Tag:
Branch:
Tree:
efd035164b
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
4823 Commits (efd035164b443e0ae552a82ad8b47a8048e652ca)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Dillinger
|
efd035164b |
Meta-internal folly integration with F14FastMap (#9546)
Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94 |
3 years ago |
|
Jay Zhuang
|
f934a0af46 |
Add event listener support on remote compactor side (#9821)
Summary: So the user is able to set event listener on the compactor side. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9821 Test Plan: unittest added Reviewed By: ajkr Differential Revision: D35485388 Pulled By: jay-zhuang fbshipit-source-id: 669d8a3aaee012b75b940470306756c03ffa09b2 |
3 years ago |
|
Akanksha Mahajan
|
ae82d91492 |
Remove corrupted WAL files in kPointRecoveryMode with avoid_flush_duing_recovery set true (#9634)
Summary: 1) In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't flush the data from WAL to L0 for all column families if possible. As a result, not all column families can increase their log_numbers, and min_log_number_to_keep won't change. 2) For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change. If we persist a new MANIFEST with advanced log_numbers for some column families, then during a second crash after persisting the MANIFEST, RocksDB will see some column families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail. As a solution, 1. the corrupted WALs whose numbers are larger than the corrupted wal and smaller than the new WAL will be moved to archive folder. 2. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful Pull Request resolved: https://github.com/facebook/rocksdb/pull/9634 Test Plan: 1. Added new unit tests 2. make crast_test -j Reviewed By: riversand963 Differential Revision: D34463666 Pulled By: akankshamahajan15 fbshipit-source-id: e233d3af0ed4e2028ca0cf051e5a334a0fdc9d19 |
3 years ago |
|
Yanqin Jin
|
0ad9ee30ce |
Remove dead code (#9825)
Summary: Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0. This PR removes dead code related to these two removed options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825 Test Plan: make check Reviewed By: akankshamahajan15 Differential Revision: D35517950 Pulled By: riversand963 fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482 |
3 years ago |
|
sdong
|
e03f8a0c12 |
L0 Subcompaction to trim input files (#9802)
Summary: When sub compaction is decided for L0->L1 compaction, most of the cases, all L0 files will be involved in all sub compactions. However, it is not always the case. When files are generally (but not strictly) inserted in sequential order, there can be a subset of L0 files invovled. Yet RocksDB always open all those L0 files, and build an iterator, read many of the files' first of last block with expensive readahead. We trim some input files to reduce overhead a little bit. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9802 Test Plan: Add a unit test to cover this case and manually validate the behavior while running the test. Reviewed By: ajkr Differential Revision: D35371031 fbshipit-source-id: 701ed7375b5cbe41672e93b38fe8a1503dad08b6 |
3 years ago |
|
Peter Dillinger
|
8ce7cea93f |
Tests for filter compatibility (#9773)
Summary: This change adds two unit tests that would each catch the regression fixed in https://github.com/facebook/rocksdb/issues/9736 * TableMetaIndexKeys - detects any churn in metaindex block keys generated by SST files using standard db_test_util configurations. * BloomFilterCompatibility - this detects if any common built-in FilterPolicy configurations fail to read filters generated by another. (The regression bug caused NewRibbonFilterPolicy not to read filters from NewBloomFilterPolicy and vice-versa.) This replaces some previous tests that didn't really appear to be testing much of anything except basic data correctness, which doesn't tell you a filter is being used. Light refactoring in meta_blocks.cc/h to support inspecting metaindex keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9773 Test Plan: this is the test. Verified that 7.0.2 fails both tests and 7.0.3 passes. With backporting for intentional API changes in 7.0, 6.29 also passes. Reviewed By: ajkr Differential Revision: D35236248 Pulled By: pdillinger fbshipit-source-id: 493dfe9ad7e27524bf7c6c1af8a4b8c31bc6ef5a |
3 years ago |
|
Hui Xiao
|
49623f9c8e |
Account memory of big memory users in BlockBasedTable in global memory limit (#9748)
Summary: **Context:** Through heap profiling, we discovered that `BlockBasedTableReader` objects can accumulate and lead to high memory usage (e.g, `max_open_file = -1`). These memories are currently not saved, not tracked, not constrained and not cache evict-able. As a first step to improve this, similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track an estimate of `BlockBasedTableReader` object's memory in block cache and fail future creation if the memory usage exceeds the available space of cache at the time of creation. **Summary:** - Approximate big memory users (`BlockBasedTable::Rep` and `TableProperties` )' memory usage in addition to the existing estimated ones (filter block/index block/un-compression dictionary) - Charge all of these memory usages to block cache on `BlockBasedTable::Open()` and release them on `~BlockBasedTable()` as there is no memory usage fluctuation of concern in between - Refactor on CacheReservationManager (and its call-sites) to add concurrent support for BlockBasedTable used in this PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9748 Test Plan: - New unit tests - db bench: `OpenDb` : **-0.52% in ms** - Setup `./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -disable_auto_compactions=1 -write_buffer_size=1048576` - Repeated run with pre-change w/o feature and post-change with feature, benchmark `OpenDb`: `./db_bench -benchmarks=readrandom -use_existing_db=1 -db=/dev/shm/testdb -reserve_table_reader_memory=true (remove this when running w/o feature) -file_opening_threads=3 -open_files=-1 -report_open_timing=true| egrep 'OpenDb:'` #-run | (feature-off) avg milliseconds | std milliseconds | (feature-on) avg milliseconds | std milliseconds | change (%) -- | -- | -- | -- | -- | -- 10 | 11.4018 | 5.95173 | 9.47788 | 1.57538 | -16.87382694 20 | 9.23746 | 0.841053 | 9.32377 | 1.14074 | 0.9343477536 40 | 9.0876 | 0.671129 | 9.35053 | 1.11713 | 2.893283155 80 | 9.72514 | 2.28459 | 9.52013 | 1.0894 | -2.108041632 160 | 9.74677 | 0.991234 | 9.84743 | 1.73396 | 1.032752389 320 | 10.7297 | 5.11555 | 10.547 | 1.97692 | **-1.70275031** 640 | 11.7092 | 2.36565 | 11.7869 | 2.69377 | **0.6635807741** - db bench on write with cost to cache in WriteBufferManager (just in case this PR's CRM refactoring accidentally slows down anything in WBM) : `fillseq` : **+0.54% in micros/op** `./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -disable_auto_compactions=1 -cost_write_buffer_to_cache=true -write_buffer_size=10000000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) avg micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 6.15 | 0.260187 | 6.289 | 0.371192 | 2.260162602 20 | 7.28025 | 0.465402 | 7.37255 | 0.451256 | 1.267813605 40 | 7.06312 | 0.490654 | 7.13803 | 0.478676 | **1.060579461** 80 | 7.14035 | 0.972831 | 7.14196 | 0.92971 | **0.02254791432** - filter bench: `bloom filter`: **-0.78% in ms/key** - ` ./filter_bench -impl=2 -quick -reserve_table_builder_memory=true | grep 'Build avg'` #-run | (pre-PR) avg ns/key | std ns/key | (post-PR) ns/key | std ns/key | change (%) -- | -- | -- | -- | -- | -- 10 | 26.4369 | 0.442182 | 26.3273 | 0.422919 | **-0.4145720565** 20 | 26.4451 | 0.592787 | 26.1419 | 0.62451 | **-1.1465262** - Crash test `python3 tools/db_crashtest.py blackbox --reserve_table_reader_memory=1 --cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D35136549 Pulled By: hx235 fbshipit-source-id: 146978858d0f900f43f4eb09bfd3e83195e3be28 |
