Summary:
## Problem Summary
RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance.
## Problem Solution:
I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516
Test Plan:
1. make check
2. CI
3. COMPILE_WITH_TSAN=1 make db_stress
make crash_test
make crash_test_with_multiops_wp_txn
make crash_test_with_multiops_wc_txn
make crash_test_with_atomic_flush
Reviewed By: siying
Differential Revision: D36908702
Pulled By: riversand963
fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
Add `kRoundRobin` as a compaction priority. The implementation is as follows.
- Define a cursor as the smallest Internal key in the successor of the selected file. Add `vector<InternalKey> compact_cursor_` into `VersionStorageInfo` where each element (`InternalKey`) in `compact_cursor_` represents a cursor. In round-robin compaction policy, we just need to select the first file (assuming files are sorted) and also has the smallest InternalKey larger than/equal to the cursor. After a file is chosen, we create a new `Fsize` vector which puts the selected file is placed at the first position in `temp`, the next cursor is then updated as the smallest InternalKey in successor of the selected file (the above logic is implemented in `SortFileByRoundRobin`).
- After a compaction succeeds, typically `InstallCompactionResults()`, we choose the next cursor for the input level and save it to `edit`. When calling `LogAndApply`, we save the next cursor with its level into some local variable and finally apply the change to `vstorage` in `SaveTo` function.
- Cursors are persist pair by pair (<level, InternalKey>) in `EncodeTo` so that they can be reconstructed when reopening. An empty cursor will not be encoded to MANIFEST
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10107
Test Plan: add unit test (`CompactionPriRoundRobin`) in `compaction_picker_test`, add `kRoundRobin` priority in `CompactionPriTest` from `db_compaction_test`, and add `PersistRoundRobinCompactCursor` in `db_compaction_test`
Reviewed By: ajkr
Differential Revision: D37316037
Pulled By: littlepig2013
fbshipit-source-id: 9f481748190ace416079139044e00df2968fb1ee
Summary:
`FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced.
The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`.
An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB.
```
Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185
Test Plan:
- repro unit test
- the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list"
Reviewed By: riversand963
Differential Revision: D37200993
Pulled By: ajkr
fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f
Summary:
This PR helps handle the race condition mentioned in this comment thread: https://github.com/facebook/rocksdb/pull/7884#discussion_r572402281 In case where actual full_history_ts_low is higher than the user's requested ts, return a try again message so they don't have the misconception that data between [ts, full_history_ts_low) is kept.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10126
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=UpdateFullHistoryTsLowTest.ConcurrentUpdate
$ make -j24 check
```
Reviewed By: riversand963
Differential Revision: D37055368
Pulled By: jowlyzhang
fbshipit-source-id: 787fd0984a246540fa03ac227b1d232590d27828
Summary:
As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`.
Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070
Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test).
Reviewed By: ajkr
Differential Revision: D36949133
Pulled By: littlepig2013
fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821
Summary:
info logging with DB Mutex could potentially invoke I/O and cause performance issues. Move three of the cases to use log buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10029
Test Plan: Run existing tests.
Reviewed By: jay-zhuang
Differential Revision: D36561694
fbshipit-source-id: cabb93fea299001a6b4c2802fcba3fde27fa062c
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
**This PR does not affect the functionality of `DB` and write-committed transactions.**
`CompactionIterator` uses `KeyCommitted(seq)` to determine if a key in the database is committed.
As the name 'write-committed' implies, if write-committed policy is used, a key exists in the database only if
it is committed. In fact, the implementation of `KeyCommitted()` is as follows:
```
inline bool KeyCommitted(SequenceNumber seq) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(seq, kMaxSequence) == SnapshotCheckerResult::kInSnapshot;
}
```
With that being said, we focus on write-prepared/write-unprepared transactions.
A few notes:
- A key can exist in the db even if it's uncommitted. Therefore, we rely on `snapshot_checker_` to determine data visibility. We also require that all writes go through transaction API instead of the raw `WriteBatch` + `Write`, thus at most one uncommitted version of one user key can exist in the database.
