Summary:
In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic.
This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code.
gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper.
Also refactored some related test code to share common code / functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D44101453
Pulled By: pdillinger
fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
Adds unit tests verifying that a block payload and checksum of all zeros is not falsely considered valid data. The test exhaustively checks that for blocks up to some length (default 20K, more exhaustively 10M) of all zeros do not produce a block checksum of all zeros.
Also small refactoring of an existing checksum test to use parameterized test. (Suggest hiding whitespace changes for review.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11260
Test Plan:
this is the test, manual run with
`ROCKSDB_THOROUGH_CHECKSUM_TEST=1` to verify up to 10M.
Reviewed By: hx235
Differential Revision: D43706192
Pulled By: pdillinger
fbshipit-source-id: 95e721c320ca928e7fa2400c2570fb359cc30b1f
Summary:
This makes it possible to eliminate some copies in `GetEntity` / `MultiGetEntity`,
in particular when `Merge`s or blobs are involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11248
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43544215
Pulled By: ltamasi
fbshipit-source-id: bc4c8955a24bbd8bc4ab098e72133ead757f9707
Summary:
A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)).
The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113
Test Plan:
* added unit test in db_range_del_test
* crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10`
Reviewed By: ajkr
Differential Revision: D42655709
Pulled By: cbi42
fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions.
This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231
Test Plan: updated unit test
Reviewed By: akankshamahajan15
Differential Revision: D43396607
Pulled By: ajkr
fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.
Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43256950
Pulled By: ltamasi
fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
Summary:
The files in `port/`, such as `port_posix.h`, are layering over the system libraries, so shouldn't include the DB-specific files like `options.h`. This PR remove this dependency.
# How
The reason that `port_posix.h` (or `port_win.h`) include `options.h` is to use `CpuPriority`, as there is a method `SetCpuPriority()` in `port_posix.h` that uses `CpuPriority.`
- I think `SetCpuPriority()` make sense to exist in `port_posix.h` as it provides has platform-dependent implementation
- `CpuPriority` enum is defined in `env.h`, but used in `rocksdb/include` and `port/`.
Hence, let us define `CpuPriority` enum in a common file, say `port_defs.h`, such that both directories `rocksdb/include` and `port/` can include.
When we remove this dependency, some other files have compile errors because they can't find definitions, so add header files to resolve
# Test
make all check -j
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11214
Reviewed By: pdillinger
Differential Revision: D43196910
Pulled By: guowentian
fbshipit-source-id: 70deccb72844cfb08fcc994f76c6ef6df5d55ab9
Summary:
The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment.
In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544
Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it.
Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192
Test Plan: `make check`
Reviewed By: anand1976
Differential Revision: D43055487
Pulled By: pdillinger
fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
Summary:
**Context/Summary:**
As instructed by convenience.h comments, a few deprecated APIs are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120
Test Plan:
- make check & CI
- eyeball check on test semantics.
Reviewed By: pdillinger
Differential Revision: D42937507
Pulled By: hx235
fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1
Summary:
Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller.
Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105
Test Plan:
make V=1 db_blob_basic_test
./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*"
Reviewed By: ltamasi
Differential Revision: D42716487
Pulled By: jowlyzhang
fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Like other versions before, gcc 13 moved some includes around and as a result <cstdint> is no longer transitively included [1]. Explicitly include it for uint{32,64}_t.
[1] https://gcc.gnu.org/gcc-13/porting_to.html#header-dep-changes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11118
Reviewed By: cbi42
Differential Revision: D42711356
Pulled By: ajkr
fbshipit-source-id: 5ea257b85b7017f40fd8fdbce965336da95c55b2
Summary:
Compressed block cache is replaced by compressed secondary cache. Remove the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117
Test Plan: See CI passes
Reviewed By: pdillinger
Differential Revision: D42700164
fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d
Summary:
Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage.
