350 Commits (efd035164b443e0ae552a82ad8b47a8048e652ca)

Author	SHA1	Message	Date
Peter Dillinger	efd035164b	Meta-internal folly integration with F14FastMap (#9546) ... Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94	3 years ago
gitbw95	f241d082b6	Prevent double caching in the compressed secondary cache (#9747) ... Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12	3 years ago
Peter Dillinger	6534c6dea4	Fix remaining uses of "backupable" (#9792) ... Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329	3 years ago
Yanqin Jin	3b6dc049f7	Support user-defined timestamps in write-committed txns (#9629) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43	3 years ago
Siddhartha Roychowdhury	21345d2823	Streaming Compression API for WAL compression. (#9619) ... Summary: Implement a streaming compression API (compress/uncompress) to use for WAL compression. The log_writer would use the compress class/API to compress a record before writing it out in chunks. The log_reader would use the uncompress class/API to uncompress the chunks and combine into a single record. Added unit test to verify the API for different sizes/compression types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9619 Test Plan: make -j24 check Reviewed By: anand1976 Differential Revision: D34437346 Pulled By: sidroyc fbshipit-source-id: b180569ad2ddcf3106380f8758b556cc0ad18382	3 years ago
Bo Wang	f706a9c199	Add a secondary cache implementation based on LRUCache 1 (#9518) ... Summary: **Summary:** RocksDB uses a block cache to reduce IO and make queries more efficient. The block cache is based on the LRU algorithm (LRUCache) and keeps objects containing uncompressed data, such as Block, ParsedFullFilterBlock etc. It allows the user to configure a second level cache (rocksdb::SecondaryCache) to extend the primary block cache by holding items evicted from it. Some of the major RocksDB users, like MyRocks, use direct IO and would like to use a primary block cache for uncompressed data and a secondary cache for compressed data. The latter allows us to mitigate the loss of the Linux page cache due to direct IO. This PR includes a concrete implementation of rocksdb::SecondaryCache that integrates with compression libraries such as LZ4 and implements an LRU cache to hold compressed blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9518 Test Plan: In this PR, the lru_secondary_cache_test.cc includes the following tests: 1. The unit tests for the secondary cache with either compression or no compression, such as basic tests, fails tests. 2. The integration tests with both primary cache and this secondary cache . **Follow Up:** 1. Statistics (e.g. compression ratio) will be added in another PR. 2. Once this implementation is ready, I will do some shadow testing and benchmarking with UDB to measure the impact. Reviewed By: anand1976 Differential Revision: D34430930 Pulled By: gitbw95 fbshipit-source-id: 218d78b672a2f914856d8a90ff32f2f5b5043ded	3 years ago
Patrick Somaru	f066b5cecb	update buckifier, add support for microbenchmarks (#9598) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9598 Reviewed By: jay-zhuang, hodgesds Differential Revision: D34130191 fbshipit-source-id: e5413f7d6af70a66940022d153b64a3383eccff1	3 years ago
Andrew Kryczka	babe56ddba	Add rate limiter priority to ReadOptions (#9424) ... Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c	3 years ago
mrambacher	aae3093719	Introduce a CountedFileSystem for counting file operations (#9283) ... Summary: Added a CountedFileSystem that tracks a number of file operations (opens, closes, deletes, renames, flushes, syncs, fsyncs, reads, writes). This class was based on the ReportFileOpEnv from db_bench. This is a stepping stone PR to be able to change the SpecialEnv into a SpecialFileSystem, where several of the file varieties wish to do operation counting. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9283 Reviewed By: pdillinger Differential Revision: D33062004 Pulled By: mrambacher fbshipit-source-id: d0d297a7fb9c48c06cbf685e5fa755c27193b6f5	3 years ago
Peter Dillinger	449029f865	Remove deprecated ObjectLibrary::Register() (and Regex public API) (#9439) ... Summary: Regexes are considered potentially problematic for use in registering RocksDB extensions, so we are removing ObjectLibrary::Register() and the Regex public API it depended on (now unused). In reference to https://github.com/facebook/rocksdb/issues/9389 Why? * The power of Regexes can make it hard to reason about which extension will match what. (The replacement API isn't perfect, but we are at least "holding the line" on patterns we have seen in practice.) * It is easy to make regexes that don't quite mean what you think they mean, such as forgetting that the `.` in `foo.bar` can match any character or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`. * Some regexes and implementations can have disastrously bad performance. This might not be much practical concern for ObjectLibray here, but we don't want to encourage potentially dangerous further use in production code. (Testing code is fine. See TestRegex.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439 Test Plan: CI Reviewed By: mrambacher Differential Revision: D33792342 Pulled By: pdillinger fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec	3 years ago