- `CompactionIterator` outputs a key as long as the key is uncommitted.
Due to the above reasons, it is possible that `CompactionIterator` decides to output an uncommitted key without
doing further checks on the key (`NextFromInput()`). By the time the key is being prepared for output, the key becomes
committed because the `snapshot_checker_(seq, kMaxSequence)` becomes true in the implementation of `KeyCommitted()`.
Then `CompactionIterator` will try to zero its sequence number and hit assertion error if the key is a tombstone.
To fix this issue, we should make the `CompactionIterator` see a consistent view of the input keys. Note that
for write-prepared/write-unprepared, the background flush/compaction jobs already take a "job snapshot" before starting
processing keys. The job snapshot is released only after the entire flush/compaction finishes. We can use this snapshot
to determine whether a key is committed or not with minor change to `KeyCommitted()`.
```
inline bool KeyCommitted(SequenceNumber sequence) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(sequence, job_snapshot_) ==
SnapshotCheckerResult::kInSnapshot;
}
```
As a result, whether a key is committed or not will remain a constant throughout compaction, causing no trouble
for `CompactionIterator`s assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9830
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35561162
Pulled By: riversand963
fbshipit-source-id: 0e00d200c195240341cfe6d34cbc86798b315b9f
Summary:
Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0.
This PR removes dead code related to these two removed options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D35517950
Pulled By: riversand963
fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482
Summary:
Although ColumnFamilySet comments say that DB mutex can be
freed during iteration, as long as you hold a ref while releasing DB
mutex, this is not quite true because UnrefAndTryDelete might delete cfd
right before it is needed to get ->next_ for the next iteration of the
loop.
This change solves the problem by making a wrapper class that makes such
iteration easier while handling the tricky details of UnrefAndTryDelete
on the previous cfd only after getting next_ in operator++.
FreeDeadColumnFamilies should already have been obsolete; this removes
it for good. Similarly, ColumnFamilySet::iterator doesn't need to check
for cfd with 0 refs, because those are immediately deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730
Test Plan:
was reported with ASAN on unit tests like
DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching
Reviewed By: ltamasi
Differential Revision: D35038143
Pulled By: pdillinger
fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679
Test Plan: Add new unit tests in error_handler_fs_test
Reviewed By: riversand963
Differential Revision: D34770097
Pulled By: anand1976
fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
Summary:
In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground
manual compaction thread does not have to wait background compaction
thread to finish. Which could be a problem that the user re-enable
manual compaction with `EnableManualCompaction()`, it may re-enable the
BG compaction which supposed be cancelled.
This patch makes the FG compaction wait on
`manual_compaction_state.done`, which either be set by BG compaction or
Unschedule callback. Then when FG manual compaction thread returns, it
should not have BG compaction running. So shared_ptr is no longer needed
for `manual_compaction_state`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694
Test Plan: a StressTest and unittest
Reviewed By: ajkr
Differential Revision: D34885472
Pulled By: jay-zhuang
fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274
Summary:
https://github.com/facebook/rocksdb/issues/9625 didn't change the unschedule condition which was waiting for the background thread to clean-up the compaction.
make sure we only unschedule the task when it's scheduled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9659
Reviewed By: ajkr
Differential Revision: D34651820
Pulled By: jay-zhuang
fbshipit-source-id: 23f42081b15ec8886cd81cbf131b116e0c74dc2f
Summary:
Timer crash when multiple DB instances doing heavy DB open and close
operations concurrently. Which is caused by adding a timer task with
smaller timestamp than the current running task. Fix it by moving the
getting new task timestamp part within timer mutex protection.
And other fixes:
- Disallow adding duplicated function name to timer
- Fix a minor memory leak in timer when a running task is cancelled
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9656
Reviewed By: ajkr
Differential Revision: D34626296
Pulled By: jay-zhuang
fbshipit-source-id: 6b6d96a5149746bf503546244912a9e41a0c5f6b
Summary:
As disscussed in (https://github.com/facebook/rocksdb/issues/9223), Here added a new API named DB::OpenAndTrimHistory, this API will open DB and trim data to the timestamp specofied by **trim_ts** (The data with newer timestamp than specified trim bound will be removed). This API should only be used at a timestamp-enabled db instance recovery.
