You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
rocksdb/util/bloom_impl.h

336 lines
14 KiB

// Copyright (c) 2019-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Implementation details of various Bloom filter implementations used in
// RocksDB. (DynamicBloom is in a separate file for now because it
// supports concurrent write.)
#pragma once
#include <stddef.h>
#include <stdint.h>
#include "rocksdb/slice.h"
#include "util/hash.h"
#ifdef HAVE_AVX2
#include <immintrin.h>
#endif
namespace rocksdb {
// A fast, flexible, and accurate cache-local Bloom implementation with
// SIMD-optimized query performance (currently using AVX2 on Intel). Write
// performance and non-SIMD read are very good, benefiting from fastrange32
// used in place of % and single-cycle multiplication on recent processors.
//
// Most other SIMD Bloom implementations sacrifice flexibility and/or
// accuracy by requiring num_probes to be a power of two and restricting
// where each probe can occur in a cache line. This implementation sacrifices
// SIMD-optimization for add (might still be possible, especially with AVX512)
// in favor of allowing any num_probes, not crossing cache line boundary,
// and accuracy close to theoretical best accuracy for a cache-local Bloom.
// E.g. theoretical best for 10 bits/key, num_probes=6, and 512-bit bucket
// (Intel cache line size) is 0.9535% FP rate. This implementation yields
// about 0.957%. (Compare to LegacyLocalityBloomImpl<false> at 1.138%, or
// about 0.951% for 1024-bit buckets, cache line size for some ARM CPUs.)
//
// This implementation can use a 32-bit hash (let h2 be h1 * 0x9e3779b9) or
// a 64-bit hash (split into two uint32s). With many millions of keys, the
// false positive rate associated with using a 32-bit hash can dominate the
// false positive rate of the underlying filter. At 10 bits/key setting, the
// inflection point is about 40 million keys, so 32-bit hash is a bad idea
// with 10s of millions of keys or more.
//
// Despite accepting a 64-bit hash, this implementation uses 32-bit fastrange
// to pick a cache line, which can be faster than 64-bit in some cases.
// This only hurts accuracy as you get into 10s of GB for a single filter,
// and accuracy abruptly breaks down at 256GB (2^32 cache lines). Switch to
// 64-bit fastrange if you need filters so big. ;)
//
// Using only a 32-bit input hash within each cache line has negligible
// impact for any reasonable cache line / bucket size, for arbitrary filter
// size, and potentially saves intermediate data size in some cases vs.
// tracking full 64 bits. (Even in an implementation using 64-bit arithmetic
// to generate indices, I might do the same, as a single multiplication
// suffices to generate a sufficiently mixed 64 bits from 32 bits.)
//
// This implementation is currently tied to Intel cache line size, 64 bytes ==
// 512 bits. If there's sufficient demand for other cache line sizes, this is
// a pretty good implementation to extend, but slight performance enhancements
// are possible with an alternate implementation (probably not very compatible
// with SIMD):
// (1) Use rotation in addition to multiplication for remixing
// (like murmur hash). (Using multiplication alone *slightly* hurts accuracy
// because lower bits never depend on original upper bits.)
// (2) Extract more than one bit index from each re-mix. (Only if rotation
// or similar is part of remix, because otherwise you're making the
// multiplication-only problem worse.)
// (3) Re-mix full 64 bit hash, to get maximum number of bit indices per
// re-mix.
//
class FastLocalBloomImpl {
public:
static inline void AddHash(uint32_t h1, uint32_t h2, uint32_t len_bytes,
int num_probes, char *data) {
uint32_t bytes_to_cache_line = fastrange32(len_bytes >> 6, h1) << 6;
AddHashPrepared(h2, num_probes, data + bytes_to_cache_line);
}
static inline void AddHashPrepared(uint32_t h2, int num_probes,
char *data_at_cache_line) {
uint32_t h = h2;
for (int i = 0; i < num_probes; ++i, h *= uint32_t{0x9e3779b9}) {
// 9-bit address within 512 bit cache line
int bitpos = h >> (32 - 9);
data_at_cache_line[bitpos >> 3] |= (uint8_t{1} << (bitpos & 7));
}
}
static inline void PrepareHash(uint32_t h1, uint32_t len_bytes,
const char *data,
uint32_t /*out*/ *byte_offset) {
uint32_t bytes_to_cache_line = fastrange32(len_bytes >> 6, h1) << 6;
PREFETCH(data + bytes_to_cache_line, 0 /* rw */, 1 /* locality */);
PREFETCH(data + bytes_to_cache_line + 63, 0 /* rw */, 1 /* locality */);
*byte_offset = bytes_to_cache_line;
}
static inline bool HashMayMatch(uint32_t h1, uint32_t h2, uint32_t len_bytes,
int num_probes, const char *data) {
uint32_t bytes_to_cache_line = fastrange32(len_bytes >> 6, h1) << 6;
return HashMayMatchPrepared(h2, num_probes, data + bytes_to_cache_line);
}
static inline bool HashMayMatchPrepared(uint32_t h2, int num_probes,
const char *data_at_cache_line) {
uint32_t h = h2;
#ifdef HAVE_AVX2
int rem_probes = num_probes;
// NOTE: For better performance for num_probes in {1, 2, 9, 10, 17, 18,
// etc.} one can insert specialized code for rem_probes <= 2, bypassing
// the SIMD code in those cases. There is a detectable but minor overhead
// applied to other values of num_probes (when not statically determined),
// but smoother performance curve vs. num_probes. But for now, when
// in doubt, don't add unnecessary code.