Yanqin Jin	50135c1bf3	Move HDFS support to separate repo (#9170) ... Summary: This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point, people can start from the example repo and fork. Java/JNI is not included yet, and needs to be done later if necessary. The goal is to include this commit in RocksDB 7.0 release. Reference: https://github.com/ajkr/dedupfs by ajkr Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170 Test Plan: Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress. make check Reviewed By: ajkr Differential Revision: D33751662 Pulled By: riversand963 fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f	3 years ago
mrambacher	423538a816	Make MemoryAllocator into a Customizable class (#8980) ... Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76	3 years ago
Peter Dillinger	0050a73a4f	New stable, fixed-length cache keys (#9126) ... Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f	3 years ago
Yanqin Jin	e05c2bb549	Stress test for RocksDB transactions (#8936) ... Summary: Current db_stress does not cover complex read-write transactions. Therefore, this PR adds coverage for emulated MyRocks-style transactions in `MultiOpsTxnsStressTest`. To achieve this, we need: - Add a new operation type 'customops' so that we can add new complex groups of operations, e.g. transactions involving multiple read-write operations. - Implement three read-write transactions and two read-only ones to emulate MyRocks-style transactions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8936 Test Plan: ``` make check ./db_stress -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=100000 ``` Next step is to add more configurability and refine input generation and result reporting, which will done in separate follow-up PRs. Reviewed By: zhichao-cao Differential Revision: D31071795 Pulled By: riversand963 fbshipit-source-id: 50d7c828346ec643311336b904848a1588a37006	3 years ago
Andrew Kryczka	ce42ae6ffd	Fix Statistics in db_stress (#9260) ... Summary: The `Statistics` objects are meant to be shared across translation units, but this was prevented by declaring them static. We need to ensure they are defined once in the program. The effect is now `StressTest::PrintStatistics()` can actually print statistics since it now sees non-null values when `--statistics=1`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9260 Reviewed By: zhichao-cao Differential Revision: D32910162 Pulled By: ajkr fbshipit-source-id: c926d6f556177987bee5fa3cbc87597803b230ee	3 years ago
Levi Tamasi	dc5de45af8	Support readahead during compaction for blob files (#9187) ... Summary: The patch adds a new BlobDB configuration option `blob_compaction_readahead_size` that can be used to enable prefetching data from blob files during compaction. This is important when using storage with higher latencies like HDDs or remote filesystems. If enabled, prefetching is used for all cases when blobs are read during compaction, namely garbage collection, compaction filters (when the existing value has to be read from a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187 Test Plan: Ran `make check` and the stress/crash test. Reviewed By: riversand963 Differential Revision: D32565512 Pulled By: ltamasi fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d	3 years ago
anand76	78556c14dd	Secondary cache error injection (#9002) ... Summary: Implement secondary cache error injection in db_stress. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9002 Reviewed By: zhichao-cao Differential Revision: D31874896 Pulled By: anand1976 fbshipit-source-id: 8cf04c061a4a44efa0fe88423d05cade67b85f73	3 years ago
Peter Dillinger	ad5325a736	Experimental support for SST unique IDs (#8990) ... Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243	3 years ago
Zhichao Cao	699f45049d	Introduce a mechanism to dump out blocks from block cache and re-insert to secondary cache (#8912) ... Summary: Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB. Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912 Test Plan: add new tests to lru_cache_test and pass make check. Reviewed By: pdillinger Differential Revision: D31452871 Pulled By: zhichao-cao fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48	3 years ago
Andrew Kryczka	559943cdc0	Refactor expected state in stress/crash test (#8913) ... Summary: This is a precursor refactoring to enable an upcoming feature: persistence failure correctness testing. - Changed `--expected_values_path` to `--expected_values_dir` and migrated "db_crashtest.py" to use the new flag. For persistence failure correctness testing there are multiple possible correct states since unsynced data is allowed to be dropped. Making it possible to restore all these possible correct states will eventually involve files containing snapshots of expected values and DB trace files. - The expected values directory is managed by an `ExpectedStateManager` instance. Managing expected state files is separated out of `SharedState` to prevent `SharedState` from becoming too complex when the new files and features (snapshotting, tracing, and restoring) are introduced. - Migrated expected values file access/management out of `SharedState` into a separate class called `ExpectedState`. This is not exposed directly to the test but rather the `ExpectedState` for the latest values file is accessed via a pass-through API on `ExpectedStateManager`. This forces the test to always access the single latest `ExpectedState`. - Changed the initialization of the latest expected values file to use a tempfile followed by rename, and also add cleanup logic for possible stranded tempfiles. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8913 Test Plan: run in several ways; try to make sure it's not obviously broken. - crashtest blackbox without TEST_TMPDIR ``` $ python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none ``` - crashtest blackbox with TEST_TMPDIR ``` $ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none ``` - crashtest whitebox with TEST_TMPDIR ``` $ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py whitebox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none --random_kill_odd=88887 ``` - db_stress without expected_values_dir ``` $ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=true ``` - db_stress with expected_values_dir and manual corruption ``` $ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=true --expected_values_dir=./ // modify one byte in "./LATEST.state" $ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=false --expected_values_dir=./ ... Verification failed for column family 0 key 0000000000000000 (0): Value not found: NotFound: ... ``` Reviewed By: riversand963 Differential Revision: D30921951 Pulled By: ajkr fbshipit-source-id: babfe218062e55d018c9b046536c0289fb78f41c	3 years ago
mrambacher	7fd68b7c39	Make WalFilter, SstPartitionerFactory, FileChecksumGenFactory, and TableProperties Customizable (#8638) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8638 Reviewed By: zhichao-cao Differential Revision: D31024729 Pulled By: mrambacher fbshipit-source-id: 954c04ccab0b8dee64050a27aadf78ed119106c0	3 years ago
Peter Dillinger	0ef88538c6	Improve support for using regexes (#8740) ... Summary: * Consolidate use of std::regex for testing to testharness.cc, to minimize Facebook linters constantly flagging uses in non-production code. * Improve syntax and error messages for asserting some string matches a regex in tests. * Add a public Regex wrapper class to encapsulate existing usage in ObjectRegistry. * Remove unnecessary include <regex> * Put warnings that use of Regex in production code could cause bad performance or stack overflow. Intended follow-up work: * Replace std::regex with another underlying implementation like RE2 * Improve ObjectRegistry interface in terms of possibly confusing literal string matching vs. regex and in terms of reporting invalid regex. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8740 Test Plan: tests updated, basic unit test for public Regex, and some manual testing of temporary changes to see example error messages: utilities/backupable/backupable_db_test.cc:917: Failure 000010_1162373755_138626.blob (child.name) does not match regex [0-9]+_[0-9]+_[0-9]+[.]blobHAHAHA (pattern) db/db_basic_test.cc:74: Failure R3SHSBA8C4U0CIMV2ZB0 (sid3) does not match regex [0-9A-Z]{20}HAHAHA Reviewed By: mrambacher Differential Revision: D30706246 Pulled By: pdillinger fbshipit-source-id: ba845e8f563ccad39bdb58f44f04e9da8f78c3fd	3 years ago
Peter Dillinger	13ded69484	Built-in support for generating unique IDs, bug fix (#8708) ... Summary: Env::GenerateUniqueId() works fine on Windows and on POSIX where /proc/sys/kernel/random/uuid exists. Our other implementation is flawed and easily produces collision in a new multi-threaded test. As we rely more heavily on DB session ID uniqueness, this becomes a serious issue. This change combines several individually suitable entropy sources for reliable generation of random unique IDs, with goal of uniqueness and portability, not cryptographic strength nor maximum speed. Specifically: * Moves code for getting UUIDs from the OS to port::GenerateRfcUuid rather than in Env implementation details. Callers are now told whether the operation fails or succeeds. * Adds an internal API GenerateRawUniqueId for generating high-quality 128-bit unique identifiers, by combining entropy from three "tracks": * Lots of info from default Env like time, process id, and hostname. * std::random_device * port::GenerateRfcUuid (when working) * Built-in implementations of Env::GenerateUniqueId() will now always produce an RFC 4122 UUID string, either from platform-specific API or by converting the output of GenerateRawUniqueId. DB session IDs now use GenerateRawUniqueId while DB IDs (not as critical) try to use port::GenerateRfcUuid but fall back on GenerateRawUniqueId with conversion to an RFC 4122 UUID. GenerateRawUniqueId is declared and defined under env/ rather than util/ or even port/ because of the Env dependency. Likely follow-up: enhance GenerateRawUniqueId to be faster after the first call and to guarantee uniqueness within the lifetime of a single process (imparting the same property onto DB session IDs). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8708 Test Plan: A new mini-stress test in env_test checks the various public and internal APIs for uniqueness, including each track of GenerateRawUniqueId individually. We can't hope to verify anywhere close to 128 bits of entropy, but it can at least detect flaws as bad as the old code. Serial execution of the new tests takes about 350 ms on my machine. Reviewed By: zhichao-cao, mrambacher Differential Revision: D30563780 Pulled By: pdillinger fbshipit-source-id: de4c9ff4b2f581cf784fcedb5f39f16e5185c364	3 years ago
