You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
rocksdb/thrift/folly/experimental/io/IOBuf.h

1050 lines
36 KiB

/*
* Copyright 2012 Facebook, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef FOLLY_IO_IOBUF_H_
#define FOLLY_IO_IOBUF_H_
#include <atomic>
#include <cassert>
#include <cinttypes>
#include <cstddef>
#include <cstring>
#include <memory>
#include <limits>
#include <type_traits>
#include <folly/experimental/io/check.h>
namespace folly {
/**
* An IOBuf is a pointer to a buffer of data.
*
* IOBuf objects are intended to be used primarily for networking code, and are
* modelled somewhat after FreeBSD's mbuf data structure, and Linux's sk_buff
* structure.
*
* IOBuf objects facilitate zero-copy network programming, by allowing multiple
* IOBuf objects to point to the same underlying buffer of data, using a
* reference count to track when the buffer is no longer needed and can be
* freed.
*
*
* Data Layout
* -----------
*
* The IOBuf itself is a small object containing a pointer to the buffer and
* information about which segment of the buffer contains valid data.
*
* The data layout looks like this:
*
* +-------+
* | IOBuf |
* +-------+
* /
* |
* v
* +------------+--------------------+-----------+
* | headroom | data | tailroom |
* +------------+--------------------+-----------+
* ^ ^ ^ ^
* buffer() data() tail() bufferEnd()
*
* The length() method returns the length of the valid data; capacity()
* returns the entire capacity of the buffer (from buffer() to bufferEnd()).
* The headroom() and tailroom() methods return the amount of unused capacity
* available before and after the data.
*
*
* Buffer Sharing
* --------------
*
* The buffer itself is reference counted, and multiple IOBuf objects may point
* to the same buffer. Each IOBuf may point to a different section of valid
* data within the underlying buffer. For example, if multiple protocol
* requests are read from the network into a single buffer, a separate IOBuf
* may be created for each request, all sharing the same underlying buffer.
*
* In other words, when multiple IOBufs share the same underlying buffer, the
* data() and tail() methods on each IOBuf may point to a different segment of
* the data. However, the buffer() and bufferEnd() methods will point to the
* same location for all IOBufs sharing the same underlying buffer.
*
* +-----------+ +---------+
* | IOBuf 1 | | IOBuf 2 |
* +-----------+ +---------+
* | | _____/ |
* data | tail |/ data | tail
* v v v
* +-------------------------------------+
* | | | | |
* +-------------------------------------+
*
* If you only read data from an IOBuf, you don't need to worry about other
* IOBuf objects possibly sharing the same underlying buffer. However, if you
* ever write to the buffer you need to first ensure that no other IOBufs point
* to the same buffer. The unshare() method may be used to ensure that you
* have an unshared buffer.
*
*
* IOBuf Chains
* ------------
*
* IOBuf objects also contain pointers to next and previous IOBuf objects.
* This can be used to represent a single logical piece of data that its stored
* in non-contiguous chunks in separate buffers.
*
* A single IOBuf object can only belong to one chain at a time.
*
* IOBuf chains are always circular. The "prev" pointer in the head of the
* chain points to the tail of the chain. However, it is up to the user to
* decide which IOBuf is the head. Internally the IOBuf code does not care
* which element is the head.
*
* The lifetime of all IOBufs in the chain are linked: when one element in the
* chain is deleted, all other chained elements are also deleted. Conceptually
* it is simplest to treat this as if the head of the chain owns all other
* IOBufs in the chain. When you delete the head of the chain, it will delete
* the other elements as well. For this reason, prependChain() and
* appendChain() take ownership of of the new elements being added to this
* chain.
*
* When the coalesce() method is used to coalesce an entire IOBuf chain into a
* single IOBuf, all other IOBufs in the chain are eliminated and automatically
* deleted. The unshare() method may coalesce the chain; if it does it will
* similarly delete all IOBufs eliminated from the chain.
*
* As discussed in the following section, it is up to the user to maintain a
* lock around the entire IOBuf chain if multiple threads need to access the
* chain. IOBuf does not provide any internal locking.