3 years ago |
|
Andrew Kryczka
|
04623e7cd4 |
Fix GetMergeOperands() heap-use-after-free on flushed memtable (#9805)
Summary: Fixes https://github.com/facebook/rocksdb/issues/9066. Prior to the fix in this PR, this PR's unit test reported the following error under ASAN: ``` ==2175705==ERROR: AddressSanitizer: heap-use-after-free on address 0x61f0000012a5 at pc 0x7f0fc36e76ce bp 0x7ffc103e9ca0 sp 0x7ffc103e9450 READ of size 5 at 0x61f0000012a5 thread T0 #0 0x7f0fc36e76cd in __interceptor_memcpy /home/engshare/third-party2/gcc/9.x/src/gcc-10.x/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:790 https://github.com/facebook/rocksdb/issues/1 0x7f0fc35a207e in std::char_traits<char>::copy(char*, char const*, unsigned long) /home/engshare/third-party2/libgcc/9.x/src/gcc-9.x/x86_64-facebook-linux/libstdc++-v3/include/bits/char_traits.h:365 https://github.com/facebook/rocksdb/issues/2 0x7f0fc35a207e in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_S_copy(char*, char const*, unsigned long) /home/engshare/third-party2/libgcc/9.x/src/gcc-9.x/x86_64-facebook-linux/libstdc++-v3/include/bits/basic_string.h:351 https://github.com/facebook/rocksdb/issues/3 0x7f0fc35a207e in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_replace(unsigned long, unsigned long, char const*, unsigned long) /home/engshare/third-party2/libgcc/9.x/src/gcc-9.x/x86_64-facebook-linux/libstdc++-v3/include/bits/basic_string.tcc:440 https://github.com/facebook/rocksdb/issues/4 0x8679ca in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::assign(char const*, unsigned long) /mnt/gvfs/third-party2/libgcc/4959b39cfbe5965a37c861c4c327fa7c5c759b87/9.x/platform009/9202ce7/include/c++/9.3.0/bits/basic_string.h:1422 https://github.com/facebook/rocksdb/issues/5 0x8679ca in rocksdb::PinnableSlice::PinSelf(rocksdb::Slice const&) include/rocksdb/slice.h:171 https://github.com/facebook/rocksdb/issues/6 0x8679ca in rocksdb::DBImpl::GetImpl(rocksdb::ReadOptions const&, rocksdb::Slice const&, rocksdb::DBImpl::GetImplOptions&) db/db_impl/db_impl.cc:1930 https://github.com/facebook/rocksdb/issues/7 0x547324 in rocksdb::DBImpl::GetMergeOperands(rocksdb::ReadOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::PinnableSlice*, rocksdb::GetMergeOperandsOptions*, int*) db/db_impl/db_impl.h:203 https://github.com/facebook/rocksdb/issues/8 0x547324 in rocksdb::DBMergeOperandTest_FlushedMergeOperandReadAfterFreeBug_Test::TestBody() db/db_merge_operand_test.cc:117 https://github.com/facebook/rocksdb/issues/9 0x7241da in void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899 https://github.com/facebook/rocksdb/issues/10 0x7241da in void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935 https://github.com/facebook/rocksdb/issues/11 0x701a47 in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3973 https://github.com/facebook/rocksdb/issues/12 0x702040 in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3965 https://github.com/facebook/rocksdb/issues/13 0x702040 in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4149 https://github.com/facebook/rocksdb/issues/14 0x7025f7 in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4124 https://github.com/facebook/rocksdb/issues/15 0x7025f7 in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4267 https://github.com/facebook/rocksdb/issues/16 0x704217 in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4253 https://github.com/facebook/rocksdb/issues/17 0x704217 in testing::internal::UnitTestImpl::RunAllTests() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6633 https://github.com/facebook/rocksdb/issues/18 0x72505a in bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899 https://github.com/facebook/rocksdb/issues/19 0x72505a in bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935 https://github.com/facebook/rocksdb/issues/20 0x704aa1 in testing::UnitTest::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6242 https://github.com/facebook/rocksdb/issues/21 0x4c4aff in RUN_ALL_TESTS() third-party/gtest-1.8.1/fused-src/gtest/gtest.h:22110 https://github.com/facebook/rocksdb/issues/22 0x4c4aff in main db/db_merge_operand_test.cc:404 https://github.com/facebook/rocksdb/issues/23 0x7f0fc3108dc4 in __libc_start_main ../csu/libc-start.c:308 https://github.com/facebook/rocksdb/issues/24 0x5445fd in _start (/data/users/andrewkr/rocksdb/db_merge_operand_test+0x5445fd) 0x61f0000012a5 is located 1061 bytes inside of 3264-byte region [0x61f000000e80,0x61f000001b40) freed by thread T0 here: #0 0x7f0fc375b6af in operator delete(void*, unsigned long) /home/engshare/third-party2/gcc/9.x/src/gcc-10.x/libsanitizer/asan/asan_new_delete.cc:177 https://github.com/facebook/rocksdb/issues/1 0x743be8 in rocksdb::SuperVersion::~SuperVersion() db/column_family.cc:432 https://github.com/facebook/rocksdb/issues/2 0x8052aa in rocksdb::DBImpl::CleanupSuperVersion(rocksdb::SuperVersion*) db/db_impl/db_impl.cc:3534 https://github.com/facebook/rocksdb/issues/3 0x8676c2 in rocksdb::DBImpl::ReturnAndCleanupSuperVersion(rocksdb::ColumnFamilyData*, rocksdb::SuperVersion*) db/db_impl/db_impl.cc:3544 https://github.com/facebook/rocksdb/issues/4 0x8676c2 in rocksdb::DBImpl::GetImpl(rocksdb::ReadOptions const&, rocksdb::Slice const&, rocksdb::DBImpl::GetImplOptions&) db/db_impl/db_impl.cc:1911 https://github.com/facebook/rocksdb/issues/5 0x547324 in rocksdb::DBImpl::GetMergeOperands(rocksdb::ReadOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::PinnableSlice*, rocksdb::GetMergeOperandsOptions*, int*) db/db_impl/db_impl.h:203 https://github.com/facebook/rocksdb/issues/6 0x547324 in rocksdb::DBMergeOperandTest_FlushedMergeOperandReadAfterFreeBug_Test::TestBody() db/db_merge_operand_test.cc:117 https://github.com/facebook/rocksdb/issues/7 0x7241da in void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899 https://github.com/facebook/rocksdb/issues/8 0x7241da in void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935 https://github.com/facebook/rocksdb/issues/9 0x701a47 in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3973 https://github.com/facebook/rocksdb/issues/10 0x702040 in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3965 https://github.com/facebook/rocksdb/issues/11 0x702040 in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4149 https://github.com/facebook/rocksdb/issues/12 0x7025f7 in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4124 https://github.com/facebook/rocksdb/issues/13 0x7025f7 