Hui Xiao	74cfe7db60	Refactor WriteBufferManager::CacheRep into CacheReservationManager (#8506) ... Summary: Context: To help cap various memory usage by a single limit of the block cache capacity, we charge the memory usage through inserting/releasing dummy entries in the block cache. CacheReservationManager is such a class (non thread-safe) responsible for inserting/removing dummy entries to reserve cache space for memory used by the class user. - Refactored the inner private class CacheRep of WriteBufferManager into public CacheReservationManager class for reusability such as for https://github.com/facebook/rocksdb/pull/8428 - Encapsulated implementation details of cache key generation and dummy entries insertion/release in cache reservation as discussed in https://github.com/facebook/rocksdb/pull/8506#discussion_r666550838 - Consolidated increase/decrease cache reservation into one API - UpdateCacheReservation. - Adjusted the previous dummy entry release algorithm in decreasing cache reservation to be loop-releasing dummy entries to stay symmetric to dummy entry insertion algorithm - Made the previous dummy entry release algorithm in delayed decrease mode more aggressive for better decreasing cache reservation when memory used is less likely to increase back. Previously, the algorithms only release 1 dummy entries when new_mem_used < 3/4 * cache_allocated_size_ and cache_allocated_size_ - kSizeDummyEntry > new_mem_used. Now, the algorithms loop-releases as many dummy entries as possible when new_mem_used < 3/4 * cache_allocated_size_. - Updated WriteBufferManager's test cases to adapt to changes on the release algorithm mentioned above and left comment for some test cases for clarity - Replaced the previous cache key prefix generation (utilizing object address related to the cache client) with one that utilizes Cache->NewID() to prevent cache-key collision among dummy entry clients sharing the same cache. The specific collision we are preventing happens when the object address is reused for a new cache-key prefix while the old cache-key using that same object address in its prefix still exists in the cache. This could happen due to that, under LRU cache policy, there is a possible delay in releasing a cache entry after the cache client object owning that cache entry get deallocated. In this case, the object address related to the cache client object can get reused for other client object to generate a new cache-key prefix. This prefix generation can be made obsolete after Peter's unification of all the code generating cache key, mentioned in https://github.com/facebook/rocksdb/pull/8506#discussion_r667265255 Pull Request resolved: https://github.com/facebook/rocksdb/pull/8506 Test Plan: - Passing the added unit tests cache_reservation_manager_test.cc - Passing existing and adjusted write_buffer_manager_test.cc Reviewed By: ajkr Differential Revision: D29644135 Pulled By: hx235 fbshipit-source-id: 0fc93fbfe4a40bb41be85c314f8f2bafa8b741f7	3 years ago
Merlin Mao	d10801e983	Allow Replayer to report the results of TraceRecords. (#8657) ... Summary: `Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.) `Replayer::Replay()` reports the results via a callback function. New interface: `TraceRecordResult` in "rocksdb/trace_record_result.h". `DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657 Reviewed By: ajkr Differential Revision: D30290216 Pulled By: autopear fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6	3 years ago
Merlin Mao	f58d276764	Make TraceRecord and Replayer public (#8611) ... Summary: New public interfaces: `TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h". `Replayer`, available in `rocksdb/utilities/replayer.h`. User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file. Unit tests: - `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes. - `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611 Reviewed By: ajkr Differential Revision: D30266329 Pulled By: autopear fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8	3 years ago
mrambacher	d057e8326d	Make MergeOperator+CompactionFilter/Factory into Customizable Classes (#8481) ... Summary: - Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes. - Added Options/Configurable/Object Registration for TTL and Cassandra variants - Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option - Added tests for new functionality Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481 Reviewed By: zhichao-cao Differential Revision: D30136050 Pulled By: mrambacher fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af	3 years ago
Jay Zhuang	5dd18a8d8e	Add micro-benchmark support (#8493) ... Summary: Add google benchmark for microbench. Add ribbon_bench for benchmark ribbon filter vs. other filters. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8493 Test Plan: added test to CI To run the benchmark on devhost: Install benchmark: `$ sudo dnf install google-benchmark-devel` Build and run: `$ ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make microbench` or with cmake: `$ mkdir build && cd build && cmake .. -DCMAKE_BUILD_TYPE=Release -DWITH_BENCHMARK=1 && make microbench` Reviewed By: pdillinger Differential Revision: D29589649 Pulled By: jay-zhuang fbshipit-source-id: 8fed13b562bef4472f161ecacec1ab6b18911dff	3 years ago
Levi Tamasi	6adc39e1bf	Add an internal iterator that can measure the inflow of blobs (#8443) ... Summary: Follow-up to https://github.com/facebook/rocksdb/issues/8426 . The patch adds a new kind of `InternalIterator` that wraps another one and passes each key-value encountered to `BlobGarbageMeter` as inflow. This iterator will be used as an input iterator for compactions when the input SSTs reference blob files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8443 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D29311987 Pulled By: ltamasi fbshipit-source-id: b4493b4c0c0c2e3c2ecc33c8969a5ef02de5d9d8	3 years ago
