Summary:
For flush triggered by RocksDB due to memory usage approaching certain
threshold (WriteBufferManager or Memtable full), we should cut the memtable
only when the current active memtable is not empty, i.e. contains data. This is
what we do for non-atomic flush. If we always cut memtable even when the active
memtable is empty, we will generate extra, empty immutable memtable.
This is not ideal since it may cause write stall. It also causes some
DBAtomicFlushTest to fail because cfd->imm()->NumNotFlushed() is different from
expectation.
Test plan
```
$make clean && make J=1 -j32 all check
$make clean && OPT="-DROCKSDB_LITE -g" make J=1 -j32 all check
$make clean && TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=1 -j32 valgrind_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4595
Differential Revision: D12818520
Pulled By: riversand963
fbshipit-source-id: d867bdbeacf4199fdd642debb085f94703c41a18
Summary:
Introduce `JemallocNodumpAllocator`, which allow exclusion of block cache usage from core dump. It utilize custom hook of jemalloc arena, and when jemalloc arena request memory from system, the allocator use the hook to set `MADV_DONTDUMP ` to the memory. The implementation is basically the same as `folly::JemallocNodumpAllocator`, except for some minor difference:
1. It only support jemalloc >= 5.0
2. When the allocator destruct, it explicitly destruct the corresponding arena via `arena.<i>.destroy` via `mallctl`.
Depending on #4502.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4534
Differential Revision: D10435474
Pulled By: yiwu-arbug
fbshipit-source-id: e80edea755d3853182485d2be710376384ce0bb4
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
Summary:
Currently there are two contrun test failures:
* rocksdb-contrun-lite:
> tools/db_bench_tool.cc: In function ‘int rocksdb::db_bench_tool(int, char**)’:
tools/db_bench_tool.cc:5814:5: error: ‘DumpMallocStats’ is not a member of ‘rocksdb’
rocksdb::DumpMallocStats(&stats_string);
^
make: *** [tools/db_bench_tool.o] Error 1
* rocksdb-contrun-unity:
> In file included from unity.cc:44:0:
db/range_tombstone_fragmenter.cc: In member function ‘void rocksdb::FragmentedRangeTombstoneIterator::FragmentTombstones(std::unique_ptr<rocksdb::InternalIteratorBase<rocksdb::Slice> >, rocksdb::SequenceNumber)’:
db/range_tombstone_fragmenter.cc:90:14: error: reference to ‘ParsedInternalKeyComparator’ is ambiguous
auto cmp = ParsedInternalKeyComparator(icmp_);
This PR will fix them
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4587
Differential Revision: D10846554
Pulled By: miasantreble
fbshipit-source-id: 8d3358879e105060197b1379c84aecf51b352b93
Summary:
1. `WriteBufferManager` should have a reference alive in Java side through `Options`/`DBOptions` otherwise, if it's GC'ed at java side, native side can seg fault.
2. native method `setWriteBufferManager()` in `DBOptions.java` doesn't have it's jni method invocation in rocksdbjni which is added in this PR
3. `DBOptionsTest.java` is referencing object of `Options`. Instead it should be testing against `DBOptions`. Seems like a copy paste error.
4. Add a getter for WriteBufferManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4579
Differential Revision: D10561150
Pulled By: sagar0
fbshipit-source-id: 139a15c7f051a9f77b4200215b88267b48fbc487
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
PR https://github.com/facebook/rocksdb/pull/4226 introduced per-level perf context which allows breaking down perf context by levels.