in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4267 https://github.com/facebook/rocksdb/issues/14 0x704217 in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4253 https://github.com/facebook/rocksdb/issues/15 0x704217 in testing::internal::UnitTestImpl::RunAllTests() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6633 https://github.com/facebook/rocksdb/issues/16 0x72505a in bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899 https://github.com/facebook/rocksdb/issues/17 0x72505a in bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935 https://github.com/facebook/rocksdb/issues/18 0x704aa1 in testing::UnitTest::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6242 https://github.com/facebook/rocksdb/issues/19 0x4c4aff in RUN_ALL_TESTS() third-party/gtest-1.8.1/fused-src/gtest/gtest.h:22110 https://github.com/facebook/rocksdb/issues/20 0x4c4aff in main db/db_merge_operand_test.cc:404 https://github.com/facebook/rocksdb/issues/21 0x7f0fc3108dc4 in __libc_start_main ../csu/libc-start.c:308 https://github.com/facebook/rocksdb/issues/22 0x5445fd in _start (/data/users/andrewkr/rocksdb/db_merge_operand_test+0x5445fd) ... ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9805 Test Plan: following the fix in this PR, the new unit test passes Reviewed By: jay-zhuang Differential Revision: D35388415 Pulled By: ajkr fbshipit-source-id: b39c5d002155906c8abc4a3429eca696dbf916d0 |
3 years ago |
|
Yanqin Jin
|
1a1c5bda23 |
Disallow commit-time-batch for write-prepared/write-unprepared txn conditionally (#9794)
Summary: For write-prepared/write-unprepared transactions, GetCommitTimeWriteBatch() can be used only if the transaction is started with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set to true. Otherwise, it is possible that multiple uncommitted versions of the same key exist in the database. During bottommost compaction, RocksDB may set the sequence numbers of both to zero once they become committed, causing output SST file to have two identical internal keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794 Test Plan: make check pay special attention to the following ``` transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/* ``` Reviewed By: lth Differential Revision: D35327214 Pulled By: riversand963 fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f |
3 years ago |
|
Peter Dillinger
|
6534c6dea4 |
Fix remaining uses of "backupable" (#9792)
Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329 |
3 years ago |
|
Bo Wang
|
bcabee737f |
Improve comments for some files (#9793)
Summary: Update the comments, e.g. fixing typo, formatting, etc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9793 Reviewed By: jay-zhuang Differential Revision: D35323989 Pulled By: gitbw95 fbshipit-source-id: 4a72fc02b67abaae8be0d1439b68f9967a68052d |
3 years ago |
|
Andrew Kryczka
|
f246e56d0a |
Fix a few documentation errors including in public APIs (#9789)
Summary: The internal WriteBatch doc wrongly indicated which optypes are followed by varstring. Updated some optypes according to the following code: |
3 years ago |
|
Yanqin Jin
|
6eafdf135a |
Encode min_log_number_to_keep and delete_wals_before in one version edit (#9766)
Summary: min_log_number_to_keep denotes that the WALs whose numbers are below this value **will** be deleted by RocksDB. delete_wals_before will be used by RocksDB if track_and_verify_wals_in_manifest is set to true. During recovery, RocksDB uses the info encoded in delete_wals_before to reconstruct its knowledge about what WALs to expect existing. If these two tags are not encoded in the same VersionEdit, then it's possible for min_log_number_to_keep=100 to exist, but delete_wals_before=100 to be lost due to power failure. Subsequent recovery will delete 99.log. If the db crashes again, the following recovery will expect to see 99.log since there is no delete_wals_before=100 in the MANIFEST, but the WAL is already deleted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9766 Test Plan: First of all, make check. Second, format compatibility. SHORT_TEST=1 ./tools/check_format_compatible.sh Reviewed By: ltamasi Differential Revision: D35203623 Pulled By: riversand963 fbshipit-source-id: 45623fc4b4b50d299d5e0f9559a3a4c5e9522c8f |
3 years ago |
|
sdong
|
bbcf7b192c |
Fix DB::Open() error logging (#9784)
Summary: Right now we log a wrong error when DB::Open() fails. Fix it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9784 Test Plan: CI runs should pass Reviewed By: ajkr, riversand963 Differential Revision: D35290203 fbshipit-source-id: ffc640afa27f6b0a2382ee153dc43f28d9e242be |
3 years ago |
|
Yanqin Jin
|
de9df6e818 |
Do not release and re-acquire dbmutex on memtable-switch if no listener (#9758)
Summary: There is no need to release-and-acquire immediately when no listener is registered. This is what we have been doing for `NotifyOnFlushBegin()`, `NotifyOnFlushCompleted()`, `NotifyOnCompactionBegin()`, `NotifyOnCompactionCompleted()`, and some other `NotifyOnXX` methods in event_helpers.cc. Do the same for `NotifyOnMemTableSealed ()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9758 Test Plan: make check Reviewed By: jay-zhuang Differential Revision: D35159552 Pulled By: riversand963 fbshipit-source-id: 6e0aac50bd5c8f506d809b6638c33a7a28d1e87f |
3 years ago |
|
bbkot
|
e55018a8ce |
fixing issue #8345 RocksDB does not work when using UNC network paths (#9384)
Summary: Fix https://github.com/facebook/rocksdb/issues/8345 RocksDB does not work with network filesystem paths on Windows, e.g. "\\hostname\folder\..." Pull Request resolved: https://github.com/facebook/rocksdb/pull/9384 Reviewed By: mrambacher Differential Revision: D33830622 Pulled By: riversand963 fbshipit-source-id: 2a99dc3c94415eb1460e110784b97d71600218f1 |
3 years ago |
|
Peter Dillinger
|
105d7f0c7c |
Document SetOptions API (#9778)
Summary: much needed Some other minor tweaks also Pull Request resolved: https://github.com/facebook/rocksdb/pull/9778 Test Plan: existing tests Reviewed By: ajkr Differential Revision: D35258195 Pulled By: pdillinger fbshipit-source-id: 974ddafc23a540aacceb91da72e81593d818f99c |
3 years ago |
|
Peter Dillinger
|
40e3f30a28 |
Fix FileStorageInfo fields from GetLiveFilesMetaData (#9769)
Summary: In making `SstFileMetaData` inherit from `FileStorageInfo`, I overlooked setting some `FileStorageInfo` fields when then default `SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`. Also removed some buggy `static_cast<size_t>` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769 Test Plan: Updated tests Reviewed By: jay-zhuang Differential Revision: D35220383 Pulled By: pdillinger fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8 |
3 years ago |
|
Peter Dillinger
|
cad809978a |
Fix heap use-after-free race with DropColumnFamily (#9730)