To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092
Reviewed By: siying
Differential Revision: D42525673
Pulled By: ajkr
fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee
Summary:
`InternalIteratorBase::is_mutable_` is not used any more, remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11104
Reviewed By: ajkr
Differential Revision: D42582747
Pulled By: cbi42
fbshipit-source-id: d30bf75151fc8414df0ae112a6ec4943b5b7330b
Summary:
This reverts commit f02c708aa3 since it introduced several bugs (see https://github.com/facebook/rocksdb/issues/11078 and https://github.com/facebook/rocksdb/issues/11067 for attempts to fix them) and that I do not have a high confidence to fix all of them and ensure no further ones before the next release branch cut. There are also come existing issue found during bug fixing. We will work on it and try to merge it to the release after.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11089
Test Plan: existing CI.
Reviewed By: ajkr
Differential Revision: D42505972
Pulled By: cbi42
fbshipit-source-id: 2f66dcde6b85dc94977b317c2ce513872cfbc153
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).
The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.
* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)
## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
* Simpler for implementations to deal with just one Insert and one Lookup.
* Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
* Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
* Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
* It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
* I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.
## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).
The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.
These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)
Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.
## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.
## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.
The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.
## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)
## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975
Test Plan:
tests updated
Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):
34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83
Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.
Reviewed By: anand1976
Differential Revision: D42417818
Pulled By: pdillinger
fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
Summary:
Reading uncompression dict block always uses sync reads, while data blocks may use async reads and prefetching. This causes problems in FilePrefetchBuffer. So avoid mixing the two by reading the uncompression dict straight from the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11050
Test Plan: Crash test
Reviewed By: akankshamahajan15
Differential Revision: D42194682
Pulled By: anand1976
fbshipit-source-id: aaa8b396fdfe966b157e210f5ef8501c45b7b69e
Summary:
This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802
Test Plan:
- added unit tests in db_range_del_test.
- stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000`
Reviewed By: ajkr, jay-zhuang
Differential Revision: D40308827
Pulled By: cbi42
fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df
Summary:
Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure:
* Magic number error is reported first if we attempt to open an SST file and the footer is completely bad.
* Footer errors are reported with affected file.
* If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009
Test Plan:
unit tests added, some manual
Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed).
Reviewed By: siying
Differential Revision: D41656272
Pulled By: pdillinger
fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df
Summary:
In MergingIterator, if a range tombstone's start or end key is added to minHeap/maxHeap, the key is copied. This PR removes the copying of range tombstone keys by adding InternalKey comparator that compares `Slice` for internal key and `ParsedInternalKey` directly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10878
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmarks: I did not get improvement when compiling with DEBUG_LEVEL=0, and saw many noise. With `OPTIMIZE_LEVEL="-O3" USE_LTO=1` I do see improvement.
```
# Favorable set up: half of the writes are DeleteRange.
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=1000000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=50
# benchmark command
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --disable_auto_compactions=true --avoid_flush_during_recovery=true --seek_nexts=100 --reads=1000000 --num=1000000 --threads=25
# main
readseq [AVG 5 runs] : 26017977 (± 371077) ops/sec; 3721.9 (± 53.1) MB/sec
readseq [MEDIAN 5 runs] : 26096905 ops/sec; 3733.2 MB/sec
# this PR
readseq [AVG 5 runs] : 27481724 (± 568758) ops/sec; 3931.3 (± 81.4) MB/sec
readseq [MEDIAN 5 runs] : 27323957 ops/sec; 3908.7 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40711170
Pulled By: cbi42
fbshipit-source-id: 708cb584e2bd085a9ce0d2ef6a420489f721717f
Summary:
Currently, `iterate_upper_bound` is not checked for range tombstone keys in MergingIterator. This may impact performance when there is a large number of range tombstones right after `iterate_upper_bound`. This PR fixes this issue by checking `iterate_upper_bound` in MergingIterator for range tombstone keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10966
Test Plan:
- added unit test
- stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=18 --writepercent=48 --readpercen=15 --duration=36000 --range_deletion_width=100`
- ran different stress tests over sandcastle
- Falcon team ran some test traffic and saw reduced CPU usage on processing range tombstones.
Reviewed By: ajkr
Differential Revision: D41414172
Pulled By: cbi42
fbshipit-source-id: 9b2c29eb3abb99327c6a649bdc412e70d863f981
Summary:
Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom!