*
*
* Synchronization
* ---------------
*
* When used in multithread programs, a single IOBuf object should only be used
* in a single thread at a time. If a caller uses a single IOBuf across
* multiple threads the caller is responsible for using an external lock to
* synchronize access to the IOBuf.
*
* Two separate IOBuf objects may be accessed concurrently in separate threads
* without locking, even if they point to the same underlying buffer. The
* buffer reference count is always accessed atomically, and no other
* operations should affect other IOBufs that point to the same data segment.
* The caller is responsible for using unshare() to ensure that the data buffer
* is not shared by other IOBufs before writing to it, and this ensures that
* the data itself is not modified in one thread while also being accessed from
* another thread.
*
* For IOBuf chains, no two IOBufs in the same chain should be accessed
* simultaneously in separate threads. The caller must maintain a lock around
* the entire chain if the chain, or individual IOBufs in the chain, may be
* accessed by multiple threads.
*
*
* IOBuf Object Allocation/Sharing
* -------------------------------
*
* IOBuf objects themselves are always allocated on the heap. The IOBuf
* constructors are private, so IOBuf objects may not be created on the stack.
* In part this is done since some IOBuf objects use small-buffer optimization
* and contain the buffer data immediately after the IOBuf object itself. The
* coalesce() and unshare() methods also expect to be able to delete subsequent
* IOBuf objects in the chain if they are no longer needed due to coalescing.
*
* The IOBuf structure also does not provide room for an intrusive refcount on
* the IOBuf object itself, only the underlying data buffer is reference
* counted. If users want to share the same IOBuf object between multiple
* parts of the code, they are responsible for managing this sharing on their
* own. (For example, by using a shared_ptr. Alternatively, users always have
* the option of using clone() to create a second IOBuf that points to the same
* underlying buffer.)
*
* With jemalloc, allocating small objects like IOBuf objects should be
* relatively fast, and the cost of allocating IOBuf objects on the heap and
* cloning new IOBufs should be relatively cheap.
*/
namespace detail {
// Is T a unique_ptr<> to a standard-layout type?
template <class T, class Enable=void> struct IsUniquePtrToSL
: public std::false_type { };
template <class T, class D>
struct IsUniquePtrToSL<
std::unique_ptr<T, D>,
typename std::enable_if<std::is_standard_layout<T>::value>::type>
: public std::true_type { };
} // namespace detail
class IOBuf {
public:
typedef void (*FreeFunction)(void* buf, void* userData);
/**
* Allocate a new IOBuf object with the requested capacity.
*
* Returns a new IOBuf object that must be (eventually) deleted by the
* caller. The returned IOBuf may actually have slightly more capacity than
* requested.
*
* The data pointer will initially point to the start of the newly allocated
* buffer, and will have a data length of 0.
*
* Throws std::bad_alloc on error.
*/
static std::unique_ptr<IOBuf> create(uint32_t capacity);
/**
* Create a new IOBuf pointing to an existing data buffer.
*
* The new IOBuffer will assume ownership of the buffer, and free it by
* calling the specified FreeFunction when the last IOBuf pointing to this
* buffer is destroyed. The function will be called with a pointer to the
* buffer as the first argument, and the supplied userData value as the
* second argument. The free function must never throw exceptions.
*
* If no FreeFunction is specified, the buffer will be freed using free().
*
* The IOBuf data pointer will initially point to the start of the buffer,
* and the length will be the full capacity of the buffer.
*
* On error, std::bad_alloc will be thrown. If freeOnError is true (the
* default) the buffer will be freed before throwing the error.
*/
static std::unique_ptr<IOBuf> takeOwnership(void* buf, uint32_t capacity,
FreeFunction freeFn = NULL,
void* userData = NULL,
bool freeOnError = true);
/**
* Create a new IOBuf pointing to an existing data buffer made up of
* count objects of a given standard-layout type.
*
* This is dangerous -- it is essentially equivalent to doing
* reinterpret_cast<unsigned char*> on your data -- but it's often useful
* for serialization / deserialization.
*
* The new IOBuffer will assume ownership of the buffer, and free it
* appropriately (by calling the UniquePtr's custom deleter, or by calling
* delete or delete[] appropriately if there is no custom deleter)
* when the buffer is destroyed. The custom deleter, if any, must never
* throw exceptions.