And this PR implemented a new iterator named HistoryTrimmingIterator to support trimming history with a new API named DB::OpenAndTrimHistory. HistoryTrimmingIterator wrapped around the underlying InternalITerator such that keys whose timestamps newer than **trim_ts** should not be returned to the compaction iterator while **trim_ts** is not null.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9410
Reviewed By: ltamasi
Differential Revision: D34410207
Pulled By: riversand963
fbshipit-source-id: e54049dc234eccd673244c566b15df58df5a6236
Summary:
This bug affects use cases that meet the following conditions
- (has only the default column family or disables WAL) and
- has at least one event listener
- atomic flush is NOT affected.
If the above conditions meet, then RocksDB can release the db mutex before picking all the
existing memtables to flush. In the meantime, a snapshot can be created and db's sequence
number can still be incremented. The upcoming flush will ignore this snapshot.
A later read using this snapshot can return incorrect result.
To fix this issue, we call the listeners callbacks after picking the memtables so that we avoid
creating snapshots during this interval.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9648
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D34555456
Pulled By: riversand963
fbshipit-source-id: 1438981e9f069a5916686b1a0ad7627f734cf0ee
Summary:
PR https://github.com/facebook/rocksdb/issues/9557 introduced a race condition between manual compaction
foreground thread and background compaction thread.
This PR adds the ability to really unschedule manual compaction from
thread-pool queue by differentiate tag name for manual compaction and
other tasks.
Also fix an issue that db `close()` didn't cancel the manual compaction thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9625
Test Plan: unittest not hang
Reviewed By: ajkr
Differential Revision: D34410811
Pulled By: jay-zhuang
fbshipit-source-id: cb14065eabb8cf1345fa042b5652d4f788c0c40c
Summary:
Fix `DisableManualCompaction()` has to wait scheduled manual compaction to start the execution to cancel the job.
When a manual compaction in thread-pool queue is cancel, set the job is_canceled to true and clean the resource.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9557
Test Plan: added unittest that will hang without the change
Reviewed By: ajkr
Differential Revision: D34214910
Pulled By: jay-zhuang
fbshipit-source-id: 89dbaee78ddf26eb13ce862c2b15f4a098b36a78
Summary:
**Context:**
`EventListenerTest.MultiCF` occasionally failed on TSAN data race as below:
```
WARNING: ThreadSanitizer: data race (pid=2047633)
Read of size 8 at 0x7b6000001440 by main thread:
#0 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::size() const /usr/bin/../lib/gcc/x86_64-linux-gnu/9/../../../../include/c++/9/bits/stl_vector.h:916:40 (listener_test+0x52337c)
https://github.com/facebook/rocksdb/issues/1 rocksdb::EventListenerTest_MultiCF_Test::TestBody() /home/circleci/project/db/listener_test.cc:384:7 (listener_test+0x52337c)
Previous write of size 8 at 0x7b6000001440 by thread T2:
#0 void std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::_M_realloc_insert<rocksdb::DB* const&>(__gnu_cxx::__normal_iterator<rocksdb::DB**, std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> > >, rocksdb::DB* const&) /usr/bin/../lib/gcc/x86_64-linux-gnu/9/../../../../include/c++/9/bits/vector.tcc:503:31 (listener_test+0x550654)
https://github.com/facebook/rocksdb/issues/1 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::push_back(rocksdb::DB* const&) /usr/bin/../lib/gcc/x86_64-linux-gnu/9/../../../../include/c++/9/bits/stl_vector.h:1195:4 (listener_test+0x550654)
https://github.com/facebook/rocksdb/issues/2 rocksdb::TestFlushListener::OnFlushCompleted(rocksdb::DB*, rocksdb::FlushJobInfo const&) /home/circleci/project/db/listener_test.cc:255:18 (listener_test+0x550654)
```
After investigation, it is due to the following:
(1) `ASSERT_OK(Flush(i));` before the read `std::vector::size()` is supposed to be [blocked on `DB::Impl::bg_cv_` for memtable flush to finish](320d9a8e8a/db/db_impl/db_impl_compaction_flush.cc (L2319)) and get signaled [at the end of background flush ](320d9a8e8a/db/db_impl/db_impl_compaction_flush.cc (L2830)), which happens after the write `std::vector::push_back()` . So the sequence of execution should have been synchronized as `call flush() -> write -> return from flush() -> read` and would not cause any TSAN data race.