Summary: Although ColumnFamilySet comments say that DB mutex can be freed during iteration, as long as you hold a ref while releasing DB mutex, this is not quite true because UnrefAndTryDelete might delete cfd right before it is needed to get ->next_ for the next iteration of the loop. This change solves the problem by making a wrapper class that makes such iteration easier while handling the tricky details of UnrefAndTryDelete on the previous cfd only after getting next_ in operator++. FreeDeadColumnFamilies should already have been obsolete; this removes it for good. Similarly, ColumnFamilySet::iterator doesn't need to check for cfd with 0 refs, because those are immediately deleted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730 Test Plan: was reported with ASAN on unit tests like DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching Reviewed By: ltamasi Differential Revision: D35038143 Pulled By: pdillinger fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9 |
3 years ago |
|
Yanqin Jin
|
e0c84aa0dc |
Fix a race condition in WAL tracking causing DB open failure (#9715)
Summary: There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC. The race condition is between two background flush threads trying to install flush results to the MANIFEST. Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially, both column families have one mutable (active) memtable whose data backed by 6.log. 1. Trigger a manual flush for "cf1", creating a 7.log 2. Insert another key to "default", and trigger flush for "default", creating 8.log 3. BgFlushThread1 finishes writing 9.sst 4. BgFlushThread2 finishes writing 10.sst ``` Time BgFlushThread1 BgFlushThread2 | mutex_.Lock() | precompute min_wal_to_keep as 6 | mutex_.Unlock() | mutex_.Lock() | precompute min_wal_to_keep as 6 | join MANIFEST write queue and mutex_.Unlock() | write to MANIFEST | mutex_.Lock() | cfd1->log_number = 7 | Signal bg_flush_2 and mutex_.Unlock() | wake up and mutex_.Lock() | cfd0->log_number = 8 | FindObsoleteFiles() with job_context->log_number == 7 | mutex_.Unlock() | PurgeObsoleteFiles() deletes 6.log V ``` As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6). Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6). No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`, due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514. The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e. the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist. If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true. We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know the correct min wal number until the other bg flush threads have finished committing to the manifest and updated the `cfd::log_number`. To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`, and use it to track WAL file deletion in non-2pc mode as well. This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread. `min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715 Test Plan: ``` make check ``` Also ran stress test below (with asan) to make sure it completes successfully. ``` TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \ CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \ make J=52 -j52 blackbox_asan_crash_test ``` Reviewed By: ltamasi Differential Revision: D34984412 Pulled By: riversand963 fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005 |
3 years ago |
|
Yanqin Jin
|
29bec740f5 |
Return invalid argument if batch is null (#9744)
Summary: Originally, a corruption will be returned by `DBImpl::WriteImpl(batch...)` if batch is null. This is inaccurate since there is no data corruption. Return `Status::InvalidArgument()` instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9744 Test Plan: make check Reviewed By: ltamasi Differential Revision: D35086268 Pulled By: riversand963 fbshipit-source-id: 677397b007a53bc25210eac0178d49c9797b5951 |
3 years ago |
|
Peter Dillinger
|
91687d70ea |
Fix a major performance bug in 7.0 re: filter compatibility (#9736)
Summary: Bloom filters generated by pre-7.0 releases are not read by 7.0.x releases (and vice-versa) due to changes to FilterPolicy::Name() in https://github.com/facebook/rocksdb/issues/9590. This can severely impact read performance and read I/O on upgrade or downgrade with existing DB, but not data correctness. To fix, we go back using the old, unified name in SST metadata but (for a while anyway) recognize the aliases that could be generated by early 7.0.x releases. This unfortunately requires a public API change to avoid interfering with all the good changes from https://github.com/facebook/rocksdb/issues/9590, but the API change only affects users with custom FilterPolicy, which should be very few. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9736 Test Plan: manual Generate DBs with ``` ./db_bench.7.0 -db=/dev/shm/rocksdb.7.0 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 ``` and similar. Compare with ``` for IMPL in 6.29 7.0 fixed; do for DB in 6.29 7.0 fixed; do echo "Testing $IMPL on $DB:"; ./db_bench.$IMPL -db=/dev/shm/rocksdb.$DB -use_existing_db -readonly -bloom_bits=10 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=10 2>&1 | grep micros/op; done; done ``` Results: ``` Testing 6.29 on 6.29: readrandom : 34.381 micros/op 29085 ops/sec; 3.2 MB/s (291999 of 291999 found) Testing 6.29 on 7.0: readrandom : 190.443 micros/op 5249 ops/sec; 0.6 MB/s (52999 of 52999 found) Testing 6.29 on fixed: readrandom : 40.148 micros/op 24907 ops/sec; 2.8 MB/s (249999 of 249999 found) Testing 7.0 on 6.29: readrandom : 229.430 micros/op 4357 ops/sec; 0.5 MB/s (43999 of 43999 found) Testing 7.0 on 7.0: readrandom : 33.348 micros/op 29986 ops/sec; 3.3 MB/s (299999 of 299999 found) Testing 7.0 on fixed: readrandom : 152.734 micros/op 6546 ops/sec; 0.7 MB/s (65999 of 65999 found) Testing fixed on 6.29: readrandom : 32.024 micros/op 31224 ops/sec; 3.5 MB/s (312999 of 312999 found) Testing fixed on 7.0: readrandom : 33.990 micros/op 29390 ops/sec; 3.3 MB/s (294999 of 294999 found) Testing fixed on fixed: readrandom : 28.714 micros/op 34825 ops/sec; 3.9 MB/s (348999 of 348999 found) ``` Just paying attention to order of magnitude of ops/sec (short test durations, lots of noise), it's clear that with the fix we can read <= 6.29 & >= 7.0 at full speed, where neither 6.29 nor 7.0 can on both. And 6.29 release can properly read fixed DB at full speed. Reviewed By: siying, ajkr Differential Revision: D35057844 Pulled By: pdillinger fbshipit-source-id: a46893a6af4bf084375ebe4728066d00eb08f050 |
3 years ago |
|
Yanqin Jin
|
3bd150c442 |
Print information about all column families when using ldb (#9719)
Summary: Before this PR, the following command prints only the default column family's information in the end: ``` ldb --db=. --hex manifest_dump --verbose ``` We should print all column families instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9719 Test Plan: `make check` makes sure nothing breaks. Generate a DB, use the above command to verify all column families are printed. Reviewed By: akankshamahajan15 Differential Revision: D34992453 Pulled By: riversand963 fbshipit-source-id: de1d38c4539cd89f74e1a6240ad7a6e2416bf198 |
3 years ago |
|
gitbw95
|
8102690a52 |
Update Cache::Release param from force_erase to erase_if_last_ref (#9728)
Summary: The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728 Reviewed By: pdillinger Differential Revision: D35038673 Pulled By: gitbw95 fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f |
3 years ago |
|
KNOEEE
|
cb4d188a34 |
Fix a bug in PosixClock (#9695)