*
* The IOBuf data pointer will initially point to the start of the buffer,
* and the length will be the full capacity of the buffer (count *
* sizeof(T)).
*
* On error, std::bad_alloc will be thrown, and the buffer will be freed
* before throwing the error.
*/
template <class UniquePtr>
static typename std::enable_if<detail::IsUniquePtrToSL<UniquePtr>::value,
std::unique_ptr<IOBuf>>::type
takeOwnership(UniquePtr&& buf, size_t count=1);
/**
* Create a new IOBuf object that points to an existing user-owned buffer.
*
* This should only be used when the caller knows the lifetime of the IOBuf
* object ahead of time and can ensure that all IOBuf objects that will point
* to this buffer will be destroyed before the buffer itself is destroyed.
*
* This buffer will not be freed automatically when the last IOBuf
* referencing it is destroyed. It is the caller's responsibility to free
* the buffer after the last IOBuf has been destroyed.
*
* The IOBuf data pointer will initially point to the start of the buffer,
* and the length will be the full capacity of the buffer.
*
* An IOBuf created using wrapBuffer() will always be reported as shared.
* unshare() may be used to create a writable copy of the buffer.
*
* On error, std::bad_alloc will be thrown.
*/
static std::unique_ptr<IOBuf> wrapBuffer(const void* buf, uint32_t capacity);
/**
* Convenience function to create a new IOBuf object that copies data from a
* user-supplied buffer, optionally allocating a given amount of
* headroom and tailroom.
*/
static std::unique_ptr<IOBuf> copyBuffer(const void* buf, uint32_t size,
uint32_t headroom=0,
uint32_t minTailroom=0);
/**
* Convenience function to free a chain of IOBufs held by a unique_ptr.
*/
static void destroy(std::unique_ptr<IOBuf>&& data) {
auto destroyer = std::move(data);
}
/**
* Destroy this IOBuf.
*
* Deleting an IOBuf will automatically destroy all IOBufs in the chain.
* (See the comments above regarding the ownership model of IOBuf chains.
* All subsequent IOBufs in the chain are considered to be owned by the head
* of the chain. Users should only explicitly delete the head of a chain.)
*
* When each individual IOBuf is destroyed, it will release its reference
* count on the underlying buffer. If it was the last user of the buffer,
* the buffer will be freed.
*/
~IOBuf();
/**
* Check whether the chain is empty (i.e., whether the IOBufs in the
* chain have a total data length of zero).
*
* This method is semantically equivalent to
* i->computeChainDataLength()==0
* but may run faster because it can short-circuit as soon as it
* encounters a buffer with length()!=0
*/
bool empty() const;
/**
* Get the pointer to the start of the data.
*/
const uint8_t* data() const {
return data_;
}
/**
* Get a writable pointer to the start of the data.
*
* The caller is responsible for calling unshare() first to ensure that it is
* actually safe to write to the buffer.
*/
uint8_t* writableData() {
return data_;
}
/**
* Get the pointer to the end of the data.
*/
const uint8_t* tail() const {
return data_ + length_;
}
/**
* Get a writable pointer to the end of the data.
*
* The caller is responsible for calling unshare() first to ensure that it is
* actually safe to write to the buffer.
*/
uint8_t* writableTail() {
return data_ + length_;
}
/**
* Get the data length.
*/
uint32_t length() const {
return length_;
}
/**
* Get the amount of head room.
*
* Returns the number of bytes in the buffer before the start of the data.
*/
uint32_t headroom() const {
return data_ - buffer();
}
/**
* Get the amount of tail room.
*
* Returns the number of bytes in the buffer after the end of the data.
*/
uint32_t tailroom() const {
return bufferEnd() - tail();
}
/**
* Get the pointer to the start of the buffer.
*
* Note that this is the pointer to the very beginning of the usable buffer,
* not the start of valid data within the buffer. Use the data() method to
* get a pointer to the start of the data within the buffer.