Levi Tamasi	065bea1587	Add a class for measuring the amount of garbage generated during compaction (#8426) ... Summary: This is part of an alternative approach to https://github.com/facebook/rocksdb/issues/8316. Unlike that approach, this one relies on key-values getting processed one by one during compaction, and does not involve persistence. Specifically, the patch adds a class `BlobGarbageMeter` that can track the number and total size of blobs in a (sub)compaction's input and output on a per-blob file basis. This information can then be used to compute the amount of additional garbage generated by the compaction for any given blob file by subtracting the "outflow" from the "inflow." Note: this patch only adds `BlobGarbageMeter` and associated unit tests. I plan to hook up this class to the input and output of `CompactionIterator` in a subsequent PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8426 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D29242250 Pulled By: ltamasi fbshipit-source-id: 597e50ad556540e413a50e804ba15bc044d809bb	3 years ago
Akanksha Mahajan	3897ce3125	Support for Merge in Integrated BlobDB with base values (#8292) ... Summary: This PR add support for Merge operation in Integrated BlobDB with base values(i.e DB::Put). Merged values can be retrieved through DB::Get, DB::MultiGet, DB::GetMergeOperands and Iterator operation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8292 Test Plan: Add new unit tests Reviewed By: ltamasi Differential Revision: D28415896 Pulled By: akankshamahajan15 fbshipit-source-id: e9b3478bef51d2f214fb88c31ed3c8d2f4a531ff	3 years ago
Levi Tamasi	db325a5904	Add a clipping internal iterator (#8327) ... Summary: Logically, subcompactions process a key range [start, end); however, the way this is currently implemented is that the `CompactionIterator` for any given subcompaction keeps processing key-values until it actually outputs a key that is out of range, which is then discarded. Instead of doing this, the patch introduces a new type of internal iterator called `ClippingIterator` which wraps another internal iterator and "clips" its range of key-values so that any KVs returned are strictly in the [start, end) interval. This does eliminate a (minor) inefficiency by stopping processing in subcompactions exactly at the limit; however, the main motivation is related to BlobDB: namely, we need this to be able to measure the amount of garbage generated by a subcompaction precisely and prevent off-by-one errors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8327 Test Plan: `make check` Reviewed By: siying Differential Revision: D28761541 Pulled By: ltamasi fbshipit-source-id: ee0e7229f04edabbc7bed5adb51771fbdc287f69	3 years ago
Jay Zhuang	3786181a90	Add remote compaction public API (#8300) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8300 Reviewed By: ajkr Differential Revision: D28464726 Pulled By: jay-zhuang fbshipit-source-id: 49e9f4fb791808a6cbf39a7b1a331373f645fc5e	4 years ago
Peter Dillinger	311a544c2a	Use deleters to label cache entries and collect stats (#8297) ... Summary: This change gathers and publishes statistics about the kinds of items in block cache. This is especially important for profiling relative usage of cache by index vs. filter vs. data blocks. It works by iterating over the cache during periodic stats dump (InternalStats, stats_dump_period_sec) or on demand when DB::Get(Map)Property(kBlockCacheEntryStats), except that for efficiency and sharing among column families, saved data from the last scan is used when the data is not considered too old. The new information can be seen in info LOG, for example: Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0 Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%) And also through DB::GetProperty and GetMapProperty (here using ldb just for demonstration): $ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats rocksdb.block-cache-entry-stats.bytes.data-block: 0 rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0 rocksdb.block-cache-entry-stats.bytes.index-block: 178992 rocksdb.block-cache-entry-stats.bytes.misc: 0 rocksdb.block-cache-entry-stats.bytes.other-block: 0 rocksdb.block-cache-entry-stats.bytes.write-buffer: 0 rocksdb.block-cache-entry-stats.capacity: 8388608 rocksdb.block-cache-entry-stats.count.data-block: 0 rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-meta-block: 0 rocksdb.block-cache-entry-stats.count.index-block: 215 rocksdb.block-cache-entry-stats.count.misc: 1 rocksdb.block-cache-entry-stats.count.other-block: 0 rocksdb.block-cache-entry-stats.count.write-buffer: 0 rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290 rocksdb.block-cache-entry-stats.percent.data-block: 0.000000 rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000 rocksdb.block-cache-entry-stats.percent.index-block: 2.133751 rocksdb.block-cache-entry-stats.percent.misc: 0.000000 rocksdb.block-cache-entry-stats.percent.other-block: 0.000000 rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000 rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052 rocksdb.block-cache-entry-stats.secs_since_last_collection: 0 Solution detail - We need some way to flag what kind of blocks each entry belongs to, preferably without changing the Cache API. One of the complications is that Cache is a general interface that could have other users that don't adhere to whichever convention we decide on for keys and values. Or we would pay for an extra field in the Handle that would only be used for this purpose. This change uses a back-door approach, the deleter, to indicate the "role" of a Cache entry (in addition to the value type, implicitly). This has the added benefit of ensuring proper code origin whenever we recognize a particular role for a cache entry; if the entry came from some other part of the code, it will use an unrecognized deleter, which we simply attribute to the "Misc" role. An internal API makes for simple instantiation and automatic registration of Cache deleters for a given value type and "role". Another internal API, CacheEntryStatsCollector, solves the problem of caching the results of a scan and sharing them, to ensure scans are neither excessive nor redundant so as not to harm Cache performance. Because code is added to BlocklikeTraits, it is pulled out of block_based_table_reader.cc into its own file. This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option (could still be added), and with actual stat gathering. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297 Test Plan: manual testing with db_bench, and a couple of basic unit tests Reviewed By: ltamasi Differential Revision: D28488721 Pulled By: pdillinger fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb	4 years ago
anand76	13232e11d4	Allow cache_bench/db_bench to use a custom secondary cache (#8312) ... Summary: This PR adds a ```-secondary_cache_uri``` option to the cache_bench and db_bench tools to allow the user to specify a custom secondary cache URI. The object registry is used to create an instance of the ```SecondaryCache``` object of the type specified in the URI. The main cache_bench code is packaged into a separate library, similar to db_bench. An example invocation of db_bench with a secondary cache URI - ```db_bench --env_uri=ws://ws.flash_sandbox.vll1_2/ -db=anand/nvm_cache_2 -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=67108864 -cache_index_and_filter_blocks=true -secondary_cache_uri='cachelibwrapper://filename=/home/anand76/nvm_cache/cache_file;size=2147483648;regionSize=16777216;admPolicy=random;admProbability=1.0;volatileSize=8388608;bktPower=20;lockPower=12' -partition_index_and_filters=true -duration=1800``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8312 Reviewed By: zhichao-cao Differential Revision: D28544325 Pulled By: anand1976 fbshipit-source-id: 8f209b9af900c459dc42daa7a610d5f00176eeed	4 years ago
sdong	c3ff14e2c1	Hint temperature of bottommost level files to FileSystem (#8222) ... Summary: As the first part of the effort of having placing different files on different storage types, this change introduces several things: (1) An experimental interface in FileSystem that specify temperature to a new file created. (2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature. (3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file. (4) A db_bench parameter that applies the (2) and (3) to db_bench. The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222 Test Plan: ./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000 followed by ./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000 and see results as expected. Reviewed By: ajkr Differential Revision: D28003028 fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce	4 years ago
Akanksha Mahajan	596e9008e4	Stall writes in WriteBufferManager when memory_usage exceeds buffer_size (#7898) ... Summary: When WriteBufferManager is shared across DBs and column families to maintain memory usage under a limit, OOMs have been observed when flush cannot finish but writes continuously insert to memtables. In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write, this change will stall incoming writers until flush is completed and memory_usage drops. Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_ (memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true. DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall() (which adds dummy stall object to the writer's queue). Then DB is blocked on a state State::Blocked (current write doesn't go through). WBStallInterface object maintained by every DB instance is added to the queue of WriteBufferManager. If multiple DBs tries to write during this stall, they will also be blocked when check WriteBufferManager::ShouldStall() returns true. End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush to complete and avoid continous stalling if memory usage remains close to buffer_size. WriterBufferManager::EndWriteStall() is called, which removes all instances from its queue and signal them to continue. Their state is changed to State::Running and they are unblocked. DBImpl then signal all incoming writers of that DB to continue by calling write_thread_.EndWriteStall() (which removes dummy stall object from the queue). DB instance creates WBMStallInterface which is an interface to block and signal DBs during stall. When DB needs to be blocked or signalled by WriteBufferManager, state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED). Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898 Test Plan: Added a new test db/db_write_buffer_manager_test.cc Reviewed By: anand1976 Differential Revision: D26093227 Pulled By: akankshamahajan15 fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae	4 years ago
Xavier Deguillard	8972dd1ffa	Add util/crc32c_arm64.cc to TARGETS (#8168) ... Summary: When compiling RocksDB with Buck for ARM64, the linker complains about missing crc32 symbols that are defined in the crc32c_arm64.cc file. Since this file wasn't included in the build this is totally expected Pull Request resolved: https://github.com/facebook/rocksdb/pull/8168 Test Plan: The following no longer fails to link rocksdb: buck build mode/mac-xcode //eden/fs/service:edenfs#macosx-arm64 Reviewed By: zhichao-cao Differential Revision: D27664627 Pulled By: xavierd fbshipit-source-id: fb9d7a538599ee7a08882f87628731de6e641f8d	4 years ago
