14 Commits (ff1cc8a63e64684bcdfab099e3728da51d7fb2e3)

Author	SHA1	Message	Date
Hui Xiao	151242ce46	Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) ... Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132	2 years ago
Peter Dillinger	204fcff751	HyperClockCache support for SecondaryCache, with refactoring (#11301) ... Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5	2 years ago
Peter Dillinger	9f7801c5f1	Major Cache refactoring, CPU efficiency improvement (#10975) ... Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432	2 years ago
Akanksha Mahajan	2db6a4a1d6	Seek parallelization (#9994) ... Summary: The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index). This flow can be parallelized. Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap. - Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted. - If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass. - If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994 Test Plan: - **Run Regressions.** ``` ./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216 ``` i) Previous release 7.0 run for normal prefetching with async_io disabled: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` ii) normal prefetching after changes with async_io disable: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Set seed to 1652922591315307 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:09:51 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found) ``` iii) db_bench with async_io enabled completed succesfully ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1 Set seed to 1652924062021732 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:34:22 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found) ``` - db_stress with async_io disabled completed succesfully ``` export CRASH_TEST_EXT_ARGS=" --async_io=0" make crash_test -j ``` I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it. Reviewed By: anand1976 Differential Revision: D36459323 Pulled By: akankshamahajan15 fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c	3 years ago
Alan Paxton	b6ad0d958f	Fb 9718 verify checksums is ignored (#9767) ... Summary: Fixes https://github.com/facebook/rocksdb/issues/9718 The verify_checksums flag of read_options should be passed to the read options used by the BlockFetcher in a couple of cases where it is not at present. It will now happen (but did not, previously) on iteration and on [multi]get, where a fetcher is created as part of the iterate/get call. This may result in much better performance in a few workloads where the client chooses to remove verification. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9767 Reviewed By: mrambacher Differential Revision: D35218986 Pulled By: jay-zhuang fbshipit-source-id: 329d29764bb70fbc7f2673440bc46c107a813bc8	3 years ago
mrambacher	13ae16c315	Cleanup includes in dbformat.h (#8930) ... Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d	3 years ago
anand76	8ea0a2c1bd	Parallelize secondary cache lookup in MultiGet (#8405) ... Summary: Implement the ```WaitAll()``` interface in ```LRUCache``` to allow callers to issue multiple lookups in parallel and wait for all of them to complete. Modify ```MultiGet``` to use this to parallelize the secondary cache lookups in order to reduce the overall latency. A call to ```cache->Lookup()``` returns a handle that has an incomplete value (nullptr), and the caller can call ```cache->IsReady()``` to check whether the lookup is complete, and pass a vector of handles to ```WaitAll``` to wait for completion. If any of the lookups fail, ```MultiGet``` will read the block from the SST file. Another change in this PR is to rename ```SecondaryCacheHandle``` to ```SecondaryCacheResultHandle``` as it more accurately describes the return result of the secondary cache lookup, which is more like a future. Tests: 1. Add unit tests in lru_cache_test 2. Benchmark results with no secondary cache configured Master - ``` readrandom : 41.175 micros/op 388562 ops/sec; 106.7 MB/s (7277999 of 7277999 found) readrandom : 41.217 micros/op 388160 ops/sec; 106.6 MB/s (7274999 of 7274999 found) multireadrandom : 10.309 micros/op 1552082 ops/sec; (28908992 of 28908992 found) multireadrandom : 10.321 micros/op 1550218 ops/sec; (29081984 of 29081984 found) ``` This PR - ``` readrandom : 41.158 micros/op 388723 ops/sec; 106.8 MB/s (7290999 of 7290999 found) readrandom : 41.185 micros/op 388463 ops/sec; 106.7 MB/s (7287999 of 7287999 found) multireadrandom : 10.277 micros/op 1556801 ops/sec; (29346944 of 29346944 found) multireadrandom : 10.253 micros/op 1560539 ops/sec; (29274944 of 29274944 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8405 Reviewed By: zhichao-cao Differential Revision: D29190509 Pulled By: anand1976 fbshipit-source-id: 6f8eff6246712af8a297cfe22ea0d1c3b2a01bb0	4 years ago
mrambacher	0ca6d6297f	Rename variables in ImmutableCFOptions to avoid conflicts with ImmutableDBOptions (#8227) ... Summary: Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227 Reviewed By: jay-zhuang Differential Revision: D28000967 Pulled By: mrambacher fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b	4 years ago