*/
const uint8_t* buffer() const {
return (flags_ & kFlagExt) ? ext_.buf : int_.buf;
}
/**
* Get a writable pointer to the start of the buffer.
*
* The caller is responsible for calling unshare() first to ensure that it is
* actually safe to write to the buffer.
*/
uint8_t* writableBuffer() {
return (flags_ & kFlagExt) ? ext_.buf : int_.buf;
}
/**
* Get the pointer to the end of the buffer.
*
* Note that this is the pointer to the very end of the usable buffer,
* not the end of valid data within the buffer. Use the tail() method to
* get a pointer to the end of the data within the buffer.
*/
const uint8_t* bufferEnd() const {
return (flags_ & kFlagExt) ?
ext_.buf + ext_.capacity :
int_.buf + kMaxInternalDataSize;
}
/**
* Get the total size of the buffer.
*
* This returns the total usable length of the buffer. Use the length()
* method to get the length of the actual valid data in this IOBuf.
*/
uint32_t capacity() const {
return (flags_ & kFlagExt) ? ext_.capacity : kMaxInternalDataSize;
}
/**
* Get a pointer to the next IOBuf in this chain.
*/
IOBuf* next() {
return next_;
}
const IOBuf* next() const {
return next_;
}
/**
* Get a pointer to the previous IOBuf in this chain.
*/
IOBuf* prev() {
return prev_;
}
const IOBuf* prev() const {
return prev_;
}
/**
* Shift the data forwards in the buffer.
*
* This shifts the data pointer forwards in the buffer to increase the
* headroom. This is commonly used to increase the headroom in a newly
* allocated buffer.
*
* The caller is responsible for ensuring that there is sufficient
* tailroom in the buffer before calling advance().
*
* If there is a non-zero data length, advance() will use memmove() to shift
* the data forwards in the buffer. In this case, the caller is responsible
* for making sure the buffer is unshared, so it will not affect other IOBufs
* that may be sharing the same underlying buffer.
*/
void advance(uint32_t amount) {
// In debug builds, assert if there is a problem.
assert(amount <= tailroom());
if (length_ > 0) {
memmove(data_ + amount, data_, length_);
}
data_ += amount;
}
/**
* Shift the data backwards in the buffer.
*
* The caller is responsible for ensuring that there is sufficient headroom
* in the buffer before calling retreat().
*
* If there is a non-zero data length, retreat() will use memmove() to shift
* the data backwards in the buffer. In this case, the caller is responsible
* for making sure the buffer is unshared, so it will not affect other IOBufs
* that may be sharing the same underlying buffer.
*/
void retreat(uint32_t amount) {
// In debug builds, assert if there is a problem.
assert(amount <= headroom());
if (length_ > 0) {
memmove(data_ - amount, data_, length_);
}
data_ -= amount;
}
/**
* Adjust the data pointer to include more valid data at the beginning.
*
* This moves the data pointer backwards to include more of the available
* buffer. The caller is responsible for ensuring that there is sufficient
* headroom for the new data. The caller is also responsible for populating
* this section with valid data.
*
* This does not modify any actual data in the buffer.
*/
void prepend(uint32_t amount) {
CHECK(amount <= headroom());
data_ -= amount;
}
/**
* Adjust the tail pointer to include more valid data at the end.
*
* This moves the tail pointer forwards to include more of the available
* buffer. The caller is responsible for ensuring that there is sufficient
* tailroom for the new data. The caller is also responsible for populating
* this section with valid data.
*
* This does not modify any actual data in the buffer.
*/
void append(uint32_t amount) {
CHECK(amount <= tailroom());
length_ += amount;
}
/**
* Adjust the data pointer forwards to include less valid data.
*
* This moves the data pointer forwards so that the first amount bytes are no
* longer considered valid data. The caller is responsible for ensuring that
* amount is less than or equal to the actual data length.
*
* This does not modify any actual data in the buffer.
*/
void trimStart(uint32_t amount) {
CHECK(amount <= length_);
data_ += amount;
length_ -= amount;
}
/**
* Adjust the tail pointer backwards to include less valid data.
*
* This moves the tail pointer backwards so that the last amount bytes are no
* longer considered valid data. The caller is responsible for ensuring that
* amount is less than or equal to the actual data length.