Summary: Multiplier here should be 1e6 to get microseconds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9695 Reviewed By: ajkr Differential Revision: D34897086 Pulled By: jay-zhuang fbshipit-source-id: 9c1d0811ea740ba0a007edc2da199edbd000b88b |
3 years ago |
|
duyuqi
|
cbe303c19b |
fix a bug, c api, if enable inplace_update_support, and use create sn… (#9471)
Summary: c api release snapshot will core dump when enable inplace_update_support and create snapshot Pull Request resolved: https://github.com/facebook/rocksdb/pull/9471 Reviewed By: akankshamahajan15 Differential Revision: D34965103 Pulled By: riversand963 fbshipit-source-id: c3aeeb9ea7126c2eda1466102794fecf57b6ab77 |
3 years ago |
|
Peter Dillinger
|
a8a422e962 |
Add manifest fix-up utility for file temperatures (#9683)
Summary: The goal of this change is to allow changes to the "current" (in FileSystem) file temperatures to feed back into DB metadata, so that they can inform decisions and stats reporting. In part because of modular code factoring, it doesn't seem easy to do this automagically, where opening an SST file and observing current Temperature different from expected would trigger a change in metadata and DB manifest write (essentially giving the deep read path access to the write path). It is also difficult to do this while the DB is open because of the limitations of LogAndApply. This change allows updating file temperature metadata on a closed DB using an experimental utility function UpdateManifestForFilesState() or `ldb update_manifest --update_temperatures`. This should suffice for "migration" scenarios where outside tooling has placed or re-arranged DB files into a (different) tiered configuration without going through RocksDB itself (currently, only compaction can change temperature metadata). Some details: * Refactored and added unit test for `ldb unsafe_remove_sst_file` because of shared functionality * Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext move constructor (related to an older draft of this change) Possible follow-up work: * Support updating manifest with file checksums, such as when a new checksum function is used and want existing DB metadata updated for it. * It's possible that for some repair scenarios, lighter weight than full repair, we might want to support UpdateManifestForFilesState() to modify critical file details like size or checksum using same algorithm. But let's make sure these are differentiated from modifying file details in ways that don't suspect corruption (or require extreme trust). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683 Test Plan: unit tests added Reviewed By: jay-zhuang Differential Revision: D34798828 Pulled By: pdillinger fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554 |
3 years ago |
|
Yanqin Jin
|
b2aacaf923 |
Fix assertion error by doing comparison with mutex (#9717)
Summary: On CircleCI MacOS instances, we have been seeing the following assertion error: ``` Assertion failed: (alive_log_files_tail_ == alive_log_files_.rbegin()), function WriteToWAL, file /Users/distiller/project/db/db_impl/db_impl_write.cc, line 1213. Received signal 6 (Abort trap: 6) #0 0x1 https://github.com/facebook/rocksdb/issues/1 abort (in libsystem_c.dylib) + 120 https://github.com/facebook/rocksdb/issues/2 err (in libsystem_c.dylib) + 0 https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteBatch const&, rocksdb::log::Writer*, unsigned long long*, unsigned long long*, rocksdb::Env::IOPriority, bool, bool) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1213) https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteThread::WriteGroup const&, rocksdb::log::Writer*, unsigned long long*, bool, bool, unsigned long long) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1251) https://github.com/facebook/rocksdb/issues/5 rocksdb::DBImpl::WriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long long*, unsigned long long, bool, unsigned long long*, unsigned long, rocksdb::PreReleaseCallback*) (in librocksdb.7.0.0.dylib) (db_impl_ rite.cc:421) https://github.com/facebook/rocksdb/issues/6 rocksdb::DBImpl::Write(rocksdb::WriteOptions const&, rocksdb::WriteBatch*) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:109) https://github.com/facebook/rocksdb/issues/7 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:2159) https://github.com/facebook/rocksdb/issues/8 rocksdb::DBImpl::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:37) https://github.com/facebook/rocksdb/issues/9 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db.h:382) https://github.com/facebook/rocksdb/issues/10 rocksdb::DBBasicTestWithTimestampPrefixSeek_IterateWithPrefix_Test::TestBody() (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:2926) https://github.com/facebook/rocksdb/issues/11 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899) https://github.com/facebook/rocksdb/issues/12 void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935) https://github.com/facebook/rocksdb/issues/13 testing::Test::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:3980) https://github.com/facebook/rocksdb/issues/14 testing::TestInfo::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4153) https://github.com/facebook/rocksdb/issues/15 testing::TestCase::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4266) https://github.com/facebook/rocksdb/issues/16 testing::internal::UnitTestImpl::RunAllTests() (in db_with_timestamp_basic_test) (gtest-all.cc:6632) https://github.com/facebook/rocksdb/issues/17 bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899) https://github.com/facebook/rocksdb/issues/18 bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935) https://github.com/facebook/rocksdb/issues/19 testing::UnitTest::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:6242) https://github.com/facebook/rocksdb/issues/20 RUN_ALL_TESTS() (in db_with_timestamp_basic_test) (gtest.h:22110) https://github.com/facebook/rocksdb/issues/21 main (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:3150) https://github.com/facebook/rocksdb/issues/22 start (in libdyld.dylib) + 1 ``` It's likely caused by concurrent, unprotected access to the deque, even though `back()` is never popped, and we are comparing `rbegin()` with a cached `riterator`. To be safe, do the comparison only if we have mutex. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9717 Test Plan: One example Ssh to one CircleCI MacOS instance. ``` gtest-parallel -r 1000 -w 8 ./db_test --gtest_filter=DBTest.FlushesInParallelWithCompactRange ``` Reviewed By: pdillinger Differential Revision: D34990696 Pulled By: riversand963 fbshipit-source-id: 62dd48ae6fedbda53d0a64d73de9b948b4c26eee |
3 years ago |
|
Peter Dillinger
|
cff0d1e8e6 |
New backup meta schema, with file temperatures (#9660)
Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a |
3 years ago |
|
Yanqin Jin
|
5894761056 |
Improve stress test for transactions (#9568)
Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7 |
3 years ago |
|
anand76
|
a88d8795ec |
Expand auto recovery to background read errors (#9679)
