24 Commits (f4e4039f007f5b7083ecd3a845e9a6638e2b6cf2)

Author	SHA1	Message	Date
Peter Dillinger	7a1b0207e6	format_version=6 and context-aware block checksums (#9058) ... Summary: ## Context checksum All RocksDB checksums currently use 32 bits of checking power, which should be 1 in 4 billion false negative (FN) probability (failing to detect corruption). This is true for random corruptions, and in some cases small corruptions are guaranteed to be detected. But some possible corruptions, such as in storage metadata rather than storage payload data, would have a much higher FN rate. For example: * Data larger than one SST block is replaced by data from elsewhere in the same or another SST file. Especially with block_align=true, the probability of exact block size match is probably around 1 in 100, making the FN probability around that same. Without `block_align=true` the probability of same block start location is probably around 1 in 10,000, for FN probability around 1 in a million. To solve this problem in new format_version=6, we add "context awareness" to block checksum checks. The stored and expected checksum value is modified based on the block's position in the file and which file it is in. The modifications are cleverly chosen so that, for example * blocks within about 4GB of each other are guaranteed to use different context * blocks that are offset by exactly some multiple of 4GiB are guaranteed to use different context * files generated by the same process are guaranteed to use different context for the same offsets, until wrap-around after 2^32 - 1 files Thus, with format_version=6, if a valid SST block and checksum is misplaced, its checksum FN probability should be essentially ideal, 1 in 4B. ## Footer checksum This change also adds checksum protection to the SST footer (with format_version=6), for the first time without relying on whole file checksum. To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to defeat the footer checksum, we change much of the footer data format including an "extended magic number" in format_version 6 that would be interpreted as empty index and metaindex block handles in older footer versions. We also change the encoding of handles to free up space for other new data in footer. ## More detail: making space in footer In order to keep footer the same size in format_version=6 (avoid change to IO patterns), we have to free up some space for new data. We do this two ways: * Metaindex block handle is encoded down to 4 bytes (from 10) by assuming it immediately precedes the footer, and by assuming it is < 4GB. * Index block handle is moved into metaindex. (I don't know why it was in footer to begin with.) ## Performance In case of small performance penalty, I've made a "pay as you go" optimization to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep with the only field used in that structure after construction: `prefix_extractor`. This makes the PR an overall performance improvement (results below). Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6, even including that improvement for both. That's based on extreme case table write performance testing, many files with many blocks. This is relatively checksum intensive (small blocks) and salt generation intensive (small files). ``` (for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out ``` Each value below is ops/s averaged over 100 runs, run simultaneously with competing configuration for load fairness Before -> after (both fv=5): 483530 -> 483673 (negligible) Re-run 1: 480733 -> 485427 (1.0% faster) Re-run 2: 483821 -> 484541 (0.1% faster) Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster) Re-run 1: 482212 -> 485075 (0.6% faster) Re-run 2: 483590 -> 484073 (0.1% faster) After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster) Re-run 1: 485331 -> 483385 (0.4% slower) Re-run 2: 485283 -> 483435 (0.4% slower) Re-run 3: 483647 -> 486109 (0.5% faster) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058 Test Plan: unit tests included (table_test, db_properties_test, salt in env_test). General DB tests and crash test updated to test new format_version. Also temporarily updated the default format version to 6 and saw some test failures. Almost all were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum, though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block checksum, just assuming it was verified in opening the index reader (probably *usually* true but probably not always true). Some other concerns about VerifyChecksum are left in FIXME comments. The only remaining test failure on change of default (in block_fetcher_test) now has a comment about how to upgrade the test. The format compatibility test does not need updating because we have not updated the default format_version. Reviewed By: ajkr, mrambacher Differential Revision: D33100915 Pulled By: pdillinger fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee	1 year ago
Hui Xiao	8f763bdeab	Record and use the tail size to prefetch table tail (#11406) ... Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064	2 years ago
Changyu Bi	62fc15f009	Block per key-value checksum (#11287) ... Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940	2 years ago
sdong	4720ba4391	Remove RocksDB LITE (#11147) ... Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2	2 years ago
Peter Dillinger	433d7e4594	Improve error messages for SST footer and size errors (#11009) ... Summary: Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure: * Magic number error is reported first if we attempt to open an SST file and the footer is completely bad. * Footer errors are reported with affected file. * If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009 Test Plan: unit tests added, some manual Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed). Reviewed By: siying Differential Revision: D41656272 Pulled By: pdillinger fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df	2 years ago