*
* This does not modify any actual data in the buffer.
*/
void trimEnd(uint32_t amount) {
CHECK(amount <= length_);
length_ -= amount;
}
/**
* Clear the buffer.
*
* Postcondition: headroom() == 0, length() == 0, tailroom() == capacity()
*/
void clear() {
data_ = writableBuffer();
length_ = 0;
}
/**
* Ensure that this buffer has at least minHeadroom headroom bytes and at
* least minTailroom tailroom bytes. The buffer must be writable
* (you must call unshare() before this, if necessary).
*
* Postcondition: headroom() >= minHeadroom, tailroom() >= minTailroom,
* the data (between data() and data() + length()) is preserved.
*/
void reserve(uint32_t minHeadroom, uint32_t minTailroom) {
// Maybe we don't need to do anything.
if (headroom() >= minHeadroom && tailroom() >= minTailroom) {
return;
}
// If the buffer is empty but we have enough total room (head + tail),
// move the data_ pointer around.
if (length() == 0 &&
headroom() + tailroom() >= minHeadroom + minTailroom) {
data_ = writableBuffer() + minHeadroom;
return;
}
// Bah, we have to do actual work.
reserveSlow(minHeadroom, minTailroom);
}
/**
* Return true if this IOBuf is part of a chain of multiple IOBufs, or false
* if this is the only IOBuf in its chain.
*/
bool isChained() const {
assert((next_ == this) == (prev_ == this));
return next_ != this;
}
/**
* Get the number of IOBufs in this chain.
*
* Beware that this method has to walk the entire chain.
* Use isChained() if you just want to check if this IOBuf is part of a chain
* or not.
*/
uint32_t countChainElements() const;
/**
* Get the length of all the data in this IOBuf chain.
*
* Beware that this method has to walk the entire chain.
*/
uint64_t computeChainDataLength() const;
/**
* Insert another IOBuf chain immediately before this IOBuf.
*
* For example, if there are two IOBuf chains (A, B, C) and (D, E, F),
* and B->prependChain(D) is called, the (D, E, F) chain will be subsumed
* and become part of the chain starting at A, which will now look like
* (A, D, E, F, B, C)
*
* Note that since IOBuf chains are circular, head->prependChain(other) can
* be used to append the other chain at the very end of the chain pointed to
* by head. For example, if there are two IOBuf chains (A, B, C) and
* (D, E, F), and A->prependChain(D) is called, the chain starting at A will
* now consist of (A, B, C, D, E, F)
*
* The elements in the specified IOBuf chain will become part of this chain,
* and will be owned by the head of this chain. When this chain is
* destroyed, all elements in the supplied chain will also be destroyed.
*
* For this reason, appendChain() only accepts an rvalue-reference to a
* unique_ptr(), to make it clear that it is taking ownership of the supplied
* chain. If you have a raw pointer, you can pass in a new temporary
* unique_ptr around the raw pointer. If you have an existing,
* non-temporary unique_ptr, you must call std::move(ptr) to make it clear
* that you are destroying the original pointer.
*/
void prependChain(std::unique_ptr<IOBuf>&& iobuf);
/**
* Append another IOBuf chain immediately after this IOBuf.
*
* For example, if there are two IOBuf chains (A, B, C) and (D, E, F),
* and B->appendChain(D) is called, the (D, E, F) chain will be subsumed
* and become part of the chain starting at A, which will now look like
* (A, B, D, E, F, C)
*
* The elements in the specified IOBuf chain will become part of this chain,
* and will be owned by the head of this chain. When this chain is
* destroyed, all elements in the supplied chain will also be destroyed.
*
* For this reason, appendChain() only accepts an rvalue-reference to a
* unique_ptr(), to make it clear that it is taking ownership of the supplied
* chain. If you have a raw pointer, you can pass in a new temporary
* unique_ptr around the raw pointer. If you have an existing,
* non-temporary unique_ptr, you must call std::move(ptr) to make it clear
* that you are destroying the original pointer.
