tungstenite-rs/src/client.rs

//! Methods to connect to a WebSocket as a client.

use std::{
    io::{Read, Write},
    net::{SocketAddr, TcpStream, ToSocketAddrs},
    result::Result as StdResult,
};

use http::{request::Parts, Uri};
use log::*;

use url::Url;

use crate::{
    handshake::client::{Request, Response},
    protocol::WebSocketConfig,
};

#[cfg(feature = "tls")]
mod encryption {
    pub use native_tls::TlsStream;
    use native_tls::{HandshakeError as TlsHandshakeError, TlsConnector};
    use std::net::TcpStream;

    pub use crate::stream::Stream as StreamSwitcher;
    /// TCP stream switcher (plain/TLS).
    pub type AutoStream = StreamSwitcher<TcpStream, TlsStream<TcpStream>>;

    use crate::{error::Result, stream::Mode};

    pub fn wrap_stream(stream: TcpStream, domain: &str, mode: Mode) -> Result<AutoStream> {
        match mode {
            Mode::Plain => Ok(StreamSwitcher::Plain(stream)),
            Mode::Tls => {
                let connector = TlsConnector::builder().build()?;
                connector
                    .connect(domain, stream)
                    .map_err(|e| match e {
                        TlsHandshakeError::Failure(f) => f.into(),
                        TlsHandshakeError::WouldBlock(_) => {
                            panic!("Bug: TLS handshake not blocked")
                        }
                    })
                    .map(StreamSwitcher::Tls)
            }
        }
    }
}

#[cfg(not(feature = "tls"))]
mod encryption {
    use std::net::TcpStream;

    use crate::{
        error::{Error, Result, UrlErrorType},
        stream::Mode,
    };

    /// TLS support is nod compiled in, this is just standard `TcpStream`.
    pub type AutoStream = TcpStream;

    pub fn wrap_stream(stream: TcpStream, _domain: &str, mode: Mode) -> Result<AutoStream> {
        match mode {
            Mode::Plain => Ok(stream),
            Mode::Tls => Err(Error::Url(UrlErrorType::TlsFeatureNotEnabled)),
        }
    }
}

use self::encryption::wrap_stream;
pub use self::encryption::AutoStream;

use crate::{
    error::{Error, Result, UrlErrorType},
    handshake::{client::ClientHandshake, HandshakeError},
    protocol::WebSocket,
    stream::{Mode, NoDelay},
};

/// Connect to the given WebSocket in blocking mode.
///
/// Uses a websocket configuration passed as an argument to the function. Calling it with `None` is
/// equal to calling `connect()` function.
///
/// The URL may be either ws:// or wss://.
/// To support wss:// URLs, feature "tls" must be turned on.
///
/// This function "just works" for those who wants a simple blocking solution
/// similar to `std::net::TcpStream`. If you want a non-blocking or other
/// custom stream, call `client` instead.
///
/// This function uses `native_tls` to do TLS. If you want to use other TLS libraries,
/// use `client` instead. There is no need to enable the "tls" feature if you don't call
/// `connect` since it's the only function that uses native_tls.
pub fn connect_with_config<Req: IntoClientRequest>(
    request: Req,
    config: Option<WebSocketConfig>,
    max_redirects: u8,
) -> Result<(WebSocket<AutoStream>, Response)> {
    fn try_client_handshake(
        request: Request,
        config: Option<WebSocketConfig>,
    ) -> Result<(WebSocket<AutoStream>, Response)> {
        let uri = request.uri();
        let mode = uri_mode(uri)?;
        let host = request.uri().host().ok_or_else(|| Error::Url(UrlErrorType::NoHostName))?;
        let port = uri.port_u16().unwrap_or(match mode {
            Mode::Plain => 80,
            Mode::Tls => 443,
        });
        let addrs = (host, port).to_socket_addrs()?;
        let mut stream = connect_to_some(addrs.as_slice(), &request.uri(), mode)?;
        NoDelay::set_nodelay(&mut stream, true)?;
        client_with_config(request, stream, config).map_err(|e| match e {
            HandshakeError::Failure(f) => f,
            HandshakeError::Interrupted(_) => panic!("Bug: blocking handshake not blocked"),
        })
    }

    fn create_request(parts: &Parts, uri: &Uri) -> Request {
        let mut builder =
            Request::builder().uri(uri.clone()).method(parts.method.clone()).version(parts.version);
        *builder.headers_mut().expect("Failed to create `Request`") = parts.headers.clone();
        builder.body(()).expect("Failed to create `Request`")
    }

    let (parts, _) = request.into_client_request()?.into_parts();
    let mut uri = parts.uri.clone();

    for attempt in 0..(max_redirects + 1) {
        let request = create_request(&parts, &uri);

        match try_client_handshake(request, config) {
            Err(Error::Http(res)) if res.status().is_redirection() && attempt < max_redirects => {
                if let Some(location) = res.headers().get("Location") {
                    uri = location.to_str()?.parse::<Uri>()?;
                    debug!("Redirecting to {:?}", uri);
                    continue;
                } else {
                    warn!("No `Location` found in redirect");
                    return Err(Error::Http(res));
                }
            }
            other => return other,
        }
    }

