differential Revision: D7184502
Pulled By: yiwu-arbug
fbshipit-source-id: 31d06efafd79497bb0c230e971857dba3bd962c3
Summary:
Previously `python tools/db_crashtest.py blackbox` would do no useful work as the crash interval (two minutes) was shorter than the preparation phase. The preparation phase is slow because of the ridiculously inefficient way it computes which keys should not be overwritten. It was doing this for 60M keys since default values were `FLAGS_nooverwritepercent == 60` and `FLAGS_max_key == 100000000`.
Move the "nooverwritepercent" override from whitebox-specific to the general options so it also applies to blackbox test runs. Now preparation phase takes a few seconds.
Closes https://github.com/facebook/rocksdb/pull/3671
Differential Revision: D7457732
Pulled By: ajkr
fbshipit-source-id: 601f4461a6a7e49e50449dcf15aebc9b8a98d6f0
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
The introduction of the 3-way SSE4.2 optimized crc32c implementation in commit f54d7f5fea added the `HAVE_PCLMUL` definition when the compiler supports intrinsics for that instruction, but did not modify CMakeLists.txt to set that definition on MSVC when appropriate. As a result, 3-way SSE4.2 is not used in MSVC builds with CMake although it could be.
Since the existing test program in CMakeLists.txt for `HAVE_SSE42` already uses `_mm_clmulepi64_si128` which is a PCLMUL instruction, this PR sets `HAVE_PCLMUL` as well if that program builds successfully, fixing the problem.
Closes https://github.com/facebook/rocksdb/pull/3673
Differential Revision: D7473975
Pulled By: miasantreble
fbshipit-source-id: bc346b9eb38920e427aa1a253e6dd9811efa269e
Summary:
The is an optimization to reduce lookup in the CommitCache when querying IsInSnapshot. The optimization takes the smallest uncommitted data at the time that the snapshot was taken and if the sequence number of the read data is lower than that number it assumes the data as committed.
To implement this optimization two changes are required: i) The AddPrepared function must be called sequentially to avoid out of order insertion in the PrepareHeap (otherwise the top of the heap does not indicate the smallest prepare in future too), ii) non-2PC transactions also call AddPrepared if they do not commit in one step.
Closes https://github.com/facebook/rocksdb/pull/3649
Differential Revision: D7388630
Pulled By: maysamyabandeh
fbshipit-source-id: b79506238c17467d590763582960d4d90181c600
Summary:
Manual compactions should be cancelled, just like scheduled compactions are cancelled, if sfm->EnoughRoomForCompaction is not true.
Closes https://github.com/facebook/rocksdb/pull/3670
Differential Revision: D7457683
Pulled By: amytai
fbshipit-source-id: 669b02fdb707f75db576d03d2c818fb98d1876f5
Summary:
Some flags used via make were not applied in the buckifier/targets file, causing some failures to be missed by testing infra ( ie the one fixed by #3434 )
Closes https://github.com/facebook/rocksdb/pull/3452
Differential Revision: D7457419
Pulled By: gfosco
fbshipit-source-id: e4aed2915ca3038c1485bbdeebedfc33d5704a49
Summary:
This was failing the build on windows with zstd, warning treated as an error, 32-bit shift implicitly converted to 64-bit.
Closes https://github.com/facebook/rocksdb/pull/3624
Differential Revision: D7307883
Pulled By: gfosco
fbshipit-source-id: 68110e9b5b1b59b668dec6cf86b67556402574e7
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488
Differential Revision: D6967893
Pulled By: maysamyabandeh
fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
Summary:
When using two_write_queue, the published seq and the last allocated sequence could be ahead of the LastSequence, even if both write queues are stopped as in WriteRecoverableState. The patch fixes a bug in WriteRecoverableState in which LastSequence was used as a reference but the result was applied to last fetched sequence and last published seq.
Closes https://github.com/facebook/rocksdb/pull/3665
Differential Revision: D7446099
Pulled By: maysamyabandeh
fbshipit-source-id: 1449bed9aed8e9db6af85946efd347cb8efd3c0b
Summary:
Currently if the CommitTimeWriteBatch is set to be used only as a state that is required only for recovery , the user cannot see that in DB until it is restarted. This while the state is already inserted into the DB after the memtable flush. It would be useful for debugging if make this state visible to the user after the flush by committing it. The patch does it by a invoking a callback that does the commit on the recoverable state.
Closes https://github.com/facebook/rocksdb/pull/3661
Differential Revision: D7424577
Pulled By: maysamyabandeh
fbshipit-source-id: 137f9408662f0853938b33fa440f27f04c1bbf5c
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
Updated comments around AllowSingleOperand.
Reason: A couple of users were confused and encountered issues due to no overriding PartialMerge with AllowSingleOperand=true.
I'll also look into modifying the default merge operator implementation so that overriding PartialMerge is not mandatory when AllowSingleOp=true.
Closes https://github.com/facebook/rocksdb/pull/3659
Differential Revision: D7422691
Pulled By: sagar0
fbshipit-source-id: 3d075a6ced0120f5d65cb7ae5412936f1862f342
Summary:
Our valgrind continuous test found an interesting leak which got introduced in #3614. We were adding the prefix key before saving the previous prefix start offset, due to which previous prefix offset is always incorrect. Fixed it by saving the the previous sate before adding the key.
Closes https://github.com/facebook/rocksdb/pull/3660
Differential Revision: D7418698
Pulled By: sagar0
fbshipit-source-id: 9933685f943cf2547ed5c553f490035a2fa785cf
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
Current commit cache size is 2^21. This was due to a type. With 2^23 commit entries we can have transactions as long as 64s without incurring the cost of having them evicted from the commit cache before their commit. Here is the math:
2^23 / 2 (one out of two seq numbers are for commit) / 2^16 TPS = 2^6 = 64s
Closes https://github.com/facebook/rocksdb/pull/3657
Differential Revision: D7411211
Pulled By: maysamyabandeh
fbshipit-source-id: e7cacf40579f3acf940643d8a1cfe5dd201caa35
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
I found that each instance of MySQLStyleTransactionTest.TransactionStressTest/x is taking more than 10 hours to complete on our continuous testing environment, causing the whole valgrind run to timeout after a day. So excluding these tests.
Closes https://github.com/facebook/rocksdb/pull/3652
Differential Revision: D7400332
Pulled By: sagar0
fbshipit-source-id: 987810574506d01487adf7c2de84d4817ec3d22d
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Maysam Yabandeh