Summary:
The functions will be used for remote compaction parameter
input and result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8247
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D28104680
Pulled By: jay-zhuang
fbshipit-source-id: c0a5178e6277125118384278efea2acbf90aa6cb
Summary:
And change the cmake build on macos with GFLAGS on to cover more cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8289
Reviewed By: zhichao-cao
Differential Revision: D28372467
Pulled By: jay-zhuang
fbshipit-source-id: ad7fbe523c3fb135ef5281adbaf2070ca5d0873d
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
Added ParseType, SerializeType, and TypesAreEqual methods to OptionTypeInfo. These methods can be used for serialization and deserialization of basic types.
Change the MutableCF/DB Options to use this format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8249
Reviewed By: jay-zhuang
Differential Revision: D28351190
Pulled By: mrambacher
fbshipit-source-id: 72a78643b804f2f0bf59c32ffefa63346672ad16
Summary:
This change enables a couple of things:
- Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production"
- The ObjectRegistry is created fewer times and can be re-used
The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166
Reviewed By: zhichao-cao
Differential Revision: D27657952
Pulled By: mrambacher
fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
Summary:
Per previous discussion, change date format in HISTORY.md to follow ISO 8601.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8278
Reviewed By: jay-zhuang
Differential Revision: D28294022
fbshipit-source-id: 563f29c56143519b4a871df82a17dd0a168a578c
Summary:
From HISTORY.md release note:
- Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`.
- Removed unused structure `CompactionFilterContext`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243
Test Plan: added unit tests
Reviewed By: pdillinger
Differential Revision: D28088089
Pulled By: ajkr
fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae
Summary:
Bumps [rexml](https://github.com/ruby/rexml) from 3.2.4 to 3.2.5.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/ruby/rexml/blob/master/NEWS.md">rexml's changelog</a>.</em></p>
<blockquote>
<h2>3.2.5 - 2021-04-05 {#version-3-2-5}</h2>
<h3>Improvements</h3>
<ul>
<li>
<p>Add more validations to XPath parser.</p>
</li>
<li>
<p><code>require "rexml/document"</code> by default.
[GitHub#36][Patch by Koichi ITO]</p>
</li>
<li>
<p>Don't add <code>#dcloe</code> method to core classes globally.
[GitHub#37][Patch by Akira Matsuda]</p>
</li>
<li>
<p>Add more documentations.
[Patch by Burdette Lamar]</p>
</li>
<li>
<p>Added <code>REXML::Elements#parent</code>.
[GitHub#52][Patch by Burdette Lamar]</p>
</li>
</ul>
<h3>Fixes</h3>
<ul>
<li>
<p>Fixed a bug that <code>REXML::DocType#clone</code> doesn't copy external ID
information.</p>
</li>
<li>
<p>Fixed round-trip vulnerability bugs.
See also: <a href="https://www.ruby-lang.org/en/news/2021/04/05/xml-round-trip-vulnerability-in-rexml-cve-2021-28965/">https://www.ruby-lang.org/en/news/2021/04/05/xml-round-trip-vulnerability-in-rexml-cve-2021-28965/</a>
[HackerOne#1104077][CVE-2021-28965][Reported by Juho Nurminen]</p>
</li>
</ul>
<h3>Thanks</h3>
<ul>
<li>
<p>Koichi ITO</p>
</li>
<li>
<p>Akira Matsuda</p>
</li>
<li>
<p>Burdette Lamar</p>
</li>
<li>
<p>Juho Nurminen</p>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="a622645e98"><code>a622645</code></a> Add 3.2.5 entry</li>
<li><a href="3c137eb119"><code>3c137eb</code></a> Fix a parser bug that some data may be ignored before DOCTYPE</li>
<li><a href="9b311e59ae"><code>9b311e5</code></a> Fix a bug that invalid document declaration may be accepted</li>
<li><a href="f9d88e4948"><code>f9d88e4</code></a> Fix a bug that invalid document declaration may be generated</li>
<li><a href="f7bab89375"><code>f7bab89</code></a> Fix a bug that invalid element end may be accepted</li>
<li><a href="6a250d2cd1"><code>6a250d2</code></a> Fix a bug that invalid element start may be accepted</li>
<li><a href="2fe62e2909"><code>2fe62e2</code></a> Fix a bug that invalid notation declaration may be accepted</li>
<li><a href="a659c63e37"><code>a659c63</code></a> Fix a bug that invalid notation declaration may be generated</li>