- The subsequent `ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable());` serves a similar purpose based on [the previous attempt to deflake the test.](https://github.com/facebook/rocksdb/pull/9084)
(2) However, there are multiple places in the code can signal this `DB::Impl::bg_cv_` and mistakenly wake up `ASSERT_OK(Flush(i));` (or `ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable());`) too early (and with the lock available to them), resulting in non-synchronized read and write thus a TSAN data race.
- Reproduced by the following, suggested by ajkr:
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 4ff87c1e4..52492e9cf 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -22,7 +22,7 @@
#include "test_util/sync_point.h"
#include "util/cast_util.h"
#include "util/concurrent_task_limiter_impl.h"
namespace ROCKSDB_NAMESPACE {
bool DBImpl::EnoughRoomForCompaction(
@@ -855,6 +855,7 @@ void DBImpl::NotifyOnFlushCompleted(
mutable_cf_options.level0_stop_writes_trigger);
// release lock while notifying events
mutex_.Unlock();
+ bg_cv_.SignalAll();
```
**Summary:**
- Added synchornization between read and write by ` ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency()` mechanism
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9528
Test Plan:
`./listener_test --gtest_filter=EventListenerTest.MultiCF --gtest_repeat=10`
- pre-fix:
```
Repeating all tests (iteration 3)
Note: Google Test filter = EventListenerTest.MultiCF
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from EventListenerTest
[ RUN ] EventListenerTest.MultiCF
==================
WARNING: ThreadSanitizer: data race (pid=3377137)
Read of size 8 at 0x7b6000000840 by main thread:
#0 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::size()
https://github.com/facebook/rocksdb/issues/1 rocksdb::EventListenerTest_MultiCF_Test::TestBody() db/listener_test.cc:384 (listener_test+0x4bb300)
Previous write of size 8 at 0x7b6000000840 by thread T2:
#0 void std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::_M_realloc_insert<rocksdb::DB* const&>(__gnu_cxx::__normal_iterator<rocksdb::DB**, std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> > >, rocksdb::DB* const&)
https://github.com/facebook/rocksdb/issues/1 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::push_back(rocksdb::DB* const&)
https://github.com/facebook/rocksdb/issues/2 rocksdb::TestFlushListener::OnFlushCompleted(rocksdb::DB*, rocksdb::FlushJobInfo const&) db/listener_test.cc:255 (listener_test+0x4e820f)
```
- post-fix: `All passed`
Reviewed By: ajkr
Differential Revision: D34085791
Pulled By: hx235
fbshipit-source-id: f877aa687ea1d5cb6f31ef8c4772625d22868e8b
Summary:
The patch replaces `std::map` with a sorted `std::vector` for
`VersionStorageInfo::blob_files_` and preallocates the space
for the `vector` before saving the `BlobFileMetaData` into the
new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`.
These changes reduce the time the DB mutex is held while
saving new `Version`s, and using a sorted `vector` also makes
lookups faster thanks to better memory locality.
In addition, the patch introduces helper methods
`VersionStorageInfo::GetBlobFileMetaData` and
`VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by
clients to perform lookups in the `vector`, and does some general
cleanup in the parts of code where blob file metadata are used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526
Test Plan:
Ran `make check` and the crash test script for a while.
Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced:
```
numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value>
```
Final statistics before the patch:
```
Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s
Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s
```
With the patch:
```
Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s
Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s
```
Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs.