Anand Ananthabhotla	9a5886bd8c	Extend Get/MultiGet deadline support to table open (#6982) ... Summary: Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open. The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future. Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982 Test Plan: Add new unit tests in db_basic_test Reviewed By: riversand963 Differential Revision: D22219515 Pulled By: anand1976 fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b	5 years ago
sdong	fdf882ded2	Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433) ... Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e	5 years ago
sdong	e8263dbdaa	Apply formatter to recent 200+ commits. (#5830) ... Summary: Further apply formatter to more recent commits. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830 Test Plan: Run all existing tests. Differential Revision: D17488031 fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab	5 years ago
Levi Tamasi	df8c307d63	Revert to storing UncompressionDicts in the cache (#5645) ... Summary: PR https://github.com/facebook/rocksdb/issues/5584 decoupled the uncompression dictionary object from the underlying block data; however, this defeats the purpose of the digested ZSTD dictionary, since the whole point of the digest is to create it once and reuse it over and over again. This patch goes back to storing the uncompression dictionary itself in the cache (which should be now safe to do, since it no longer includes a Statistics pointer), while preserving the rest of the refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5645 Test Plan: make asan_check Differential Revision: D16551864 Pulled By: ltamasi fbshipit-source-id: 2a7e2d34bb16e70e3c816506d5afe1d842057800	5 years ago
Levi Tamasi	d92a59b6f2	Fix regression affecting partitioned indexes/filters when cache_index_and_filter_blocks is false (#5705) ... Summary: PR https://github.com/facebook/rocksdb/issues/5298 (and subsequent related patches) unintentionally changed the semantics of cache_index_and_filter_blocks: historically, this option only affected the main index/filter block; with the changes, it affects index/filter partitions as well. This can cause performance issues when cache_index_and_filter_blocks is false since in this case, partitions are neither cached nor preloaded (i.e. they are loaded on demand upon each access). The patch reverts to the earlier behavior, that is, partitions are cached similarly to data blocks regardless of the value of the above option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5705 Test Plan: make check ./db_bench -benchmarks=fillrandom --statistics --stats_interval_seconds=1 --duration=30 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false ./db_bench -benchmarks=readrandom --use_existing_db --statistics --stats_interval_seconds=1 --duration=10 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false --cache_size=8000000000 Relevant statistics from the readrandom benchmark with the old code: rocksdb.block.cache.index.miss COUNT : 0 rocksdb.block.cache.index.hit COUNT : 0 rocksdb.block.cache.index.add COUNT : 0 rocksdb.block.cache.index.bytes.insert COUNT : 0 rocksdb.block.cache.index.bytes.evict COUNT : 0 rocksdb.block.cache.filter.miss COUNT : 0 rocksdb.block.cache.filter.hit COUNT : 0 rocksdb.block.cache.filter.add COUNT : 0 rocksdb.block.cache.filter.bytes.insert COUNT : 0 rocksdb.block.cache.filter.bytes.evict COUNT : 0 With the new code: rocksdb.block.cache.index.miss COUNT : 2500 rocksdb.block.cache.index.hit COUNT : 42696 rocksdb.block.cache.index.add COUNT : 2500 rocksdb.block.cache.index.bytes.insert COUNT : 4050048 rocksdb.block.cache.index.bytes.evict COUNT : 0 rocksdb.block.cache.filter.miss COUNT : 2500 rocksdb.block.cache.filter.hit COUNT : 4550493 rocksdb.block.cache.filter.add COUNT : 2500 rocksdb.block.cache.filter.bytes.insert COUNT : 10331040 rocksdb.block.cache.filter.bytes.evict COUNT : 0 Differential Revision: D16817382 Pulled By: ltamasi fbshipit-source-id: 28a516b0da1f041a03313e0b70b28cf5cf205d00	5 years ago
Levi Tamasi	092f417037	Move the uncompression dictionary object out of the block cache (#5584) ... Summary: RocksDB has historically stored uncompression dictionary objects in the block cache as opposed to storing just the block contents. This neccesitated evicting the object upon table close. With the new code, only the raw blocks are stored in the cache, eliminating the need for eviction. In addition, the patch makes the following improvements: 1) Compression dictionary blocks are now prefetched/pinned similarly to index/filter blocks. 2) A copy operation got eliminated when the uncompression dictionary is retrieved. 3) Errors related to retrieving the uncompression dictionary are propagated as opposed to silently ignored. Note: the patch temporarily breaks the compression dictionary evicition stats. They will be fixed in a separate phase. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584 Test Plan: make asan_check Differential Revision: D16344151 Pulled By: ltamasi fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b	6 years ago