<li><a href="790dd113ce"><code>790dd11</code></a> Use ruby/setup-ruby (<a href="https://github-redirect.dependabot.com/ruby/rexml/issues/66">https://github.com/facebook/rocksdb/issues/66</a>)</li>
<li><a href="eda1b2007d"><code>eda1b20</code></a> Clean up and enhance high-level RDoc (<a href="https://github-redirect.dependabot.com/ruby/rexml/issues/65">https://github.com/facebook/rocksdb/issues/65</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/ruby/rexml/compare/v3.2.4...v3.2.5">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `dependabot rebase` will rebase this PR
- `dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `dependabot merge` will merge this PR after your CI passes on it
- `dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `dependabot cancel merge` will cancel a previously requested merge and block automerging
- `dependabot reopen` will reopen this PR if it is closed
- `dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
- `dependabot use these labels` will set the current labels as the default for future PRs for this repo and language
- `dependabot use these reviewers` will set the current reviewers as the default for future PRs for this repo and language
- `dependabot use these assignees` will set the current assignees as the default for future PRs for this repo and language
- `dependabot use this milestone` will set the current milestone as the default for future PRs for this repo and language
You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/facebook/rocksdb/network/alerts).
</details>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8251
Reviewed By: jay-zhuang
Differential Revision: D28163644
Pulled By: ajkr
fbshipit-source-id: 7c0e8bf30c70f53db691076b396c0b748fa9380d
Summary:
An early design of BackupEngine used stackable DB, so I guess a
DB had to opt-in to being backupable. Unfortunately the naming of that
obsolete design still infects our public API and implementation.
This change fixes the public API, with a deprecated
backward-compatibility header. `BackupableDBOptions` is renamed to
`BackupEngineOptions` (copy-replace in the public header) and
backup_engine.h replaces backupable_db.h (present for backward
compatibility). The only other change in backupable_db.h ->
backup_engine.h is cleaning up headers.
Later changes will fix the internal implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8274
Test Plan:
The internal implementation of BackupEngine uses the name
BackupEngineOptions, while the unit tests use the old name
BackupableDBOptions. This gives me confidence that both still work.
Reviewed By: mrambacher
Differential Revision: D28259471
Pulled By: pdillinger
fbshipit-source-id: a25dbe327b9772143488e7bb0ec7139ee42d0613
Summary:
Larger arena block size does provide the benefit of reducing allocation overhead, however it may cause other troubles. For example, allocator is more likely not to allocate them to physical memory and trigger page fault. Weighing the risk, we cap the arena block size to 1MB. Users can always use a larger value if they want.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7907
Test Plan: Run all existing tests
Reviewed By: pdillinger
Differential Revision: D26135269
fbshipit-source-id: b7f55afd03e6ee1d8715f90fa11b6c33944e9ea8
Summary:
In https://github.com/facebook/rocksdb/issues/8268, the `db_stress` stdout began containing both the strings
"fail" and "error" (case-insensitive). The whitebox crash test
failed upon seeing either of those strings.
I checked that all other occurrences of "fail" and "error"
(case-insensitive) that `db_stress` produces are printed to `stderr`. So
this PR separates the handling of `db_stress`'s stdout and stderr, and
only fails when one those bad strings are found in stderr.
The downside of this PR is `db_stress`'s original interleaving of stdout/stderr is not preserved in `db_crashtest.py`'s output.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8272
Test Plan:
run it; see it succeeds for several runs until encountering a real error
```
$ python3 tools/db_crashtest.py whitebox --simple --random_kill_odd=8887 --max_key=1000000 --value_size_mult=33
...
db_stress: cache/clock_cache.cc:483: bool rocksdb::{anonymous}::ClockCacheShard::Unref(rocksdb::{anonymous}::CacheHandle*, bool, rocksdb::{anonymous}::CleanupContext*): Assertion `CountRefs(flags) > 0' failed.