This PR takes advantage of the feature to populate a few counters related to bloom filters
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4581
Differential Revision: D10518010
Pulled By: miasantreble
fbshipit-source-id: 011244561783ec860d32d5b0fa6bce6e78d70ef8
Summary:
SetId and GetId are the experimental API that so far being used in WritePrepared and WriteUnPrepared transactions, where the id is assigned at the prepare time. The patch extends the API to WriteCommitted transactions, by setting the id at commit time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4565
Differential Revision: D10557862
Pulled By: maysamyabandeh
fbshipit-source-id: 2b27a140682b6185a4988fa88f8152628e0d67af
Summary:
`WritableFileWrapper` was missing some newer methods that were added to `WritableFile`. Without these functions, the missing wrapper methods would fallback to using the default implementations in WritableFile instead of using the corresponding implementations in, say, `PosixWritableFile` or `WinWritableFile`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4584
Differential Revision: D10559199
Pulled By: sagar0
fbshipit-source-id: 0d0f18a486aee727d5b8eebd3110a41988e27391
Summary:
Option to print malloc stats to stdout at the end of db_bench. This is different from `--dump_malloc_stats`, which periodically print the same information to LOG file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4582
Differential Revision: D10520814
Pulled By: yiwu-arbug
fbshipit-source-id: beff5e514e414079d31092b630813f82939ffe5c
Summary:
This fixes three tests that fail with relatively recent tools and libraries:
The tests are:
* `spatial_db_test`
* `table_test`
* `db_universal_compaction_test`
I'm using:
* `gcc` 7.3.0
* `glibc` 2.27
* `snappy` 1.1.7
* `gflags` 2.2.1
* `zlib` 1.2.11
* `bzip2` 1.0.6.0.1
* `lz4` 1.8.2
* `jemalloc` 5.0.1
The versions used in the Travis environment (which is two Ubuntu LTS versions behind the current one and doesn't use `lz4` or `jemalloc`) don't seem to have a problem. However, to be safe, I verified that these tests pass with and without my changes in a trusty Docker container without `lz4` and `jemalloc`.
However, I do get an unrelated set of other failures when using a trusty Docker container that uses `lz4` and `jemalloc`:
```
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/0, where GetParam() = (1, false) (1189 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1, where GetParam() = (1, true) (1246 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2, where GetParam() = (3, false) (1237 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3, where GetParam() = (3, true) (1195 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4, where GetParam() = (5, false) (1161 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5, where GetParam() = (5, true) (1229 ms)
```
I haven't attempted to fix these since I'm not using trusty and Travis doesn't use `lz4` and `jemalloc`. However, the final commit in this PR does at least fix the compilation errors that occur when using trusty's version of `lz4`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4562
Differential Revision: D10510917
Pulled By: maysamyabandeh
fbshipit-source-id: 59534042015ec339270e5fc2f6ac4d859370d189
Summary:
clang analyzer currently fails with the following warnings:
> db/log_reader.cc:323:9: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:344:11: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:369:11: warning: Undefined or garbage value returned to caller
return r;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4583
Differential Revision: D10523517
Pulled By: miasantreble
fbshipit-source-id: 0cc8b8f27657b202bead148bbe7c4aa84fed095b
Summary:
A fix similar to #4410 but on the write path. On IO error on `SelectBlobFile()` we didn't return error code properly, but simply a nullptr of `BlobFile`. The `AppendBlob()` method didn't have null check for the pointer and caused crash. The fix make sure we properly return error code in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4580
Differential Revision: D10513849
Pulled By: yiwu-arbug
fbshipit-source-id: 80bca920d1d7a3541149de981015ad83e0aa14b5
Summary:
In fbcode when we build with clang7++, although -faligned-new is available in compile phase, we link with an older version of libstdc++.a and it doesn't come with aligned-new support (e.g. `nm libstdc++.a | grep align_val_t` return empty). In this case the previous -faligned-new detection can pass but will end up with link error. Fixing it by only have the detection for non-fbcode build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4576
Differential Revision: D10500008
Pulled By: yiwu-arbug
fbshipit-source-id: b375de4fbb61d2a08e54ab709441aa8e7b4b08cf
Summary:
Couple of very minor improvements (typos in comments, full qualification of class name, reordering members of a struct to make it smaller)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4564
Differential Revision: D10510183
Pulled By: maysamyabandeh
fbshipit-source-id: c7ddf9bfbf2db08cd31896c3fd93789d3fa68c8b
Summary:
There was a bug that the user comparator would receive the internal key instead of the user key. The bug was due to RangeMightExistAfterSortedRun expecting user key but receiving internal key when called in GenerateBottommostFiles. The patch augment an existing unit test to reproduce the bug and fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4575
Differential Revision: D10500434
Pulled By: maysamyabandeh
fbshipit-source-id: 858346d2fd102cce9e20516d77338c112bdfe366
Summary:
Level compaction usually performs poorly when the writes so heavy that the level targets can't be guaranteed. With this improvement, we improve level_compaction_dynamic_level_bytes = true so that in the write heavy cases, the level multiplier can be slightly adjusted based on the size of L0.