Summary: Fix and enhance the background error recovery logic to handle the following situations - 1. Background read errors during flush/compaction (previously was resulting in unrecoverable state) 2. Fix auto recovery failure on read/write errors during atomic flush. It was failing due to a bug in setting the resuming_from_bg_err variable in AtomicFlushMemTablesToOutputFiles. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679 Test Plan: Add new unit tests in error_handler_fs_test Reviewed By: riversand963 Differential Revision: D34770097 Pulled By: anand1976 fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742 |
3 years ago |
|
Jay Zhuang
|
2c8100e60e |
Fix a race condition when disable and enable manual compaction (#9694)
Summary: In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground manual compaction thread does not have to wait background compaction thread to finish. Which could be a problem that the user re-enable manual compaction with `EnableManualCompaction()`, it may re-enable the BG compaction which supposed be cancelled. This patch makes the FG compaction wait on `manual_compaction_state.done`, which either be set by BG compaction or Unschedule callback. Then when FG manual compaction thread returns, it should not have BG compaction running. So shared_ptr is no longer needed for `manual_compaction_state`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694 Test Plan: a StressTest and unittest Reviewed By: ajkr Differential Revision: D34885472 Pulled By: jay-zhuang fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274 |
3 years ago |
|
Yanqin Jin
|
6a76008369 |
Fix TSAN caused by calling `rend()` and `pop_front()`. (#9698)
Summary: PR9686 makes `WriteToWAL()` call `assert(...!=rend())` while not holding db mutex or log mutex. Another thread may concurrently call `pop_front()`, causing race condition. To fix, assert only if mutex is held. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9698 Test Plan: COMPILE_WITH_TSAN=1 make check Reviewed By: jay-zhuang Differential Revision: D34898535 Pulled By: riversand963 fbshipit-source-id: 1ddfa5bf1b6ae8d409cab6ff6e1b5321c6803da9 |
3 years ago |
|
gukaifeng
|
89429a9081 |
fix a bug of the ticker NO_FILE_OPENS (#9677)
Summary: In the original code, the value of `NO_FILE_OPENS` corresponding to the Ticker item will be increased regardless of whether the file is successfully opened or not. Even counts are repeated, which can lead to skewed counts. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9677 Reviewed By: jay-zhuang Differential Revision: D34725733 Pulled By: ajkr fbshipit-source-id: 841234ed03802c0105fd2107d82a740265ead576 |
3 years ago |
|
Jermy Li
|
3da8236837 |
fix: Reusing-Iterator reads stale keys after DeleteRange() performed (#9258)
Summary: fix https://github.com/facebook/rocksdb/issues/9255 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9258 Reviewed By: pdillinger Differential Revision: D34879684 Pulled By: ajkr fbshipit-source-id: 5934f4b7524dc27ecdf1430e0456a0fc02958fc7 |
3 years ago |
|
Yanqin Jin
|
bbdaf63d0f |
Fix a TSAN-reported bug caused by concurrent accesss to std::deque (#9686)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9686 According to https://www.cplusplus.com/reference/deque/deque/back/, " The container is accessed (neither the const nor the non-const versions modify the container). The last element is potentially accessed or modified by the caller. Concurrently accessing or modifying other elements is safe. " Also according to https://www.cplusplus.com/reference/deque/deque/pop_front/, " The container is modified. The first element is modified. Concurrently accessing or modifying other elements is safe (although see iterator validity above). " In RocksDB, we never pop the last element of `DBImpl::alive_log_files_`. We have been exploiting this fact and the above two properties when ensuring correctness when `DBImpl::alive_log_files_` may be accessed concurrently. Specifically, it can be accessed in the write path when db mutex is released. Sometimes, the log_mute_ is held. It can also be accessed in `FindObsoleteFiles()` when db mutex is always held. It can also be accessed during recovery when db mutex is also held. Given the fact that we never pop the last element of alive_log_files_, we currently do not acquire additional locks when accessing it in `WriteToWAL()` as follows ``` alive_log_files_.back().AddSize(log_entry.size()); ``` This is problematic. Check source code of deque.h ``` back() _GLIBCXX_NOEXCEPT { __glibcxx_requires_nonempty(); ... } pop_front() _GLIBCXX_NOEXCEPT { ... if (this->_M_impl._M_start._M_cur != this->_M_impl._M_start._M_last - 1) { ... ++this->_M_impl._M_start._M_cur; } ... } ``` `back()` will actually call `__glibcxx_requires_nonempty()` first. If `__glibcxx_requires_nonempty()` is enabled and not an empty macro, it will call `empty()` ``` bool empty() { return this->_M_impl._M_finish == this->_M_impl._M_start; } ``` You can see that it will access `this->_M_impl._M_start`, racing with `pop_front()`. Therefore, TSAN will actually catch the bug in this case. To be able to use TSAN on our library and unit tests, we should always coordinate concurrent accesses to STL containers properly. We need to pass information about db mutex and log mutex into `WriteToWAL()`, otherwise it's impossible to know which mutex to acquire inside the function. To fix this, we can catch the tail of `alive_log_files_` by reference, so that we do not have to call `back()` in `WriteToWAL()`. Reviewed By: pdillinger Differential Revision: D34780309 fbshipit-source-id: 1def9821f0c437f2736c6a26445d75890377889b |
3 years ago |
|
Jay Zhuang
|
4dff279b19 |
DisableManualCompaction may fail to cancel an unscheduled task (#9659)
Summary: https://github.com/facebook/rocksdb/issues/9625 didn't change the unschedule condition which was waiting for the background thread to clean-up the compaction. make sure we only unschedule the task when it's scheduled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9659 Reviewed By: ajkr Differential Revision: D34651820 Pulled By: jay-zhuang fbshipit-source-id: 23f42081b15ec8886cd81cbf131b116e0c74dc2f |
3 years ago |
|
Jay Zhuang
|
09b0e8f2c7 |
Fix a timer crash caused by invalid memory management (#9656)
Summary: Timer crash when multiple DB instances doing heavy DB open and close operations concurrently. Which is caused by adding a timer task with smaller timestamp than the current running task. Fix it by moving the getting new task timestamp part within timer mutex protection. And other fixes: - Disallow adding duplicated function name to timer - Fix a minor memory leak in timer when a running task is cancelled Pull Request resolved: https://github.com/facebook/rocksdb/pull/9656 Reviewed By: ajkr Differential Revision: D34626296 Pulled By: jay-zhuang fbshipit-source-id: 6b6d96a5149746bf503546244912a9e41a0c5f6b |
3 years ago |
|
slk
|
95305c44a1 |
Add OpenAndTrimHistory API to support trimming data with specified timestamp (#9410)