This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed.
Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache.
This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944
Test Plan: test added that fails on base revision (at least with ASAN)
Reviewed By: akankshamahajan15
Differential Revision: D41205578
Pulled By: pdillinger
fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f
Summary:
The patch refines/reworks `MergeHelper::TimedFullMerge(WithEntity)`
a bit in two ways. First, it eliminates the recently introduced `TimedFullMerge`
overload, which makes the responsibilities clearer by making sure the query
result (`value` for `Get`, `columns` for `GetEntity`) is set uniformly in
`SaveValue` and `GetContext`. Second, it changes the interface of
`TimedFullMergeWithEntity` so it exposes its result in a serialized form; this
is a more decoupled design which will come in handy when adding support
for `Merge` with wide-column entities to `DBIter`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10932
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D41129399
Pulled By: ltamasi
fbshipit-source-id: 69d8da358c77d4fc7e8c40f4dafc2c129a710677
Summary:
The patch fixes a bug where `GetContext::Merge` (and `MergeEntity`) does not update the ticker `READ_NUM_MERGE_OPERANDS` because it implicitly uses the default parameter value of `update_num_ops_stats=false` when calling `MergeHelper::TimedFullMerge`. Also, to prevent such issues going forward, the PR removes the default parameter values from the `TimedFullMerge` methods. In addition, it removes an unused/unnecessary parameter from `TimedFullMergeWithEntity`, and does some cleanup at the call sites of these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10925
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41096453
Pulled By: ltamasi
fbshipit-source-id: fc60646d32b4d516b8fe81e265c3f020a32fd7f8
Summary:
The patch adds `Merge` support for wide-column entities to the point lookup
APIs, i.e. `Get`, `MultiGet`, `GetEntity`, and `GetMergeOperands`. (I plan to
update the iterator and compaction logic in separate PRs.) In terms of semantics,
the `Merge` operation is applied to the default (anonymous) column; any other
columns in the entity are unaffected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10916
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40962311
Pulled By: ltamasi
fbshipit-source-id: 244bc9d172be1af2f204796b2f89104e4d2fa373
Summary:
This PR implements the originally disabled `Merge()` APIs when user-defined timestamp is enabled.
Simplest usage:
```cpp
// assume string append merge op is used with '.' as delimiter.
// ts1 < ts2
db->Put(WriteOptions(), "key", ts1, "v0");
db->Merge(WriteOptions(), "key", ts2, "1");
ReadOptions ro;
ro.timestamp = &ts2;
db->Get(ro, "key", &value);
ASSERT_EQ("v0.1", value);
```
Some code comments are added for clarity.
Note: support for timestamp in `DB::GetMergeOperands()` will be done in a follow-up PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10819
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40603195
Pulled By: riversand963
fbshipit-source-id: f96d6f183258f3392d80377025529f7660503013
Summary:
Currently, a memtable's stats `num_deletes_` is incremented only if the entry is a regular delete (kTypeDeletion). We need to fix it by accounting for kTypeSingleDeletion and kTypeDeletionWithTimestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10886
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40740754
Pulled By: riversand963
fbshipit-source-id: 7bde62cd6df136585bc5bfb1c426c7a8276c08e1
Summary:
The for loop is marked as unreachable code because it will never call the increment. Switch it to `if`.
```
\table\merging_iterator.cc(823): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(823): warning C4702: unreachable code
\table\merging_iterator.cc(1030): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(1030): warning C4702: unreachable code
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10897
Reviewed By: cbi42
Differential Revision: D40811790
Pulled By: jay-zhuang
fbshipit-source-id: fe8fd3e7cf3d6f710360c402b79763854d5120df
Summary:
The PR fixes the handling of `Merge`s in `GetEntity`. Note that `Merge` is not yet
supported for wide-column entities written using `PutEntity`; this change is
about returning correct (i.e. consistent with `Get`) results in cases like when the
base value is a plain old key-value written using `Put` or when there is no real base
value because we hit either a tombstone or the beginning of history.