We keep the behavior the same if number of L0 files is under 2X compaction trigger and the total size is less than options.max_bytes_for_level_base, so that unless write is so heavy that compaction cannot keep up, the behavior doesn't change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4338
Differential Revision: D9636782
Pulled By: siying
fbshipit-source-id: e27fc17a7c29c84b00064cc17536a01dacef7595
Summary:
When `MockTimeEnv` is used in test to mock time methods, we cannot use `CondVar::TimedWait` because it is using real time, not the mocked time for wait timeout. On Mac the method can return immediately without awaking other waiting threads, if the real time is larger than `wait_until` (which is a mocked time). When that happen, the `wait()` method will fall into an infinite loop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4560
Differential Revision: D10472851
Pulled By: yiwu-arbug
fbshipit-source-id: 898902546ace7db7ac509337dd8677a527209d19
Summary:
On MacOS with clang the compilation of _tools/db_bench_tool.cc_ always fails because the format used in a `fprintf` call has the wrong type. This PR should hopefully fix this issue
```
tools/db_bench_tool.cc:4233:61: error: format specifies type 'unsigned long long' but the argument has type 'size_t' (aka 'unsigned long')
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4533
Differential Revision: D10471657
Pulled By: maysamyabandeh
fbshipit-source-id: f20f5f3756d3571b586c895c845d0d4d1e34a398
Summary:
WriteBatchWithIndex's SeekForPrev() has a bug that we internally place the position just before the seek key rather than after. This makes the iterator to miss the result that is the same as the seek key. Fix it by position the iterator equal or smaller.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4559
Differential Revision: D10468534
Pulled By: siying
fbshipit-source-id: 2fb371ae809c561b60a1c11cef71e1c66fea1f19
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
The new flag allows tombstones to be generated after enough
keys have been written to the database, which makes it easier to ensure
that tombstones cover a lot of keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4538
Differential Revision: D10455685
Pulled By: abhimadan
fbshipit-source-id: f25d5421745a353c830dea12b79784e852056551
Summary:
We have already disabled it on Travis since it has been too flaky. The same problem arises in Appveyor as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4536
Differential Revision: D10452240
Pulled By: maysamyabandeh
fbshipit-source-id: 728f4ecddf780097159dc0a0737d460eb5ce4f09
Summary:
When HAVE_SSE42 is true, it should always add "-msse4.2 -mpclmul" no
matter if FORCE_SSE42 is true or not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4490
Differential Revision: D10384256
Pulled By: yiwu-arbug
fbshipit-source-id: c82bc988f017981a0f84ddc136f36e2366c3ea8a
Summary:
Allow rocks java to explicitly create WriteBufferManager by plumbing it to the native code through JNI.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4492
Differential Revision: D10428506
Pulled By: sagar0
fbshipit-source-id: cd9dd8c2ef745a0303416b44e2080547bdcca1fd
Summary:
When there are no range deletions, flush and compaction perform a binary search
on an effectively empty map every time they call ShouldDelete. This PR lazily
initializes each stripe map entry so that the binary search can be elided in
these cases.
