Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
Existing API `VerifyChecksum()` allows application to verify sst files' block checksums.
Since whole file, user-specified checksum is tracked in MANIFEST, we can expose a new
API to verify sst files' file checksums.
```
// Compute table file checksums if applicable and compare with MANIFEST.
// Returns OK if no file has mismatching whole-file checksum.
Status DB::VerifyFileChecksums(const ReadOptions& /*read_options*/);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7578
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24436783
Pulled By: riversand963
fbshipit-source-id: 52b51519b842f2b3c4e3351998a97c86cbec85b3
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s.
The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256
Test Plan: a set of unit tests are added in `version_set_test.cc`
Reviewed By: riversand963
Differential Revision: D23123238
Pulled By: cheng-chang
fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
Remove function calling in assert statement as assert is a no
op in opt build and that function might not be called. This causes hang
in closing RocksDB when refit level is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7581
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D24466420
Pulled By: akankshamahajan15
fbshipit-source-id: 97db4ec5a95ae693c3290e176a3c12a9b1ad2f6d
Summary:
Make LoadLatestOptions return PathNotFound if the options file does not exist. Added tests for the LoadOptions related methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7554
Reviewed By: akankshamahajan15
Differential Revision: D24298985
Pulled By: zhichao-cao
fbshipit-source-id: c9ae3cb12fc4a5bbef07743e1c1300f98a2441b3
Summary:
Added unit tests that have paranoid_check = true that perform range deletions. At the moment, the deleted ranges do not appear to be checked as part of the paranoid checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7521
Reviewed By: zhichao-cao
Differential Revision: D24262175
Pulled By: ajkr
fbshipit-source-id: 1035e968f7ab8ccaa7af086b835a4e72c7e56743
Summary:
If `BottommostLevelCompaction.kForce*` is set, compaction should avoid
trivial move and always compact the sst to the target size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7368
Reviewed By: ajkr
Differential Revision: D23629525
Pulled By: jay-zhuang
fbshipit-source-id: 79f23c79ecb31587e0593b28cce43131107bbcd0
Summary:
`BeginWriteStall()` removes no_slowdown write from the write
list and updates `link_newer`, which makes `CreateMissingNewerLinks()`
thought all write list has valid `link_newer` and failed to create link
for all writers.
It caused flaky test and SegFault for release build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7508
Test Plan: Add unittest to reproduce the issue.
Reviewed By: anand1976
Differential Revision: D24126601
Pulled By: jay-zhuang
fbshipit-source-id: f8ac5dba653f7ee1b0950296427d4f5f8ee34a06
Summary:
This PR schedules a background thread (shared across all DB instances)
to flush info log every ten seconds. This improves debuggability in case
of RocksDB hanging since it ensures the log messages leading up to the hang
will eventually become visible in the log.
The bulk of this PR is moving monitoring/stats_dump_scheduler* to db/periodic_work_scheduler*
and making the corresponding name changes since now the scheduler handles info
log flushing, not just stats dumping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7488
Reviewed By: riversand963
Differential Revision: D24065165
Pulled By: ajkr
fbshipit-source-id: 339c47a0ff43b79fdbd055fbd9fefbb6f9d8d3b5
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Possible fix for a TSAN issue reported in EnableFileDeletions.
disable_delete_obsolete_files_ should only be accessed holding the db
mutex, but for logging it was being accessed outside holding the mutex,
now fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7435
Test Plan: existing tests, watch for recurrence
Reviewed By: ltamasi
Differential Revision: D23917578
Pulled By: pdillinger
fbshipit-source-id: 8573025bca3f6fe169b24b87bbfc4ce9667b0482
Summary:
Fix few test cases and add them in ASSERT_STATUS_CHECKED build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7427
Test Plan:
1. ASSERT_STATUS_CHECKED=1 make -j48 check,
2. travis build for ASSERT_STATUS_CHECKED,
3. Without ASSERT_STATUS_CHECKED: make check -j64, CircleCI build and travis build
Reviewed By: pdillinger
Differential Revision: D23909983
Pulled By: akankshamahajan15
fbshipit-source-id: 42d7e4aea972acb9fcddb7ca73fcb82f93272434
Summary:
Implement a parsing tool io_tracer_parser that takes IO trace file (binary file) with command line argument --io_trace_file and output file with --output_file and dumps the IO trace records in outputfile in human readable form.
Also added unit test cases that generates IO trace records and calls io_tracer_parse to parse those records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7333
Test Plan:
make check -j64,
Add unit test cases.
Reviewed By: anand1976
Differential Revision: D23772360
Pulled By: akankshamahajan15
fbshipit-source-id: 9c20519c189362e6663352d08863326f3e496271
Summary:
Current implementation holds db mutex while calling
`GetAggregatedIntProperty()`. For property kEstimateTableReadersMem,
this can be expensive, especially if the number of table readers is
high.