    unreachable!("Bug in a redirect handling logic")
}

/// Connect to the given WebSocket in blocking mode.
///
/// The URL may be either ws:// or wss://.
/// To support wss:// URLs, feature "tls" must be turned on.
///
/// This function "just works" for those who wants a simple blocking solution
/// similar to `std::net::TcpStream`. If you want a non-blocking or other
/// custom stream, call `client` instead.
///
/// This function uses `native_tls` to do TLS. If you want to use other TLS libraries,
/// use `client` instead. There is no need to enable the "tls" feature if you don't call
/// `connect` since it's the only function that uses native_tls.
pub fn connect<Req: IntoClientRequest>(request: Req) -> Result<(WebSocket<AutoStream>, Response)> {
    connect_with_config(request, None, 3)
}

fn connect_to_some(addrs: &[SocketAddr], uri: &Uri, mode: Mode) -> Result<AutoStream> {
    let domain = uri.host().ok_or_else(|| Error::Url(UrlErrorType::NoHostName))?;
    for addr in addrs {
        debug!("Trying to contact {} at {}...", uri, addr);
        if let Ok(raw_stream) = TcpStream::connect(addr) {
            if let Ok(stream) = wrap_stream(raw_stream, domain, mode) {
                return Ok(stream);
            }
        }
    }
    Err(Error::Url(UrlErrorType::UnableToConnect(uri.to_string())))
}

/// Get the mode of the given URL.
///
/// This function may be used to ease the creation of custom TLS streams
/// in non-blocking algorithmss or for use with TLS libraries other than `native_tls`.
pub fn uri_mode(uri: &Uri) -> Result<Mode> {
    match uri.scheme_str() {
        Some("ws") => Ok(Mode::Plain),
        Some("wss") => Ok(Mode::Tls),
        _ => Err(Error::Url(UrlErrorType::UnsupportedUrlScheme)),
    }
}

/// Do the client handshake over the given stream given a web socket configuration. Passing `None`
/// as configuration is equal to calling `client()` function.
///
/// Use this function if you need a nonblocking handshake support or if you
/// want to use a custom stream like `mio::net::TcpStream` or `openssl::ssl::SslStream`.
/// Any stream supporting `Read + Write` will do.
pub fn client_with_config<Stream, Req>(
    request: Req,
    stream: Stream,
    config: Option<WebSocketConfig>,
) -> StdResult<(WebSocket<Stream>, Response), HandshakeError<ClientHandshake<Stream>>>
where
    Stream: Read + Write,
    Req: IntoClientRequest,
{
    ClientHandshake::start(stream, request.into_client_request()?, config)?.handshake()
}

/// Do the client handshake over the given stream.
///
/// Use this function if you need a nonblocking handshake support or if you
/// want to use a custom stream like `mio::net::TcpStream` or `openssl::ssl::SslStream`.
/// Any stream supporting `Read + Write` will do.
pub fn client<Stream, Req>(
    request: Req,
    stream: Stream,
) -> StdResult<(WebSocket<Stream>, Response), HandshakeError<ClientHandshake<Stream>>>
where
    Stream: Read + Write,
    Req: IntoClientRequest,
{
    client_with_config(request, stream, None)
}

/// Trait for converting various types into HTTP requests used for a client connection.
///
/// This trait is implemented by default for string slices, strings, `url::Url`, `http::Uri` and
/// `http::Request<()>`.
pub trait IntoClientRequest {
    /// Convert into a `Request` that can be used for a client connection.
    fn into_client_request(self) -> Result<Request>;
}

impl<'a> IntoClientRequest for &'a str {
    fn into_client_request(self) -> Result<Request> {
        self.parse::<Uri>()?.into_client_request()
    }
}

impl<'a> IntoClientRequest for &'a String {
    fn into_client_request(self) -> Result<Request> {
        <&str as IntoClientRequest>::into_client_request(self)
    }
}

impl IntoClientRequest for String {
    fn into_client_request(self) -> Result<Request> {
        <&str as IntoClientRequest>::into_client_request(&self)
    }
}

impl<'a> IntoClientRequest for &'a Uri {
    fn into_client_request(self) -> Result<Request> {
        self.clone().into_client_request()
    }
}

impl IntoClientRequest for Uri {
    fn into_client_request(self) -> Result<Request> {
        Ok(Request::get(self).body(())?)
    }
}

impl<'a> IntoClientRequest for &'a Url {
    fn into_client_request(self) -> Result<Request> {
        self.as_str().into_client_request()
    }
}

impl IntoClientRequest for Url {
    fn into_client_request(self) -> Result<Request> {
        self.as_str().into_client_request()
    }
}

impl IntoClientRequest for Request {
    fn into_client_request(self) -> Result<Request> {
        Ok(self)
    }
}

impl<'h, 'b> IntoClientRequest for httparse::Request<'h, 'b> {
    fn into_client_request(self) -> Result<Request> {
        use crate::handshake::headers::FromHttparse;
        Request::from_httparse(self)
    }
}