After this PR, the total amount of time spent in compactions is 52.541331s, and the total amount of time spent in flush is 5.532608s, the former of which is a significant improvement from the results after #4495.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4497
Differential Revision: D10428610
Pulled By: abhimadan
fbshipit-source-id: 6f7e1ce3698fac3ef86d1197955e6b72e0931a0f
Summary:
Current implementation of perf context is level agnostic. Making it hard to do performance evaluation for the LSM tree. This PR adds `PerfContextByLevel` to decompose the counters by level.
This will be helpful when analyzing point and range query performance as well as tuning bloom filter
Also replaced __thread with thread_local keyword for perf_context
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4226
Differential Revision: D10369509
Pulled By: miasantreble
fbshipit-source-id: f1ced4e0de5fcebdb7f9cff36164516bc6382d82
Summary:
When a CompactRange() call for a level is truncated before the end key
is reached, because it exceeds max_compaction_bytes, we need to properly
set the compaction_end parameter to indicate the stop key. The next
CompactRange will use that as the begin key. We set it to the smallest
key of the next file in the level after expanding inputs to get a clean
cut.
Previously, we were setting it before expanding inputs. So we could end
up recompacting some files. In a pathological case, where a single key
has many entries spanning all the files in the level (possibly due to
merge operands without a partial merge operator, thus resulting in
compaction output identical to the input), this would result in
an endless loop over the same set of files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4496
Differential Revision: D10395026
Pulled By: anand1976
fbshipit-source-id: f0c2f89fee29b4b3be53b6467b53abba8e9146a9
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.
This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262
Differential Revision: D9283109
Pulled By: riversand963
fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
Summary:
`CompactionIterator::snapshots_` is ordered by ascending seqnum, just like `DBImpl`'s linked list of snapshots from which it was copied. This PR exploits this ordering to make `findEarliestVisibleSnapshot` do binary search rather than linear scan. This can make flush/compaction significantly faster when many snapshots exist since that function is called on every single key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4495
Differential Revision: D10386470
Pulled By: ajkr
fbshipit-source-id: 29734991631227b6b7b677e156ac567690118a8b
Summary:
WritePrepared is declared production ready (overdue update) and the benchmark results are also reported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4494
Differential Revision: D10385336
Pulled By: maysamyabandeh
fbshipit-source-id: 662672ddfa286aa46af544f505b4d4b7a882d408
Summary:
Using const string& can avoid one extra string copy. This PR addresses a recent comment made by siying on #3933.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4491
Differential Revision: D10381211
Pulled By: riversand963
fbshipit-source-id: 27fc2d65d84bc7cd07833c77cdc47f06dcfaeb31
Summary:
Set the macro if default allocator is jemalloc. It doesn't handle the case when allocator is specified, e.g.
```
cpp_binary(
name="xxx"
allocator="jemalloc", # or "malloc" or something else
deps=["//rocksdb:rocksdb"],
)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4489
Differential Revision: D10363683
Pulled By: yiwu-arbug
fbshipit-source-id: 5da490336a8e78e0feb0900c29e8036e7ec6f12b
Summary:
We would like to collect file-system-level statistics including file name, offset, length, return code, latency, etc., which requires to add callbacks to intercept file IO function calls when RocksDB is running.
To collect file-system-level statistics, users can inherit the class `EventListener`, as in `TestFileOperationListener `. Note that `TestFileOperationListener::ShouldBeNotifiedOnFileIO()` returns true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3933
Differential Revision: D10219571
Pulled By: riversand963
fbshipit-source-id: 7acc577a2d31097766a27adb6f78eaf8b1e8ff15
Summary:
The "je_" prefix of jemalloc APIs presents only when the macro `JEMALLOC_NO_RENAME` from jemalloc.h presents.