Peter Dillinger	879357fdb0	Make backups openable as read-only DBs (#8142) ... Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148	4 years ago
Peter Dillinger	bd7ddf58cb	Make tests "parallel" and "passing ASC" by default (#8146) ... Summary: New tests should by default be expected to be parallelizeable and passing with ASSERT_STATUS_CHECKED. Thus, I'm changing those two lists to exclusions rather than inclusions. For the set of exclusions, I only listed things that currently failed for me when attempting not to exclude, or had some other documented reason. This marks many more tests as "parallel," which will potentially cause some failures from self-interference, but we can address those as they are discovered. Also changed CircleCI ASC test to be parallelized; the easy way to do that is to exclude building tests that don't pass ASC, which is now a small set. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8146 Test Plan: Watch CI, etc. Reviewed By: riversand963 Differential Revision: D27542782 Pulled By: pdillinger fbshipit-source-id: bdd74bcd912a963ee33f3fc0d2cad2567dc7740f	4 years ago
Adam Retter	24b7ebee80	range_tree requires GNU libc on ppc64 (#8070) ... Summary: If the platform is ppc64 and the libc is not GNU libc, then we exclude the range_tree from compilation. See https://jira.percona.com/browse/PS-7559 Pull Request resolved: https://github.com/facebook/rocksdb/pull/8070 Reviewed By: jay-zhuang Differential Revision: D27246004 Pulled By: mrambacher fbshipit-source-id: 59d8433242ce7ce608988341becb4f83312445f5	4 years ago
Yanqin Jin	9f7c02dad5	Move compacted_db_impl.[c|h] to db/db_impl (#8082) ... Summary: As title. All core db implementations should stay in db_impl. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8082 Test Plan: make check Reviewed By: ajkr Differential Revision: D27211442 Pulled By: riversand963 fbshipit-source-id: e0953fde75064740e899aaff7989ff033b7f5232	4 years ago
Xiaopeng Zhang	c603f2f898	support getUsage and getPinnedUsage in JavaAPI for Cache (#7925) ... Summary: support getUsage and getPinnedUsage in JavaAPI for Cache also fix a typo in LRUCacheTest.java that the highPriPoolRatio is not valid(set 5, I guess it means 0.05) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7925 Reviewed By: mrambacher Differential Revision: D26900241 Pulled By: ajkr fbshipit-source-id: 735d1e40a16fa8919c89c7c7154ba7f81208ec33	4 years ago
Yanqin Jin	85d4f2c8b3	Move a test file to a better location (#8054) ... Summary: As title. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8054 Test Plan: make check Reviewed By: mrambacher Differential Revision: D27017955 Pulled By: riversand963 fbshipit-source-id: 829497d507bc89afbe982f8a8cf3555e52fd7098	4 years ago
Peter Dillinger	4b18c46d10	Refactor: add LineFileReader and Status::MustCheck (#8026) ... Summary: Removed confusing, awkward, and undocumented internal API ReadOneLine and replaced with very simple LineFileReader. In refactoring backupable_db.cc, this has the side benefit of removing the arbitrary cap on the size of backup metadata files. Also added Status::MustCheck to make it easy to mark a Status as "must check." Using this, I can ensure that after LineFileReader::ReadLine returns false the caller checks GetStatus(). Also removed some excessive conditional compilation in status.h Pull Request resolved: https://github.com/facebook/rocksdb/pull/8026 Test Plan: added unit test, and running tests with ASSERT_STATUS_CHECKED Reviewed By: mrambacher Differential Revision: D26831687 Pulled By: pdillinger fbshipit-source-id: ef749c265a7a26bb13cd44f6f0f97db2955f6f0f	4 years ago
Peter Dillinger	a8b3b9a20c	Refine Ribbon configuration, improve testing, add Homogeneous (#7879) ... Summary: This change only affects non-schema-critical aspects of the production candidate Ribbon filter. Specifically, it refines choice of internal configuration parameters based on inputs. The changes are minor enough that the schema tests in bloom_test, some of which depend on this, are unaffected. There are also some minor optimizations and refactorings. This would be a schema change for "smash" Ribbon, to fix some known issues with small filters, but "smash" Ribbon is not accessible in public APIs. Unit test CompactnessAndBacktrackAndFpRate updated to test small and medium-large filters. Run with --thoroughness=100 or so for much better detection power (not appropriate for continuous regression testing). Homogenous Ribbon: This change adds internally a Ribbon filter variant we call Homogeneous Ribbon, in collaboration with Stefan Walzer. The expected "result" value for every key is zero, instead of computed from a hash. Entropy for queries not to be false positives comes from free variables ("overhead") in the solution structure, which are populated pseudorandomly. Construction is slightly faster for not tracking result values, and never fails. Instead, FP rate can jump up whenever and whereever entries are packed too tightly. For small structures, we can choose overhead to make this FP rate jump unlikely, as seen in updated unit test CompactnessAndBacktrackAndFpRate. Unlike standard Ribbon, Homogeneous Ribbon seems to scale to arbitrary number of keys when accepting an FP rate penalty for small pockets of high FP rate in the structure. For example, 64-bit ribbon with 8 solution columns and 10% allocated space overhead for slots seems to