Reviewed By: riversand963
Differential Revision: D34082728
Pulled By: ltamasi
fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
Summary:
* Add more micro-benchmark tests
* Expose an API in DBImpl for waiting for compactions (still not visible to the user)
* Add argument name for ribbon_bench
* remove benchmark run from CI, as it runs too long.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9436
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D33777836
Pulled By: jay-zhuang
fbshipit-source-id: c05de3bc082cc05b5d019f00b324e774bf4bbd96
Summary:
Fix https://github.com/facebook/rocksdb/issues/8046 : FlushMemTable return ok but memtable does not synchronize flush. The way to fix it is to expose RecoveryError.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8173
Reviewed By: ajkr
Differential Revision: D31674552
Pulled By: jay-zhuang
fbshipit-source-id: 9d16b69ba12a196bb429332ec8224754de97773d
Summary:
As (https://github.com/facebook/rocksdb/issues/9210) discussed, the **full_history_ts_low** is a member of CompactRangeOptions currently, which means a CF's fullHistoryTsLow is advanced only when users submit a CompactRange request.
However, users may want to advance the fllHistoryTsLow without an immediate compact.
This merge make IncreaseFullHistoryTsLow to a public API so users can advance each CF's fullHistoryTsLow seperately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9221
Reviewed By: akankshamahajan15
Differential Revision: D33201106
Pulled By: riversand963
fbshipit-source-id: 9cb1d013ba93260f72e16353e693ffee167b47ee
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
After RocksDB 6.19 and before this PR, RocksDB FlushJob may pick more memtables to flush beyond synced WALs.
This can be problematic if there are multiple column families, since it can prematurely advance the flushed column
family's log_number. Should subsequent attempts fail to sync the latest WALs and the database goes
through a recovery, it may detect corrupted WAL number below the flushed column family's log number
and complain about column family inconsistency.
To fix, we record the maximum memtable ID of the column family being flushed. Then we call SyncClosedLogs()
so that all closed WALs at the time when memtable ID is recorded will be synced.
I also disabled a unit test temporarily due to reasons described in https://github.com/facebook/rocksdb/issues/9151
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9142
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D32299956
Pulled By: riversand963
fbshipit-source-id: 0da75888177d91905cf8c9d00605b73afb5970a7
Summary:
- Fixed bug where bottom-pri manual compactions were counting towards `bg_compaction_scheduled_` instead of `bg_bottom_compaction_scheduled_`. It seems to have no negative effect.
- Fixed bug where automatic compaction scheduling did not consider `bg_bottom_compaction_scheduled_`. Now automatic compactions cannot be scheduled that exceed the per-DB compaction concurrency limit (`max_compactions`) when some existing compactions are bottommost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9179
Test Plan: new unit test for manual/automatic. Also verified the existing automatic/automatic test ("ConcurrentBottomPriLowPriCompactions") hanged until changing it to explicitly enable concurrency.
Reviewed By: riversand963
Differential Revision: D32488048
Pulled By: ajkr
fbshipit-source-id: 20c4c0693678e81e43f85ed3cc3402fcf26e3310
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
currently histogram `NUM_FILES_IN_SINGLE_COMPACTION` just counted files in first level of compaction input, this fix counts files in all levels of compaction input.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9026
Reviewed By: ajkr
Differential Revision: D31668241
Pulled By: jay-zhuang
fbshipit-source-id: c02f6c4a5df9fbf0b7510036594811152e8738af
Summary:
The bug can impact the following scenario. There must be two `CompactRange()`s, call them A and B. Compaction A must have `change_level=true`. Compactions A and B must run in parallel, and new data must be added while they run as well.
Now, on to the details of the race condition. Compaction A must reach the refitting phase while B's next step is to trivial move new data (i.e., data that has been inserted behind A) down to the same level that A's refit targets (`CompactRangeOptions::target_level`). B must be unregistered (i.e., has not yet called `AddManualCompaction()` for the current `RunManualCompaction()`) while A invokes `DisableManualCompaction()`s to prepare for refitting. In the old code, B could still proceed to register a manual compaction, while A had disabled manual compaction.
The next part of the race condition is B picks and schedules a trivial move while A has released the lock in refitting phase in order to persist the LSM state change (i.e., the log phase of `LogAndApply()`). That way, B does not see the refitted data when picking a trivial-move compaction. So it is susceptible to picking one that overlaps.