*/
void appendChain(std::unique_ptr<IOBuf>&& iobuf) {
// Just use prependChain() on the next element in our chain
next_->prependChain(std::move(iobuf));
}
/**
* Remove this IOBuf from its current chain.
*
* Since ownership of all elements an IOBuf chain is normally maintained by
* the head of the chain, unlink() transfers ownership of this IOBuf from the
* chain and gives it to the caller. A new unique_ptr to the IOBuf is
* returned to the caller. The caller must store the returned unique_ptr (or
* call release() on it) to take ownership, otherwise the IOBuf will be
* immediately destroyed.
*
* Since unlink transfers ownership of the IOBuf to the caller, be careful
* not to call unlink() on the head of a chain if you already maintain
* ownership on the head of the chain via other means. The pop() method
* is a better choice for that situation.
*/
std::unique_ptr<IOBuf> unlink() {
next_->prev_ = prev_;
prev_->next_ = next_;
prev_ = this;
next_ = this;
return std::unique_ptr<IOBuf>(this);
}
/**
* Remove this IOBuf from its current chain and return a unique_ptr to
* the IOBuf that formerly followed it in the chain.
*/
std::unique_ptr<IOBuf> pop() {
IOBuf *next = next_;
next_->prev_ = prev_;
prev_->next_ = next_;
prev_ = this;
next_ = this;
return std::unique_ptr<IOBuf>((next == this) ? NULL : next);
}
/**
* Remove a subchain from this chain.
*
* Remove the subchain starting at head and ending at tail from this chain.
*
* Returns a unique_ptr pointing to head. (In other words, ownership of the
* head of the subchain is transferred to the caller.) If the caller ignores
* the return value and lets the unique_ptr be destroyed, the subchain will
* be immediately destroyed.
*
* The subchain referenced by the specified head and tail must be part of the
* same chain as the current IOBuf, but must not contain the current IOBuf.
* However, the specified head and tail may be equal to each other (i.e.,
* they may be a subchain of length 1).
*/
std::unique_ptr<IOBuf> separateChain(IOBuf* head, IOBuf* tail) {
assert(head != this);
assert(tail != this);
head->prev_->next_ = tail->next_;
tail->next_->prev_ = head->prev_;
head->prev_ = tail;
tail->next_ = head;
return std::unique_ptr<IOBuf>(head);
}
/**
* Return true if at least one of the IOBufs in this chain are shared,
* or false if all of the IOBufs point to unique buffers.
*
* Use isSharedOne() to only check this IOBuf rather than the entire chain.
*/
bool isShared() const {
const IOBuf* current = this;
while (true) {
if (current->isSharedOne()) {
return true;
}
current = current->next_;
if (current == this) {
return false;
}
}
}
/**
* Return true if other IOBufs are also pointing to the buffer used by this
* IOBuf, and false otherwise.
*
* If this IOBuf points at a buffer owned by another (non-IOBuf) part of the
* code (i.e., if the IOBuf was created using wrapBuffer(), or was cloned
* from such an IOBuf), it is always considered shared.
*
* This only checks the current IOBuf, and not other IOBufs in the chain.
*/
bool isSharedOne() const {
// If this is a user-owned buffer, it is always considered shared
if (flags_ & kFlagUserOwned) {
return true;
}
if (flags_ & kFlagExt) {
return ext_.sharedInfo->refcount.load(std::memory_order_acquire) > 1;
} else {
return false;
}
}
/**
* Ensure that this IOBuf has a unique buffer that is not shared by other
* IOBufs.
*
* unshare() operates on an entire chain of IOBuf objects. If the chain is
* shared, it may also coalesce the chain when making it unique. If the
* chain is coalesced, subsequent IOBuf objects in the current chain will be
* automatically deleted.
*
* Note that buffers owned by other (non-IOBuf) users are automatically
* considered shared.
*
* Throws std::bad_alloc on error. On error the IOBuf chain will be
* unmodified.
*
* Currently unshare may also throw std::overflow_error if it tries to
* coalesce. (TODO: In the future it would be nice if unshare() were smart
* enough not to coalesce the entire buffer if the data is too large.
* However, in practice this seems unlikely to become an issue.)