// Powers of 32-bit golden ratio, mod 2**32.
const __m256i multipliers =
_mm256_setr_epi32(0x00000001, 0x9e3779b9, 0xe35e67b1, 0x734297e9,
0x35fbe861, 0xdeb7c719, 0x448b211, 0x3459b749);
for (;;) {
// Eight copies of hash
__m256i hash_vector = _mm256_set1_epi32(h);
// Same effect as repeated multiplication by 0x9e3779b9 thanks to
// associativity of multiplication.
hash_vector = _mm256_mullo_epi32(hash_vector, multipliers);
// Now the top 9 bits of each of the eight 32-bit values in
// hash_vector are bit addresses for probes within the cache line.
// While the platform-independent code uses byte addressing (6 bits
// to pick a byte + 3 bits to pick a bit within a byte), here we work
// with 32-bit words (4 bits to pick a word + 5 bits to pick a bit
// within a word) because that works well with AVX2 and is equivalent
// under little-endian.
// Shift each right by 28 bits to get 4-bit word addresses.
const __m256i word_addresses = _mm256_srli_epi32(hash_vector, 28);
// Gather 32-bit values spread over 512 bits by 4-bit address. In
// essence, we are dereferencing eight pointers within the cache
// line.
//
// Option 1: AVX2 gather (seems to be a little slow - understandable)
// const __m256i value_vector =
// _mm256_i32gather_epi32(static_cast<const int
// *>(data_at_cache_line),
// word_addresses,
// /*bytes / i32*/ 4);
// END Option 1
// Potentially unaligned as we're not *always* cache-aligned -> loadu
const __m256i *mm_data =
reinterpret_cast<const __m256i *>(data_at_cache_line);
__m256i lower = _mm256_loadu_si256(mm_data);
__m256i upper = _mm256_loadu_si256(mm_data + 1);
// Option 2: AVX512VL permute hack
// Only negligibly faster than Option 3, so not yet worth supporting
// const __m256i value_vector =
// _mm256_permutex2var_epi32(lower, word_addresses, upper);
// END Option 2
// Option 3: AVX2 permute+blend hack
// Use lowest three bits to order probing values, as if all from same
// 256 bit piece.
lower = _mm256_permutevar8x32_epi32(lower, word_addresses);
upper = _mm256_permutevar8x32_epi32(upper, word_addresses);
// Just top 1 bit of address, to select between lower and upper.
const __m256i upper_lower_selector = _mm256_srai_epi32(hash_vector, 31);
// Finally: the next 8 probed 32-bit values, in probing sequence order.
const __m256i value_vector =
_mm256_blendv_epi8(lower, upper, upper_lower_selector);
// END Option 3
// We might not need to probe all 8, so build a mask for selecting only
// what we need. (The k_selector(s) could be pre-computed but that
// doesn't seem to make a noticeable performance difference.)
const __m256i zero_to_seven = _mm256_setr_epi32(0, 1, 2, 3, 4, 5, 6, 7);
// Subtract rem_probes from each of those constants
__m256i k_selector =
_mm256_sub_epi32(zero_to_seven, _mm256_set1_epi32(rem_probes));
// Negative after subtract -> use/select
// Keep only high bit (logical shift right each by 31).
k_selector = _mm256_srli_epi32(k_selector, 31);
// Strip off the 4 bit word address (shift left)
__m256i bit_addresses = _mm256_slli_epi32(hash_vector, 4);
// And keep only 5-bit (32 - 27) bit-within-32-bit-word addresses.
bit_addresses = _mm256_srli_epi32(bit_addresses, 27);
// Build a bit mask
const __m256i bit_mask = _mm256_sllv_epi32(k_selector, bit_addresses);
// Like ((~value_vector) & bit_mask) == 0)
bool match = _mm256_testc_si256(value_vector, bit_mask) != 0;
// This check first so that it's easy for branch predictor to optimize
// num_probes <= 8 case, making it free of unpredictable branches.
if (rem_probes <= 8) {
return match;
} else if (!match) {
return false;
}
// otherwise
// Need another iteration. 0xab25f4c1 == golden ratio to the 8th power
h *= 0xab25f4c1;
rem_probes -= 8;
}
#else
for (int i = 0; i < num_probes; ++i, h *= uint32_t{0x9e3779b9}) {
// 9-bit address within 512 bit cache line
int bitpos = h >> (32 - 9);
if ((data_at_cache_line[bitpos >> 3] & (char(1) << (bitpos & 7))) == 0) {
return false;
}
}
return true;
#endif
}
};
// A legacy Bloom filter implementation with no locality of probes (slow).