Finally, B executes the picked trivial-move compaction. Trivial-move compactions are special in that they never check whether manual compaction is disabled. So the picked compaction causing overlap ends up being applied, leading to LSM corruption if `force_consistency_checks=false`, or entering read-only mode with `Status::Corruption` if `force_consistency_checks=true` (the default).
The fix is just to prevent B from registering itself in `RunManualCompaction()` while manual compactions are disabled, consequently preventing any trivial move or other compaction from being picked/scheduled.
Thanks to siying for finding the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9077
Test Plan: The test does not go all the way in exposing the bug because it requires a compaction to be picked/scheduled while logging LSM state change for RefitLevel(). But the fix is to make such a compaction not picked/scheduled in the first place, so any repro of that scenario would end up hanging RefitLevel() logging. So instead I just verified no such compaction is registered in the scenario where `RefitLevel()` disables manual compactions.
Reviewed By: siying
Differential Revision: D31921908
Pulled By: ajkr
fbshipit-source-id: 9bb5d0e847ad428211227f40830c685c209fbecb
Summary:
In atomic flush, concurrent background flush threads will commit to the MANIFEST
one by one, in the order of the IDs of their picked memtables for all included column
families. Each time, a background flush thread decides whether to wait based on two
criteria:
- Is db stopped? If so, don't wait.
- Am I the one to commit the currently earliest memtable? If so, don't wait and ready to go.
When atomic flush was implemented, error writing to or syncing the MANIFEST would
cause the db to be stopped. Therefore, this background thread does not have to check
for the background error while waiting. If there has been such an error, `DBStopped()`
would have been true, and this thread will **not** wait forever.
After we improved error handling, RocksDB may map an IOError while writing to MANIFEST
to a soft error, if there is no WAL. This requires the background threads to check for
background error while waiting. Otherwise, a background flush thread may wait forever.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9034
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D31639225
Pulled By: riversand963
fbshipit-source-id: e9ab07c4d8f2eade238adeefe3e42dd9a5a3ebbd
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8991
Test Plan: the new test hangs forever without this fix and passes with this fix.
Reviewed By: hx235
Differential Revision: D31456419
Pulled By: ajkr
fbshipit-source-id: a82c0e5560b6e6153089dccd8e46163c61b07bff
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
1. Extend FlushJobInfo and CompactionJobInfo with information about the blob files generated by flush/compaction jobs. This PR add two structures BlobFileInfo and BlobFileGarbageInfo that contains the required information of blob files.
2. Notify the creation and deletion of blob files through OnBlobFileCreationStarted, OnBlobFileCreated, and OnBlobFileDeleted.
3. Test OnFile*Finish operations notifications with Blob Files.
4. Log the blob file creation/deletion events through EventLogger in Log file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8675
Test Plan: Add new unit tests in listener_test
Reviewed By: ltamasi
Differential Revision: D30412613
Pulled By: akankshamahajan15
fbshipit-source-id: ca51b63c6e8c8d0485a38c503572bc5a82bd5d07
Summary:
Pass BlobFileCompletionCallback in case of atomic flush and
compaction job which is currently nullptr(default parameter).
BlobFileCompletionCallback is used in case of IntegratedBlobDB to report new blob files to
SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8681
Test Plan: CircleCI jobs
Reviewed By: ltamasi
Differential Revision: D30445998
Pulled By: akankshamahajan15
fbshipit-source-id: ba48093843864faec57f1f365cce7b5a569c4021
Summary:
Previously, when a `FlushJob` was redirected to a MemPurge, the function `DBImpl::NotifyOnFlushComplete` was called, which created a series of issues because the JobInfo was not correctly collected from the memtables.
This diff aims at correcting these two issues (`FlushJobInfo` collection in `FlushJob::MemPurge` , no call to `DBImpl::NotifyOnFlushComplete` after successful mempurge).
Event listeners were added to the unit tests to handle these situations.