TEST FAILED. Output has 'fail'!!!
```
Reviewed By: zhichao-cao
Differential Revision: D28239233
Pulled By: ajkr
fbshipit-source-id: 3b8602a0d570466a7e2c81bb9c49468f7716091e
Summary:
When injecting in DB open, error can happen in background threads, causing DB open succeed, but DB is soon made read-only and subsequence writes will fail, which is not expected. To prevent it from happening, wait for compaction to finish before serving the traffic. If there is a failure, reopen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8270
Test Plan: Run the test.
Reviewed By: ajkr
Differential Revision: D28230537
fbshipit-source-id: e2e97888904f9b9bb50c35ccf95b88c2319ef5c3
Summary:
Refactor kill point to one single class, rather than several extern variables. The intention was to drop unflushed data before killing to simulate some job, and I tried to a pointer to fault ingestion fs to the killing class, but it ended up with harder than I thought. Perhaps we'll need to do this in another way. But I thought the refactoring itself is good so I send it out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8241
Test Plan: make release and run crash test for a while.
Reviewed By: anand1976
Differential Revision: D28078486
fbshipit-source-id: f9182c1455f52e6851c13f88a21bade63bcec45f
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
Previously the shutdown process did not properly wait for all
`compaction_thread_limiter` tokens to be released before proceeding to
delete the DB's C++ objects. When this happened, we saw tests like
"DBCompactionTest.CompactionLimiter" flake with the following error:
```
virtual
rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl():
Assertion `outstanding_tasks_ == 0' failed.
```
There is a case where a token can still be alive even after the shutdown
process has waited for BG work to complete. In particular, this happens
because the shutdown process only waits for flush/compaction scheduled/unscheduled counters to all
reach zero. These counters are decremented in `BackgroundCallCompaction()`
functions. However, tokens are released in `BGWork*Compaction()` functions, which
actually wrap the `BackgroundCallCompaction()` function.
A simple sleep could repro the race condition:
```
$ diff --git a/db/db_impl/db_impl_compaction_flush.cc
b/db/db_impl/db_impl_compaction_flush.cc
index 806bc548a..ba59efa89 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2442,6 +2442,7 @@ void DBImpl::BGWorkCompaction(void* arg) {
static_cast<PrepickedCompaction*>(ca.prepicked_compaction);
static_cast_with_check<DBImpl>(ca.db)->BackgroundCallCompaction(
prepicked_compaction, Env::Priority::LOW);
+ sleep(1);
delete prepicked_compaction;
}
$ ./db_compaction_test --gtest_filter=DBCompactionTest.CompactionLimiter
db_compaction_test: util/concurrent_task_limiter_impl.cc:24: virtual rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl(): Assertion `outstanding_tasks_ == 0' failed.
Received signal 6 (Aborted)
#0 /usr/local/fbcode/platform007/lib/libc.so.6(gsignal+0xcf) [0x7f02673c30ff] ?? ??:0
https://github.com/facebook/rocksdb/issues/1 /usr/local/fbcode/platform007/lib/libc.so.6(abort+0x134) [0x7f02673ac934] ?? ??:0
...
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8253
Test Plan: sleeps to expose race conditions
Reviewed By: akankshamahajan15
Differential Revision: D28168064
Pulled By: ajkr
fbshipit-source-id: 9e5167c74398d323e7975980c5cc00f450631160
Summary:
Previously we saw flakes on platforms like arm on CircleCI, such as the following:
```
Note: Google Test filter = DBTest.L0L1L2AndUpHitCounter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBTest
[ RUN ] DBTest.L0L1L2AndUpHitCounter
db/db_test.cc:5345: Failure
Expected: (TestGetTickerCount(options, GET_HIT_L0)) > (100), actual: 30 vs 100
[ FAILED ] DBTest.L0L1L2AndUpHitCounter (150 ms)
[----------] 1 test from DBTest (150 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (150 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBTest.L0L1L2AndUpHitCounter
```
The test was totally non-deterministic, e.g., flush/compaction timing would affect how many files on each level. Furthermore, it depended heavily on platform-specific details, e.g., by having a 32KB memtable, it could become full with a very different number of entries depending on the platform.