mrambacher	423538a816	Make MemoryAllocator into a Customizable class (#8980) ... Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76	3 years ago
mrambacher	13ae16c315	Cleanup includes in dbformat.h (#8930) ... Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d	3 years ago
Levi Tamasi	d83542ca83	Make it possible to apply only a subrange of table property collectors (#8298) ... Summary: This patch does two things: 1) Introduces some aliases in order to eliminate/prevent long-winded type names w/r/t the internal table property collectors (see e.g. `std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`). 2) Makes it possible to apply only a subrange of table property collectors during table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories` from a pointer to a `vector` into a range (i.e. a pair of iterators). Rationale: I plan to introduce a BlobDB related table property collector, which should only be applied during table creation if blob storage is enabled at the moment (which can be changed dynamically). This change will make it possible to include/ exclude the BlobDB related collector as needed without having to introduce a second `vector` of collectors in `ColumnFamilyData` with pretty much the same contents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D28430910 Pulled By: ltamasi fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e	4 years ago
mrambacher	8948dc8524	Make ImmutableOptions struct that inherits from ImmutableCFOptions and ImmutableDBOptions (#8262) ... Summary: The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form). Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes. Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262 Reviewed By: pdillinger Differential Revision: D28226540 Pulled By: mrambacher fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf	4 years ago
Peter Dillinger	d2ca04e3ed	Add more LSM info to FilterBuildingContext (#8246) ... Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a	4 years ago
Peter Dillinger	85becd94c1	Refactor: use TableBuilderOptions to reduce parameter lists (#8240) ... Summary: Greatly reduced the not-quite-copy-paste giant parameter lists of rocksdb::NewTableBuilder, rocksdb::BuildTable, BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor. Moved weird separate parameter `uint32_t column_family_id` of TableFactory::NewTableBuilder into TableBuilderOptions. Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t target_file_size` is not randomly placed between uint64_t timestamps (was easy to mix up). Replaced a couple of fields of BlockBasedTableBuilder::Rep with a FilterBuildingContext. The motivation for this change is making it easier to pass along more data into new fields in FilterBuildingContext (follow-up PR). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240 Test Plan: ASAN make check Reviewed By: mrambacher Differential Revision: D28075891 Pulled By: pdillinger fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f	4 years ago
Andrew Kryczka	c20a7cd6c7	Apply `sample_for_compression` to all block-based tables (#8105) ... Summary: Previously it only applied to block-based tables generated by flush. This restriction was undocumented and blocked a new use case. Now compression sampling applies to all block-based tables we generate when it is enabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105 Test Plan: new unit test Reviewed By: riversand963 Differential Revision: D27317275 Pulled By: ajkr fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0	4 years ago
mrambacher	3dff28cf9b	Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033) ... Summary: For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes. For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource. There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved. Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17: 6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found) 6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found) PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found) (Note that the times for 6.18 are prior to revert of the SystemClock). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033 Reviewed By: pdillinger Differential Revision: D27014563 Pulled By: mrambacher fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67	4 years ago
sherriiiliu	e017af15c1	Fix testcase failures on windows (#7992) ... Summary: Fixed 5 test case failures found on Windows 10/Windows Server 2016 1. In `flush_job_test`, the DestroyDir function fails in deconstructor because some file handles are still being held by VersionSet. This happens on Windows Server 2016, so need to manually reset versions_ pointer to release all file handles. 2. In `StatsHistoryTest.InMemoryStatsHistoryPurging` test, the capping memory cost of stats_history_size on Windows becomes 14000 bytes with latest changes, not just 13000 bytes. 3. In `SSTDumpToolTest.RawOutput` test, the output file handle is not closed at the end. 4. In `FullBloomTest.OptimizeForMemory` test, ROCKSDB_MALLOC_USABLE_SIZE is undefined on windows so `total_mem` is always equal to `total_size`. The internal memory fragmentation assertion does not apply in this case. 5. In `BlockFetcherTest.FetchAndUncompressCompressedDataBlock` test, XPRESS cannot reach 87.5% compression ratio with original CreateTable method, so I append extra zeros to the string value to enhance compression ratio. Beside, since XPRESS allocates memory internally, thus does not support for custom allocator verification, we will skip the allocator verification for XPRESS Pull Request resolved: https://github.com/facebook/rocksdb/pull/7992 Reviewed By: jay-zhuang Differential Revision: D26615283 Pulled By: ajkr fbshipit-source-id: 3632612f84b99e2b9c77c403b112b6bedf3b125d	4 years ago