Implementation-wise, the patch introduces a new wrapper around the existing
`MergeHelper::TimedFullMerge` that can store the merge result in either a string
(for the purposes of `Get`) or a `PinnableWideColumns` instance (for `GetEntity`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10894
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40782708
Pulled By: ltamasi
fbshipit-source-id: 3d700d56b2ef81f02ba1e2d93f6481bf13abcc90
Summary:
Right now in MergingIterator, for each range tombstone start and end key, we pop one end from heap and push the other end into the heap. This involves extra downheap and upheap cost. In the likely cases when a range tombstone iterator emits relatively adjacent keys, these keys should have similar order within all keys in the heap. This can happen when there is a burst of consecutive range tombstones, and most of the keys covered by them are dropped already. This PR uses `replace_top()` when inserting new range tombstone keys, which is more efficient in these common cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10877
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmark:
```
# Set up: --writes_per_range_tombstone=1 means one point write and one delete range
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=100000000 --writes=800000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=64
Level Files Size(MB)
--------------------
0 8 152
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
# Benchmark
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone/ ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --num=100000000 --reads=1000000 --disable_auto_compactions=true --avoid_flush_during_recovery=true
# Pre PR
readseq [AVG 5 runs] : 1432116 (± 59664) ops/sec; 224.0 (± 9.3) MB/sec
readseq [MEDIAN 5 runs] : 1454886 ops/sec; 227.5 MB/sec
# Post PR
readseq [AVG 5 runs] : 1944425 (± 29521) ops/sec; 304.1 (± 4.6) MB/sec
readseq [MEDIAN 5 runs] : 1959430 ops/sec; 306.5 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40710936
Pulled By: cbi42
fbshipit-source-id: cb782fb9cdcd26c0c3eb9443215a4ef4d2f79022
Summary:
Add some extra information in outputs of "sst_dump --command=raw" to help debug some issues. Right now, encoded block handle is printed out. It is more useful to directly print out offset and size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10873
Test Plan: Manually run it against a file and check the output.
Reviewed By: anand1976
Differential Revision: D40742289
fbshipit-source-id: 04d7de26e7f27e1595a7cc3ac1c1082e4e835b93
Summary:
FragmentedRangeTombstoneList has a member variable `seq_set_` that contains the sequence numbers of all range tombstones in a set. The set is constructed in `FragmentTombstones()` and is used only in `FragmentedRangeTombstoneList::ContainsRange()` which only happens during compaction. This PR moves the initialization of `seq_set_` to `FragmentedRangeTombstoneList::ContainsRange()`. This should speed up `FragmentTombstones()` when the range tombstone list is used for read/scan requests. Microbench shows the speed improvement to be ~45%.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10848
Test Plan:
- Existing tests and stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5`.
- Microbench: update `range_del_aggregator_bench` to benchmark speed of `FragmentTombstones()`:
```
./range_del_aggregator_bench --num_range_tombstones=1000 --tombstone_start_upper_bound=50000000 --num_runs=10000 --tombstone_width_mean=200 --should_deletes_per_run=100 --use_compaction_range_del_aggregator=true
Before this PR:
=========================
Fragment Tombstones: 270.286 us
AddTombstones: 1.28933 us
ShouldDelete (first): 0.525528 us
ShouldDelete (rest): 0.0797519 us
After this PR: time to fragment tombstones is pushed to AddTombstones() which only happen during compaction.
=========================
Fragment Tombstones: 149.879 us
AddTombstones: 102.131 us
ShouldDelete (first): 0.565871 us
ShouldDelete (rest): 0.0729444 us
```
- db_bench: this should improve speed for fragmenting range tombstones for mutable memtable:
```
./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=100 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=250000 --disable_auto_compactions --max_num_range_tombstones=100000 --finish_after_writes --write_buffer_size=1073741824 --threads=25
Before this PR:
readwhilewriting : 18.301 micros/op 1310445 ops/sec 4.769 seconds 6250000 operations; 28.1 MB/s (41001 of 250000 found)
After this PR:
readwhilewriting : 16.943 micros/op 1439376 ops/sec 4.342 seconds 6250000 operations; 23.8 MB/s (28977 of 250000 found)
```
Reviewed By: ajkr
Differential Revision: D40646227
Pulled By: cbi42
fbshipit-source-id: ea471667edb258f67d01cfd828588e80a89e4083
Summary:
`#include "db/range_tombstone_fragmenter.h"` seems to break some internal test for 7.8 release. I'm removing it from sst_file_reader.h for now to unblock release. This should be fine as it is only used in a unit test for DeleteRange with timestamp. In addition, it does not seem to be useful to support delete range for sst file writer, since the range tombstone won't cover any key (its sequence number is 0). So maybe we can remove it in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10847
Test Plan: CI.