Summary: As disscussed in (https://github.com/facebook/rocksdb/issues/9223), Here added a new API named DB::OpenAndTrimHistory, this API will open DB and trim data to the timestamp specofied by **trim_ts** (The data with newer timestamp than specified trim bound will be removed). This API should only be used at a timestamp-enabled db instance recovery. And this PR implemented a new iterator named HistoryTrimmingIterator to support trimming history with a new API named DB::OpenAndTrimHistory. HistoryTrimmingIterator wrapped around the underlying InternalITerator such that keys whose timestamps newer than **trim_ts** should not be returned to the compaction iterator while **trim_ts** is not null. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9410 Reviewed By: ltamasi Differential Revision: D34410207 Pulled By: riversand963 fbshipit-source-id: e54049dc234eccd673244c566b15df58df5a6236 |
3 years ago |
|
Baptiste Lemaire
|
7bed6595f3 |
Fix mempurge crash reported in #8958 (#9671)
Summary: Change the `MemPurge` code to address a failure during a crash test reported in https://github.com/facebook/rocksdb/issues/8958. ### Details and results of the crash investigation: These failures happened in a specific scenario where the list of immutable tables was composed of 2 or more memtables, and the last memtable was the output of a previous `Mempurge` operation. Because the `PickMemtablesToFlush` function included a sorting of the memtables (previous PR related to the Mempurge project), and because the `VersionEdit` of the flush class is piggybacked onto a single one of these memtables, the `VersionEdit` was not properly selected and applied to the `VersionSet` of the DB. Since the `VersionSet` was not edited properly, the database was losing track of the SST file created during the flush process, which was subsequently deleted (and as you can expect, caused the tests to crash). The following command consistently failed, which was quite convenient to investigate the issue: `$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done` ### Solution proposed The memtables are no longer sorted based on their `memtableID` in the `PickMemtablesToFlush` function. Additionally, the `next_log_number` of the memtable created as an output of the `Mempurge` function now takes in the correct value (the log number of the first memtable being mempurged). Finally, the VersionEdit object of the flush class now takes the maximum `next_log_number` of the stack of memtables being flushed, which doesnt change anything when Mempurge is `off` but becomes necessary when Mempurge is `on`. ### Testing of the solution The following command no longer fails: ``$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done`` Additionally, I ran `db_crashtest` (`whitebox` and `blackbox`) for 2.5 hours with MemPurge on and did not observe any crash. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9671 Reviewed By: pdillinger Differential Revision: D34697424 Pulled By: bjlemaire fbshipit-source-id: d1ab675b361904351ac81a35c184030e52222874 |
3 years ago |
|
Siddhartha Roychowdhury
|
fec4403ff1 |
Integrate WAL compression into log reader/writer. (#9642)
Summary: Integrate the streaming compress/uncompress API into WAL compression. The streaming compression object is stored in the log_writer along with a reusable output buffer to store the compressed buffer(s). The streaming uncompress object is stored in the log_reader along with a reusable output buffer to store the uncompressed buffer(s). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9642 Test Plan: Added unit tests to verify different scenarios - large buffers, split compressed buffers, etc. Future optimizations: The overhead for small records is quite high, so it makes sense to compress only buffers above a certain threshold and use a separate record type to indicate that those records are compressed. Reviewed By: anand1976 Differential Revision: D34709167 Pulled By: sidroyc fbshipit-source-id: a37a3cd1301adff6152fb3fcd23726106af07dd4 |
3 years ago |
|
Yanqin Jin
|
3b6dc049f7 |
Support user-defined timestamps in write-committed txns (#9629)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43 |
3 years ago |
|
Hui Xiao
|
ca0ef54f16 |
Rate-limit automatic WAL flush after each user write (#9607)
Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch]( |
3 years ago |
|
Ezgi Çiçek
|
27d6ef8e60 |
Rename mutable_cf_options to signify explicity copy (#9666)
Summary: Signify explicit copy with comment and better name for variable `mutable_cf_options` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9666 Reviewed By: riversand963 Differential Revision: D34680934 Pulled By: ezgicicek fbshipit-source-id: b64ef18725fe523835d14ceb4b29bcdfe493f8ed |
3 years ago |
|
Jay Zhuang
|
36aec94d85 |
`compression_per_level` should be used for flush and changeable (#9658)
Summary: - Make `compression_per_level` dynamical changeable with `SetOptions`; - Fix a bug that `compression_per_level` is not used for flush; Pull Request resolved: https://github.com/facebook/rocksdb/pull/9658 Test Plan: CI Reviewed By: ajkr Differential Revision: D34700749 Pulled By: jay-zhuang fbshipit-source-id: a23b9dfa7ad03d393c1d71781d19e91de796f49c |
3 years ago |
|
Peter Dillinger
|
ce60d0cbe5 |
Test refactoring for Backups+Temperatures (#9655)
Summary: In preparation for more support for file Temperatures in BackupEngine, this change does some test refactoring: * Move DBTest2::BackupFileTemperature test to BackupEngineTest::FileTemperatures, with some updates to make it work in the new home. This test will soon be expanded for deeper backup work. * Move FileTemperatureTestFS from db_test2.cc to db_test_util.h, to support sharing because of above moved test, but split off the "no link" part to the test needing it. * Use custom FileSystems in backupable_db_test rather than custom Envs, because going through Env file interfaces doesn't support temperatures. * Fix RemapFileSystem to map DirFsyncOptions::renamed_new_name parameter to FsyncWithDirOptions, which was required because this limitation caused a crash only after moving to higher fidelity of FileSystem interface (vs. LegacyDirectoryWrapper throwing away some parameter details) * `backupable_options_` -> `engine_options_` as part of the ongoing work to get rid of the obsolete "backupable" naming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9655 Test Plan: test code updates only Reviewed By: jay-zhuang Differential Revision: D34622183 Pulled By: pdillinger fbshipit-source-id: f24b7a596a89b9e089e960f4e5d772575513e93f |
3 years ago |
|
Hui Xiao
|
fc61e98ae6 |
Attempt to deflake DBLogicalBlockSizeCacheTest.CreateColumnFamilies (#9516)
Summary:
**Context:**
`DBLogicalBlockSizeCacheTest.CreateColumnFamilies` is flaky on a rare occurrence of assertion failure below
```
db/db_logical_block_size_cache_test.cc:210
Expected equality of these values:
1
cache_->GetRefCount(cf_path_0_)
Which is: 2
```
Root-cause: `ASSERT_OK(db->DestroyColumnFamilyHandle(cfs[0]));` in the test may not successfully decrease the ref count of `cf_path_0_` since the decreasing only happens in the clean-up of `ColumnFamilyData` when `ColumnFamilyData` has no referencing to it, which may not be true when `db->DestroyColumnFamilyHandle(cfs[0])` is called since background work such as `DumpStats()` can hold reference to that `ColumnFamilyData` (suggested and repro-d by ajkr ). Similar case `ASSERT_OK(db->DestroyColumnFamilyHandle(cfs[1]));`.