*/
void unshare() {
if (isChained()) {
unshareChained();
} else {
unshareOne();
}
}
/**
* Ensure that this IOBuf has a unique buffer that is not shared by other
* IOBufs.
*
* unshareOne() operates on a single IOBuf object. This IOBuf will have a
* unique buffer after unshareOne() returns, but other IOBufs in the chain
* may still be shared after unshareOne() returns.
*
* Throws std::bad_alloc on error. On error the IOBuf will be unmodified.
*/
void unshareOne() {
if (isSharedOne()) {
unshareOneSlow();
}
}
/**
* Coalesce this IOBuf chain into a single buffer.
*
* This method moves all of the data in this IOBuf chain into a single
* contiguous buffer, if it is not already in one buffer. After coalesce()
* returns, this IOBuf will be a chain of length one. Other IOBufs in the
* chain will be automatically deleted.
*
* After coalescing, the IOBuf will have at least as much headroom as the
* first IOBuf in the chain, and at least as much tailroom as the last IOBuf
* in the chain.
*
* Throws std::bad_alloc on error. On error the IOBuf chain will be
* unmodified. Throws std::overflow_error if the length of the entire chain
* larger than can be described by a uint32_t capacity.
*/
void coalesce() {
if (!isChained()) {
return;
}
coalesceSlow();
}
/**
* Ensure that this chain has at least maxLength bytes available as a
* contiguous memory range.
*
* This method coalesces whole buffers in the chain into this buffer as
* necessary until this buffer's length() is at least maxLength.
*
* After coalescing, the IOBuf will have at least as much headroom as the
* first IOBuf in the chain, and at least as much tailroom as the last IOBuf
* that was coalesced.
*
* Throws std::bad_alloc on error. On error the IOBuf chain will be
* unmodified. Throws std::overflow_error if the length of the coalesced
* portion of the chain is larger than can be described by a uint32_t
* capacity. (Although maxLength is uint32_t, gather() doesn't split
* buffers, so coalescing whole buffers may result in a capacity that can't
* be described in uint32_t.
*
* Upon return, either enough of the chain was coalesced into a contiguous
* region, or the entire chain was coalesced. That is,
* length() >= maxLength || !isChained() is true.
*/
void gather(uint32_t maxLength) {
if (!isChained() || length_ >= maxLength) {
return;
}
coalesceSlow(maxLength);
}
/**
* Return a new IOBuf chain sharing the same data as this chain.
*
* The new IOBuf chain will normally point to the same underlying data
* buffers as the original chain. (The one exception to this is if some of
* the IOBufs in this chain contain small internal data buffers which cannot
* be shared.)
*/
std::unique_ptr<IOBuf> clone() const;
/**
* Return a new IOBuf with the same data as this IOBuf.
*
* The new IOBuf returned will not be part of a chain (even if this IOBuf is
* part of a larger chain).
*/
std::unique_ptr<IOBuf> cloneOne() const;
// Overridden operator new and delete.
// These directly use malloc() and free() to allocate the space for IOBuf
// objects. This is needed since IOBuf::create() manually uses malloc when
// allocating IOBuf objects with an internal buffer.
void* operator new(size_t size);
void* operator new(size_t size, void* ptr);
void operator delete(void* ptr);
private:
enum FlagsEnum {
kFlagExt = 0x1,
kFlagUserOwned = 0x2,
kFlagFreeSharedInfo = 0x4,
};
// Values for the ExternalBuf type field.
// We currently don't really use this for anything, other than to have it
// around for debugging purposes. We store it at the moment just because we
// have the 4 extra bytes in the ExternalBuf struct that would just be
// padding otherwise.
enum ExtBufTypeEnum {
kExtAllocated = 0,
kExtUserSupplied = 1,
kExtUserOwned = 2,
};
struct SharedInfo {
SharedInfo();
SharedInfo(FreeFunction fn, void* arg);
// A pointer to a function to call to free the buffer when the refcount
// hits 0. If this is NULL, free() will be used instead.
FreeFunction freeFn;
void* userData;
std::atomic<uint32_t> refcount;
};
struct ExternalBuf {
uint32_t capacity;
uint32_t type;
uint8_t* buf;
// SharedInfo may be NULL if kFlagUserOwned is set. It is non-NULL
// in all other cases.