Surprisingly none of the crashtests caught this issue, I will try to add event listeners to crash tests in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8672
Reviewed By: akankshamahajan15
Differential Revision: D30383109
Pulled By: bjlemaire
fbshipit-source-id: 35a8d4295886923ee4049a6447f00022cb221c73
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
PR https://github.com/facebook/rocksdb/issues/5908 added `flush_jobs_info_` to `FlushJob` to make sure
`OnFlushCompleted()` is called after committing flush results to
MANIFEST. However, `flush_jobs_info_` is not updated in atomic
flush, causing `NotifyOnFlushCompleted()` to skip `OnFlushCompleted()`.
This PR fixes this, in a similar way to https://github.com/facebook/rocksdb/issues/5908 that handles regular flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8585
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D29913720
Pulled By: riversand963
fbshipit-source-id: 4ff023c98372fa2c93188d4a5c8a4e9ffa0f4dda
Summary:
The `ColumnFamilyData::UnrefAndTryDelete` code currently on the trunk
unlocks the DB mutex before destroying the `ThreadLocalPtr` holding
the per-thread `SuperVersion` pointers when the only remaining reference
is the back reference from `super_version_`. The idea behind this was to
break the circular dependency between `ColumnFamilyData` and `SuperVersion`:
when the penultimate reference goes away, `ColumnFamilyData` can clean up
the `SuperVersion`, which can in turn clean up `ColumnFamilyData`. (Assuming there
is a `SuperVersion` and it is not referenced by anything else.) However,
unlocking the mutex throws a wrench in this plan by making it possible for another thread
to jump in and take another reference to the `ColumnFamilyData`, keeping the
object alive in a zombie `ThreadLocalPtr`-less state. This can cause issues like
https://github.com/facebook/rocksdb/issues/8440 ,
https://github.com/facebook/rocksdb/issues/8382 ,
and might also explain the `was_last_ref` assertion failures from the `ColumnFamilySet`
destructor we sometimes observe during close in our stress tests.
Digging through the archives, this unlocking goes way back to 2014 (or earlier). The original
rationale was that `SuperVersionUnrefHandle` used to lock the mutex so it can call
`SuperVersion::Cleanup`; however, this logic turned out to be deadlock-prone.
https://github.com/facebook/rocksdb/pull/3510 fixed the deadlock but left the
unlocking in place. https://github.com/facebook/rocksdb/pull/6147 then introduced
the circular dependency and associated cleanup logic described above (in order
to enable iterators to keep the `ColumnFamilyData` for dropped column families alive),
and moved the unlocking-relocking snippet to its present location in `UnrefAndTryDelete`.
Finally, https://github.com/facebook/rocksdb/pull/7749 fixed a memory leak but
apparently exacerbated the race by (otherwise correctly) switching to `UnrefAndTryDelete`
in `SuperVersion::Cleanup`.
The patch simply eliminates the unlocking and relocking, which has been unnecessary
ever since https://github.com/facebook/rocksdb/issues/3510 made `SuperVersionUnrefHandle` lock-free.
This closes the window during which another thread could increase the reference count,
and hopefully fixes the issues above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8605
Test Plan: Ran `make check` and stress tests locally.
Reviewed By: pdillinger
Differential Revision: D30051035
Pulled By: ltamasi
fbshipit-source-id: 8fe559e4b4ad69fc142579f8bc393ef525918528
Summary:
Rare TSAN and valgrind failures are caused by unnecessary
reading of a field on the TaskLimiterToken::limiter_ for an assertion
after the token has been released and the limiter destroyed. To simplify
we can simply destroy the token before triggering DB shutdown
(potentially destroying the limiter). This makes the ReleaseOnce logic
unnecessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8567
Test Plan: watch for more failures in CI
Reviewed By: ajkr
Differential Revision: D29811795
Pulled By: pdillinger
fbshipit-source-id: 135549ebb98fe4f176d1542ed85d5bd6350a40b3
Summary:
In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables.
The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables.
This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528
Reviewed By: pdillinger
Differential Revision: D29701097
Pulled By: bjlemaire
fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
Wallace