Reviewed By: akankshamahajan15
Differential Revision: D40620865
Pulled By: cbi42
fbshipit-source-id: be44b2f31e062bff87ed1b8d94482c3f7eaa370c
Summary:
Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter.
`DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`.
New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer.
This same philosophy can be applied to KV and IO tracing as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811
Test Plan:
existing unit tests
Old API DB::StartBlockTrace checked with db_bench tool
create database
```
./db_bench --benchmarks="fillseq" \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000
```
To trace block cache accesses when running readrandom benchmark:
```
./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \
--threads=16 \
-block_cache_trace_file="/tmp/binary_trace_test_example" \
-block_cache_trace_max_trace_file_size_in_bytes=1073741824 \
-block_cache_trace_sampling_frequency=1
```
Reviewed By: anand1976
Differential Revision: D40435289
Pulled By: akankshamahajan15
fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
Summary:
The motivations for this change include
* Free up space in ClockHandle so that we can add data for secondary cache handling while still keeping within single cache line (64 byte) size.
* This change frees up space by eliminating the need for the `hash` field by making the fixed-size key itself a hash, using a 128-bit bijective (lossless) hash.
* Generally more customizability of ShardedCache (such as hashing) without worrying about virtual call overheads
* ShardedCache now uses static polymorphism (template) instead of dynamic polymorphism (virtual overrides) for the CacheShard. No obvious performance benefit is seen from the change (as mostly expected; most calls to virtual functions in CacheShard could already be optimized to static calls), but offers more flexibility without incurring the runtime cost of adhering to a common interface (without type parameters or static callbacks).
* You'll also notice less `reinterpret_cast`ing and other boilerplate in the Cache implementations, as this can go in ShardedCache.
More detail:
* Don't have LRUCacheShard maintain `std::shared_ptr<SecondaryCache>` copies (extra refcount) when LRUCache can be in charge of keeping a `shared_ptr`.
* Renamed `capacity_mutex_` to `config_mutex_` to better represent the scope of what it guards.
* Some preparation for 64-bit hash and indexing in LRUCache, but didn't include the full change because of slight performance regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10801
Test Plan:
Unit test updates were non-trivial because of major changes to the ClockCacheShard interface in handling of key vs. hash.
Performance:
Create with `TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16`
Test with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X1000] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=610000000 -duration 20 -threads=16
```
Before: `readrandom [AVG 150 runs] : 321147 (± 253) ops/sec`
After: `readrandom [AVG 150 runs] : 321530 (± 326) ops/sec`
So possibly ~0.1% improvement.
And with `-cache_type=hyper_clock_cache`:
Before: `readrandom [AVG 30 runs] : 614126 (± 7978) ops/sec`
After: `readrandom [AVG 30 runs] : 645349 (± 8087) ops/sec`
So roughly 5% improvement!
Reviewed By: anand1976
Differential Revision: D40252236
Pulled By: pdillinger
fbshipit-source-id: ff8fc70ef569585edc95bcbaaa0386f61355ae5b
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
Currently, without this fix, DBImpl::GetLatestSequenceForKey() may not return the latest sequence number for merge operands of the key. This can cause conflict checking during optimistic transaction commit phase to fail. Fix it by always returning the latest sequence number of the key, also considering range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10724
Test Plan: make check
Reviewed By: cbi42
Differential Revision: D39756847
Pulled By: riversand963
fbshipit-source-id: 0764c3dd4cb24960b37e18adccc6e7feed0e6876
Peter Dillinger