We can release and re-acquire db mutex if
property_info.need_out_of_mutex is true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7412
Test Plan:
make check
COMPILE_WITH_ASAN=1 make check
COMPILE_WITH_TSAN=1 make check
Also test internally on a shadow host. Used bpf to verify the
excessively long db mutex holding no longer exists when applications
call GetApproximateMemoryUsageByType().
Reviewed By: jay-zhuang
Differential Revision: D23794824
Pulled By: riversand963
fbshipit-source-id: 6bc02a59fd25613d343a62cf817467c7122c9721
Summary:
In the current implementation, any retryable IO error happens during Flush is mapped to a hard error. In this case, DB is stopped and write is stalled unless the background error is cleaned. In this PR, if WAL is DISABLED, the retryable IO error during FLush is mapped to a soft error. Such that, the memtable can continue receive the writes. At the same time, if auto resume is triggered, SwtichMemtable will not be called during Flush when resuming the DB to avoid to many small memtables. Testing cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7310
Test Plan: adding new unit test, pass make check.
Reviewed By: anand1976
Differential Revision: D23710892
Pulled By: zhichao-cao
fbshipit-source-id: bc4ca50d11c6b23b60d2c0cb171d86d542b038e9
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
The patch adds support for extracting large values into blob files when
performing a flush during recovery (when `avoid_flush_during_recovery` is
`false`). Blob files are built and added to the `Version` similarly to flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7388
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23709912
Pulled By: ltamasi
fbshipit-source-id: ce48b4227849cf25429ae98574e72b0e1cb9c67d
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345
Test Plan: Tested using `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D23506369
Pulled By: ltamasi
fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
In a distributed file system, directory ownership is enforced by fencing
off the previous owner once they've been preempted by a new owner. This
PR adds a IOStatus subcode for ```StatusCode::IOError``` to indicate this.
Once this error is returned for a file write, the DB is put in read-only
mode and not allowed to resume in read-write mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7374
Test Plan: Add new unit tests in ```error_handler_fs_test```
Reviewed By: riversand963
Differential Revision: D23687777
Pulled By: anand1976
fbshipit-source-id: bef948642089dc0af399057864d9a8ca339e8b2f
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
object in WritableFileWriter.
This new object wraps FSWritableFile pointer.
Objective: If tracing is enabled, FSWritableFile Ptr returns
FSWritableFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSWritableFilePtr wrapper class is added to bypass the
FSWritableFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193
Reviewed By: anand1976
Differential Revision: D23355915
Pulled By: akankshamahajan15
fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
When a memtable is trimmed in MemTableListVersion, the memtable
is only added to delete list if it is
the last reference. However it is not the last reference as it is held
by the super version. But the super version would not be switched if the
delete list is empty. So the memtable is never destroyed and memory
usage increases beyond write_buffer_size +
max_write_buffer_size_to_maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7296
Test Plan:
1. ./db_bench -benchmarks=randomtransaction
-optimistic_transaction_db=1 -statistics -stats_interval_seconds=1
-duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000
--transaction_set_snapshot
Reviewed By: ltamasi
Differential Revision: D23267395
Pulled By: akankshamahajan15
fbshipit-source-id: 3a8d437fe9f4015f851ff84c0e29528aa946b650
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
This diff contains following changes:
1. Replace `FSSequentialFile` pointer with `FSSequentialFilePtr` object that wraps `FSSequentialFile` pointer in `SequenceFileReader`.
Objective: If tracing is enabled, `FSSequentialFilePtr` returns `FSSequentialFileTracingWrapper` pointer that includes all necessary information in `IORecord` and calls underlying FileSystem and invokes `IOTracer` to dump that record in a binary file. If tracing is disabled then, underlying `FileSystem` pointer is returned directly. `FSSequentialFilePtr` wrapper class is added to bypass the `FSSequentialFileTracingWrapper` when tracing is disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7190
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D23059616
Pulled By: akankshamahajan15
fbshipit-source-id: 1564b94dd1297cd0fbfe2ed5c9cc3e20f7395301
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
The two features are naturally incompatible. WAL recycling expects the recovery to succeed upon encountering a corrupt record at the point where new data ends and recycled data remains at the tail. However, `WALRecoveryMode::kTolerateCorruptedTailRecords` must fail upon encountering any such corrupt record, as it cannot differentiate between this and a real corruption, which would cause committed updates to be truncated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7271
Reviewed By: riversand963
Differential Revision: D23169923
Pulled By: ajkr
fbshipit-source-id: 2cf8a3bcd2c9a0ecb0055a84725047a10fd4db50
Summary:
There is potential data race related CompactRange() with level refitting. After the compaction step and refitting step, some automatic compaction could put data to the destination level and cause the DB to be corrupted. Fix the bug by checking the target level to be empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7261
Test Plan: Add a unit test, which would fail with "Corruption: L1 have overlapping ranges '666F6F' seq:6, type:1 vs. '626172' seq:2, type:1", and now it succeeds.
Reviewed By: ajkr
Differential Revision: D23142269
fbshipit-source-id: 28bc14d5ac934c192260b23a4ce3f10a95e3ee91
Cheng Chang