With the patch I'm also adding -DROCKSDB_JEMALLOC flag in buck TARGETS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4488
Differential Revision: D10355971
Pulled By: yiwu-arbug
fbshipit-source-id: 03a2d69790a44ac89219c7525763fa937a63d95a
Summary:
This commit adds code to acquire lock on the DB LOCK file
before starting the repair process. This will prevent
multiple processes from performing repair on the same DB
simultaneously. Fixes repair_test to work with this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4435
Differential Revision: D10361499
Pulled By: riversand963
fbshipit-source-id: 3c512c48b7193d383b2279ccecabdb660ac1cf22
Summary:
The default behaviour of rocksdb is to use the `*A(` windows API functions.
These accept filenames in the currently configured system encoding,
be it Latin 1, utf8 or whatever.
If the Application intends to completely work with utf8 strings internally,
converting these to that codepage properly isn't even always possible.
Thus this patch adds a switch to use the `*W(` functions, which accept
UTF-16 filenames, and uses C++11 features to translate the
UTF8 containing std::string to an UTF16 containing std::wstring.
This feature is a compile time options, that can be enabled by setting `WITH_WINDOWS_UTF8_FILENAMES` to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4469
Differential Revision: D10356011
Pulled By: yiwu-arbug
fbshipit-source-id: 27b6ae9171f209085894cdf80069e8a896642044
Summary:
Using `./range_del_aggregator_bench --use_collapsed=false
--num_range_tombstones=5000 --num_runs=1000`, here are the results before and
after this change:
Before:
```
=========================
Results:
=========================
AddTombstones: 1822.61 us
ShouldDelete (first): 94.5286 us
```
After:
```
=========================
Results:
=========================
AddTombstones: 199.26 us
ShouldDelete (first): 38.9344 us
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4487
Differential Revision: D10347288
Pulled By: abhimadan
fbshipit-source-id: d44efe3a166d583acfdc3ec1199e0892f34dbfb7
Summary:
Closes https://github.com/facebook/rocksdb/issues/4462
I'm not sure if you'll be happy with `std::random_device{}`, perhaps you would want to use your rand instance instead. I didn't test to see if your rand instance supports the requirements that `std::shuffle` takes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4482
Differential Revision: D10325133
Pulled By: yiwu-arbug
fbshipit-source-id: 47b7adaf4bb2b8d64cf090ea6b1b48ef53180581
Summary:
Wrong I overwrite `WriteBatch::Handler::Continue` to return _false_ at some point, I always get the `Status::Corruption` error.
I don't think this check is used correctly here: The counter in `found` cannot reflect all entries in the WriteBatch when we exit the loop early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4478
Differential Revision: D10317416
Pulled By: yiwu-arbug
fbshipit-source-id: cccae3382805035f9b3239b66682b5fcbba6bb61
Summary:
Even during `DBIter::Prev()`, there is a case where we need to use `RangeDelPositioningMode::kForwardTraversal`. In particular, when we hit too many internal keys for a single user key, we use seek to find the newest internal key. If it's a merge operand, we then scan forwards, collecting the merge operands. This forward scan should be using `RangeDelPositioningMode::kForwardTraversal`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4481
Differential Revision: D10319507
Pulled By: ajkr
fbshipit-source-id: b5ce7352461f3a7696b28a5136ae0076f2bde51f
Summary:
fix#4288
Add `OnCompactionBegin` support to `rocksdb::EventListener`.
Currently, we only have these three callbacks:
- OnFlushBegin
- OnFlushCompleted
- OnCompactionCompleted
As paolococchi requested in #4288 , and ajkr agreed, we should also support `OnCompactionBegin`.
This PR is a try to implement the support of `OnCompactionBegin`.
Hope it is useful to you.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4431
Differential Revision: D10055515
Pulled By: yiwu-arbug
fbshipit-source-id: 39c0f95f8e9ff1c7ca3a10787502a17f258d2334
Yanqin Jin