mrambacher	4a09d632c4	Remove Legacy and Custom FileWrapper classes from header files (#7851) ... Summary: Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem. Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851 Reviewed By: anand1976 Differential Revision: D26114816 Pulled By: mrambacher fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150	4 years ago
mrambacher	12f1137355	Add a SystemClock class to capture the time functions of an Env (#7858) ... Summary: Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock. Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock. There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc). Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858 Reviewed By: pdillinger Differential Revision: D26006406 Pulled By: mrambacher fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90	4 years ago
Akanksha Mahajan	5997f6b17b	Add Status check enforcement for unit tests (#7464) ... Summary: Add status check for unit tests : block_based_filter_block_test, block_fetcher_test, full_filter_block_test and partitioned_filter_block_test Pull Request resolved: https://github.com/facebook/rocksdb/pull/7464 Reviewed By: zhichao-cao Differential Revision: D24011309 Pulled By: akankshamahajan15 fbshipit-source-id: d814803f94e8bb8b811ef170d20b22d52c1a3ff2	4 years ago
mrambacher	7d472accdc	Bring the Configurable options together (#5753) ... Summary: This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753 Reviewed By: ajkr Differential Revision: D23385030 Pulled By: zhichao-cao fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a	4 years ago
mrambacher	c7c7b07f06	More Makefile Cleanup (#7097) ... Summary: Cleans up some of the dependencies on test code in the Makefile while building tools: - Moves the test::RandomString, DBBaseTest::RandomString into Random - Moves the test::RandomHumanReadableString into Random - Moves the DestroyDir method into file_utils - Moves the SetupSyncPointsToMockDirectIO into sync_point. - Moves the FaultInjection Env and FS classes under env These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated. Tested both release and debug builds via Make and CMake for both static and shared libraries. More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097 Reviewed By: riversand963 Differential Revision: D22463160 Pulled By: pdillinger fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2	4 years ago
Andrew Kryczka	8458532d58	Skip unnecessary allocation for mmap reads under 5000 bytes (#7043) ... Summary: With mmap enabled on an uncompressed file, we were previously always doing a heap allocation to obtain the scratch buffer for `RandomAccessFileReader::Read()`. However, that allocation was unnecessary as the underlying file reader returned a pointer into its mapped memory, not the provided scratch buffer. This PR makes passes the `BlockFetcher`'s inline buffer as the scratch buffer if the data block is small enough (less than `kDefaultStackBufferSize` bytes, currently 5000). Ideally we would not pass a scratch buffer at all for an mmap read; however, the `RandomAccessFile::Read()` API guarantees such a buffer is provided, and non-standard implementations may be relying on it even when `Options::allow_mmap_reads == true`. In that case, this PR still works but introduces an extra copy from the inline buffer to a heap buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7043 Reviewed By: cheng-chang Differential Revision: D22320606 Pulled By: ajkr fbshipit-source-id: ad964dd23df34e07d979c6032c2dfe5454c98b52	4 years ago
Anand Ananthabhotla	9a5886bd8c	Extend Get/MultiGet deadline support to table open (#6982) ... Summary: Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open. The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future. Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982 Test Plan: Add new unit tests in db_basic_test Reviewed By: riversand963 Differential Revision: D22219515 Pulled By: anand1976 fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b	4 years ago
Andrew Kryczka	292bcf6227	skip direct I/O tests in rocksdb lite (#6867) ... Summary: Fix a couple places where direct I/O was used even though it is unsupported in lite builds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6867 Test Plan: `LITE=1 make check -j48` Reviewed By: pdillinger Differential Revision: D21689185 Pulled By: ajkr fbshipit-source-id: 3eaa3abf69cd7d0bcaabbcad3bb5a26fb8dd7301	5 years ago
Cheng Chang	91b7553293	Enable IO Uring in MultiGet in direct IO mode (#6815) ... Summary: Currently, in direct IO mode, `MultiGet` retrieves the data blocks one by one instead of in parallel, see `BlockBasedTable::RetrieveMultipleBlocks`. Since direct IO is supported in `RandomAccessFileReader::MultiRead` in https://github.com/facebook/rocksdb/pull/6446, this PR applies `MultiRead` to `MultiGet` so that the data blocks can be retrieved in parallel. Also, in direct IO mode and when data blocks are compressed and need to uncompressed, this PR only allocates one continuous aligned buffer to hold the data blocks, and then directly uncompress the blocks to insert into block cache, there is no longer intermediate copies to scratch buffers. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6815 Test Plan: 1. added a new unit test `BlockBasedTableReaderTest::MultiGet`. 2. existing unit tests and stress tests contain tests against `MultiGet` in direct IO mode. Reviewed By: anand1976 Differential Revision: D21426347 Pulled By: cheng-chang fbshipit-source-id: b8446ae0e74152444ef9111e97f8e402ac31b24f	5 years ago
Cheng Chang	40497a875a	Reduce memory copies when fetching and uncompressing blocks from SST files (#6689) ... Summary: In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode. This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode. Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`. In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689 Test Plan: A new unit test `block_fetcher_test` is added. Reviewed By: anand1976 Differential Revision: D21006729 Pulled By: cheng-chang fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980	5 years ago