SharedInfo* sharedInfo;
};
struct InternalBuf {
uint8_t buf[] __attribute__((aligned));
};
// The maximum size for an IOBuf object, including any internal data buffer
static const uint32_t kMaxIOBufSize = 256;
static const uint32_t kMaxInternalDataSize;
// Forbidden copy constructor and assignment opererator
IOBuf(IOBuf const &);
IOBuf& operator=(IOBuf const &);
/**
* Create a new IOBuf with internal data.
*
* end is a pointer to the end of the IOBuf's internal data buffer.
*/
explicit IOBuf(uint8_t* end);
/**
* Create a new IOBuf pointing to an external buffer.
*
* The caller is responsible for holding a reference count for this new
* IOBuf. The IOBuf constructor does not automatically increment the
* reference count.
*/
IOBuf(ExtBufTypeEnum type, uint32_t flags,
uint8_t* buf, uint32_t capacity,
uint8_t* data, uint32_t length,
SharedInfo* sharedInfo);
void unshareOneSlow();
void unshareChained();
void coalesceSlow(size_t maxLength=std::numeric_limits<size_t>::max());
void decrementRefcount();
void reserveSlow(uint32_t minHeadroom, uint32_t minTailroom);
static size_t goodExtBufferSize(uint32_t minCapacity);
static void initExtBuffer(uint8_t* buf, size_t mallocSize,
SharedInfo** infoReturn,
uint32_t* capacityReturn);
static void allocExtBuffer(uint32_t minCapacity,
uint8_t** bufReturn,
SharedInfo** infoReturn,
uint32_t* capacityReturn);
/*
* Member variables
*/
/*
* Links to the next and the previous IOBuf in this chain.
*
* The chain is circularly linked (the last element in the chain points back
* at the head), and next_ and prev_ can never be NULL. If this IOBuf is the
* only element in the chain, next_ and prev_ will both point to this.
*/
IOBuf* next_;
IOBuf* prev_;
/*
* A pointer to the start of the data referenced by this IOBuf, and the
* length of the data.
*
* This may refer to any subsection of the actual buffer capacity.
*/
uint8_t* data_;
uint32_t length_;
uint32_t flags_;
union {
ExternalBuf ext_;
InternalBuf int_;
};
struct DeleterBase {
virtual ~DeleterBase() { }
virtual void dispose(void* p) = 0;
};
template <class UniquePtr>
struct UniquePtrDeleter : public DeleterBase {
typedef typename UniquePtr::pointer Pointer;
typedef typename UniquePtr::deleter_type Deleter;
explicit UniquePtrDeleter(Deleter deleter) : deleter_(std::move(deleter)){ }
void dispose(void* p) {
try {
deleter_(static_cast<Pointer>(p));
delete this;
} catch (...) {
abort();
}
}
private:
Deleter deleter_;
};
static void freeUniquePtrBuffer(void* ptr, void* userData) {
static_cast<DeleterBase*>(userData)->dispose(ptr);
}
};
template <class UniquePtr>
typename std::enable_if<detail::IsUniquePtrToSL<UniquePtr>::value,
std::unique_ptr<IOBuf>>::type
IOBuf::takeOwnership(UniquePtr&& buf, size_t count) {
size_t size = count * sizeof(typename UniquePtr::element_type);
CHECK_LT(size, size_t(std::numeric_limits<uint32_t>::max()));
auto deleter = new UniquePtrDeleter<UniquePtr>(buf.get_deleter());
return takeOwnership(buf.release(),
size,
&IOBuf::freeUniquePtrBuffer,
deleter);
}
inline std::unique_ptr<IOBuf> IOBuf::copyBuffer(
const void* data, uint32_t size, uint32_t headroom,
uint32_t minTailroom) {
uint32_t capacity = headroom + size + minTailroom;
std::unique_ptr<IOBuf> buf = create(capacity);
buf->advance(headroom);
memcpy(buf->writableData(), data, size);
buf->append(size);
return buf;
}
} // folly
#endif // FOLLY_IO_IOBUF_H_