See following for a deterministic repro:
```
diff --git a/db/db_impl/db_impl.cc b/db/db_impl/db_impl.cc
index 196b428a3..4e7a834c4 100644
--- a/db/db_impl/db_impl.cc
+++ b/db/db_impl/db_impl.cc
@@ -956,10 +956,16 @@ void DBImpl::DumpStats() {
// near-atomically.
// Get a ref before unlocking
cfd->Ref();
+ if (cfd->GetName() == "cf1" || cfd->GetName() == "cf2") {
+ TEST_SYNC_POINT("DBImpl::DumpStats:PostCFDRef");
+ }
{
InstrumentedMutexUnlock u(&mutex_);
cfd->internal_stats()->CollectCacheEntryStats(/*foreground=*/false);
}
+ if (cfd->GetName() == "cf1" || cfd->GetName() == "cf2") {
+ TEST_SYNC_POINT("DBImpl::DumpStats::PreCFDUnrefAndTryDelete");
+ }
cfd->UnrefAndTryDelete();
}
}
diff --git a/db/db_logical_block_size_cache_test.cc b/db/db_logical_block_size_cache_test.cc
index 1057871c9..c3872c036 100644
--- a/db/db_logical_block_size_cache_test.cc
+++ b/db/db_logical_block_size_cache_test.cc
@@ -9,6 +9,7 @@
#include "env/io_posix.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
+#include "test_util/sync_point.h"
namespace ROCKSDB_NAMESPACE {
class EnvWithCustomLogicalBlockSizeCache : public EnvWrapper {
@@ -183,6 +184,15 @@ TEST_F(DBLogicalBlockSizeCacheTest, CreateColumnFamilies) {
ASSERT_EQ(1, cache_->GetRefCount(dbname_));
std::vector<ColumnFamilyHandle*> cfs;
+ ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
+ ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
+ {{"DBLogicalBlockSizeCacheTest::CreateColumnFamilies::PostSetupTwoCFH",
+ "DBImpl::DumpStats:StartRunning"},
+ {"DBImpl::DumpStats:PostCFDRef",
+ "DBLogicalBlockSizeCacheTest::CreateColumnFamilies::PreDeleteTwoCFH"},
+ {"DBLogicalBlockSizeCacheTest::CreateColumnFamilies::"
+ "PostFinishCheckingRef",
+ "DBImpl::DumpStats::PreCFDUnrefAndTryDelete"}});
ASSERT_OK(db->CreateColumnFamilies(cf_options, {"cf1", "cf2"}, &cfs));
ASSERT_EQ(2, cache_->Size());
ASSERT_TRUE(cache_->Contains(dbname_));
@@ -190,7 +200,7 @@ TEST_F(DBLogicalBlockSizeCacheTest, CreateColumnFamilies) {
ASSERT_TRUE(cache_->Contains(cf_path_0_));
ASSERT_EQ(2, cache_->GetRefCount(cf_path_0_));
}
// Delete one handle will not drop cache because another handle is still
// referencing cf_path_0_.
+ TEST_SYNC_POINT(
+ "DBLogicalBlockSizeCacheTest::CreateColumnFamilies::PostSetupTwoCFH");
+ TEST_SYNC_POINT(
+ "DBLogicalBlockSizeCacheTest::CreateColumnFamilies::PreDeleteTwoCFH");
ASSERT_OK(db->DestroyColumnFamilyHandle(cfs[0]));
ASSERT_EQ(2, cache_->Size());
ASSERT_TRUE(cache_->Contains(dbname_));
@@ -209,16 +221,20 @@ TEST_F(DBLogicalBlockSizeCacheTest, CreateColumnFamilies) {
ASSERT_TRUE(cache_->Contains(cf_path_0_));
// Will fail
ASSERT_EQ(1, cache_->GetRefCount(cf_path_0_));
// Delete the last handle will drop cache.
ASSERT_OK(db->DestroyColumnFamilyHandle(cfs[1]));
ASSERT_EQ(1, cache_->Size());
ASSERT_TRUE(cache_->Contains(dbname_));
// Will fail
ASSERT_EQ(1, cache_->GetRefCount(dbname_));
+ TEST_SYNC_POINT(
+ "DBLogicalBlockSizeCacheTest::CreateColumnFamilies::"
+ "PostFinishCheckingRef");
delete db;
ASSERT_EQ(0, cache_->Size());
ASSERT_OK(DestroyDB(dbname_, options,
{{"cf1", cf_options}, {"cf2", cf_options}}));
+ ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
}
```
**Summary**
- Removed the flaky assertion
- Clarified the comments for the test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9516
Test Plan:
- CI
- Monitor for future flakiness
Reviewed By: ajkr
Differential Revision: D34055232
Pulled By: hx235
fbshipit-source-id: 9bf83ae5fa88bf6fc829876494d4692082e4c357
|
3 years ago |
|
Hui Xiao
|
4a776d81cc |
Dynamic toggling of BlockBasedTableOptions::detect_filter_construct_corruption (#9654)
Summary: **Context/Summary:** As requested, `BlockBasedTableOptions::detect_filter_construct_corruption` can now be dynamically configured using `DB::SetOptions` after this PR Pull Request resolved: https://github.com/facebook/rocksdb/pull/9654 Test Plan: - New unit test Reviewed By: pdillinger Differential Revision: D34622609 Pulled By: hx235 fbshipit-source-id: c06773ef3d029e6bf1724d3a72dffd37a8ec66d9 |
3 years ago |
|
Yanqin Jin
|
659a16d52b |
Fix bug causing incorrect data returned by snapshot read (#9648)
Summary: This bug affects use cases that meet the following conditions - (has only the default column family or disables WAL) and - has at least one event listener - atomic flush is NOT affected. If the above conditions meet, then RocksDB can release the db mutex before picking all the existing memtables to flush. In the meantime, a snapshot can be created and db's sequence number can still be incremented. The upcoming flush will ignore this snapshot. A later read using this snapshot can return incorrect result. To fix this issue, we call the listeners callbacks after picking the memtables so that we avoid creating snapshots during this interval. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9648 Test Plan: make check Reviewed By: ajkr Differential Revision: D34555456 Pulled By: riversand963 fbshipit-source-id: 1438981e9f069a5916686b1a0ad7627f734cf0ee |
3 years ago |
|
Yuriy Chernyshov
|
73fd589b1a |
Do not rely on ADL when invoking std::max_element (#9608)
Summary: Certain STLs use raw pointers and ADL does not work for them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9608 Reviewed By: ajkr Differential Revision: D34583012 Pulled By: riversand963 fbshipit-source-id: 7de6bbc8a080c3e7243ce0d758fe83f1663168aa |
3 years ago |