// It uses double hashing to generate a sequence of hash values.
// Asymptotic analysis is in [Kirsch,Mitzenmacher 2006], but known to have
// subtle accuracy flaws for practical sizes [Dillinger,Manolios 2004].
//
// DO NOT REUSE
//
class LegacyNoLocalityBloomImpl {
public:
static inline void AddHash(uint32_t h, uint32_t total_bits, int num_probes,
char *data) {
const uint32_t delta = (h >> 17) | (h << 15); // Rotate right 17 bits
for (int i = 0; i < num_probes; i++) {
const uint32_t bitpos = h % total_bits;
data[bitpos / 8] |= (1 << (bitpos % 8));
h += delta;
}
}
static inline bool HashMayMatch(uint32_t h, uint32_t total_bits,
int num_probes, const char *data) {
const uint32_t delta = (h >> 17) | (h << 15); // Rotate right 17 bits
for (int i = 0; i < num_probes; i++) {
const uint32_t bitpos = h % total_bits;
if ((data[bitpos / 8] & (1 << (bitpos % 8))) == 0) {
return false;
}
h += delta;
}
return true;
}
};
// A legacy Bloom filter implementation with probes local to a single
// cache line (fast). Because SST files might be transported between
// platforms, the cache line size is a parameter rather than hard coded.
// (But if specified as a constant parameter, an optimizing compiler
// should take advantage of that.)
//
// When ExtraRotates is false, this implementation is notably deficient in
// accuracy. Specifically, it uses double hashing with a 1/512 chance of the
// increment being zero (when cache line size is 512 bits). Thus, there's a
// 1/512 chance of probing only one index, which we'd expect to incur about
// a 1/2 * 1/512 or absolute 0.1% FP rate penalty. More detail at
// https://github.com/facebook/rocksdb/issues/4120
//
// DO NOT REUSE
//
template <bool ExtraRotates>
class LegacyLocalityBloomImpl {
private:
static inline uint32_t GetLine(uint32_t h, uint32_t num_lines) {
uint32_t offset_h = ExtraRotates ? (h >> 11) | (h << 21) : h;
return offset_h % num_lines;
}
public:
static inline void AddHash(uint32_t h, uint32_t num_lines, int num_probes,
char *data, int log2_cache_line_bytes) {
const int log2_cache_line_bits = log2_cache_line_bytes + 3;
char *data_at_offset =
data + (GetLine(h, num_lines) << log2_cache_line_bytes);
const uint32_t delta = (h >> 17) | (h << 15);
for (int i = 0; i < num_probes; ++i) {
// Mask to bit-within-cache-line address
const uint32_t bitpos = h & ((1 << log2_cache_line_bits) - 1);
data_at_offset[bitpos / 8] |= (1 << (bitpos % 8));
if (ExtraRotates) {
h = (h >> log2_cache_line_bits) | (h << (32 - log2_cache_line_bits));
}
h += delta;
}
}
static inline void PrepareHashMayMatch(uint32_t h, uint32_t num_lines,
const char *data,
uint32_t /*out*/ *byte_offset,
int log2_cache_line_bytes) {
uint32_t b = GetLine(h, num_lines) << log2_cache_line_bytes;
PREFETCH(data + b, 0 /* rw */, 1 /* locality */);
PREFETCH(data + b + ((1 << log2_cache_line_bytes) - 1), 0 /* rw */,
1 /* locality */);
*byte_offset = b;
}
static inline bool HashMayMatch(uint32_t h, uint32_t num_lines,
int num_probes, const char *data,
int log2_cache_line_bytes) {
uint32_t b = GetLine(h, num_lines) << log2_cache_line_bytes;
return HashMayMatchPrepared(h, num_probes, data + b, log2_cache_line_bytes);
}
static inline bool HashMayMatchPrepared(uint32_t h, int num_probes,
const char *data_at_offset,
int log2_cache_line_bytes) {
const int log2_cache_line_bits = log2_cache_line_bytes + 3;
const uint32_t delta = (h >> 17) | (h << 15);
for (int i = 0; i < num_probes; ++i) {
// Mask to bit-within-cache-line address
const uint32_t bitpos = h & ((1 << log2_cache_line_bits) - 1);
if (((data_at_offset[bitpos / 8]) & (1 << (bitpos % 8))) == 0) {
return false;
}
if (ExtraRotates) {
h = (h >> log2_cache_line_bits) | (h << (32 - log2_cache_line_bits));
}
h += delta;
}
return true;
}
};
} // namespace rocksdb