achieve about 10.5% space overhead vs. information-theoretic minimum based on its observed FP rate with expected pockets of degradation. (FP rate is close to 1/256.) If targeting a higher FP rate with fewer solution columns, Homogeneous Ribbon can be even more space efficient, because the penalty from degradation is relatively smaller. If targeting a lower FP rate, Homogeneous Ribbon is less space efficient, as more allocated overhead is needed to keep the FP rate impact of degradation relatively under control. The new OptimizeHomogAtScale tool in ribbon_test helps to find these optimal allocation overheads for different numbers of solution columns. And Ribbon widths, with 128-bit Ribbon apparently cutting space overheads in half vs. 64-bit. Other misc item specifics: * Ribbon APIs in util/ribbon_config.h now provide configuration data for not just 5% construction failure rate (95% success), but also 50% and 0.1%. * Note that the Ribbon structure does not exhibit "threshold" behavior as standard Xor filter does, so there is a roughly fixed space penalty to cut construction failure rate in half. Thus, there isn't really an "almost sure" setting. * Although we can extrapolate settings for large filters, we don't have a good formula for configuring smaller filters (< 2^17 slots or so), and efforts to summarize with a formula have failed. Thus, small data is hard-coded from updated FindOccupancy tool. * Enhances ApproximateNumEntries for public API Ribbon using more precise data (new API GetNumToAdd), thus a more accurate but not perfect reversal of CalculateSpace. (bloom_test updated to expect the greater precision) * Move EndianSwapValue from coding.h to coding_lean.h to keep Ribbon code easily transferable from RocksDB * Add some missing 'const' to member functions * Small optimization to 128-bit BitParity * Small refactoring of BandingStorage in ribbon_alg.h to support Homogeneous Ribbon * CompactnessAndBacktrackAndFpRate now has an "expand" test: on construction failure, a possible alternative to re-seeding hash functions is simply to increase the number of slots (allocated space overhead) and try again with essentially the same hash values. (Start locations will be different roundings of the same scaled hash values--because fastrange not mod.) This seems to be as effective or more effective than re-seeding, as long as we increase the number of slots (m) by roughly m += m/w where w is the Ribbon width. This way, there is effectively an expansion by one slot for each ribbon-width window in the banding. (This approach assumes that getting "bad data" from your hash function is as unlikely as it naturally should be, e.g. no adversary.) * 32-bit and 16-bit Ribbon configurations are added to ribbon_test for understanding their behavior, e.g. with FindOccupancy. They are not considered useful at this time and not tested with CompactnessAndBacktrackAndFpRate. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7879 Test Plan: unit test updates included Reviewed By: jay-zhuang Differential Revision: D26371245 Pulled By: pdillinger fbshipit-source-id: da6600d90a3785b99ad17a88b2a3027710b4ea3a	4 years ago
Yanqin Jin	cef4a6c49f	Compaction filter support for (new) BlobDB (#7974) ... Summary: Allow applications to implement a custom compaction filter and pass it to BlobDB. The compaction filter's custom logic can operate on blobs. To do so, application needs to subclass `CompactionFilter` abstract class and implement `FilterV2()` method. Optionally, a method called `ShouldFilterBlobByKey()` can be implemented if application's custom logic rely solely on the key to make a decision without reading the blob, thus saving extra IO. Examples can be found in db/blob/db_blob_compaction_test.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7974 Test Plan: make check Reviewed By: ltamasi Differential Revision: D26509280 Pulled By: riversand963 fbshipit-source-id: 59f9ae5614c4359de32f4f2b16684193cc537b39	4 years ago
Akanksha Mahajan	46cf5fbfdd	Extend VerifyFileChecksums API for blob files (#7979) ... Summary: Extend VerifyFileChecksums API to verify blob files in case of use_file_checksum. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7979 Test Plan: New unit test db_blob_corruption_test Reviewed By: ltamasi Differential Revision: D26534040 Pulled By: akankshamahajan15 fbshipit-source-id: 7dc5951a3df9d265ea1265e0122b43c966856ade	4 years ago
Andrew Kryczka	78ee8564ad	Integrity protection for live updates to WriteBatch (#7748) ... Summary: This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.). The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer. When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748 Test Plan: - an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught - add to stress/crash test to verify it works in variety of configs/operations without intentional corruption - [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc. Reviewed By: pdillinger Differential Revision: D25754492 Pulled By: ajkr fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866	4 years ago
mrambacher	12f1137355	Add a SystemClock class to capture the time functions of an Env (#7858) ... Summary: Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock. Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock. There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc). Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858 Reviewed By: pdillinger Differential Revision: D26006406 Pulled By: mrambacher fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90	4 years ago