This PR rewrites the test to build a deterministic LSM with one file per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8259
Reviewed By: mrambacher
Differential Revision: D28178100
Pulled By: ajkr
fbshipit-source-id: 0a03b26e8d23c29d8297c1bccb1b115dce33bdcd
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
BlockPrefetcher is used by iterators to prefetch data if they
anticipate more data to be used in future and this is valid for forward sequential
scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads
are sequential. This presents problem for MultiGet with large number of
keys when it reseeks index iterator and data block. FilePrefetchBuffer
can end up doing large readahead for reseeks as readahead size
increases exponentially once readahead is enabled. Same issue is with
BlockBasedTableIterator.
Add previous length and offset read as well in BlockPrefetcher (creates
FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to
determine if reads are sequential and then prefetch.
Update the last block read after cache hit to take reads from cache also
in account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394
Test Plan: Add new unit test case
Reviewed By: anand1976
Differential Revision: D23737617
Pulled By: akankshamahajan15
fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3
Summary:
Don't call ```rocksdb_cache_disown_data()``` as it causes the memory allocated for ```shards_``` to be leaked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8237
Reviewed By: jay-zhuang
Differential Revision: D28039061
Pulled By: anand1976
fbshipit-source-id: c3464efe2c006b93b4be87030116a12a124598c4
Summary:
This is to try to resolve the VS2015 install failure in CircleCI Windows builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8220
Reviewed By: jay-zhuang
Differential Revision: D28061834
Pulled By: anand1976
fbshipit-source-id: b2663eb60babee603669a2c2cb55f182df1cc7b1
Summary:
DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place.
If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully.
This option is enabled in crash test in half of the time.
Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235
Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory.
Reviewed By: anand1976
Differential Revision: D28010944
fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558
Summary:
Add 6.18, 6.19 and 6.20 to check_format_compatible.sh
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8236
Test Plan: ./tools/check_format_compatible.sh (tested without 2.7.fb as it was failing as mentioned in the script)
Reviewed By: mrambacher
Differential Revision: D28019160
Pulled By: akankshamahajan15
fbshipit-source-id: b59a7c5c14cb4c115926e9ae7c74ea586b22c9ed
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
As previously coded, a Configurable extension would need access to code not in the public API. This change moves RegisterOptions into the Configurable class and therefore available to public extensions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8223
Reviewed By: anand1976
Differential Revision: D27960188
Pulled By: mrambacher
fbshipit-source-id: ac88b19397183df633902def5b5701b9b65fbf40
Summary:
The block_based_table_builder buffers some blocks in memory to construct a good compression dictionary. Before this commit, the keys from each block were buffered separately for convenience. However, the buffered block data implicitly contains all keys. This commit eliminates the redundant key buffers and reduces memory usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8219
Reviewed By: ajkr
Differential Revision: D27945851
Pulled By: saketh-are
fbshipit-source-id: caf3cac1217201e080a1e24b542bedf20973afee
Summary:
Add new C APIs to create the JemallocNodumpAllocator and set it on a Cache object.
`make test` passes with and without `DISABLE_JEMALLOC=1`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8178
Reviewed By: jay-zhuang
Differential Revision: D27944631
Pulled By: ajkr
fbshipit-source-id: 2531729aa285a8985c58f22f093c4d53029c4a7b
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
Add compaction API for secondary instance, which compact the files to a secondary DB path without installing to the LSM tree.
The API will be used to remote compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8171
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D27694545
Pulled By: jay-zhuang
fbshipit-source-id: 8ff3ec1bffdb2e1becee994918850c8902caf731
Summary:
In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue.
Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here.
Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207
Test Plan: added unit test, make crash_test
Reviewed By: riversand963
Differential Revision: D27898839
Pulled By: zhichao-cao
fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e
Summary:
For some compilers/environments (e.g. Clang, riscv64), we need to link against -latomic. Check if this is a requirement and add the library to the third-party libs if it is.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8183
Reviewed By: pdillinger
Differential Revision: D27773564
Pulled By: mrambacher
fbshipit-source-id: 68e15d823144f83fb02221c7bf5b1e43323419bf
Summary:
RocksDB allows user-specified custom comparators which may not be known to `ldb`,
a built-in tool for checking/mutating the database. Therefore, column family comparator
names mismatch encountered during manifest dump should not prevent the dumping from
proceeding.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8216
Test Plan:
```
make check
```
Also manually do the following
```
KEEP_DB=1 ./db_with_timestamp_basic_test
./ldb --db=<db> manifest_dump --verbose
```
The ldb should succeed and print something like:
```
...
--------------- Column family "default" (ID 0) --------------
log number: 6
comparator: <TestComparator>, but the comparator object is not available.
...
```
Reviewed By: ltamasi
Differential Revision: D27927581
Pulled By: riversand963
fbshipit-source-id: f610b2c842187d17f575362070209ee6b74ec6d4
Summary:
Add comment to DisableManualCompaction() which was missing.
Also explictly return from DBImpl::CompactRange() to avoid memtable flush when manual compaction is disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8186
Test Plan: Run existing unit tests.
Reviewed By: jay-zhuang
Differential Revision: D27744517
fbshipit-source-id: 449548a48905903b888dc9612bd17480f6596a71
Summary:
When WriteBufferManager is shared across DBs and column families
to maintain memory usage under a limit, OOMs have been observed when flush cannot
finish but writes continuously insert to memtables.
In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write,
this change will stall incoming writers until flush is completed and memory_usage
drops.
Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_
(memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true.
DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall()
(which adds dummy stall object to the writer's queue).
Then DB is blocked on a state State::Blocked (current write doesn't go
through). WBStallInterface object maintained by every DB instance is added to the queue of
WriteBufferManager.
If multiple DBs tries to write during this stall, they will also be
blocked when check WriteBufferManager::ShouldStall() returns true.
End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory
waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush
to complete and avoid continous stalling if memory usage remains close to buffer_size.
WriterBufferManager::EndWriteStall() is called,
which removes all instances from its queue and signal them to continue.
Their state is changed to State::Running and they are unblocked. DBImpl
then signal all incoming writers of that DB to continue by calling
write_thread_.EndWriteStall() (which removes dummy stall object from the
queue).
DB instance creates WBMStallInterface which is an interface to block and
signal DBs during stall.
When DB needs to be blocked or signalled by WriteBufferManager,
state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898
Test Plan: Added a new test db/db_write_buffer_manager_test.cc
Reviewed By: anand1976
Differential Revision: D26093227
Pulled By: akankshamahajan15
fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8208
Make include of "file_system.h" use the same include path as everywhere
else.
Reviewed By: riversand963, akankshamahajan15
Differential Revision: D27881606
fbshipit-source-id: fc1e076229fde21041a813c655ce017b5070c8b3
Summary:
Fixes https://github.com/facebook/rocksdb/issues/6245.
Adapted from https://github.com/facebook/rocksdb/issues/8201 and https://github.com/facebook/rocksdb/issues/8205.
Previously we were writing the ingested file's smallest/largest internal keys
with sequence number zero, or `kMaxSequenceNumber` in case of range
tombstone. The former (sequence number zero) is incorrect and can lead
to files being incorrectly ordered. The fix in this PR is to overwrite
boundary keys that have sequence number zero with the ingested file's assigned
sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8209
Test Plan: repro unit test
Reviewed By: riversand963
Differential Revision: D27885678
Pulled By: ajkr
fbshipit-source-id: 4a9f2c6efdfff81c3a9923e915ea88b250ee7b6a
Jay Zhuang